Related
Hi
I'm looking at purchasing an XDA IIi from O2, both to use as a PDA, phone and for SatNav. It's likely that I'll go with TomTom and I already have a Bluetooth GPS receiver.
I've already got an O2 blue headset that works with my SonyEricsson T610 and I'll also be wanting to use that whilst in the car.
I have some questions that I hope some of you might be able to answer...
Is it possible to use both a bluetooth headset and bluetooth GPS at the same time?
Does the XDA IIi support the O2 blue as the SE T610 does, i.e. I press the button and say the contact I want to call and then the phone (home, mobile etc).?
Thanks for any help!
GWG
Hi
I have the Jabra BT 200 headset and the Leadtek 9537 GPS unit. They both work fine at the same time on my Xda IIi.
I was checking the GPS using Pocket Streets (have not re-installed Tom Tom yet but I do not envisage a problem)
The BT setup seems better on the IIi, there wasn't any messing around with the COM port settings like there was with the Xda II.
If you mean the fonix VoiceDial software that comes with it, then yes, it does work that way.
On the whole, I am pleased with the IIi (I had the II for a year), the camera is flakey but I can live with that.
MarkySan...
Thanks for that... Looks like it'll do what I'm after
I might then have to become a regular on these forums!
Cheers
GWG
Be warned, if you mean the o2 CLIP blue headset (made by iTech), I also have it and have been unable to get it working. (Why oh why can I not have the old stack from the xda2 as that worked perfectly with headset profile)
At one point I was briefly able to get it installed as a handsfree device but it then stopped working. Before I got rid of my xda2 I tried re-pairing the devices and it worked great first time. Other BT headsets I had access to worked fine.
Does anyone else have this headset and an xda2i? I've posted about this before but got absolutely no feedback whatsoever. Could anyone tell me if they're using a clip style headset (not the ones that hook round your ear) with the 2i...how much it cost and what make etc. I may have to bite the bullet, sell the o2 headset and buy another one.
Cheers
Anthony
2 BT devices simultaneously on XDA II
This is an interesting problem. I've got an XDA II, a leadtek BT gps receiver and a nokia handsfree BT carkit, plus Tom Tom.
I haven't got them all working at once yet and have been told there is a problem getting the handsfree to work anyway.
This was from a so called reputable high st mobile phone chain (who also said that only one BT device could be connected at once).
Any help or advice appreciated....
David
Well, I got my XDA IIi and very nice it is too.. this is my first foray into the world of PDA so I've nothing to compare too, so I'm very pleased
I've twinned it with my O2 blue headset and it works fine.
Also got TomTom navigator and a bluetooth GPS (although you still need a cable for power across the dashboard! Doh!).
They both work together, although there does seem to be some strangeness when they're both on:
1. The GPS sometimes drifts off... although this is based on a 15 minute drive into Town only
2. When on a call, the GPS signal seems to go completely and TomTom doesn't know where I am!
I do have a question about WiFi and MMS if anyone could help...
I have a WLAN at home, whihc the XDA IIi seems to connect to fine. However, when I am connected to it, I cannot send or receive MMS messages.. I'm sure it's something to do with this 'Internet' or 'Work' stuff, but this is all rather confusing. Has anyone written an idiots guide to all these strange settings?
Thanks!
ive used it all week on calls and even had the voice through my jabra 250 gps stayed on all the time it was fine the only problem i had was i couldnt get gprs without a softreset
Alix, are you saying you got the Tom Tom voice directions through the Jabra?
If so, I'm off to get the i!
Firstly is this forum ONLY for developers?
Because you will quickly discover that I am not a developer but a confused user and I was hoping that I could get some advice here?
Anyway I have a Bluetooth headset and was considering getting TomTomGo but also wondered if the headset and a BT GPSr would work together.
Also does anyone know if we will ever get voice dialling working on MobilePPC? I had a brief discussion with someone at Fonix who said that "Microsoft does not expose the necessary functions to third party software developers like Fonix".
Actually, now I've been using it for a while, it seems the reason Tom Tom drifted was because of a loss of signal.
Using the BT headset and Tom Tom with the BT GPS together is fine.
What is annoying though is the fact that the Phone App pops up in front of Tom Tom and doesn't go away when the call is complete.
Also, when touching the button on the headset to open the connection with the phone, it doesn't automatically start the Voice dial, you still have to reach across and fumble about looking for the button on the side. Has anyone got any ideas if it's possible?
That being said, the voice dial works OK.. not brilliant, and the voice that tells me what it thinks I've said is rather disappointing.. I want to keep telling it to 'Please speak more clearly' !
And I too can hear the Tom Tom voice prompts through the BT headset when the conection is open, although I prefer not to.
See my note re what the Fonix guy said above.
aRGybaRGy said:
Well, I got my XDA IIi and very nice it is too.. this is my first foray into the world of PDA so I've nothing to compare too, so I'm very pleased
I've twinned it with my O2 blue headset and it works fine.
Also got TomTom navigator and a bluetooth GPS (although you still need a cable for power across the dashboard! Doh!).
