Develop Bugs

GPRS does not reconnect after disconnection

When I use my GPRS after a soft reset everything work fine but after it disconnects the first connection and I try again, the "G" icon on the top flashes, BA tries to connect but the beast is not able to connect anymore to GPRS. It gives :"Cannot connect for an unknown reason. bla. bla....". I have to reset the radio in order to make it works again.
ROM: 1.40.00 WWE
Radio 1.13.00
Protocol Version: 1337.42
ExtROM: 1.40.556 WWE
Thanks for any help

Anybody know how to fix this - I have the same problem (same rom & radio)
Thank you

You might want to try updating to a different radio ROM. There is a walk through on how to do this on the Wiki.
My BA does this too, but only in certin areas like around my home. In downtown it works perfect.

i have the same problem
i had tried radio version 2.30.xx 2.19.xx

I think there is no solution, it is just native instability of this and other ROM version(s). Mine is the same. I know people using WM5 ROMs wothout this problem.
Anyway, I put the phone in flight mode, wait some seconds, and turn off flight mode - and then connect again to gprs and it works. This way I´ve been avoiding a soft reset.

bluetooth connections lost with WM6

I someone having the same problem as me?
since I installed WM6 on my device (first version 0.2 from Kyphur and now Windows Mobile VI - Black Edition v1.2) I have connection problems with my bluetooth carkit (Toyota Prius).
the pda should make a connection when my car starts, but most of the time the car tells me that the connection failed (not always) and most of the time I need to enable bluetooth in the comm manager on the pda, but have to press the button three time sometime before bluetooth is enabled.
All is well in a conversation, but when it ends and I would like to make a new call via my car, bluetooth is disabled again on the pda.
I didn't have this (many) problems with WM5.
I think I use an old version of the radio rom. Could this be the problem? and does anyone have an idea of what radio rom I should install.
I'm in the Netherlands and use the KPN network.
this is my device information:
ROM version:3.22.200.4
ROM date: 01/04/07
Radio version: 1.16.00.00
Protocol version: 32.53.7018.01H
I never flashed my device before WM6 so I think I have an old bootrom.
Can my problem be solved by installing a newer radio rom?

vulture said:
I someone having the same problem as me?
since I installed WM6 on my device (first version 0.2 from Kyphur and now Windows Mobile VI - Black Edition v1.2) I have connection problems with my bluetooth carkit (Toyota Prius).
the pda should make a connection when my car starts, but most of the time the car tells me that the connection failed (not always) and most of the time I need to enable bluetooth in the comm manager on the pda, but have to press the button three time sometime before bluetooth is enabled.
All is well in a conversation, but when it ends and I would like to make a new call via my car, bluetooth is disabled again on the pda.
I didn't have this (many) problems with WM5.
I think I use an old version of the radio rom. Could this be the problem? and does anyone have an idea of what radio rom I should install.
I'm in the Netherlands and use the KPN network.
this is my device information:
ROM version:3.22.200.4
ROM date: 01/04/07
Radio version: 1.16.00.00
Protocol version: 32.53.7018.01H
I never flashed my device before WM6 so I think I have an old bootrom.
Can my problem be solved by installing a newer radio rom?
Click to expand...
Click to collapse
Similar issue here with WM6 (lvsw 20/3 and black edition 1.2) and Seat Leon Bluetooth Car. If i start the car, pair succesfull, but if i stop PDA (not phone) the car starts loss connection and reconnects several times, and bluetooth goes off. So i need to stay PDA On to work ok (not so difficult, i charge in the car and this prevent to switch off).
I've one more issue with tomtom. When i start tomtom6, the volume in tomtom is deactivateed. If i enter in parameters to activate, the free hands for the car losses the connection, so i need to enter in bloetooth and set the car to Free Hand active. Anyone with similar issues?
I've tested this with one free hands from other manufacturer and works ok, so i think is more a problem with bluetooth for Seat Leon, or the way it works (in my case) thats a problem with TyTN.

vulture said:
Can my problem be solved by installing a newer radio rom?
Click to expand...
Click to collapse
From what I've read (radio flash only affects GSM, not Bluetooth or WiFi), I'd say not likely.

I don't think this has anything to do with a new radio rom, but just for the record there is some improvement.
I have flashed my Hermes with the latest version of LVSW:
20070325_WM6_HERMES_WWE_3.23.0.2_1.38.00.10
and with this version I suddenly have extra info about my phone in my car.
I never got this information before (just a bluetooth connection, but no info about reception and battery status...)
I flashed the complete rom with the radio etc. included.
I don't know if the connection with the car will be more consistent. Too early to tell
Just for the info....

