Develop Bugs

No Wifi/WLAN after upgrade?? -> Possible Solution here!!

Hi Guys
I was using Black 2.0 with SPL 1.40.Olipro (HardSPL_v6) and Radio 1.41.00.10 and this afternoon decided to upgrade to Black 2.5 with SPL 2.10.Olipro
Everything worked well, until i got home, where i noticed no matter how hard i tried wifi/wlan would not detect any networks. Did a few searches but decided to go back to my previous config to see if it still worked or if i did any permanent damage to NAND/EEPROM blocks
First i tried Black 2.0 still with SPL 2.10.Olipro and Radio 1.41.00.10 but to no avail.
Next i downgraded SPL to 1.40.Olipro (HardSPL_V6) still with Black 2.0 and Radio 1.41.00.10 then everything worked!!
Immediately after that Black 2.5 went back on still with 1.40.Olipro and Radio 1.41.00.10, the moment WLAN/Wifi was enabled, a window poped up with a "New network detected" prompt.
Those with WLAN problems please try downgrading your SPL to 1.40.Olipro (HardSPL_v6) as i believe 2.10.Olipro may have some bugs?
Please post feedback for those that have tried.
Cheers!

Have you a link to download Hard-SPL V6 ?
I try with V5 and black 2.0 and no wifi start

Well, I am not sure what is posted below is necessary. I have Black 2.5 and SPL 2.10 Olipro (with Radio 1.41). My WiFi works fine ... and I did no special tweaking (other than to install the cingular settings).
HyperZ said:
Hi Guys
I was using Black 2.0 with SPL 1.40.Olipro (HardSPL_v6) and Radio 1.41.00.10 and this afternoon decided to upgrade to Black 2.5 with SPL 2.10.Olipro
Everything worked well, until i got home, where i noticed no matter how hard i tried wifi/wlan would not detect any networks. Did a few searches but decided to go back to my previous config to see if it still worked or if i did any permanent damage to NAND/EEPROM blocks
First i tried Black 2.0 still with SPL 2.10.Olipro and Radio 1.41.00.10 but to no avail.
Next i downgraded SPL to 1.40.Olipro (HardSPL_V6) still with Black 2.0 and Radio 1.41.00.10 then everything worked!!
Immediately after that Black 2.5 went back on still with 1.40.Olipro and Radio 1.41.00.10, the moment WLAN/Wifi was enabled, a window poped up with a "New network detected" prompt.
Those with WLAN problems please try downgrading your SPL to 1.40.Olipro (HardSPL_v6) as i believe 2.10.Olipro may have some bugs?
Please post feedback for those that have tried.
Cheers!
Click to expand...
Click to collapse

Can connect to router but can't locate webpage
I had flashed the rom to LVSW 23/4/07 version, everything works fine except the wifi. It can connect to the router but it can't load the webpage. It just says locating...
Please help.
ROM: LVSW 4-23 Full, Radio 1.40.30.00, SPL 2.10.Oli, IPL 1.04

I downgraded my spl to the original 1.06 and that didnt fix it

weinson said:
Well, I am not sure what is posted below is necessary. I have Black 2.5 and SPL 2.10 Olipro (with Radio 1.41). My WiFi works fine ... and I did no special tweaking (other than to install the cingular settings).
Click to expand...
Click to collapse
Well after doing a search it looks like there are others that have the same problem as myself. If everything went well for you good on ya! Im sure there are many others out there with successful flashes running Black 2.5 with SPL 2.10. Im just posting what worked for me.

xpbillgates said:
I had flashed the rom to LVSW 23/4/07 version, everything works fine except the wifi. It can connect to the router but it can't load the webpage. It just says locating...
Please help.
ROM: LVSW 4-23 Full, Radio 1.40.30.00, SPL 2.10.Oli, IPL 1.04
Click to expand...
Click to collapse
Are you getting an IP address from the router? Usually its in the format 192.168.x.y
If you have an IP beginning with 169.x.y.z then make sure DHCP server is enabled on your router's config page. Do a search im sure this has been covered here before somewhere in greater detail.

belu said:
Have you a link to download Hard-SPL V6 ?
I try with V5 and black 2.0 and no wifi start
Click to expand...
Click to collapse
Here you go
http://rapidshare.com/files/27700993/Hard-SPL-V6.zip.html

It would be nice is someone made a sticky thread with links to all the threads with this WLAN problem after flashing a rom "hint hint"

