is it even possible to brick your ****ing wifi!?!?
im going to reload an original HTC rom...flashing a different radio did nothing
ph03nix said:
is it even possible to brick your ****ing wifi!?!?
im going to reload an original HTC rom...flashing a different radio did nothing
Click to expand...
Click to collapse
Hmm no, restart your router, edit, what's your hermes, dopod? jasjam? 8525?
nope, many other devices can connect to wifi fine (even wizard)
mine is HTC hermes, not branded
im currently putting the earliest version original rom back on
the wifi was working fine when i got the phone, now its screwed
it cant be the radio either, because cell was still working perfect
i am very
my wizard survived multiple rom updates/radio updates/blows to the head and never had any problems
ph03nix said:
nope, many other devices can connect to wifi fine (even wizard)
mine is HTC hermes, not branded
im currently putting the earliest version original rom back on
the wifi was working fine when i got the phone, now its screwed
it cant be the radio either, because cell was still working perfect
i am very
my wizard survived multiple rom updates/radio updates/blows to the head and never had any problems
Click to expand...
Click to collapse
You'll be surprised what a restart to the router can do, have you done that yet?
lol yes i have
lol
now my device is completely bricked
still saying spl 2.10.olipro after original rom flash
i believe i can unbrick
ph03nix said:
lol yes i have
lol
now my device is completely bricked
still saying spl 2.10.olipro after original rom flash
i believe i can unbrick
Click to expand...
Click to collapse
Well good luck with that, it will say 2.1 even after original rom. Read mrvanx guide on my signature for downgrading spl.
i will either unbrick with sd card or hammer
its choice
only thing im worried is after unbrick will wifi work
edit: just unbricked radio, rom loads now
WAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
i fixed it!?
i put radio 1.47.30.10 on instead of the 1.5x
umm....i guess i will try a rom that didnt involve ****ing up my wifi and see what happens.....im definately not touching my radio anymore though
hmm now i can officially say WTF
my wifi worked just fine with the original WM5 and the updated radio
now with CRC's rom (i thought PDAViet's was the problem) my wifi no longer works
any ideas? its kinda strange to me two roms dont work with wifi
i should try one from a diffrent WM build
ph03nix said:
hmm now i can officially say WTF
my wifi worked just fine with the original WM5 and the updated radio
now with CRC's rom (i thought PDAViet's was the problem) my wifi no longer works
any ideas? its kinda strange to me two roms dont work with wifi
i should try one from a diffrent WM build
Click to expand...
Click to collapse
I think you are doing something wrong, if wifi works, it works, no matter what ROM, I have used CRC and PDAViet's 19900 build before, and it works fine. Radio only up/down the signal strength to your carrier.
how is that possible?
the original WM 5 i just connected and it worked perfect, i tested IE and everything
just flashed CRC's rom, and now wifi doesnt work at all again
please tell me what possibly could be wrong
it gives me the error 'Cannot connect to the network. Check your network and service provider settings and try again.'
it was just working perfect before
ph03nix said:
how is that possible?
the original WM 5 i just connected and it worked perfect, i tested IE and everything
just flashed CRC's rom, and now wifi doesnt work at all again
please tell me what possibly could be wrong
it gives me the error 'Cannot connect to the network. Check your network and service provider settings and try again.'
it was just working perfect before
Click to expand...
Click to collapse
Have you run HTC connection wizard/checked your wifi settings? Do you have your router set to only accept some mac addressee's? Do you use DHCP or give each device static IP's? Do you have a WAP/WEP get, if so, did you put it in correctly?
