Hi all!
After spending about 45 minutes searching through the various threads, and educating myself with all the VC1.6 issues, I am left with one question:
On a WM6 8525, with NO bluetooth headset (Just straight ahead through the PocketPC speakers)....
...has anyone got it to announce incoming calls and appointments?
Many of the other threads discuss issues with the Bluetooth headset.
I don't have a BT headset, so I am just concerned with incoming calls.
Is there a fix for this (registry hack or otherwise), or must we wait for a patch from MSFT?
Thanks guys!
Mike
Michael_514 said:
...has anyone got it to announce incoming calls and appointments?
Click to expand...
Click to collapse
With WM6 announcement of incoming calls does not work. It is an issue with WM6.
um thats not true. its a issue with the hermes/tytn.. it works fine on my wiza200 but refuses to work on my hermes
My 8525
Well with my 8525 WITH my bt headset it still announces everything, just thru the phone speaker(even though I have it checked to only do it thru bt headset). So I think that it will announce them over your phone for you.
Michael_514 said:
Hi all!
After spending about 45 minutes searching through the various threads, and educating myself with all the VC1.6 issues, I am left with one question:
On a WM6 8525, with NO bluetooth headset (Just straight ahead through the PocketPC speakers)....
...has anyone got it to announce incoming calls and appointments?
Many of the other threads discuss issues with the Bluetooth headset.
I don't have a BT headset, so I am just concerned with incoming calls and calendar annoucements.
Is there a fix for this (registry hack or otherwise), or must we wait for a patch from MSFT?
Thanks guys!
Mike
Click to expand...
Click to collapse
Calendar announcements works fine. Haven't set up incoming calls cause i would rather look at the screen for those and use caller id.
Mark
Thanks for the clarification, Mark.
I stand corrected.
I just set up a test appointment and indeed it announced it.
On the other hand, no luck with incoming calls through the PPC speakers.
I guess its confirmed, then. No luck with an 8525 and VC 1.6.
We shall await a patch or a new build!
Thanks!
Mike
On my 8525 with WM6...
Caller ID announces just fine through built in speakers.
All announcements and calendar warnings announce through built-in speakers.
In short, no issues through built-in speakers.
Via bluetooth, things get spotty. I have the phone set to only announce through built-in.
As always, your mileage may vary, but mine works fine.
Michael_514 said:
Hi all!
After spending about 45 minutes searching through the various threads, and educating myself with all the VC1.6 issues, I am left with one question:
On a WM6 8525, with NO bluetooth headset (Just straight ahead through the PocketPC speakers)....
...has anyone got it to announce incoming calls and appointments?
Many of the other threads discuss issues with the Bluetooth headset.
I don't have a BT headset, so I am just concerned with incoming calls.
Is there a fix for this (registry hack or otherwise), or must we wait for a patch from MSFT?
Thanks guys!
Mike
Click to expand...
Click to collapse
Yes, it works on the [faria] version, it start with the normal ring and then lowers the volume and play the contacts name(you must enable from settings).
it does not work with lvsw ver or v3pg ver..
jacob-mda said:
it does not work with lvsw ver or v3pg ver..
Click to expand...
Click to collapse
I can confirm this. It also does not work the the Cingy WM5 Rom. It did work with faria.
doesnt work on black or custel's either.. seems to only be working on farias so far..
edited..wrong info
Is Faria's WM6 still the only one?
Any of the recent WM6 roms get the incoming call announcements to work?
vc 1.6 works just fine on my 8525. after configuring it, it announces incoming calls.
i am currently running vp3g's 3.62 ROM.
There is a version of VC 1.6 on this forum I think that does annouce incoming caller. It works for me on Schap 3.60a whereas the previous on of 1.6 I tried did not. The problem with this one was that it didn't allow me to control with my Jawbone anymore.
Related
I use the Bluetooth connection between the HTC and the Parrot and it works just fine in my car…. As far as the phone hand-free functions are concerned.
When I installed TomTom (ver. 6) on the HTC I assumed that the voice of the navigator would also come out through the car speakers connected to the Parrot.
This is not happening! The phone conversations are going through the Parrot and INDEPENDENTLY the TomTom voice comes out of the HTC!