I've tried everything, including using SNIFI and SOCKET WIFI softwares to connect to my existing netgear router(WEP enable) after upgrade to WM6 Black 2.5 and Radio 1.40 but unable to detect the network . After several hours, the only solution that work is: Turn on WIFI, DELETE existing connection, and add new connection (with WEP key)- and everything works !!!! . Hope this help

pl55 said:
I've tried everything, including using SNIFI and SOCKET WIFI softwares to connect to my existing netgear router(WEP enable) after upgrade to WM6 Black 2.5 and Radio 1.40 but unable to detect the network . After several hours, the only solution that work is: Turn on WIFI, DELETE existing connection, and add new connection (with WEP key)- and everything works !!!! . Hope this help
Click to expand...
Click to collapse
So you were able to turn on your wifi but couldn't connect?
.... I am unable to turn on my wifi at all.

I am having no trouble at all with WiFi, see signature for setup details.
Had 1.41 radio first, then upgraded Black 2.5, then SPL 2.10, no reasoning for order that I did it in, just did it as the upgrades were available.

anybody knows how to configure wifi in this version?

Lurch3559 said:
I am having no trouble at all with WiFi, see signature for setup details.
Had 1.41 radio first, then upgraded Black 2.5, then SPL 2.10, no reasoning for order that I did it in, just did it as the upgrades were available.
Click to expand...
Click to collapse
Although i dont think order matters, but i did the following which didnt work for me
1. Radio 1.41
2. SPL 2.10
3. Black 2.5
Maybe i should try SPL 2.10 last now that everything is working
Btw did anyone notice a slight decrease in speed/response from Black 2.0 to Black 2.5?

Firstly, thanks.
I have checked it, I can get IP from the router.

I did a Textbook upgraded based on "Mr Vanx" upgrade guide to Black 2.5/1.41.00.10/2.10.Olipro (HardSPL v7)
every thing works perfectly except I can connect to my Netgear wireless router, it detects it and ask for the key, but will not connect.
Not with WPA-WSK or WEP, I have tried everything (removing settings, upgrading router firmware changing from G to B, Hard Reset and not a sausage, it was worked perfectly before the upgrade.
Wififofum2 detects in but failes to recognise the type of security.
I am going to try putting the retail imate back on

I'm on Black 2.5, 1.40 and Wifi turns on, does not detect the network... even with a manual CONNECT through connections
Let it sit a while, with wifi on, 10 minutes maybe, then it decides to pop up Network Detected... truly weird..

Same NO Wifi Issue here too
Running all latest ROMS (see my sig.)
When I turned Wifi, it appears from the device to be working, but it did NOT pick up any signal at all. But...
I DID get Wifi to finally come on, I believe, by turning OFF my Cellular signal in the Connections app, and then turning on Wifi. I think it took a couple of mins to popup, saying my ssid was found at that point.
If anyone finds a real solution, please post!

Hi guys,
I've been reading the forum long time and this is my first post.
My phone is Softbank X01HK and I am currently running Black 2.5 with the buzzing cap, SPL-2.10-Oilpro and Radio 1.38.00.11. My phone works well on Wifi, HSDPA, GPRS-EDGE and GRPS. I have 2 phone numbers with 2 different provider in Hong Kong, Hutchison 3-HK and Peoples.
I used to have SPL-1.40-Oilpro and until yesterday I flashed to SPL-2.10-Oilpro. Surprisingly but weird, I have found my 3G reception at home gets 1 to 2 bar better right after I have SPL-2.10-Oilpro installed. It is so weird cuz I thought the boot loader has nothing to do with the 3G reception, also, everything else still works without any noticeable different.
I was planned to upgrade my Radio Rom to 1.40, but I think I'll stick with 1.38.00.11 for while.
Hope this help

pl55 said:
I've tried everything, including using SNIFI and SOCKET WIFI softwares to connect to my existing netgear router(WEP enable) after upgrade to WM6 Black 2.5 and Radio 1.40 but unable to detect the network . After several hours, the only solution that work is: Turn on WIFI, DELETE existing connection, and add new connection (with WEP key)- and everything works !!!! . Hope this help
Click to expand...
Click to collapse
cheers!!! this one works for me.