Never had any wifi problems with my hermes, now, Blueangel, you where lucky if it would turn on
yep everything, i turned off everything and completely unsecured my network
im going to try an older WM build and see if this fixes the problem
in Wireless LAN it seems the connection establishes ok, then it just cuts me off and said it cant connect to the network
like i said, WM5 just connected on its own perfectly ok
k... im going to try one more thing and thats it
k my wifi will only work with WM5 and will sometimes require a soft reset if power is turned off while its running on WM6
doesnt work at all on 6.1 either
but WM5 it works fine
any suggestions?
k well im gonna figure this out either way
im taking the official wm6 rom (os only) from htc and see if it works
if it doesnt, im gonna pull the wm5 official rom, and if that works, im going to be
ph03nix said:
k my wifi will only work with WM5 and will sometimes require a soft reset if power is turned off while its running on WM6
doesnt work at all on 6.1 either
but WM5 it works fine
any suggestions?
Click to expand...
Click to collapse
Sounds like you might have dodgy radio hardware, everything else connects okey? To the wifi that is, and have you tried another wifi network?
HTC's 3.35.255.1 Pre-Release works ****ing fine
yes, everything else works (as well as on all other roms)
i even tried Schapps WM6 rom, wifi doesnt work
the HTC release i have now is WM6 too and has no wifi problems
i really dont know, but iv had enough of this for one night
ill deal with this tommorow, the official release is working fine
hmmm iv been doing some reading
i read http://groups.google.com/group/micr...ireless/browse_thread/thread/fa20e23f074a391b
it didnt fix my problem, however, when i use a static IP address in settings, it seems to connect and establish a connection fine, it just wont work with it
when i dont enter the settings, it screws up and disconnects
anyways i think this problem is solvable, im just going to have to figure out how
edit: yes i put a non-working wifi rom back on, if it works in offical roms, then it has to work in 6.1 roms somehow....
Related
New radio rom 1.80.00 found in buzzdev.net
http://buzzdev.net/component/option.../id,245/chk,f591b2e6d03ade7ce6681bbbc7563b3a/
have fun
RE
Anybody tried it? Does it solves the bluetooth disconnection problem?
Thanks
Radio 1.08.00
Radio 1.08.00 seems to be for the Himalaya?
yep ! definetely for a himalaya !
I'm halfway through upgrading mine... maybe I should have checked the new posts in here before I started... :? I'll let you know how it turns out!
I had the Country ID error and ran it again. Worked second time.
I guess I can always reflash back to 1.06.00 if it all goes tits up! :lol:
EDIT: Presumably if it's for the Himalaya then WiFi connectivity will be broken once I've done it, since the Himalaya doesn't support WiFi. 30% done. I'll report back soon...
Melty said:
I'm halfway through upgrading mine... maybe I should have checked the new posts in here before I started... :? I'll let you know how it turns out!
I had the Country ID error and ran it again. Worked second time.
I guess I can always reflash back to 1.06.00 if it all goes tits up! :lol:
EDIT: Presumably if it's for the Himalaya then WiFi connectivity will be broken once I've done it, since the Himalaya doesn't support WiFi. 30% done. I'll report back soon...
Click to expand...
Click to collapse
Please let us know, so we could possible proceed as well.
im 88% through flashing, figured wtf 1.06 can go on again
Okay, I've done the upgrade and when I did a soft-reset my machine said
Radio 1.08.00
Protocol 42.41.P8
And I have connected to my wireless network at home and have successfully browsed to the bbc.co.uk homepage, so WiFi works.
I haven't put a SIM in my device yet (still using my old phone).
Why do you guys think it's for the Himalaya?
well it seems to work a treat chaps,
wifi connectec quicker im sure, not long enough for a thorough check but its working!!!
oops i forgot to remove the sd and sim, ahhwell, flashed first time, phew
Okay guys, here's what I've found so far:
WiFi works - connected to my home network and browsed
Bluetooth works - ran TomTom and got a fix
Phone works - Made a few phone calls.
AND... When I rang the Exec it indicated an incoming call the INSTANT I got a dial tone on the house phone and there was no delay before we could hear each other!
This looks like the real deal!
im sure this thing is running alot smoother aswell, so far 1.08 on the Universal is a green light, i dunno where this hymilaya thing has come from, but on buzz's site its in the universal section
Yeah I agree Carnivor. It looks very promising so far and all of the functions appear to work at least as well as before.