I don't think this has anything to do with a new radio rom, but just for the record there is some improvement.
I have flashed my Hermes with the latest version of LVSW:
20070325_WM6_HERMES_WWE_3.23.0.2_1.38.00.10
and with this version I suddenly have extra info about my phone in my car.
I never got this information before (just a bluetooth connection, but no info about reception and battery status...)
I flashed the complete rom with the radio etc. included.
I don't know if the connection with the car will be more consistent. Too early to tell
Just for the info....

No Wifi/WLAN after upgrade?? -> Possible Solution here!!

Hi Guys
I was using Black 2.0 with SPL 1.40.Olipro (HardSPL_v6) and Radio 1.41.00.10 and this afternoon decided to upgrade to Black 2.5 with SPL 2.10.Olipro
Everything worked well, until i got home, where i noticed no matter how hard i tried wifi/wlan would not detect any networks. Did a few searches but decided to go back to my previous config to see if it still worked or if i did any permanent damage to NAND/EEPROM blocks
First i tried Black 2.0 still with SPL 2.10.Olipro and Radio 1.41.00.10 but to no avail.
Next i downgraded SPL to 1.40.Olipro (HardSPL_V6) still with Black 2.0 and Radio 1.41.00.10 then everything worked!!
Immediately after that Black 2.5 went back on still with 1.40.Olipro and Radio 1.41.00.10, the moment WLAN/Wifi was enabled, a window poped up with a "New network detected" prompt.
Those with WLAN problems please try downgrading your SPL to 1.40.Olipro (HardSPL_v6) as i believe 2.10.Olipro may have some bugs?
Please post feedback for those that have tried.
Cheers!

Have you a link to download Hard-SPL V6 ?
I try with V5 and black 2.0 and no wifi start

Well, I am not sure what is posted below is necessary. I have Black 2.5 and SPL 2.10 Olipro (with Radio 1.41). My WiFi works fine ... and I did no special tweaking (other than to install the cingular settings).
HyperZ said:
Hi Guys
I was using Black 2.0 with SPL 1.40.Olipro (HardSPL_v6) and Radio 1.41.00.10 and this afternoon decided to upgrade to Black 2.5 with SPL 2.10.Olipro
Everything worked well, until i got home, where i noticed no matter how hard i tried wifi/wlan would not detect any networks. Did a few searches but decided to go back to my previous config to see if it still worked or if i did any permanent damage to NAND/EEPROM blocks
First i tried Black 2.0 still with SPL 2.10.Olipro and Radio 1.41.00.10 but to no avail.
Next i downgraded SPL to 1.40.Olipro (HardSPL_V6) still with Black 2.0 and Radio 1.41.00.10 then everything worked!!
Immediately after that Black 2.5 went back on still with 1.40.Olipro and Radio 1.41.00.10, the moment WLAN/Wifi was enabled, a window poped up with a "New network detected" prompt.
Those with WLAN problems please try downgrading your SPL to 1.40.Olipro (HardSPL_v6) as i believe 2.10.Olipro may have some bugs?
Please post feedback for those that have tried.
Cheers!
Click to expand...
Click to collapse

Can connect to router but can't locate webpage
I had flashed the rom to LVSW 23/4/07 version, everything works fine except the wifi. It can connect to the router but it can't load the webpage. It just says locating...
Please help.
ROM: LVSW 4-23 Full, Radio 1.40.30.00, SPL 2.10.Oli, IPL 1.04

I downgraded my spl to the original 1.06 and that didnt fix it

weinson said:
Well, I am not sure what is posted below is necessary. I have Black 2.5 and SPL 2.10 Olipro (with Radio 1.41). My WiFi works fine ... and I did no special tweaking (other than to install the cingular settings).
Click to expand...
Click to collapse
Well after doing a search it looks like there are others that have the same problem as myself. If everything went well for you good on ya! Im sure there are many others out there with successful flashes running Black 2.5 with SPL 2.10. Im just posting what worked for me.

