Develop Bugs

"No GSM" on boot screen after reset

Hi,
My Qtek9090 started to act wierd.
When I reset it sometimes it says "no GSM".
I have tried to reload latest radio software without success.
The phone also stops responding now and then for a minute or so
All this happened after I tried to install pocketZip (and run it once)
My guess is that something in the registry or some more deeper vaule (like calibration data for the radio) has changed and made the phone crazy..
Is their anyone out there that can help me to understand what happened?
Br
Lars

still GSM problems
Hi,
I still have problem radio problem.
Now I have reassembled it and found a loose screw :shock:
After that, I "upgraded" to latest rom, 1.40wwe, and then radio to 1.15
After this the PDA does not say "No GSM" any longer, though I only have rebooted it ten times or so.
But when I wake it up from sleep I can see that the radio has been shut off, both via "phoneAlarm" and the GPRS icon "G" which turns into double arrow with a "x"
And the problem with "slow" responce still occurs, but if I do a call, the slow responce dissappears for while.
I have now given up, and ordered a HTC TyTN instead, I hope its not bad choice...
Br
Lars

im having the same problem also

i know this may not work but i have no gsm sometimes on my o2 xda iis and it was solved via a soft reset try it

I have to say tht there are many issues in using the 1.15 radio..
it has borked many phones. so my suggestion to the mods is to remove the 1.15 link from the downloads.
I have also spoiled my phone using the 1.15 rom.
O2 says you need to change the mainboard..
so guys dont use the 1.15 rom

but i didn't install nethin and it happend...i still have the same problem...btw is there a way to instal the original radio rom...that might help my phone...cuz i dun thin i have one in ma phone

im using the 1.15 rom and its all working fine, i guess i must be lucky

i upgraded my xda iis radio rom to 1.50 after a soft reset i have a no gsm on my bootloader can you teach me how you have use or install your radio rom?sorry for bad english, and thanx in advance...

working
im using the 1.15 rom and its all working fine, i guess i must be lucky

No Wifi/WLAN after upgrade?? -> Possible Solution here!!

Hi Guys
I was using Black 2.0 with SPL 1.40.Olipro (HardSPL_v6) and Radio 1.41.00.10 and this afternoon decided to upgrade to Black 2.5 with SPL 2.10.Olipro
Everything worked well, until i got home, where i noticed no matter how hard i tried wifi/wlan would not detect any networks. Did a few searches but decided to go back to my previous config to see if it still worked or if i did any permanent damage to NAND/EEPROM blocks
First i tried Black 2.0 still with SPL 2.10.Olipro and Radio 1.41.00.10 but to no avail.
Next i downgraded SPL to 1.40.Olipro (HardSPL_V6) still with Black 2.0 and Radio 1.41.00.10 then everything worked!!
Immediately after that Black 2.5 went back on still with 1.40.Olipro and Radio 1.41.00.10, the moment WLAN/Wifi was enabled, a window poped up with a "New network detected" prompt.
Those with WLAN problems please try downgrading your SPL to 1.40.Olipro (HardSPL_v6) as i believe 2.10.Olipro may have some bugs?
Please post feedback for those that have tried.
Cheers!

Have you a link to download Hard-SPL V6 ?
I try with V5 and black 2.0 and no wifi start

Well, I am not sure what is posted below is necessary. I have Black 2.5 and SPL 2.10 Olipro (with Radio 1.41). My WiFi works fine ... and I did no special tweaking (other than to install the cingular settings).
HyperZ said:
Hi Guys
I was using Black 2.0 with SPL 1.40.Olipro (HardSPL_v6) and Radio 1.41.00.10 and this afternoon decided to upgrade to Black 2.5 with SPL 2.10.Olipro
Everything worked well, until i got home, where i noticed no matter how hard i tried wifi/wlan would not detect any networks. Did a few searches but decided to go back to my previous config to see if it still worked or if i did any permanent damage to NAND/EEPROM blocks
First i tried Black 2.0 still with SPL 2.10.Olipro and Radio 1.41.00.10 but to no avail.
Next i downgraded SPL to 1.40.Olipro (HardSPL_V6) still with Black 2.0 and Radio 1.41.00.10 then everything worked!!
Immediately after that Black 2.5 went back on still with 1.40.Olipro and Radio 1.41.00.10, the moment WLAN/Wifi was enabled, a window poped up with a "New network detected" prompt.
Those with WLAN problems please try downgrading your SPL to 1.40.Olipro (HardSPL_v6) as i believe 2.10.Olipro may have some bugs?
Please post feedback for those that have tried.
Cheers!
Click to expand...
Click to collapse