Just been syncing successfully with Exchange over WiFi.
Obviously if it starts crashing we'll report back, but nothing bad so far!
About wifi, did you have the need to turn on twice to connect, and is it solved with this radio? Ie: Some universal user can turn on wifi the first time, but if you turn it off (using the pocket pc menu, not by turning off the power), and you turn on again, it won't connect. You would have to turn off then on to connect.
i upgraded to my Jasjar and all went alright until I reset at the end and it want boot past the blue i-mate screen, I have even hard reset and still nothing.
Any help please.....
Or does anyone know how to put old radio or Rom on as it will not boot up so I can't use activesync
Please any help
I have tried doing an upgrade while in the screen where you hard reset it and still nothing, it just sits at the blue boot up screen
Please anyone, Thanks
seal said:
I have tried doing an upgrade while in the screen where you hard reset it and still nothing, it just sits at the blue boot up screen
Please anyone, Thanks
Click to expand...
Click to collapse
Just reset the device normally and plug in the USB cable.
ActiveSync won't connect, but it will be connected to your PC. Just run the T-Mobile ROM Update program then and everything should be fine
If you still want to upgrade to Radio ROM 1.08.00, then try the tutorial I wrote here:
http://forum.xda-developers.com/viewtopic.php?t=40986
Just follow all the steps for the radio ROM, and in the end throw away the non-radio ROM files before flashing
I'm using this method right now on my Dutch T-Mobile MDA Pro as I also had trouble with the NoID tool
Thanks for helping me.
You said use the T-Mobile Rom, I have a i-Mate Jasjar, is the T-Mobile Rom the only Rom that will fix this problem?
seal said:
Thanks for helping me.
You said use the T-Mobile Rom, I have a i-Mate Jasjar, is the T-Mobile Rom the only Rom that will fix this problem?
Click to expand...
Click to collapse
Err, sorry, my bad
I thought you had a T-Mobile logo in your name
No, if you have an I-Mate, use an original I-Mate ROM instead of the T-Mobile one
EDIT:
Actual feedback on this Radio ROM:
the GPRS refused to log in, somehow, although I'm not quite sure this is a problem with the ROM. I'll downgrade to 1.06.00 later and see if the problem persists.
Everything else seems to work just fine
Upgrade Radio 1.08.00
I just upgraded my Universal (OS: TMo 1.20.34) with Radio 1.08.
Everything running like a charm.
Cheers
hrb
Hi Guys
I was using Black 2.0 with SPL 1.40.Olipro (HardSPL_v6) and Radio 1.41.00.10 and this afternoon decided to upgrade to Black 2.5 with SPL 2.10.Olipro
Everything worked well, until i got home, where i noticed no matter how hard i tried wifi/wlan would not detect any networks. Did a few searches but decided to go back to my previous config to see if it still worked or if i did any permanent damage to NAND/EEPROM blocks
First i tried Black 2.0 still with SPL 2.10.Olipro and Radio 1.41.00.10 but to no avail.
Next i downgraded SPL to 1.40.Olipro (HardSPL_V6) still with Black 2.0 and Radio 1.41.00.10 then everything worked!!
Immediately after that Black 2.5 went back on still with 1.40.Olipro and Radio 1.41.00.10, the moment WLAN/Wifi was enabled, a window poped up with a "New network detected" prompt.
Those with WLAN problems please try downgrading your SPL to 1.40.Olipro (HardSPL_v6) as i believe 2.10.Olipro may have some bugs?
Please post feedback for those that have tried.
Cheers!
Have you a link to download Hard-SPL V6 ?
I try with V5 and black 2.0 and no wifi start
Well, I am not sure what is posted below is necessary. I have Black 2.5 and SPL 2.10 Olipro (with Radio 1.41). My WiFi works fine ... and I did no special tweaking (other than to install the cingular settings).