xpbillgates said:
I had flashed the rom to LVSW 23/4/07 version, everything works fine except the wifi. It can connect to the router but it can't load the webpage. It just says locating...
Please help.
ROM: LVSW 4-23 Full, Radio 1.40.30.00, SPL 2.10.Oli, IPL 1.04
Click to expand...
Click to collapse
Are you getting an IP address from the router? Usually its in the format 192.168.x.y
If you have an IP beginning with 169.x.y.z then make sure DHCP server is enabled on your router's config page. Do a search im sure this has been covered here before somewhere in greater detail.

belu said:
Have you a link to download Hard-SPL V6 ?
I try with V5 and black 2.0 and no wifi start
Click to expand...
Click to collapse
Here you go
http://rapidshare.com/files/27700993/Hard-SPL-V6.zip.html

It would be nice is someone made a sticky thread with links to all the threads with this WLAN problem after flashing a rom "hint hint"

I've tried everything, including using SNIFI and SOCKET WIFI softwares to connect to my existing netgear router(WEP enable) after upgrade to WM6 Black 2.5 and Radio 1.40 but unable to detect the network . After several hours, the only solution that work is: Turn on WIFI, DELETE existing connection, and add new connection (with WEP key)- and everything works !!!! . Hope this help

pl55 said:
I've tried everything, including using SNIFI and SOCKET WIFI softwares to connect to my existing netgear router(WEP enable) after upgrade to WM6 Black 2.5 and Radio 1.40 but unable to detect the network . After several hours, the only solution that work is: Turn on WIFI, DELETE existing connection, and add new connection (with WEP key)- and everything works !!!! . Hope this help
Click to expand...
Click to collapse
So you were able to turn on your wifi but couldn't connect?
.... I am unable to turn on my wifi at all.

I am having no trouble at all with WiFi, see signature for setup details.
Had 1.41 radio first, then upgraded Black 2.5, then SPL 2.10, no reasoning for order that I did it in, just did it as the upgrades were available.

anybody knows how to configure wifi in this version?

Lurch3559 said:
I am having no trouble at all with WiFi, see signature for setup details.
Had 1.41 radio first, then upgraded Black 2.5, then SPL 2.10, no reasoning for order that I did it in, just did it as the upgrades were available.
Click to expand...
Click to collapse
Although i dont think order matters, but i did the following which didnt work for me
1. Radio 1.41
2. SPL 2.10
3. Black 2.5
Maybe i should try SPL 2.10 last now that everything is working
Btw did anyone notice a slight decrease in speed/response from Black 2.0 to Black 2.5?

Firstly, thanks.
I have checked it, I can get IP from the router.

I did a Textbook upgraded based on "Mr Vanx" upgrade guide to Black 2.5/1.41.00.10/2.10.Olipro (HardSPL v7)
every thing works perfectly except I can connect to my Netgear wireless router, it detects it and ask for the key, but will not connect.
Not with WPA-WSK or WEP, I have tried everything (removing settings, upgrading router firmware changing from G to B, Hard Reset and not a sausage, it was worked perfectly before the upgrade.
Wififofum2 detects in but failes to recognise the type of security.
I am going to try putting the retail imate back on

I'm on Black 2.5, 1.40 and Wifi turns on, does not detect the network... even with a manual CONNECT through connections
Let it sit a while, with wifi on, 10 minutes maybe, then it decides to pop up Network Detected... truly weird..

Same NO Wifi Issue here too
Running all latest ROMS (see my sig.)
When I turned Wifi, it appears from the device to be working, but it did NOT pick up any signal at all. But...
I DID get Wifi to finally come on, I believe, by turning OFF my Cellular signal in the Connections app, and then turning on Wifi. I think it took a couple of mins to popup, saying my ssid was found at that point.
If anyone finds a real solution, please post!

Hi guys,
I've been reading the forum long time and this is my first post.
My phone is Softbank X01HK and I am currently running Black 2.5 with the buzzing cap, SPL-2.10-Oilpro and Radio 1.38.00.11. My phone works well on Wifi, HSDPA, GPRS-EDGE and GRPS. I have 2 phone numbers with 2 different provider in Hong Kong, Hutchison 3-HK and Peoples.
I used to have SPL-1.40-Oilpro and until yesterday I flashed to SPL-2.10-Oilpro. Surprisingly but weird, I have found my 3G reception at home gets 1 to 2 bar better right after I have SPL-2.10-Oilpro installed. It is so weird cuz I thought the boot loader has nothing to do with the 3G reception, also, everything else still works without any noticeable different.
I was planned to upgrade my Radio Rom to 1.40, but I think I'll stick with 1.38.00.11 for while.
Hope this help

pl55 said:
I've tried everything, including using SNIFI and SOCKET WIFI softwares to connect to my existing netgear router(WEP enable) after upgrade to WM6 Black 2.5 and Radio 1.40 but unable to detect the network . After several hours, the only solution that work is: Turn on WIFI, DELETE existing connection, and add new connection (with WEP key)- and everything works !!!! . Hope this help
Click to expand...
Click to collapse
cheers!!! this one works for me.

