Related
New radio rom 1.80.00 found in buzzdev.net
http://buzzdev.net/component/option.../id,245/chk,f591b2e6d03ade7ce6681bbbc7563b3a/
have fun
RE
Anybody tried it? Does it solves the bluetooth disconnection problem?
Thanks
Radio 1.08.00
Radio 1.08.00 seems to be for the Himalaya?
yep ! definetely for a himalaya !
I'm halfway through upgrading mine... maybe I should have checked the new posts in here before I started... :? I'll let you know how it turns out!
I had the Country ID error and ran it again. Worked second time.
I guess I can always reflash back to 1.06.00 if it all goes tits up! :lol:
EDIT: Presumably if it's for the Himalaya then WiFi connectivity will be broken once I've done it, since the Himalaya doesn't support WiFi. 30% done. I'll report back soon...
Melty said:
I'm halfway through upgrading mine... maybe I should have checked the new posts in here before I started... :? I'll let you know how it turns out!
I had the Country ID error and ran it again. Worked second time.
I guess I can always reflash back to 1.06.00 if it all goes tits up! :lol:
EDIT: Presumably if it's for the Himalaya then WiFi connectivity will be broken once I've done it, since the Himalaya doesn't support WiFi. 30% done. I'll report back soon...
Click to expand...
Click to collapse
Please let us know, so we could possible proceed as well.
im 88% through flashing, figured wtf 1.06 can go on again
Okay, I've done the upgrade and when I did a soft-reset my machine said
Radio 1.08.00
Protocol 42.41.P8
And I have connected to my wireless network at home and have successfully browsed to the bbc.co.uk homepage, so WiFi works.
I haven't put a SIM in my device yet (still using my old phone).
Why do you guys think it's for the Himalaya?
well it seems to work a treat chaps,
wifi connectec quicker im sure, not long enough for a thorough check but its working!!!
oops i forgot to remove the sd and sim, ahhwell, flashed first time, phew
Okay guys, here's what I've found so far:
WiFi works - connected to my home network and browsed
Bluetooth works - ran TomTom and got a fix
Phone works - Made a few phone calls.
AND... When I rang the Exec it indicated an incoming call the INSTANT I got a dial tone on the house phone and there was no delay before we could hear each other!
This looks like the real deal!
im sure this thing is running alot smoother aswell, so far 1.08 on the Universal is a green light, i dunno where this hymilaya thing has come from, but on buzz's site its in the universal section
Yeah I agree Carnivor. It looks very promising so far and all of the functions appear to work at least as well as before.
Just been syncing successfully with Exchange over WiFi.
Obviously if it starts crashing we'll report back, but nothing bad so far!
About wifi, did you have the need to turn on twice to connect, and is it solved with this radio? Ie: Some universal user can turn on wifi the first time, but if you turn it off (using the pocket pc menu, not by turning off the power), and you turn on again, it won't connect. You would have to turn off then on to connect.
i upgraded to my Jasjar and all went alright until I reset at the end and it want boot past the blue i-mate screen, I have even hard reset and still nothing.
Any help please.....
Or does anyone know how to put old radio or Rom on as it will not boot up so I can't use activesync
Please any help
I have tried doing an upgrade while in the screen where you hard reset it and still nothing, it just sits at the blue boot up screen
Please anyone, Thanks
seal said:
I have tried doing an upgrade while in the screen where you hard reset it and still nothing, it just sits at the blue boot up screen
Please anyone, Thanks
Click to expand...
Click to collapse
Just reset the device normally and plug in the USB cable.
ActiveSync won't connect, but it will be connected to your PC. Just run the T-Mobile ROM Update program then and everything should be fine
If you still want to upgrade to Radio ROM 1.08.00, then try the tutorial I wrote here:
http://forum.xda-developers.com/viewtopic.php?t=40986
Just follow all the steps for the radio ROM, and in the end throw away the non-radio ROM files before flashing
I'm using this method right now on my Dutch T-Mobile MDA Pro as I also had trouble with the NoID tool
Thanks for helping me.
You said use the T-Mobile Rom, I have a i-Mate Jasjar, is the T-Mobile Rom the only Rom that will fix this problem?
seal said:
Thanks for helping me.
You said use the T-Mobile Rom, I have a i-Mate Jasjar, is the T-Mobile Rom the only Rom that will fix this problem?
Click to expand...