They both work together, although there does seem to be some strangeness when they're both on:
1. The GPS sometimes drifts off... although this is based on a 15 minute drive into Town only
2. When on a call, the GPS signal seems to go completely and TomTom doesn't know where I am!
I do have a question about WiFi and MMS if anyone could help...
I have a WLAN at home, whihc the XDA IIi seems to connect to fine. However, when I am connected to it, I cannot send or receive MMS messages.. I'm sure it's something to do with this 'Internet' or 'Work' stuff, but this is all rather confusing. Has anyone written an idiots guide to all these strange settings?
Thanks!
Click to expand...
Click to collapse
You can ONLY connect to MMS via the O2 GPRS network. Since your WIFI is outside their network, and is somebody elses, they won't let you login to their servers to send. All the carriers work this way - it's how they charge!
Hi,
I have a XDAIIi, Nokia car kit and TomTom 3 bluetooth. I have been trying to connect my phone to the car kit using bluetooth. Unfortunately it will only connect for phone calls. Does anyone knows how to permanently connect the phone using a different profile, so that I can listen to music and voice instruction of my TomTom using the car audio system? Any help is appreciated. Thanks
Reda
Hi,
I have a XDAIIi, Nokia car kit and TomTom 3 bluetooth. I have been trying to connect my phone to the car kit using bluetooth. Unfortunately it will only connect for phone calls. Does anyone knows how to permanently connect the phone using a different profile, so that I can listen to music and voice instruction of my TomTom using the car audio system? Any help is appreciated. Thanks
Reda
All I can help you with is that using my Jabra I press the call end button on the headset and the sound for my Tom Tom and MP3s comes through the headset.
Hope this helps.
Thanks mindracing. Do you know what services/profile your jabra return when you enquire it?
KR,
Reda
It shows up as Hands Free connection to Jabra 250.
Status just shows Jabra 250/Audio Gateway.
If you know where else to look just ask.
Thanks mindracing. yesterday I tried every possible combination but it seems I cannot stream my music and Tomtom instruction to the car kit.
Thanks anyway.
KR
Reda
just a note on this. I have had a jabra bt205 working with a QStarz BT-800 gps, it works ok BUT when i changed from the jabra to a stereo headset it workd ok too but only on the crap audio quality. I installed the cab file for A2DP support. now i have really good audio but as soon as i try to connect the gps the audio goes all choppy and eventualy cuts out.
It is of my limited opinion that you cant run A2DP and a bluetooth GPS because of the bandwidth (data transfer) available. Ive yet to see if i can get tomtom running with the wired gps and A2DP quality headset.
Think ill be goin back to wired headset for on the bike so i can have music, tomtom and calls... just need to find someone on here who has got a voice dial prog to run from the green call button on the wired headset.
GPS and BT Headset on XDA II
Anton.Valleyman said:
Does anyone else have this headset and an xda2i? I've posted about this before but got absolutely no feedback whatsoever. Could anyone tell me if they're using a clip style headset (not the ones that hook round your ear) with the 2i...how much it cost and what make etc. I may have to bite the bullet, sell the o2 headset and buy another one.
Cheers
Anthony
Click to expand...
Click to collapse
I use the MS BT stack with my Blue Ant BT earpiece and the Broadcom BT stack with a BTGPS74R receiver (aka Holox BT-321). They both work well individually, but not together. Another post made the point about com port issues ... well yes, I use the Broadcom BT Manager for this purpose, but the XDA II does not pair with the Blue Ant, even with TomTom 6 OFF. It shows up but is not really paired correctly.
Perhaps there is a simple answer ... if so, I am sure someone will advise me.
I am interested in this http://www.parrot.biz/united_kingdom/products/index.php?id=ck3300 Does anybody have any experience using this device, how well does it work etc. ?
I plan on using it with O2 Mini S and possibly Tom Tom software what do you guys think?
I have a CK3300 and the similar CK3100 (no GPS) in my wife's car.
They work superbly with Sony Ericsson phones, less well with Motorolas and Nokias but a bit of a disaster with the XDA Mini-S. Doesn't auto connect, doesn't synch contacts properly, overwrites voice tags. There's a bunch of posts on the subject in the Parrot forum on their website. Rumours that there will be a software upgrade shortly which will address some issues.
I haven't got around to trying the GPS with TomTom on the XDA (as I can't get it to install!) but it worked fine with my previous PPC (an iPaq RX3715)
--
Dave
I have a CK3300 not had to meany problems on the GPS side but my xda 2s and my axd mini would not work with the handsfree bit.
My xda exec works fine on GPs and handsfree.
Very good bit of kit overall
Beside experience, I have a question to post here.
I have Parrot СК3300 for 2 years. As handsfree kit, it works perfectly with Sonyericsson K750i, 700i, Z800, P900. With Sonyericsson P900, it works perfectly as hands free kit and GPS module simultaneously.
However, after connecting my QTEK2020i (1.11.00 WWE, Radio 1.02.00, ExtROM 1.11.113 WWE dd 27of Jan 2005) I can use Parrot as GPS module only. Any attempts to use Parrot as kar kit leads only to loud clicks from speakers. So just for now, I use Parrot as hands-free for Sonyericsson K700i and as GPS module with QTEK simultaneously.