Wifi

is it even possible to brick your ****ing wifi!?!?
im going to reload an original HTC rom...flashing a different radio did nothing

ph03nix said:
is it even possible to brick your ****ing wifi!?!?
im going to reload an original HTC rom...flashing a different radio did nothing
Click to expand...
Click to collapse
Hmm no, restart your router, edit, what's your hermes, dopod? jasjam? 8525?

nope, many other devices can connect to wifi fine (even wizard)
mine is HTC hermes, not branded
im currently putting the earliest version original rom back on
the wifi was working fine when i got the phone, now its screwed
it cant be the radio either, because cell was still working perfect
i am very
my wizard survived multiple rom updates/radio updates/blows to the head and never had any problems

ph03nix said:
nope, many other devices can connect to wifi fine (even wizard)
mine is HTC hermes, not branded
im currently putting the earliest version original rom back on
the wifi was working fine when i got the phone, now its screwed
it cant be the radio either, because cell was still working perfect
i am very
my wizard survived multiple rom updates/radio updates/blows to the head and never had any problems
Click to expand...
Click to collapse
You'll be surprised what a restart to the router can do, have you done that yet?

lol yes i have
lol
now my device is completely bricked
still saying spl 2.10.olipro after original rom flash
i believe i can unbrick

ph03nix said:
lol yes i have
lol
now my device is completely bricked
still saying spl 2.10.olipro after original rom flash
i believe i can unbrick
Click to expand...
Click to collapse
Well good luck with that, it will say 2.1 even after original rom. Read mrvanx guide on my signature for downgrading spl.

i will either unbrick with sd card or hammer
its choice

only thing im worried is after unbrick will wifi work
edit: just unbricked radio, rom loads now

WAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
i fixed it!?
i put radio 1.47.30.10 on instead of the 1.5x
umm....i guess i will try a rom that didnt involve ****ing up my wifi and see what happens.....im definately not touching my radio anymore though

hmm now i can officially say WTF
my wifi worked just fine with the original WM5 and the updated radio
now with CRC's rom (i thought PDAViet's was the problem) my wifi no longer works
any ideas? its kinda strange to me two roms dont work with wifi
i should try one from a diffrent WM build

ph03nix said:
hmm now i can officially say WTF
my wifi worked just fine with the original WM5 and the updated radio
now with CRC's rom (i thought PDAViet's was the problem) my wifi no longer works
any ideas? its kinda strange to me two roms dont work with wifi
i should try one from a diffrent WM build
Click to expand...
Click to collapse
I think you are doing something wrong, if wifi works, it works, no matter what ROM, I have used CRC and PDAViet's 19900 build before, and it works fine. Radio only up/down the signal strength to your carrier.

how is that possible?
the original WM 5 i just connected and it worked perfect, i tested IE and everything
just flashed CRC's rom, and now wifi doesnt work at all again
please tell me what possibly could be wrong
it gives me the error 'Cannot connect to the network. Check your network and service provider settings and try again.'
it was just working perfect before

ph03nix said:
how is that possible?
the original WM 5 i just connected and it worked perfect, i tested IE and everything
just flashed CRC's rom, and now wifi doesnt work at all again
please tell me what possibly could be wrong
it gives me the error 'Cannot connect to the network. Check your network and service provider settings and try again.'
it was just working perfect before
Click to expand...
Click to collapse
Have you run HTC connection wizard/checked your wifi settings? Do you have your router set to only accept some mac addressee's? Do you use DHCP or give each device static IP's? Do you have a WAP/WEP get, if so, did you put it in correctly?
Never had any wifi problems with my hermes, now, Blueangel, you where lucky if it would turn on

yep everything, i turned off everything and completely unsecured my network
im going to try an older WM build and see if this fixes the problem
in Wireless LAN it seems the connection establishes ok, then it just cuts me off and said it cant connect to the network
like i said, WM5 just connected on its own perfectly ok

k... im going to try one more thing and thats it

k my wifi will only work with WM5 and will sometimes require a soft reset if power is turned off while its running on WM6
doesnt work at all on 6.1 either
but WM5 it works fine
any suggestions?

k well im gonna figure this out either way
im taking the official wm6 rom (os only) from htc and see if it works
if it doesnt, im gonna pull the wm5 official rom, and if that works, im going to be

ph03nix said:
k my wifi will only work with WM5 and will sometimes require a soft reset if power is turned off while its running on WM6
doesnt work at all on 6.1 either
but WM5 it works fine
any suggestions?
Click to expand...
Click to collapse
Sounds like you might have dodgy radio hardware, everything else connects okey? To the wifi that is, and have you tried another wifi network?