This creates quite a mess when I am driving (while TomTom navigates) and I get a phone call: TomTom keeps on talking over the phone conversation and most of the HTC screen is covered by the “incoming phone call” notification!
Moreover the ringtone of the HTC does not seem to work when connected to the Parrot and only a very feeble chime is there to signal an incoming call.
Does anyone have a solution to fix this inconvenient situation?
Thanks in advance for the insight!
I've got the same setup as you and have the TomTom voices coming out of the phone which has been the same with my previous phones such as the SPV C550 and he HTC wizard. I think it's down to the bluetooth stack implementation on the Windows Mobile phone. My mobile mutes TomTom when I am in a call and I get a flashing mute icon shown on the TomTom screen.
One thing to try is the Jetware bluetooth extension http://www.jetwaremobile.com/ which is designed to improve compatability with the Parrot systems. It will certainly help you get the correct ringtones through the speakers, though I'm not sure if it will help with TomTom voices.
Neil
Hello
There is a tool cald btaudio i have installed it on my p3300 and when i am connected with my parrot i switch btaudio on and i have tomtom voice true my speakers
I dont know were i dl it but when you google on btaudio sure you be able to find it !!
Greetz
Thanks guys
Sorry I have been so busy lately I barely logged in the Forum. Just wanted to let you know that I have seen your replies and will look into the solutions you suggested. THANKS.. will get back to you soon with (hopefully positive)feedback
Vaguely related and possibly usefull information here:
http://www.modaco.com/Guide-to-usin...oneer-Bluetooth-Car-Stereoand39s-t252613.html
hotatomic said:
Hello
There is a tool cald btaudio i have installed it on my p3300 and when i am connected with my parrot i switch btaudio on and i have tomtom voice true my speakers
I dont know were i dl it but when you google on btaudio sure you be able to find it !!
Greetz
Click to expand...
Click to collapse
Thanks hotatomic! I have installed that appz and it works!!! Great tip!
Any other useful tools for the P3300 we could exchange?
Cheers!
SiperX
Hi there I'am new here.... seached the forum and google a lot but didn't find an answer...
Just flashed from XDALive 2.0 to Black 2.0, radio 1.38.00.10 and HardSPL v6 with help of the manual of mrvanx.
My problem with the rom of XDALive 2.0 was that TomTom 6 keep hanging serveral time. The headset (bluetooth build in CAR, peugeot 207) was working perfectly. After the upgrade to Black 2.0 the TomTom problem was solved , it works perfectly now. The only what came up was the bluetooth headset probleem. The connection is ok but I don't hear any sound??
Flashed back radio ROM to 1.35 no results...
Found something interesting...
When its not connect with the carkit, turn on bluetooth, dail a numbers and turn on the Speaker, it will eventually connect to the carkit automaticly (and I got sound thourgh the carkit!
When searching for bluetooth devices it will find the headset and the carkit goes into 'calling mode'. When dailing a contact directly after that the carkit will work. But the next try it will mute the radio but doesn't give any sound on the carkit.
When allready connected with bluetooth on the carkit it wont give any sound thourgh it.... strange.. Tried serveral other ROMS but they are giving me the same problem...
Widcomm BT Stack (http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72) also tried, didn't help... anyone some suggestions?
PS.: My old nokia still works, it can't be the carkit..
Question for you. after you setup your carkit do you go into the bluetooth and set it to your handsfree device. There seams to be a few changes to the way WM6 chooses the handsfree device if you have several set up.
I have to change in WM6 bluetooth which headset I am using when I switch between the 3 headset I have. I have to go to Start\Settings\Connections\Bluetooth Click/Hold on my headset that I want to make active - you will get a Menu wit Edit/Delete/Set as Hands-free/Set as Wireless Stereo (last should be grayed out if it doesn't support Strereo)
Choose Set as Hands-free
After doing this my headset works fine. Try it and see if it works for you.
jcb_home said:
Question for you. after you setup your carkit do you go into the bluetooth and set it to your handsfree device. There seams to be a few changes to the way WM6 chooses the handsfree device if you have several set up.