Can connect to router but can't locate webpage
I had flashed the rom to LVSW 23/4/07 version, everything works fine except the wifi. It can connect to the router but it can't load the webpage. It just says locating...
Please help.
ROM: LVSW 4-23 Full, Radio 1.40.30.00, SPL 2.10.Oli, IPL 1.04

I downgraded my spl to the original 1.06 and that didnt fix it

weinson said:
Well, I am not sure what is posted below is necessary. I have Black 2.5 and SPL 2.10 Olipro (with Radio 1.41). My WiFi works fine ... and I did no special tweaking (other than to install the cingular settings).
Click to expand...
Click to collapse
Well after doing a search it looks like there are others that have the same problem as myself. If everything went well for you good on ya! Im sure there are many others out there with successful flashes running Black 2.5 with SPL 2.10. Im just posting what worked for me.

xpbillgates said:
I had flashed the rom to LVSW 23/4/07 version, everything works fine except the wifi. It can connect to the router but it can't load the webpage. It just says locating...
Please help.
ROM: LVSW 4-23 Full, Radio 1.40.30.00, SPL 2.10.Oli, IPL 1.04
Click to expand...
Click to collapse
Are you getting an IP address from the router? Usually its in the format 192.168.x.y
If you have an IP beginning with 169.x.y.z then make sure DHCP server is enabled on your router's config page. Do a search im sure this has been covered here before somewhere in greater detail.

belu said:
Have you a link to download Hard-SPL V6 ?
I try with V5 and black 2.0 and no wifi start
Click to expand...
Click to collapse
Here you go
http://rapidshare.com/files/27700993/Hard-SPL-V6.zip.html

It would be nice is someone made a sticky thread with links to all the threads with this WLAN problem after flashing a rom "hint hint"

I've tried everything, including using SNIFI and SOCKET WIFI softwares to connect to my existing netgear router(WEP enable) after upgrade to WM6 Black 2.5 and Radio 1.40 but unable to detect the network . After several hours, the only solution that work is: Turn on WIFI, DELETE existing connection, and add new connection (with WEP key)- and everything works !!!! . Hope this help

pl55 said:
I've tried everything, including using SNIFI and SOCKET WIFI softwares to connect to my existing netgear router(WEP enable) after upgrade to WM6 Black 2.5 and Radio 1.40 but unable to detect the network . After several hours, the only solution that work is: Turn on WIFI, DELETE existing connection, and add new connection (with WEP key)- and everything works !!!! . Hope this help
Click to expand...
Click to collapse
So you were able to turn on your wifi but couldn't connect?
.... I am unable to turn on my wifi at all.

I am having no trouble at all with WiFi, see signature for setup details.
Had 1.41 radio first, then upgraded Black 2.5, then SPL 2.10, no reasoning for order that I did it in, just did it as the upgrades were available.

anybody knows how to configure wifi in this version?

Lurch3559 said:
I am having no trouble at all with WiFi, see signature for setup details.
Had 1.41 radio first, then upgraded Black 2.5, then SPL 2.10, no reasoning for order that I did it in, just did it as the upgrades were available.
Click to expand...
Click to collapse
Although i dont think order matters, but i did the following which didnt work for me
1. Radio 1.41
2. SPL 2.10
3. Black 2.5
Maybe i should try SPL 2.10 last now that everything is working
Btw did anyone notice a slight decrease in speed/response from Black 2.0 to Black 2.5?

Firstly, thanks.
I have checked it, I can get IP from the router.

I did a Textbook upgraded based on "Mr Vanx" upgrade guide to Black 2.5/1.41.00.10/2.10.Olipro (HardSPL v7)
every thing works perfectly except I can connect to my Netgear wireless router, it detects it and ask for the key, but will not connect.
Not with WPA-WSK or WEP, I have tried everything (removing settings, upgrading router firmware changing from G to B, Hard Reset and not a sausage, it was worked perfectly before the upgrade.
Wififofum2 detects in but failes to recognise the type of security.
I am going to try putting the retail imate back on

I'm on Black 2.5, 1.40 and Wifi turns on, does not detect the network... even with a manual CONNECT through connections
Let it sit a while, with wifi on, 10 minutes maybe, then it decides to pop up Network Detected... truly weird..