Click to collapse
Err, sorry, my bad
I thought you had a T-Mobile logo in your name
No, if you have an I-Mate, use an original I-Mate ROM instead of the T-Mobile one
EDIT:
Actual feedback on this Radio ROM:
the GPRS refused to log in, somehow, although I'm not quite sure this is a problem with the ROM. I'll downgrade to 1.06.00 later and see if the problem persists.
Everything else seems to work just fine
Upgrade Radio 1.08.00
I just upgraded my Universal (OS: TMo 1.20.34) with Radio 1.08.
Everything running like a charm.
Cheers
hrb
Dear All,
I have a PDA2K with ROM Version 1.40.00 WWE and ExtROM 1.40.176 WWE.
When I try to connect to a network using WiFi the PDA2k connects without any porblems to all networks. But when I try to use WiFi to surf the web with IE or use SkyPe the PDA2k always tries to connect using GPRS. Has anyone got any ideas?
Thanks,
Hugh
repleace radio rom for operator of you phone or the rom inside is not set operator corectli
can you explain it more? cause i have the same problem...thx b4
yeah, i have the same problem wifi connects to network fine, with ip, and good signal, but everytime i try to open a web page, i get page cannot be found. ive tried everything, going to back to orignal rom (cingular sx66 rom), changing radio rom to (1.15, 1.13) and also using 1.40 and 1.42 rom also. is my wifi really dead, can anyone help us out??
also, someone mention something about setting operator, if that's the solution, can anyone provide step by step, how on doing that??, i have the cingular sx66 w/o camera
also got same probs...
Please someone give us step by step guide how to encounter this problems...also,im a novice in this forum...so please help me...
same problem
som1 please help!
sirccchar said:
yeah, i have the same problem wifi connects to network fine, with ip, and good signal, but everytime i try to open a web page, i get page cannot be found. ive tried everything, going to back to orignal rom (cingular sx66 rom), changing radio rom to (1.15, 1.13) and also using 1.40 and 1.42 rom also. is my wifi really dead, can anyone help us out??
Click to expand...
Click to collapse
looks like you have the same problem with mine.
At home i've managed to setting a wireless access point using a WIFI router (Linksys WRT54G), the xda's wifi status is connected with the router (as an accesspoint) but everytime tried to opening a webpage, it keep show the error message "the page cannot be found".
is it possible to utilizing the access point scheme above using my O2 Xda IIs?....
does anybody has sucessfull experience with the scheme i've tried to use above?...please share it with us.....
I someone having the same problem as me?
since I installed WM6 on my device (first version 0.2 from Kyphur and now Windows Mobile VI - Black Edition v1.2) I have connection problems with my bluetooth carkit (Toyota Prius).
the pda should make a connection when my car starts, but most of the time the car tells me that the connection failed (not always) and most of the time I need to enable bluetooth in the comm manager on the pda, but have to press the button three time sometime before bluetooth is enabled.
All is well in a conversation, but when it ends and I would like to make a new call via my car, bluetooth is disabled again on the pda.
I didn't have this (many) problems with WM5.
I think I use an old version of the radio rom. Could this be the problem? and does anyone have an idea of what radio rom I should install.
I'm in the Netherlands and use the KPN network.
this is my device information:
ROM version:3.22.200.4
ROM date: 01/04/07
Radio version: 1.16.00.00
Protocol version: 32.53.7018.01H
I never flashed my device before WM6 so I think I have an old bootrom.
Can my problem be solved by installing a newer radio rom?
vulture said:
I someone having the same problem as me?
since I installed WM6 on my device (first version 0.2 from Kyphur and now Windows Mobile VI - Black Edition v1.2) I have connection problems with my bluetooth carkit (Toyota Prius).
the pda should make a connection when my car starts, but most of the time the car tells me that the connection failed (not always) and most of the time I need to enable bluetooth in the comm manager on the pda, but have to press the button three time sometime before bluetooth is enabled.
All is well in a conversation, but when it ends and I would like to make a new call via my car, bluetooth is disabled again on the pda.
I didn't have this (many) problems with WM5.
I think I use an old version of the radio rom. Could this be the problem? and does anyone have an idea of what radio rom I should install.
I'm in the Netherlands and use the KPN network.
this is my device information:
ROM version:3.22.200.4
ROM date: 01/04/07
Radio version: 1.16.00.00
Protocol version: 32.53.7018.01H
I never flashed my device before WM6 so I think I have an old bootrom.
Can my problem be solved by installing a newer radio rom?
Click to expand...