Wifi

is it even possible to brick your ****ing wifi!?!?
im going to reload an original HTC rom...flashing a different radio did nothing

ph03nix said:
is it even possible to brick your ****ing wifi!?!?
im going to reload an original HTC rom...flashing a different radio did nothing
Click to expand...
Click to collapse
Hmm no, restart your router, edit, what's your hermes, dopod? jasjam? 8525?

nope, many other devices can connect to wifi fine (even wizard)
mine is HTC hermes, not branded
im currently putting the earliest version original rom back on
the wifi was working fine when i got the phone, now its screwed
it cant be the radio either, because cell was still working perfect
i am very
my wizard survived multiple rom updates/radio updates/blows to the head and never had any problems

ph03nix said:
nope, many other devices can connect to wifi fine (even wizard)
mine is HTC hermes, not branded
im currently putting the earliest version original rom back on
the wifi was working fine when i got the phone, now its screwed
it cant be the radio either, because cell was still working perfect
i am very
my wizard survived multiple rom updates/radio updates/blows to the head and never had any problems
Click to expand...
Click to collapse
You'll be surprised what a restart to the router can do, have you done that yet?

lol yes i have
lol
now my device is completely bricked
still saying spl 2.10.olipro after original rom flash
i believe i can unbrick

ph03nix said:
lol yes i have
lol
now my device is completely bricked
still saying spl 2.10.olipro after original rom flash
i believe i can unbrick
Click to expand...
Click to collapse
Well good luck with that, it will say 2.1 even after original rom. Read mrvanx guide on my signature for downgrading spl.

i will either unbrick with sd card or hammer
its choice

only thing im worried is after unbrick will wifi work
edit: just unbricked radio, rom loads now

WAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
i fixed it!?
i put radio 1.47.30.10 on instead of the 1.5x
umm....i guess i will try a rom that didnt involve ****ing up my wifi and see what happens.....im definately not touching my radio anymore though

hmm now i can officially say WTF
my wifi worked just fine with the original WM5 and the updated radio
now with CRC's rom (i thought PDAViet's was the problem) my wifi no longer works
any ideas? its kinda strange to me two roms dont work with wifi
i should try one from a diffrent WM build

ph03nix said:
hmm now i can officially say WTF
my wifi worked just fine with the original WM5 and the updated radio
now with CRC's rom (i thought PDAViet's was the problem) my wifi no longer works
any ideas? its kinda strange to me two roms dont work with wifi
i should try one from a diffrent WM build
Click to expand...
Click to collapse
I think you are doing something wrong, if wifi works, it works, no matter what ROM, I have used CRC and PDAViet's 19900 build before, and it works fine. Radio only up/down the signal strength to your carrier.

how is that possible?
the original WM 5 i just connected and it worked perfect, i tested IE and everything
just flashed CRC's rom, and now wifi doesnt work at all again
please tell me what possibly could be wrong
it gives me the error 'Cannot connect to the network. Check your network and service provider settings and try again.'
it was just working perfect before

ph03nix said:
how is that possible?
the original WM 5 i just connected and it worked perfect, i tested IE and everything
just flashed CRC's rom, and now wifi doesnt work at all again
please tell me what possibly could be wrong
it gives me the error 'Cannot connect to the network. Check your network and service provider settings and try again.'
it was just working perfect before
Click to expand...
Click to collapse
Have you run HTC connection wizard/checked your wifi settings? Do you have your router set to only accept some mac addressee's? Do you use DHCP or give each device static IP's? Do you have a WAP/WEP get, if so, did you put it in correctly?
Never had any wifi problems with my hermes, now, Blueangel, you where lucky if it would turn on

yep everything, i turned off everything and completely unsecured my network
im going to try an older WM build and see if this fixes the problem
in Wireless LAN it seems the connection establishes ok, then it just cuts me off and said it cant connect to the network
like i said, WM5 just connected on its own perfectly ok

k... im going to try one more thing and thats it

k my wifi will only work with WM5 and will sometimes require a soft reset if power is turned off while its running on WM6
doesnt work at all on 6.1 either
but WM5 it works fine
any suggestions?

k well im gonna figure this out either way
im taking the official wm6 rom (os only) from htc and see if it works
if it doesnt, im gonna pull the wm5 official rom, and if that works, im going to be

ph03nix said:
k my wifi will only work with WM5 and will sometimes require a soft reset if power is turned off while its running on WM6
doesnt work at all on 6.1 either
but WM5 it works fine
any suggestions?
Click to expand...
Click to collapse
Sounds like you might have dodgy radio hardware, everything else connects okey? To the wifi that is, and have you tried another wifi network?