HyperZ said:
Hi Guys
I was using Black 2.0 with SPL 1.40.Olipro (HardSPL_v6) and Radio 1.41.00.10 and this afternoon decided to upgrade to Black 2.5 with SPL 2.10.Olipro
Everything worked well, until i got home, where i noticed no matter how hard i tried wifi/wlan would not detect any networks. Did a few searches but decided to go back to my previous config to see if it still worked or if i did any permanent damage to NAND/EEPROM blocks
First i tried Black 2.0 still with SPL 2.10.Olipro and Radio 1.41.00.10 but to no avail.
Next i downgraded SPL to 1.40.Olipro (HardSPL_V6) still with Black 2.0 and Radio 1.41.00.10 then everything worked!!
Immediately after that Black 2.5 went back on still with 1.40.Olipro and Radio 1.41.00.10, the moment WLAN/Wifi was enabled, a window poped up with a "New network detected" prompt.
Those with WLAN problems please try downgrading your SPL to 1.40.Olipro (HardSPL_v6) as i believe 2.10.Olipro may have some bugs?
Please post feedback for those that have tried.
Cheers!
Click to expand...
Click to collapse
Can connect to router but can't locate webpage
I had flashed the rom to LVSW 23/4/07 version, everything works fine except the wifi. It can connect to the router but it can't load the webpage. It just says locating...
Please help.
ROM: LVSW 4-23 Full, Radio 1.40.30.00, SPL 2.10.Oli, IPL 1.04
I downgraded my spl to the original 1.06 and that didnt fix it
weinson said:
Well, I am not sure what is posted below is necessary. I have Black 2.5 and SPL 2.10 Olipro (with Radio 1.41). My WiFi works fine ... and I did no special tweaking (other than to install the cingular settings).
Click to expand...
Click to collapse
Well after doing a search it looks like there are others that have the same problem as myself. If everything went well for you good on ya! Im sure there are many others out there with successful flashes running Black 2.5 with SPL 2.10. Im just posting what worked for me.
xpbillgates said:
I had flashed the rom to LVSW 23/4/07 version, everything works fine except the wifi. It can connect to the router but it can't load the webpage. It just says locating...
Please help.
ROM: LVSW 4-23 Full, Radio 1.40.30.00, SPL 2.10.Oli, IPL 1.04
Click to expand...
Click to collapse
Are you getting an IP address from the router? Usually its in the format 192.168.x.y
If you have an IP beginning with 169.x.y.z then make sure DHCP server is enabled on your router's config page. Do a search im sure this has been covered here before somewhere in greater detail.
belu said:
Have you a link to download Hard-SPL V6 ?
I try with V5 and black 2.0 and no wifi start
Click to expand...
Click to collapse
Here you go
http://rapidshare.com/files/27700993/Hard-SPL-V6.zip.html
It would be nice is someone made a sticky thread with links to all the threads with this WLAN problem after flashing a rom "hint hint"
I've tried everything, including using SNIFI and SOCKET WIFI softwares to connect to my existing netgear router(WEP enable) after upgrade to WM6 Black 2.5 and Radio 1.40 but unable to detect the network . After several hours, the only solution that work is: Turn on WIFI, DELETE existing connection, and add new connection (with WEP key)- and everything works !!!! . Hope this help
pl55 said:
I've tried everything, including using SNIFI and SOCKET WIFI softwares to connect to my existing netgear router(WEP enable) after upgrade to WM6 Black 2.5 and Radio 1.40 but unable to detect the network . After several hours, the only solution that work is: Turn on WIFI, DELETE existing connection, and add new connection (with WEP key)- and everything works !!!! . Hope this help
Click to expand...
Click to collapse
So you were able to turn on your wifi but couldn't connect?
.... I am unable to turn on my wifi at all.
I am having no trouble at all with WiFi, see signature for setup details.
Had 1.41 radio first, then upgraded Black 2.5, then SPL 2.10, no reasoning for order that I did it in, just did it as the upgrades were available.
anybody knows how to configure wifi in this version?