Click to collapse
Similar issue here with WM6 (lvsw 20/3 and black edition 1.2) and Seat Leon Bluetooth Car. If i start the car, pair succesfull, but if i stop PDA (not phone) the car starts loss connection and reconnects several times, and bluetooth goes off. So i need to stay PDA On to work ok (not so difficult, i charge in the car and this prevent to switch off).
I've one more issue with tomtom. When i start tomtom6, the volume in tomtom is deactivateed. If i enter in parameters to activate, the free hands for the car losses the connection, so i need to enter in bloetooth and set the car to Free Hand active. Anyone with similar issues?
I've tested this with one free hands from other manufacturer and works ok, so i think is more a problem with bluetooth for Seat Leon, or the way it works (in my case) thats a problem with TyTN.
vulture said:
Can my problem be solved by installing a newer radio rom?
Click to expand...
Click to collapse
From what I've read (radio flash only affects GSM, not Bluetooth or WiFi), I'd say not likely.
I don't think this has anything to do with a new radio rom, but just for the record there is some improvement.
I have flashed my Hermes with the latest version of LVSW:
20070325_WM6_HERMES_WWE_3.23.0.2_1.38.00.10
and with this version I suddenly have extra info about my phone in my car.
I never got this information before (just a bluetooth connection, but no info about reception and battery status...)
I flashed the complete rom with the radio etc. included.
I don't know if the connection with the car will be more consistent. Too early to tell
Just for the info....
I don't think this has anything to do with a new radio rom, but just for the record there is some improvement.
I have flashed my Hermes with the latest version of LVSW:
20070325_WM6_HERMES_WWE_3.23.0.2_1.38.00.10
and with this version I suddenly have extra info about my phone in my car.
I never got this information before (just a bluetooth connection, but no info about reception and battery status...)
I flashed the complete rom with the radio etc. included.
I don't know if the connection with the car will be more consistent. Too early to tell
Just for the info....
Hi Guys
I was using Black 2.0 with SPL 1.40.Olipro (HardSPL_v6) and Radio 1.41.00.10 and this afternoon decided to upgrade to Black 2.5 with SPL 2.10.Olipro
Everything worked well, until i got home, where i noticed no matter how hard i tried wifi/wlan would not detect any networks. Did a few searches but decided to go back to my previous config to see if it still worked or if i did any permanent damage to NAND/EEPROM blocks
First i tried Black 2.0 still with SPL 2.10.Olipro and Radio 1.41.00.10 but to no avail.
Next i downgraded SPL to 1.40.Olipro (HardSPL_V6) still with Black 2.0 and Radio 1.41.00.10 then everything worked!!
Immediately after that Black 2.5 went back on still with 1.40.Olipro and Radio 1.41.00.10, the moment WLAN/Wifi was enabled, a window poped up with a "New network detected" prompt.
Those with WLAN problems please try downgrading your SPL to 1.40.Olipro (HardSPL_v6) as i believe 2.10.Olipro may have some bugs?
Please post feedback for those that have tried.
Cheers!
Have you a link to download Hard-SPL V6 ?
I try with V5 and black 2.0 and no wifi start
Well, I am not sure what is posted below is necessary. I have Black 2.5 and SPL 2.10 Olipro (with Radio 1.41). My WiFi works fine ... and I did no special tweaking (other than to install the cingular settings).
HyperZ said:
Hi Guys
I was using Black 2.0 with SPL 1.40.Olipro (HardSPL_v6) and Radio 1.41.00.10 and this afternoon decided to upgrade to Black 2.5 with SPL 2.10.Olipro
Everything worked well, until i got home, where i noticed no matter how hard i tried wifi/wlan would not detect any networks. Did a few searches but decided to go back to my previous config to see if it still worked or if i did any permanent damage to NAND/EEPROM blocks
First i tried Black 2.0 still with SPL 2.10.Olipro and Radio 1.41.00.10 but to no avail.
Next i downgraded SPL to 1.40.Olipro (HardSPL_V6) still with Black 2.0 and Radio 1.41.00.10 then everything worked!!
Immediately after that Black 2.5 went back on still with 1.40.Olipro and Radio 1.41.00.10, the moment WLAN/Wifi was enabled, a window poped up with a "New network detected" prompt.
Those with WLAN problems please try downgrading your SPL to 1.40.Olipro (HardSPL_v6) as i believe 2.10.Olipro may have some bugs?
Please post feedback for those that have tried.
Cheers!
Click to expand...