Same NO Wifi Issue here too
Running all latest ROMS (see my sig.)
When I turned Wifi, it appears from the device to be working, but it did NOT pick up any signal at all. But...
I DID get Wifi to finally come on, I believe, by turning OFF my Cellular signal in the Connections app, and then turning on Wifi. I think it took a couple of mins to popup, saying my ssid was found at that point.
If anyone finds a real solution, please post!

Hi guys,
I've been reading the forum long time and this is my first post.
My phone is Softbank X01HK and I am currently running Black 2.5 with the buzzing cap, SPL-2.10-Oilpro and Radio 1.38.00.11. My phone works well on Wifi, HSDPA, GPRS-EDGE and GRPS. I have 2 phone numbers with 2 different provider in Hong Kong, Hutchison 3-HK and Peoples.
I used to have SPL-1.40-Oilpro and until yesterday I flashed to SPL-2.10-Oilpro. Surprisingly but weird, I have found my 3G reception at home gets 1 to 2 bar better right after I have SPL-2.10-Oilpro installed. It is so weird cuz I thought the boot loader has nothing to do with the 3G reception, also, everything else still works without any noticeable different.
I was planned to upgrade my Radio Rom to 1.40, but I think I'll stick with 1.38.00.11 for while.
Hope this help

pl55 said:
I've tried everything, including using SNIFI and SOCKET WIFI softwares to connect to my existing netgear router(WEP enable) after upgrade to WM6 Black 2.5 and Radio 1.40 but unable to detect the network . After several hours, the only solution that work is: Turn on WIFI, DELETE existing connection, and add new connection (with WEP key)- and everything works !!!! . Hope this help
Click to expand...
Click to collapse
cheers!!! this one works for me.

No GSM error

Hello my first or second posting here but i read alot without posting a message....
My motherlanguage is not english so please be kind if you find any error
My device :
Hermes 100 Xda Trion from O2 Germany
Windows Mobile 6
IPL-1.04
SPL-2.10.olipro
O2 Rom D3.54.207.2
Radio 1.16.00.00
Dont know what this is ... 32.53.7018.01H
Since thursday i have the No GSM error (even if i`m addicted to flash ROMs like hell, i really did nothing like 2 weeks with my device).
What i did before i do my posting this is:
Hard reset 127 times
Soft reset anything like 200-300 times.
Read about 30 threads with that error and most reflect to this guide.
Readed this guide 5 times.
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
Flashed original HTC Tytn ROM/Schaps Rom flashed different radio roms.
It looks ok for 30 minutes but then the device is stuck and after a soft reset it says No GSM again and again ...
It looks like it have connection but if i call my number it have no connection.
Now i give up and ask you guys for help please.
If you need more info about the device or me just ask.
Thank you for reading

Same Problem
Hello again,
i have the same problem, i search for a result but now i upgrade the radio, but now i cant flash the radio again, it start to hang at 11%...

I had a similar problem on my Wizard one time.
I ended up fixing it by flashing on of the giant original shipping roms.
The rom includes everything and was the only way I could recover from the corrupt radio flash.
Hope this helps you.

Try testing your radio with other sim (some other operator's sim
is prefereabile, in your region)
hopes must not die. I will work again
regards
SoL

spritoflife said:
Try testing your radio with other sim (some other operator's sim
is prefereabile, in your region)
hopes must not die. I will work again
regards
SoL
Click to expand...
Click to collapse
these problems are caused be something glitching up in the flash, not the sim

Got the same problem: the radio died without any new flash
If you find a solution, I have some interest too
Kedi said:
Hello my first or second posting here but i read alot without posting a message....
My motherlanguage is not english so please be kind if you find any error
My device :
Hermes 100 Xda Trion from O2 Germany
Windows Mobile 6
IPL-1.04
SPL-2.10.olipro
O2 Rom D3.54.207.2
Radio 1.16.00.00
Dont know what this is ... 32.53.7018.01H
Since thursday i have the No GSM error (even if i`m addicted to flash ROMs like hell, i really did nothing like 2 weeks with my device).
What i did before i do my posting this is:
Hard reset 127 times
Soft reset anything like 200-300 times.
Read about 30 threads with that error and most reflect to this guide.
Readed this guide 5 times.
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
Flashed original HTC Tytn ROM/Schaps Rom flashed different radio roms.
It looks ok for 30 minutes but then the device is stuck and after a soft reset it says No GSM again and again ...
It looks like it have connection but if i call my number it have no connection.
Now i give up and ask you guys for help please.
If you need more info about the device or me just ask.
Thank you for reading
Click to expand...
Click to collapse

The_Null said:
Hello again,
i have the same problem, i search for a result but now i upgrade the radio, but now i cant flash the radio again, it start to hang at 11%...
Click to expand...
Click to collapse
Try to flash again, i had same errors after i flashed some different ROM`s.
What i remember just right now:
I get a new sim card on thursday since then i have this no GSM error.
Now i`m scared to setup my connection because the device is running.
Had some connection losses but as long its working...
Not really.... i open Programms and scroll down then windows hang.
No UMTS connection i bought it because i want to read my emails, not just to make phone calls .
And to be honestly : to flash around
Still looking for a solution for that no GSM error.
Thank you for your attention.