I have to change in WM6 bluetooth which headset I am using when I switch between the 3 headset I have. I have to go to Start\Settings\Connections\Bluetooth Click/Hold on my headset that I want to make active - you will get a Menu wit Edit/Delete/Set as Hands-free/Set as Wireless Stereo (last should be grayed out if it doesn't support Strereo)
Choose Set as Hands-free
After doing this my headset works fine. Try it and see if it works for you.
Click to expand...
Click to collapse
When searching for a new bluetooth device WM6 sees a headset and the connection is successful. The 'Set has headset' is availible and is set. The option Wireless Stereo isn't support I think, its not availible as an option.
When calling you can turn on/off your headset back to the phone. That works but there is still no sound on the headset.
balck 2.0 does have issues. i also have same with motorola hs850.
only just found out. havent fixed.
bt connects as phone pad shows it.
headset bleeps on connect call and disconnect call. but no sound is sent or received.
always set to headset though not hands free.
will have to test further but definitely an issue. i didnt ask jj out of respect for his withdrawl of support.
I don't think it a problem with Black 2.0. Too many people say it works no problem.
I'm on black and all three of my head sets work like a charm. I have 2 Motos an H810 and a H700 and an Plantronics 510. I also have been able to use internet sharing, BT file transfer, and BT sync with Black 2.0
But it could be an incompatability between the WM6 M$ BT stack and your hands free kits.
Test your phones with another BT device and see what you get.
Same problem with HS850
simon_darley said:
balck 2.0 does have issues. i also have same with motorola hs850.
only just found out. havent fixed.
bt connects as phone pad shows it.
headset bleeps on connect call and disconnect call. but no sound is sent or received.
always set to headset though not hands free.
will have to test further but definitely an issue. i didnt ask jj out of respect for his withdrawl of support.
Click to expand...
Click to collapse
I have exactly the same problem, and I didn't solved yet....but I've found this bypass:
When the phone rings I answer with the bluetooth handset and receive the beeb on connect call.....then I close the BT headset and as soon as I re-open it, I have the headset working.....I have to do this for every incoming or outgoing call.
My BT headset was working well with the black 1.2.
This is the only issue I've found in the black 2.0.....I think is the most stable and fast rom.
Bye prengo.
jcb_home said:
I don't think it a problem with Black 2.0. Too many people say it works no problem.
I'm on black and all three of my head sets work like a charm. I have 2 Motos an H810 and a H700 and an Plantronics 510. I also have been able to use internet sharing, BT file transfer, and BT sync with Black 2.0
But it could be an incompatability between the WM6 M$ BT stack and your hands free kits.
Test your phones with another BT device and see what you get.
Click to expand...
Click to collapse
My other Bluetooth devices are working fine. My bluetooth GPS receiver works just fine with TomTom... no issues there.
Just flashed back to XDA-Live (v0.20.1) and the headset works without any problem.
Only thing now is Tom Tom 6 hangs directly after the start of it. Anyone familiar with this issue?
thx
PS.: what is the differance between the Black 2.0 and XDA-Live (v0.20.1) ? other bluetooth driver versions besides the os version? Maybe there is a way to combine..?
A common thread seems to be the HS850
I have the exact same problem with my HS850. I get the call connect beeps but no sounds come through. The issue exists if the headset is connected when the call is made. If I make the call, then flip the boom and turn the headset on, then I get sounds no problem.
I had this issue with both LVSW 4-08 and Black 2.0. I eventually went back to XDA Live 0.20.1 and my BT issues all went away.
cruzer said:
PS.: what is the differance between the Black 2.0 and XDA-Live (v0.20.1) ? other bluetooth driver versions besides the os version? Maybe there is a way to combine..?
Click to expand...
Click to collapse
WMXL .20 is based on a beta WM6 build and Black 2.0 is built on an RTM build (non-beta)
With Moto HS850 too.
edwinyuen said:
I have the exact same problem with my HS850. I get the call connect beeps but no sounds come through. The issue exists if the headset is connected when the call is made. If I make the call, then flip the boom and turn the headset on, then I get sounds no problem.
I had this issue with both LVSW 4-08 and Black 2.0. I eventually went back to XDA Live 0.20.1 and my BT issues all went away.
Click to expand...
Click to collapse
Exactly the same here with HS850. Tried everything after 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10.exe but kept getting no sound.