Click to collapse
Can connect to router but can't locate webpage
I had flashed the rom to LVSW 23/4/07 version, everything works fine except the wifi. It can connect to the router but it can't load the webpage. It just says locating...
Please help.
ROM: LVSW 4-23 Full, Radio 1.40.30.00, SPL 2.10.Oli, IPL 1.04
I downgraded my spl to the original 1.06 and that didnt fix it
weinson said:
Well, I am not sure what is posted below is necessary. I have Black 2.5 and SPL 2.10 Olipro (with Radio 1.41). My WiFi works fine ... and I did no special tweaking (other than to install the cingular settings).
Click to expand...
Click to collapse
Well after doing a search it looks like there are others that have the same problem as myself. If everything went well for you good on ya! Im sure there are many others out there with successful flashes running Black 2.5 with SPL 2.10. Im just posting what worked for me.
xpbillgates said:
I had flashed the rom to LVSW 23/4/07 version, everything works fine except the wifi. It can connect to the router but it can't load the webpage. It just says locating...
Please help.
ROM: LVSW 4-23 Full, Radio 1.40.30.00, SPL 2.10.Oli, IPL 1.04
Click to expand...
Click to collapse
Are you getting an IP address from the router? Usually its in the format 192.168.x.y
If you have an IP beginning with 169.x.y.z then make sure DHCP server is enabled on your router's config page. Do a search im sure this has been covered here before somewhere in greater detail.
belu said:
Have you a link to download Hard-SPL V6 ?
I try with V5 and black 2.0 and no wifi start
Click to expand...
Click to collapse
Here you go
http://rapidshare.com/files/27700993/Hard-SPL-V6.zip.html
It would be nice is someone made a sticky thread with links to all the threads with this WLAN problem after flashing a rom "hint hint"
I've tried everything, including using SNIFI and SOCKET WIFI softwares to connect to my existing netgear router(WEP enable) after upgrade to WM6 Black 2.5 and Radio 1.40 but unable to detect the network . After several hours, the only solution that work is: Turn on WIFI, DELETE existing connection, and add new connection (with WEP key)- and everything works !!!! . Hope this help
pl55 said:
I've tried everything, including using SNIFI and SOCKET WIFI softwares to connect to my existing netgear router(WEP enable) after upgrade to WM6 Black 2.5 and Radio 1.40 but unable to detect the network . After several hours, the only solution that work is: Turn on WIFI, DELETE existing connection, and add new connection (with WEP key)- and everything works !!!! . Hope this help
Click to expand...
Click to collapse
So you were able to turn on your wifi but couldn't connect?
.... I am unable to turn on my wifi at all.
I am having no trouble at all with WiFi, see signature for setup details.
Had 1.41 radio first, then upgraded Black 2.5, then SPL 2.10, no reasoning for order that I did it in, just did it as the upgrades were available.
anybody knows how to configure wifi in this version?
Lurch3559 said:
I am having no trouble at all with WiFi, see signature for setup details.
Had 1.41 radio first, then upgraded Black 2.5, then SPL 2.10, no reasoning for order that I did it in, just did it as the upgrades were available.
Click to expand...
Click to collapse
Although i dont think order matters, but i did the following which didnt work for me
1. Radio 1.41
2. SPL 2.10
3. Black 2.5
Maybe i should try SPL 2.10 last now that everything is working
Btw did anyone notice a slight decrease in speed/response from Black 2.0 to Black 2.5?
Firstly, thanks.
I have checked it, I can get IP from the router.
I did a Textbook upgraded based on "Mr Vanx" upgrade guide to Black 2.5/1.41.00.10/2.10.Olipro (HardSPL v7)
every thing works perfectly except I can connect to my Netgear wireless router, it detects it and ask for the key, but will not connect.
Not with WPA-WSK or WEP, I have tried everything (removing settings, upgrading router firmware changing from G to B, Hard Reset and not a sausage, it was worked perfectly before the upgrade.
Wififofum2 detects in but failes to recognise the type of security.
I am going to try putting the retail imate back on
I'm on Black 2.5, 1.40 and Wifi turns on, does not detect the network... even with a manual CONNECT through connections
Let it sit a while, with wifi on, 10 minutes maybe, then it decides to pop up Network Detected... truly weird..
Same NO Wifi Issue here too
Running all latest ROMS (see my sig.)
When I turned Wifi, it appears from the device to be working, but it did NOT pick up any signal at all. But...