Same Problem
I got an replacement from At&t because of the white screen effect on the Cingular version.
As soon as I load in the sim it gives me a no gsm message..
so i load up black X rc and the newest att radio and i still get the message..
So finally i hard reset a couple of times and it goes away..
Now the only thing is that the connection reset a lot and even flashing back to the original raido with an downgraded ipl and spl still doesn't solve that. I even got a new sim and no luck.
I even went to the point of simunlocking it and it still doesn't work.
Keep in mind that this is the new att 8525 and the cingular 8525 worked better even it i cudn't see the screen..lol

you guys have tried the file off this page, right?
http://www.america.htc.com/support/8525/software-downloads.html

yea i tried the one off htc's website i get an error about 11% thru, any other ideas because im going crazy i have no gsm no phone service no service period!! HELP!!!

Yes, the latest supported wm5 is the one i had originally.
Any ideas from anyone?

hey..... just for understanding....
ur RADIO ROM version is - 1.16.00.00. Hope you know that this has to be separately updated, and is not included in any of the ROMs available in the cooked format e.g schaps....
may i suggest that you upgrade to one of the latest RADIO ROMs, available here - http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
The 1.48 RADIO ROM seems particularly stable all around the world, so go ahead and give it a try - ftp://xda:[email protected]/Uploads/Hermes/HERM_Radio_Only_1.48.00.10_CustomRUU.rar
After that, you could choose Schap's latest ROM and upgrade to the same; and check if things work out.
EDIT: I see that you have flashed different radio roms already......
NOOB's ANSWER TO THIS PREDICAMENT: Downgrade to the offficial radio and ROM. And see to it that you restore your SPL i.e., follow the procedures of removing olipro.... and take it to your nearest O2 dealer...

Maybe this helps ?
How about this one:
Flash your ROM radio etc.
Take out the battery for 20 minutes.
Yesterday i flashed the original O2 ROM after it said No GSM again.
I was mad and took out the battery.
In the morning i inserted the battery again and since then no problem.
To test this if its really working i flashed a HTC ROM, after configuration etc. i took out the battery again, waited ~ 20 minutes.
Because it said no GSM again after flashing HTC ROM.
Looks like its working (for me)
Edit
No its not working
The original O2 ROM was working almost perfect just flashomanianing it back ... Hope it will work .

similar problem plz plz help
hey.. i would really appreciate if you guys could help me out with this one (i am a noob =(( )
One perfect night i loose reception and unable to retain it(no gsm). it seems like i cannot find my network (AT&T) i have the AT&T 8525 phone.
when i go to settings>system>device information, my radio field is blank, i persume thats the problem.. i have tried to install some, but none seem to go through completely.. I have installed vp's WM6 + addons ROM, but it is still blank..
It would be great if you could help me out, i really need the phone for my business.
Some info that might be usefull:
i have HERM100
IPL-1.04 (idk if thats needed)
SPL-2.10.Olipro
vp's WM6 works perfect but no GSM

i know that radio rom needs to be upgrade by itself my prob is that there is no radio it doesnt even read the IMEI, but i know it works because on my old Hermes it still works so its the phone, any ideas? i try to upgrade the radio rom, ive read all the forums on how to fix the radio rom only and nothing again it starts gets to like 11% or 12% then error 262. HELP!!

likewise...

spritoflife said:
Try testing your radio with other sim (some other operator's sim
is prefereabile, in your region)
hopes must not die. I will work again
regards
SoL
Click to expand...
Click to collapse
Flashed WM5 same error = No GSM
Sometimes it shows No R No G
Tested it with 3 different operators sim card.
Setup a complete new OS on my notebook (because i thought a virus maybe and it corrupted the downloaded files).
During the flash process i even dont breathe but no help
Flashed HTC ROM with radio 1.47... interrupted the second update/setup process.
Was ok for 3 hours.
Are we all just beta testers from HTC and MS ?