HTC's 3.35.255.1 Pre-Release works ****ing fine
yes, everything else works (as well as on all other roms)
i even tried Schapps WM6 rom, wifi doesnt work
the HTC release i have now is WM6 too and has no wifi problems
i really dont know, but iv had enough of this for one night
ill deal with this tommorow, the official release is working fine

hmmm iv been doing some reading
i read http://groups.google.com/group/micr...ireless/browse_thread/thread/fa20e23f074a391b
it didnt fix my problem, however, when i use a static IP address in settings, it seems to connect and establish a connection fine, it just wont work with it
when i dont enter the settings, it screws up and disconnects
anyways i think this problem is solvable, im just going to have to figure out how
edit: yes i put a non-working wifi rom back on, if it works in offical roms, then it has to work in 6.1 roms somehow....

No internet connection

Hello,
since a few days my HTC Desire couldn't establish an internet connection. On the internet icon (everytime grey instead green) at the notification bar, only one arrow blinks sometimes. The APN is correct and i tried different ROMs and Radios. What's now? I've no warranty anymore and without internet a smartphone is senseless.
regards

This is xda-developers, how can it be that there's nobody with an idea?

No one?
*push*

What rom? Have you tried to install a new radio?
Did you flash anything before this error occured?

Tried 6 different radios and an ASOP Rom und a Sense Rom
No idea what I flashed before this error occured

Is this error only when you are connected with the mobile interent connection or also on wlan?

Tested another SIM (and carrier), but also no connection
Probably a hardware defect?

I dont know, but it could be that a radio was not installed completely or wrong. Can you connect to the internet with wlan.

Yes, WLAN works
I try another recovery and flash a new radio

Flashed AmonRA and a radio, but don't work

[Q] Wifi problems

Wildfire with
ROM: CM 7.2
Kernel: 2.6.35.14-InfinityPlay
Radio: 3.35.20.16
For the last year wifi, after a short period of time i can't download, I mean, some times i connect, get into market for example and download/update, but after some time i can't, it's not a market problem because i can't download from anywhere, regardless the app, but i can browse normally(!), the problem is only in downloading. Even if i reset wifi, go in and out of airplane mode, restart the phone etc, the problem stays. Maybe if i try the next day it works ok. I dont know how it occurs or when and why, nor how/why/when it gets fixed...
The problem started when I had rompuzzle 2.2.1 a year before, till now. Since then I have flashed stock rom with 2.2.1, jockerdroid 4.2, cm 7.1, and cm 7.2 that i have now.
I suspect it is a radio problem, but can't be sure.
*Also sometimes I have low gsm signal, even in well covered areas.
Any ideas/suggestions?
Thanks

You said you flashed stock rom, i suppose it was a stock rom from Android?
It really looks like you have a problem with your radio (like you allready say for yourself).
It seems you have the newest one, so try a lower version.
I you have troubles finding a radio because the host is down or something just pm me or try google.
Hope this helped! Kind regards.

try radio 20.10

i have tried all 3 radios, but the problem stays. But i have noticed that when i enable tether and i put in the console the command for reverse tethering *usually* it gets fixed until the next time that i disconnect from my wi-fi.

i have not the same but similar problem,after a while i get dropped from router,even if my phone says its connected...this started to happen after changing our router (which i couldnt and cant set up) and setting up "N" wifi network...i found two options,how to solve it..
1)use free app wifi fixer from google play store (which somehow manages to know if you are connected or not and can automatically reassociate with router again)
or
2)flash HCDR.Kernel_v4_Flashable.zip from op on this page http://forum.xda-developers.com/showthread.php?t=798471
maybe it help, maybe not.. gl

I have *temporary* solved the problem by following the reverse tethering guide... I don't know why but after doing this procedure I can connect normally to my router, and if it disconnects (rarely) I just repeat the steps of the guide.

[Q] WiFi stopped working.. Tried everything

I've done a lot of searching around here and couldn't find anything that could get my WiFi working again. A while back I was following a tutorial that would let me edit my network bands, but I could never get it to work.. Shortly after I noticed my WiFi stopped working. I'm not sure if it's a coincidence or not. Anyways, I've tried everything. I've used stock RUU's to flash it back to stock (erasing everything), installed different ROMs, Kernels, etc. I've noticed the WiFi will work shortly after a fresh install but after a bit it just stops. Turning it on will give a WiFi error followed by "settings has stopped working". I've even opened up my phone and made sure the antennas were connected correctly but that didn't do anything. My Bluetooth works just fine though!
I'm s-off and rooted

Helped one of my friend - installed latest firmware update, but he has phone without root and locked bootloader + s
-on

Where can I find the firmware update?

Did you try using a different SSID ?
Or did you verify the RUU flashes clean ?
Maybe your WiFi Chip is broken