I DID get Wifi to finally come on, I believe, by turning OFF my Cellular signal in the Connections app, and then turning on Wifi. I think it took a couple of mins to popup, saying my ssid was found at that point.
If anyone finds a real solution, please post!
Hi guys,
I've been reading the forum long time and this is my first post.
My phone is Softbank X01HK and I am currently running Black 2.5 with the buzzing cap, SPL-2.10-Oilpro and Radio 1.38.00.11. My phone works well on Wifi, HSDPA, GPRS-EDGE and GRPS. I have 2 phone numbers with 2 different provider in Hong Kong, Hutchison 3-HK and Peoples.
I used to have SPL-1.40-Oilpro and until yesterday I flashed to SPL-2.10-Oilpro. Surprisingly but weird, I have found my 3G reception at home gets 1 to 2 bar better right after I have SPL-2.10-Oilpro installed. It is so weird cuz I thought the boot loader has nothing to do with the 3G reception, also, everything else still works without any noticeable different.
I was planned to upgrade my Radio Rom to 1.40, but I think I'll stick with 1.38.00.11 for while.
Hope this help
pl55 said:
I've tried everything, including using SNIFI and SOCKET WIFI softwares to connect to my existing netgear router(WEP enable) after upgrade to WM6 Black 2.5 and Radio 1.40 but unable to detect the network . After several hours, the only solution that work is: Turn on WIFI, DELETE existing connection, and add new connection (with WEP key)- and everything works !!!! . Hope this help
Click to expand...
Click to collapse
cheers!!! this one works for me.
After I upgraded to one of the later WM6 images I also got Radio image 1.15.00
The Radio image seems to be working fine in terms of GSM/GPRS/BT
but failed in one test : connect to a WPA (TKIP) secured networks.
It worked in previous radio version with no problems.
When I switch my router (WRT54G) to WEP security my JasJar connects perfectly. When I switch it to WPA it "sees" the router but fails to establish connection.
I tested several WM6 images, all behave the same in that specific issue.
anyone else has experience it ?
Jwrightmcps + Darkforce Rom + Helmi 1.1 are working with WPA PSK (TKIP). Currently I use darkforce with radio 1.18 and have no problems with wifi connections.
Darkforce rom can be found here:
http://218.93.115.138/D900/wm6/
WPA-PSK TKIP trick to work
save2 said:
I tested several WM6 images, all behave the same in that specific issue.
anyone else has experience it ?
Click to expand...
Click to collapse
Currently I'm using KDSKamal ROM, the only way to have it working is to turn on WiFi and while it scans for a network I turn off the PDA, then I wait 1 second and I turn on the PDA, after this it miraculously connects! I don't know the reason, I discovered this by case and it is repeatable and this is the trick I use every time I want to connect to my AP (this work both with WPA-PSK with TKIP network with SSID broadcasted and with network with SSID not broadcasted). Same story with this ROM with radio 1.15 and 1.18 (the one I'm currently using). With the previous ROM from Jwrightmcps it was working fine without tricks (radio 1.15).
Bye, m.
the trick works ! I turn off my device, turn it on - and walla ! "connected"
I don't believe its the CE ROM image problem. it must be a variant of radio image 1.15 which is damaged.(and probably now every cooked radio ROM now contains this bug too, including 1.18).
Jmp_3f8h said:
Currently I'm using KDSKamal ROM, the only way to have it working is to turn on WiFi and while it scans for a network I turn off the PDA, then I wait 1 second and I turn on the PDA, after this it miraculously connects! I don't know the reason, I discovered this by case and it is repeatable and this is the trick I use every time I want to connect to my AP (this work both with WPA-PSK with TKIP network with SSID broadcasted and with network with SSID not broadcasted). Same story with this ROM with radio 1.15 and 1.18 (the one I'm currently using). With the previous ROM from Jwrightmcps it was working fine without tricks (radio 1.15).
Bye, m.
Click to expand...
Click to collapse
I do the same to connect to bluetooth devices also...
downgraded radio to 1.14.20 . same problems
so now I start to suspect its not the radio version... its the CE ROM image bug.
save2 said:
the trick works ! I turn off my device, turn it on - and walla ! "connected"
I don't believe its the CE ROM image problem. it must be a variant of radio image 1.15 which is damaged.(and probably now every cooked radio ROM now contains this bug too, including 1.18).
Click to expand...
Click to collapse
This is definitely a CE problem, as radio image has nothing to WiFi and BT.
The bug is in tiacxwln.dll driver.