I have experienced the same problem with my 407 hands free system. My Orange SPV C600 works without a problem, it does not show signal strength and battery level though. Using my M3100 with any of the following listed below works perfectly:
HTC English QTEK_001 2.11.255.1 03/07/07 2.11.255.102 1.38.00.10 32.71.7020.12H OS 15673.3.3.1 AKU 3.3.1
Cingular English CWS__001 2.15.502.3 04/09/07 ?? 1.40.30.00 32.73.7020.16H OS 15706.3.5.2 AKU 3.5.2
XDA-Live (v0.20.1) English 3.22.110.1 01/04/07 None None 5.1.195 (WM6) OS 17217.6.0.0
I have found all the above roms work perfectly with my TomTom 6.030 software. I am currently using Black Version 2, I have also used LVSW roms and found the same issue with any running the OS 17736.0.2.0
mike6502 said:
I have experienced the same problem with my 407 hands free system. My Orange SPV C600 works without a problem, it does not show signal strength and battery level though. Using my M3100 with any of the following listed below works perfectly:
HTC English QTEK_001 2.11.255.1 03/07/07 2.11.255.102 1.38.00.10 32.71.7020.12H OS 15673.3.3.1 AKU 3.3.1
Cingular English CWS__001 2.15.502.3 04/09/07 ?? 1.40.30.00 32.73.7020.16H OS 15706.3.5.2 AKU 3.5.2
XDA-Live (v0.20.1) English 3.22.110.1 01/04/07 None None 5.1.195 (WM6) OS 17217.6.0.0
I have found all the above roms work perfectly with my TomTom 6.030 software. I am currently using Black Version 2, I have also used LVSW roms and found the same issue with any running the OS 17736.0.2.0
Click to expand...
Click to collapse
It's great that you tracked this down so specifically. I guess this means for those of us with these issues, we have to avoid newer WM6 builds until someone looks into this.
idee2000 said:
Exactly the same here with HS850. Tried everything after 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10.exe but kept getting no sound.
Click to expand...
Click to collapse
Can't just be the ROM as my HS850 works perfectly with Black Pro 2.0
rabdo said:
Can't just be the ROM as my HS850 works perfectly with Black Pro 2.0
Click to expand...
Click to collapse
I have the same problem as the others with my HS850. No audio if the headset is on when a call is made or received but if I close the boom and re-open it, viola it works again.
I did have a problem with HTweakC where I changed the A2DP setting to on and now no matter what I do I can't get it off again. I might re-flash and see if that helps.
I don't know if it matters but I have MS voice command on my phone, even though the MSVC16BThack doesn't work anymore. (my phone is an 8525) Hope someone can figure this out, I really like the speed and stability of this ROM but if I can't get my BT to work I'm going to have to downgrade.
AdamsJourney said:
I have the same problem as the others with my HS850. No audio if the headset is on when a call is made or received but if I close the boom and re-open it, viola it works again.
I did have a problem with HTweakC where I changed the A2DP setting to on and now no matter what I do I can't get it off again. I might re-flash and see if that helps.
I don't know if it matters but I have MS voice command on my phone, even though the MSVC16BThack doesn't work anymore. (my phone is an 8525) Hope someone can figure this out, I really like the speed and stability of this ROM but if I can't get my BT to work I'm going to have to downgrade.
Click to expand...
Click to collapse
I am using Cyberon Voice Commander v2 - maybe that is why it is working for me
Hi,
I am using radio rom 1.40.30 and Black 2.0.
I am using H700 BT headset
the problem i face are opposite from you all.
If i am already talking halfway and i flip the boom to continue talking with the BT headset...it won't work.
if i receive a call and I flip the boom while the phone rings, it is ok and i can even press the button on the h700 to answer the call.
Radio 1.40.30 seems to connect with the BT headset much faster.
last time when i was using my previous default factory rom, when i flip the boom while the phone is ringing, it will take ages to connect
why not u guys try radio rom 1.40.30 also
rabdo said:
I am using Cyberon Voice Commander v2 - maybe that is why it is working for me
Click to expand...