Im still getting the same issue. Although I unlocked and superCID the deviece I will try to get a warranty exchange on it. It was messing up before I did any of that so I don't think that it should matter. I just want my old Cingular 8525... but i guess i have to keep on trying until I get a good one.

Hi did you ever find a solution to the radio rom flash hanging at 11% i have the same problem I can flash the os but the radio rom always hangs at 11% so nice pda no phone options

Ladies and gentlemen, I had the same problem, and I fixed it. Here's my story.
I was an idiot one night. Pulling my trusty 8525 from my pocket to read a text message, I instead dropped it. On its face. On pavement. From waist height.
I know, I cringed, too.
Ever since then, I got the No GSM error, and radio ROMs refused to flash beyond 11%, except the original factory ship ROM which got as far as 12%. Everything else worked perfectly except the radio.
I took it to one of the IT guys at work who suggested that I may have damaged something on the mainboard, but here's another 8525 you can play with if you want, because it's in the recycle box and will be going out the door to be recycled soon and we won't see any money out of it anyway, so here, it's yours.
Problem was, 8525-b had video issues. SOMETIMES would get the whitescreen. ALWAYS wrapped the bottom ten or fifteen rows of pixels up to the top of the screen. But the phone worked flawlessly.
Then, I discovered that the "video card" is separate from the main circuit board. Therefore, 8525-a had problems with the mainboard, and 8525-b had problems with the videoboard.
The solution presents itself.
Took them both apart, took the mainboard from the 8525-b and installed it into the 8525-a.
My Hermes is back. Everything functions flawlessly, including the radio. And everything flashes, too.
Point of the story: I don't know if you dropped your phone or if maybe something else may have caused some damage, but the only way that I was able to work around the radio rom flash hanging at 11% issue was to replace the mainboard. I got lucky, I was good friends with the IT guy. But I was never able to find another solution.

Radio update only? WIFI problem -help needed!!!

i have some problem with the WIFI, it is turning on and i see the logo but it dont indicate on wireless networks (that are surly there).
if some one have an idea, i thought about flashing the radio only again.
i dont want to flash full rom as i have language SW in my rom.
thanks in advance,
Erez

erez29 said:
i have some problem with the WIFI, it is turning on and i see the logo but it dont indicate on wireless networks (that are surly there).
if some one have an idea, i thought about flashing the radio only again.
i dont want to flash full rom as i have language SW in my rom.
thanks in advance,
Erez
Click to expand...
Click to collapse
My X02HT have same situation suddenly...
(Can Switch WiFi On/Off and Indicate icon but can not found WiFi Netowork)
Did you fix it already? Please tell me how to way to fix if you know.
My Phone' records
1. Bought Original X02HT in Japan
2. Unlocked by www.x02ht-unlock.com
3. Install Softbank Test Rom of WM6 Std
4. Suddenly WiFi No working
5. Upgrade WM6.1 Softbank ROM
6. About
CE OS 5.2.12.38(Build 19208.1.0.1)
Radio Version 1.46.50.10
RIL Version 2.002
Thank you,
arex77

BUMP,
I'm starting to have the same problem, tried 3 different roms including Ookba's 3VO Rom, still not working, i'm back on the original rom, WIFI not working at home, will try at other areas.
Wifi turns on, I get icon, but says "unavailable" no connections show up, doesn't even try searching! GRRRRR - my phone is less than a year old yo!

Yeah my wifi is definitely dead, UNAVAILABLE everywhere!! Piece of crap!

Wifi

is it even possible to brick your ****ing wifi!?!?
im going to reload an original HTC rom...flashing a different radio did nothing

ph03nix said:
is it even possible to brick your ****ing wifi!?!?
im going to reload an original HTC rom...flashing a different radio did nothing
Click to expand...
Click to collapse
Hmm no, restart your router, edit, what's your hermes, dopod? jasjam? 8525?

nope, many other devices can connect to wifi fine (even wizard)
mine is HTC hermes, not branded
im currently putting the earliest version original rom back on
the wifi was working fine when i got the phone, now its screwed
it cant be the radio either, because cell was still working perfect
i am very
my wizard survived multiple rom updates/radio updates/blows to the head and never had any problems

ph03nix said:
nope, many other devices can connect to wifi fine (even wizard)
mine is HTC hermes, not branded
im currently putting the earliest version original rom back on
the wifi was working fine when i got the phone, now its screwed
it cant be the radio either, because cell was still working perfect
i am very
my wizard survived multiple rom updates/radio updates/blows to the head and never had any problems
Click to expand...
Click to collapse
You'll be surprised what a restart to the router can do, have you done that yet?