Lurch3559 said:
I am having no trouble at all with WiFi, see signature for setup details.
Had 1.41 radio first, then upgraded Black 2.5, then SPL 2.10, no reasoning for order that I did it in, just did it as the upgrades were available.
Click to expand...
Click to collapse
Although i dont think order matters, but i did the following which didnt work for me
1. Radio 1.41
2. SPL 2.10
3. Black 2.5
Maybe i should try SPL 2.10 last now that everything is working
Btw did anyone notice a slight decrease in speed/response from Black 2.0 to Black 2.5?
Firstly, thanks.
I have checked it, I can get IP from the router.
I did a Textbook upgraded based on "Mr Vanx" upgrade guide to Black 2.5/1.41.00.10/2.10.Olipro (HardSPL v7)
every thing works perfectly except I can connect to my Netgear wireless router, it detects it and ask for the key, but will not connect.
Not with WPA-WSK or WEP, I have tried everything (removing settings, upgrading router firmware changing from G to B, Hard Reset and not a sausage, it was worked perfectly before the upgrade.
Wififofum2 detects in but failes to recognise the type of security.
I am going to try putting the retail imate back on
I'm on Black 2.5, 1.40 and Wifi turns on, does not detect the network... even with a manual CONNECT through connections
Let it sit a while, with wifi on, 10 minutes maybe, then it decides to pop up Network Detected... truly weird..
Same NO Wifi Issue here too
Running all latest ROMS (see my sig.)
When I turned Wifi, it appears from the device to be working, but it did NOT pick up any signal at all. But...
I DID get Wifi to finally come on, I believe, by turning OFF my Cellular signal in the Connections app, and then turning on Wifi. I think it took a couple of mins to popup, saying my ssid was found at that point.
If anyone finds a real solution, please post!
Hi guys,
I've been reading the forum long time and this is my first post.
My phone is Softbank X01HK and I am currently running Black 2.5 with the buzzing cap, SPL-2.10-Oilpro and Radio 1.38.00.11. My phone works well on Wifi, HSDPA, GPRS-EDGE and GRPS. I have 2 phone numbers with 2 different provider in Hong Kong, Hutchison 3-HK and Peoples.
I used to have SPL-1.40-Oilpro and until yesterday I flashed to SPL-2.10-Oilpro. Surprisingly but weird, I have found my 3G reception at home gets 1 to 2 bar better right after I have SPL-2.10-Oilpro installed. It is so weird cuz I thought the boot loader has nothing to do with the 3G reception, also, everything else still works without any noticeable different.
I was planned to upgrade my Radio Rom to 1.40, but I think I'll stick with 1.38.00.11 for while.
Hope this help
pl55 said:
I've tried everything, including using SNIFI and SOCKET WIFI softwares to connect to my existing netgear router(WEP enable) after upgrade to WM6 Black 2.5 and Radio 1.40 but unable to detect the network . After several hours, the only solution that work is: Turn on WIFI, DELETE existing connection, and add new connection (with WEP key)- and everything works !!!! . Hope this help
Click to expand...
Click to collapse
cheers!!! this one works for me.
Ive got a very strange Problem with Direct Push. After flashing HardSPLv7 my direct push doesnt work :S
I know this sounds crazy but ive had a replacement from T-Mobile and tried it before flashing SPL and it worked fine, after and it doesnt work!
Firstly does anyone have any ideas? And secondly if not, is there a way to remove SPL or not?
Thanks
Jas
jaso2005 said:
Ive got a very strange Problem with Direct Push. After flashing HardSPLv7 my direct push doesnt work :S
I know this sounds crazy but ive had a replacement from T-Mobile and tried it before flashing SPL and it worked fine, after and it doesnt work!
Firstly does anyone have any ideas? And secondly if not, is there a way to remove SPL or not?
Thanks
Jas
Click to expand...
Click to collapse
I've been having issues with Direct Push and IMAP after upgrading to Black 2.5, Hardsplv7 and the latest radio.