Click to collapse
I did a hard reset, paired the headset, and tried it right away and still had the issue so it's not VC 1.6. It has to be related to the ROM as I have the same Radio ROM for all three OS images and only the XDA Live ROM works correctly.
edwinyuen said:
I did a hard reset, paired the headset, and tried it right away and still had the issue so it's not VC 1.6. It has to be related to the ROM as I have the same Radio ROM for all three OS images and only the XDA Live ROM works correctly.
Click to expand...
Click to collapse
Sorry, what I meant is that perhaps Cyberon Voice Commander is 'fixing' the issue on my system, rather than saying MS VC 1.6 was causing the problem. Next time I hard reset I will test my headset BEFORE installing cyberon software
Ok I'm still having this problem and this is what I have tried so far:
I downgraded to XDALive v0.10 and my BT worked, but no WiFi
So I upgraded to HardSPL v6, then installed the 1.40.30.00 Radio rom, and then went back to Cingular Black 2.0, WiFi back but no BT unless headset is activated after call is initiated.
Installed Cyberon Voice Commander, didn't effect anything, still no BT
Removed Cyberon Voice Commander and re-installed MS VC 1.6 installed all the hacks and still no audio in the headset.
So it looks like it is something in the ROM that is killing the BT functionality. Maybe because the XDALive is based on a beta WM6 and the Black is based on a full version?
Blueooth activation and announce calls over the Hermes speaker. I tried the Faria ROM, and it announces calls on the speaker but the headset activation does not work. I have tried several others and the headset activation works with the patch but the announce callers over the speaker does not. Anyone have both working. (Note, not announcing calls over bluetooth as I know that does not work)
thanks
If i am correct the faria rom has the newer voice command version which is not available as a stand alone cab or application? sure wish it was though!
Yes but even with Faria only one of the two worked. Bluetooth inititation did not
Shhhh...
M$ VC is not freeware so discussing it as being cooked into ROMS is not a good idea...
The touch pro2 can't carry out the voice speed dial function with my bluetooth headset.
tap the call handling button on the headset can not make anything happen. Neither by press and hold the button.
The only function still remain with the sony-ericsson HBH-DS970 is double tap the call handling button on the headset to re-dial the last number.
The voice speed dial function is very useful when your hands is busy, such as driving. What can I do now?
I have two bluetooth headset, one is sony-ericsson HBH-DS970 and the other is SIEMENS HHB-750.
The software I use is cyberon Voice Speed Dial V1.2.
The following is an answer from HTC:
"I do not know how you have got Cyberon installed as it is not instaled on the device by default.
I therefore cannot give you any support as the devices do not have any voice command software installed out of the box.
best regards,
HTC Europe Support"
I can't have anymore words on this.
Correct it doesn't work There are a number of threads about this around here.
I use Microsoft Voice command and have to (long) press the send key on the phone then it kicks in through the Bluetooth car kit. The general theory is this is a side effect of the change in Bluetooth stack made on this phone, I'm sure we'll see a fix, but probably not until we start seeing cooked ROMs.
Gordon
All you can do is to change the settings for the Send button to launch CVSD when you hold it, but for doing this with your headset's button, unfortunately you'll have to wait... for another ROM...
all the best
Reporting in from Canada here... after reading a couple of threads about issues with bluetooth voice dial, I got concerned and tried it this evening with my Jabra BT3030 and Telus TP2. Voice dial using the included MS Voice Command software works properly when I press the voice dial button on the BT3030. So... the problem isn't universal; we have at least some bluetooth devices out there that work properly with voice dialing on a TP2.
Hope that helps,
--VelJharig
VelJharig said:
we have at least some bluetooth devices out there that work properly with voice dialing on a TP2.
Hope that helps,
--VelJharig
Click to expand...
Click to collapse
Would you please list some detail information,such as type number, of the bluetooth devices which work perfectly on voice dial?
I seached on this forum and many other chinese forum, almost all of them report the voice dial can't be launch for the call handling button on the bluetooth device.
Thanks in advance.
net_walker said:
Would you please list some detail information,such as type number, of the bluetooth devices which work perfectly on voice dial?
I seached on this forum and many other chinese forum, almost all of them report the voice dial can't be launch for the call handling button on the bluetooth device.
Thanks in advance.
Click to expand...