lol yes i have
lol
now my device is completely bricked
still saying spl 2.10.olipro after original rom flash
i believe i can unbrick

ph03nix said:
lol yes i have
lol
now my device is completely bricked
still saying spl 2.10.olipro after original rom flash
i believe i can unbrick
Click to expand...
Click to collapse
Well good luck with that, it will say 2.1 even after original rom. Read mrvanx guide on my signature for downgrading spl.

i will either unbrick with sd card or hammer
its choice

only thing im worried is after unbrick will wifi work
edit: just unbricked radio, rom loads now

WAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
i fixed it!?
i put radio 1.47.30.10 on instead of the 1.5x
umm....i guess i will try a rom that didnt involve ****ing up my wifi and see what happens.....im definately not touching my radio anymore though

hmm now i can officially say WTF
my wifi worked just fine with the original WM5 and the updated radio
now with CRC's rom (i thought PDAViet's was the problem) my wifi no longer works
any ideas? its kinda strange to me two roms dont work with wifi
i should try one from a diffrent WM build

ph03nix said:
hmm now i can officially say WTF
my wifi worked just fine with the original WM5 and the updated radio
now with CRC's rom (i thought PDAViet's was the problem) my wifi no longer works
any ideas? its kinda strange to me two roms dont work with wifi
i should try one from a diffrent WM build
Click to expand...
Click to collapse
I think you are doing something wrong, if wifi works, it works, no matter what ROM, I have used CRC and PDAViet's 19900 build before, and it works fine. Radio only up/down the signal strength to your carrier.

how is that possible?
the original WM 5 i just connected and it worked perfect, i tested IE and everything
just flashed CRC's rom, and now wifi doesnt work at all again
please tell me what possibly could be wrong
it gives me the error 'Cannot connect to the network. Check your network and service provider settings and try again.'
it was just working perfect before

ph03nix said:
how is that possible?
the original WM 5 i just connected and it worked perfect, i tested IE and everything
just flashed CRC's rom, and now wifi doesnt work at all again
please tell me what possibly could be wrong
it gives me the error 'Cannot connect to the network. Check your network and service provider settings and try again.'
it was just working perfect before
Click to expand...
Click to collapse
Have you run HTC connection wizard/checked your wifi settings? Do you have your router set to only accept some mac addressee's? Do you use DHCP or give each device static IP's? Do you have a WAP/WEP get, if so, did you put it in correctly?
Never had any wifi problems with my hermes, now, Blueangel, you where lucky if it would turn on

yep everything, i turned off everything and completely unsecured my network
im going to try an older WM build and see if this fixes the problem
in Wireless LAN it seems the connection establishes ok, then it just cuts me off and said it cant connect to the network
like i said, WM5 just connected on its own perfectly ok

k... im going to try one more thing and thats it

k my wifi will only work with WM5 and will sometimes require a soft reset if power is turned off while its running on WM6
doesnt work at all on 6.1 either
but WM5 it works fine
any suggestions?

k well im gonna figure this out either way
im taking the official wm6 rom (os only) from htc and see if it works
if it doesnt, im gonna pull the wm5 official rom, and if that works, im going to be

ph03nix said:
k my wifi will only work with WM5 and will sometimes require a soft reset if power is turned off while its running on WM6
doesnt work at all on 6.1 either
but WM5 it works fine
any suggestions?
Click to expand...
Click to collapse
Sounds like you might have dodgy radio hardware, everything else connects okey? To the wifi that is, and have you tried another wifi network?

HTC's 3.35.255.1 Pre-Release works ****ing fine
yes, everything else works (as well as on all other roms)
i even tried Schapps WM6 rom, wifi doesnt work
the HTC release i have now is WM6 too and has no wifi problems
i really dont know, but iv had enough of this for one night
ill deal with this tommorow, the official release is working fine

hmmm iv been doing some reading
i read http://groups.google.com/group/micr...ireless/browse_thread/thread/fa20e23f074a391b
it didnt fix my problem, however, when i use a static IP address in settings, it seems to connect and establish a connection fine, it just wont work with it
when i dont enter the settings, it screws up and disconnects
anyways i think this problem is solvable, im just going to have to figure out how
edit: yes i put a non-working wifi rom back on, if it works in offical roms, then it has to work in 6.1 roms somehow....