It sometimes works and other times doesn't.
I can't figure out why.
really weird aint it. and i use DP all time so i need to fix it some how.
Same setup here and have no problems at all. Your sure its not the exchange server or something? Have you tried to connect with something else besides the phone?
yer, ive tried the exact same phone but as it came from T-Mobile and all works fine :S
I know its not the exchange server and its all working fine on other devices
I wonder if it is one of the third party programs messing this up or something in the settings.
i dunno mate, ive even tried downgrading to black 2.0 and it still wont work
jaso2005 said:
Ive got a very strange Problem with Direct Push. After flashing HardSPLv7 my direct push doesnt work :S
I know this sounds crazy but ive had a replacement from T-Mobile and tried it before flashing SPL and it worked fine, after and it doesnt work!
Firstly does anyone have any ideas? And secondly if not, is there a way to remove SPL or not?
Thanks
Jas
Click to expand...
Click to collapse
Try re-flashing and then make sure to not enter your exchange info until after you set up your connection settings. First time I flashed to Black 2.0 I had to HR because I tried entering exchange info first.
I'm using: Black 2.5, Hard SPL v7 and Radion 1.40...all with no problems on my push; it hits my phone before my desktop computer.
Jim
i have some problem with the WIFI, it is turning on and i see the logo but it dont indicate on wireless networks (that are surly there).
if some one have an idea, i thought about flashing the radio only again.
i dont want to flash full rom as i have language SW in my rom.
thanks in advance,
Erez
erez29 said:
i have some problem with the WIFI, it is turning on and i see the logo but it dont indicate on wireless networks (that are surly there).
if some one have an idea, i thought about flashing the radio only again.
i dont want to flash full rom as i have language SW in my rom.
thanks in advance,
Erez
Click to expand...
Click to collapse
My X02HT have same situation suddenly...
(Can Switch WiFi On/Off and Indicate icon but can not found WiFi Netowork)
Did you fix it already? Please tell me how to way to fix if you know.
My Phone' records
1. Bought Original X02HT in Japan
2. Unlocked by www.x02ht-unlock.com
3. Install Softbank Test Rom of WM6 Std
4. Suddenly WiFi No working
5. Upgrade WM6.1 Softbank ROM
6. About
CE OS 5.2.12.38(Build 19208.1.0.1)
Radio Version 1.46.50.10
RIL Version 2.002
Thank you,
arex77
BUMP,
I'm starting to have the same problem, tried 3 different roms including Ookba's 3VO Rom, still not working, i'm back on the original rom, WIFI not working at home, will try at other areas.
Wifi turns on, I get icon, but says "unavailable" no connections show up, doesn't even try searching! GRRRRR - my phone is less than a year old yo!
Yeah my wifi is definitely dead, UNAVAILABLE everywhere!! Piece of crap!
I was really annoyed at how the bloatware seems to be baked in now, and the old hard reset/soft reset trick doesn't work anymore to skip the carrier's cruft.
I decided to take the plunge and try out the recent official 6.5 WWE ROM on my new Tilt2. HardSPL'ed no problems, dumped the stock ROM, and flashed the WWE ROM. Just followed the instructions in the other threads and had no issues (Running Win7 x64 RTM on the PC)
Recovered over 100MB of rom space - after the WWE ROM it went down to 59MB used and 200MB free. Put my ATT SIM after the flashing back in, the device autoconfigured everything and connected to HSPDA right away. Only other thing I had to do was install the keyboard cab that I found here to correct the layout (sure the OK key doesnt work, but I can live with that)
One oddity is that the Youtube client works great on WiFi, but not over ATT's 3G. Maybe I need to try a different APN? (It auto configured MediaNet)
areilly said:
...
One oddity is that the Youtube client works great on WiFi, but not over ATT's 3G. Maybe I need to try a different APN? (It auto configured MediaNet)
Click to expand...
Click to collapse
This fixed it for me.
http://forum.xda-developers.com/show...0&postcount=40