Click to collapse
Hi net_walker,
I'm not sure if I correctly followed your question, but if you're asking for the model number of bluetooth devices that seem to work with the TP2, I gave that in my original post. It is the Jabra brand, model "BT3030" that works correctly for me on my Telus TP2. The basic web page for the model is here:
http://www.jabra.com/Sites/Jabra/na-us/Headsets/Pages/JabraBT3030.aspx?productfamilytab=Details
On that website, they list it as the model BT3030, with what I believe is an extended specific model number of "(100-93030000-60)".
Hope that is helpful,
--VelJharig
mmmh ! Very interesting !
At first time, i've thought for a BDR tweack to solve the problem.
Now it sounds like it is radio Rom dependant...
VelJharig said:
So... the problem isn't universal; we have at least some bluetooth devices out there that work properly with voice dialing on a TP2.
Hope that helps,
--VelJharig
Click to expand...
Click to collapse
That's great news! Hopefully this will give the chefs here something to work with.
Gordon
In the forum, i'v seen somebody who had posted the Telus TP2 Sys and OEM's. I'm dowloading it and trying to analyse the OEM concerned with Ms Voice Command. Hope it can help us to solve the prob.
Schmurtz1968 said:
In the forum, i'v seen somebody who had posted the Telus TP2 Sys and OEM's. I'm dowloading it and trying to analyse the OEM concerned with Ms Voice Command. Hope it can help us to solve the prob.
Click to expand...
Click to collapse
I'd be that person. If you need any other details regarding file info from the device, just let me know.
Thanks for your share.
Because at this moment we didn't have an HardSPL from our dear Olinex Team (hope they do there home work (lol)) to make a cooked rom, i'm looking for something like OEM to CAB to test the OEM into my TP2 and maybe solve the problem for all of us who can't use Bth button to make a voice call.
VelJharig said:
Hi net_walker,
I'm not sure if I correctly followed your question, but if you're asking for the model number of bluetooth devices that seem to work with the TP2, I gave that in my original post. It is the Jabra brand, model "BT3030" that works correctly for me on my Telus TP2. The basic web page for the model is here:
http://www.jabra.com/Sites/Jabra/na-us/Headsets/Pages/JabraBT3030.aspx?productfamilytab=Details
On that website, they list it as the model BT3030, with what I believe is an extended specific model number of "(100-93030000-60)".
Hope that is helpful,
--VelJharig
Click to expand...
Click to collapse
Hi, everybody,
Did someone know some other bluetooth headsets work with Touch Pro2 to carry out the Voice dial function,except this one "Jabra BT3030" ?
Yes, I have the Tmobile TP2 and the Bluetooth voice dial function works with the MSVC that came with the phone. There is a 5-7 seconds wait until the microphone activates. So after I hold down the call button on the ear piece for few seconds to activate voice command, I have to wait till I hear a second sound that tells me the phone is now listening. Other than this, it works just fine.
Its an old plantronic bluetooth ear piece, dont remember the model number, but its the one with silver stripes down the length of the device on the sides. Its in my car, I will check later and add that if anybody needs the number.
My Plantronics headset can call voicedial the same way it did on my Kaiser - a long press of the "call" button.
Genesis3 said:
My Plantronics headset can call voicedial the same way it did on my Kaiser - a long press of the "call" button.
Click to expand...
Click to collapse
Hmmm, very strange.
I have a Plantronics Discovery 925 myself and it's supose to be one in the winner team of Plantronics, but still nothing
And I have to say that it works just perfect with Touch Cruise, Diamond and HD.
Not with this one. You're sure you didn't done anything to your phone regarding this?
all the best
Nope - one of the first things I checked when I got the phone, it worked right out of the box before I started hacking on the registry and such.
DesperateScorpion151 said:
Yes, I have the Tmobile TP2 and the Bluetooth voice dial function works with the MSVC that came with the phone. There is a 5-7 seconds wait until the microphone activates.
Click to expand...
Click to collapse
I can confirm that issue on the T-Mobile Touch Pro 2. It is a VERY long time to wait for MSVC to start listening. I wish there was a way to put the standard Bluetooth stack on here so that Voice Command would work better.
I use a variety of Bluetooth headset devices; BlueAnt S1 car kit, BlueAnt Interphone (motorcycle helmet kit), Nextlink G5, Motorola 850 Stereo headphones... and all have the same slowness for activating MSVC.