HTC's 3.35.255.1 Pre-Release works ****ing fine
yes, everything else works (as well as on all other roms)
i even tried Schapps WM6 rom, wifi doesnt work
the HTC release i have now is WM6 too and has no wifi problems
i really dont know, but iv had enough of this for one night
ill deal with this tommorow, the official release is working fine

hmmm iv been doing some reading
i read http://groups.google.com/group/micr...ireless/browse_thread/thread/fa20e23f074a391b
it didnt fix my problem, however, when i use a static IP address in settings, it seems to connect and establish a connection fine, it just wont work with it
when i dont enter the settings, it screws up and disconnects
anyways i think this problem is solvable, im just going to have to figure out how
edit: yes i put a non-working wifi rom back on, if it works in offical roms, then it has to work in 6.1 roms somehow....

wifi is not working after changing radio

I've beeing using the 1.00.25.00 radio in my device and everything was working, but I liked the fact that the blackstone radio 1.17.25.09 could possibly handle gps and wifi faster. So I downloaded it from here and installed it:
http://forum.xda-developers.com/showthread.php?t=572555
First I had to security unlock my diamond, it already had hardspl and them, I've installed the radio. Sadly, the radio didn't worked. The device begun to restart automatically just after showing the windows mobile starting logo (just after the Touch Diamond black screen with red versions numbers in the corner). I tried some other versions of that radio, some other radios, but no one worked (the same issue). So I've put back the 1.00.25.00 and it started windows mobile again.
But now the wifi is not working properly. It can find and connect to newtorks without problems, but can't download any internet data. I have tried about 5 different wifi routers in different places. Those used to work before the radio changes. I also tried hard reset, mtty, other radios, other roms, other hardspl, signed, unsigned and the same behavior, wifi connects, but no internet at all (tested with opera and weather).
If I turn wifi off I can download weather normally with edge data connection.
Anyone can help me?
(I not sure it this is the right place to write about it)

Is there any mtty commands for the radio too?
Maybe formating the radio rom and installing it again could help, who knows...

tgusta said:
I've beeing using the 1.00.25.00 radio in my device and everything was working, but I liked the fact that the blackstone radio 1.17.25.09 could possibly handle gps and wifi faster. So I downloaded it from here and installed it:
http://forum.xda-developers.com/showthread.php?t=572555
First I had to security unlock my diamond, it already had hardspl and them, I've installed the radio. Sadly, the radio didn't worked. The device begun to restart automatically just after showing the windows mobile starting logo (just after the Touch Diamond black screen with red versions numbers in the corner). I tried some other versions of that radio, some other radios, but no one worked (the same issue). So I've put back the 1.00.25.00 and it started windows mobile again.
But now the wifi is not working properly. It can find and connect to newtorks without problems, but can't download any internet data. I have tried about 5 different wifi routers in different places. Those used to work before the radio changes. I also tried hard reset, mtty, other radios, other roms, other hardspl, signed, unsigned and the same behavior, wifi connects, but no internet at all (tested with opera and weather).
If I turn wifi off I can download weather normally with edge data connection.
Anyone can help me?
(I not sure it this is the right place to write about it)
Click to expand...
Click to collapse
I have also tried to remove security unlock (just like was before) and put back the same hard spl (version 1.37). The wifi still not working
I really need some help, can't live without wifi (just kidding).

Well, the wifi seems to be partially working, I've tried HTC Debug Tools and used NetworkTestPPC.exe, it's a ping tool. It could pings LAN addresses normally (192.168...), but couldn't ping internet IPs, just like google's 64.233.163.104, always returns timeout (err=11010).
It's seems to be some software problem, but I didn't changed anything after hard reseting in anytime. Just did like I always used to do, installed the rom and tried to use wifi.

I've also tested LAN using total commander and it worked through wifi. But still no internet. I can figure out what could it be.