I have a MOTOROKR™ T505 and if I hold the button down it'll do last number redial but I have to hold the dial key on the phone down to get Cyberon to listen.
Can't use MSVC as it won't understand me. Lot's of humans have this problem too so it's no surprise
Anyone get anywhere with this ?
Is it fixed in 6.5 or are there any ROMs with a fix cooked in ?
I have the same problem with my SE bluetooth
I have a Tilt2 (wm 6.5) stock with a Motorola H17 and voice command works fine. About 2-3 sec after headset button push and MSVC is listening.
Hello,
I've had my Tilt2 for 2 months now and am ready to get a headset. After many searches I can't find a definitive list of headsets that are working/ not working correctly.
I'm using a stock ROM and have the Tilt2 2 tweaked to 43% memory usage on boot-up. The phone is fast and everything works correctly. Also using SPB mobile Shell.
Has anyone tied in the Bluetooth 2.1 vs 2.0 headsets with correct operation? I want the voice command, audio passthrough, and buttons to work correctly.
Maybe we can start a list of Phone - ROM version - Headset - Whats working/not working.
I'm mainly concerned with the stock ROM but any info may assist others.
Thanks
Jim O
Well, I have the Jawbone Prime & Motorola HX-1 and both work fine.
Motorola H710 works fine as well.
Thanks for the info. Does the voice command work for making calls and you can also hear music files and audio from websites?
Thanks Jim O
Surely more folks can contribute to a good list. Lets get some more response going. This could be of great benefit to one and all.
Thanks!!!!!
Samsung WEP 850 with voice command works just fine.
The Sony DRBT100CX stereo bluetooth earbuds also work very well with the Tilt 2. All A2DP/AVRC audio and handsfree calling functions are supported. Nice bargain at $50 as well.
Yes, but...
... has anyone found a BT headset that announces the incoming caller ID over it instead of the phone's speaker?
I've tried a couple of older as well as one new BT headset. All pair and work flawlessly with my Tilt 2, but none of them will announce the incoming caller ID over the headset as it did with my original Tilt.
Yeh, I'm pretty sure this was a screwup in the Widcomm BT stack but just want to make sure. FYI, HTC tech support states that none of their phones do this! When I asked 'em why the old Tilts did, I didn't get any more response.
Well, I picked up a new Motorola H17 12/30/09. Everything works as advertised, except the incoming caller announcement (on phone announcement only). This headset was released only a couple months ago with the latest Bluetooth 2.1 and all the other amenities so this problem does seem to be a problem with the stack.
On a side note, this headset works great. Get ALL phone sounds transferred and also volume control on both the phone and headset. Works great with streaming video/audio. And it is loud, usually have it set to mid volume. Also, I bought it from an AT&T store ($80) and he stated that if anything goes wrong with it for 1 year just bring it in and he will replacement.
Jim O
I have the Jabra HALO and works wonderfully well with my TP2, running Win6.5
jlmwrite said:
... has anyone found a BT headset that announces the incoming caller ID over it instead of the phone's speaker?
I've tried a couple of older as well as one new BT headset. All pair and work flawlessly with my Tilt 2, but none of them will announce the incoming caller ID over the headset as it did with my original Tilt.
Yeh, I'm pretty sure this was a screwup in the Widcomm BT stack but just want to make sure. FYI, HTC tech support states that none of their phones do this! When I asked 'em why the old Tilts did, I didn't get any more response.
Click to expand...
Click to collapse
The manager @ my local AT&T store has a Tilt 2 using a Blue Ant Q1 bluetooth & he says that his BT does all these things. I just ordered one so I will let you know when I get it. FYI he was using a Jawbone prior to the Q1.
Montea said:
The manager @ my local AT&T store has a Tilt 2 using a Blue Ant Q1 bluetooth & he says that his BT does all these things. I just ordered one so I will let you know when I get it. FYI he was using a Jawbone prior to the Q1.
Click to expand...
Click to collapse
I got my Blue Ant Q1 and it does announce the incoming calls over the blue tooth & your text messages, e-mail, reminders, your music- I like it. If you turn "announce incoming call off" in voice command it will not announce them over the speaker on the phone. I bought mine off e-bay for $48.99.