No way to fix it. I delete all Bluetooth devices, soft reset, ad only Parrot as hands-free, soft reset. No result.
Can you suggest me how to fix it.
Thanks in advance!
Hi,
I have a CK 3000 intsalled with Tom Tom and a third party BT GPS mouse. The Parrot works very well but it has to be paired as a Hands-free set and not as a headset. One small bug, though: I have to start TT first for the GPS to connect when getting back into the vehicle. After that I start the engine, which connects the CK3000 to my MDA II. If the CK is connected first, TT can't find the mouse.
I've been looking for a way to get the audio to be put through the the CK. I once found a piece of software that could do that on this site but inspite of hours of searching, I haven't been able to find it again. - HELP!
parrot car kit
I have a parrot CK3500 GPS car kit and it works well with TomTom Mobile 5 on my SPV E200 ,C500, C550 and has worked with TomTom Navigator 5 my M2000 as well. This is for Voice AND GPS simultaneously.
with earlier versions of TOMTOM i needed to rename the bluetooth connection from Parrot to TomTom Wireless GPS.
I have an XDA Mini S too which is on a data only tariff (so havent tried handsfree) but TomTom 5 works with it for GPS. They seem a little fiddly to set up, but once set up they are great.
I found i needed to use "AnyGPS Tweak" on all the smartphones to get it to connect initially
I had a CK3300 in another car and that worked exactly the same.
The only criticism is that the GPS voice instructions dont go through the speakers. However sometimes they do, and it seems to be if you start TomTom before you switch on the car ignition, the car kit thinks a call is in progress and relays the GPS through the speakers. It doesnt always work, but sometimes its a bit of a shock to get Jane bellowing through the speaker!!
The downside is that if you take a voice call over the car kit, it seems to re-set and the GPS voice then reverts back to the phone speaker.
I have emailed Parrot about this and have not had a reply as yet.
Re: parrot car kit
shadowman said:
I found i needed to use "AnyGPS Tweak" on all the smartphones to get it to connect initially
I had a CK3300 in another car and that worked exactly the same.
Click to expand...
Click to collapse
Thanks for your reply.
As far as I understand, I can't solve problem with incoming - outcoming telephone calls by some "secret' QTEK settings.
Therefore, I'll try to find "Any Bluetooth Tweak" program to fix it.
Can you suggest any "Tweak" software?
Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans
If your car kit supports the A2DP profile for Audio over Bluetooth and you select the option to use it all the audio from TomTom will be via the car kit, check what your car kit is capable of supporting - Mike
vriesfde said:
Having installed TOMTOM6 on my HTC-3300 (t-Mob branded) I am looking for a way to route TOMTOM traffic messages thru my bluetooth carkit.
Obviously the phone calls go through fine, but afaik all the pda apps. sounds only run thru the mda's speaker.
Does anyone know a workaround or reg. tweak to do this?, I can't immagine I am the only one who would be looking for such functionality.....unless everybody else uses the gps function only 4 walking
Help much appreciated,
Frans
Click to expand...
Click to collapse
I'm using btaudio
greetz
Thanks for the tips!
My Nokia carkit does not support A2DP, it's the old CK-7W type....
I will try the above attached btaudio once more. Previous attempts using this program were not succesful, I believe the bt hardware of the artemis was not recognized.
I remember that on my IPAQ 5550 I changed a registry setting, enabling audio over BT, but I could not find such an entry in the Artemis reg.
Keep you posted on progress, and thanks sofar!
Succes!
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!
Hi guys,
I'm a newbie here, and was pointed to your excellent forum from one of the Mods over at pocketgpsworld.com.
I am running copilot 6 on an O2-registered xda Orbit, using a scala rider headset, on my motorbike, and i need to install btaudio.cab to mt xda in order for the insturctions to be relayed to my earpiece. My question is this - whereabouts to do i need to upload the file to on my xda (obviously somewhere in the copilot files, but i'm not sure where!!) and do i need to unpack it first?
Any help or tips gratefully recieved!!
Welsh Biker
No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.
vriesfde said:
Just tried btaudio, attached by hotatomic, and it works!!!!
Haven't tried what happens if I get an incoming call yet, but the sound for TT6 is much better using the Nokia handsfree.
Thanks!!!
Click to expand...
Click to collapse
Graag gedaan
Your welcome and when a call comes in it work ok
Gajet said:
No transfer the cab file directly to the orbit, (storage card is usually the best place to put them).
Then in file explorer, double click the .cab file to run it and it will install the application.
It's a separate application to Copilot.
Click to expand...
Click to collapse
That's brilliant, many thanks. I did as you said, and it is now working perfectly.
Once again, many thanks indeed
Welsh Biker
i have a orbit and i installed the btaudio cab but unfortunately it doesnt work for me. do i need to change any other setting for it to work properly? i am using a motorola hs350 headset. i am trying to use it to listen to music on my headset instead of the internal speaker. i tested tomtom6 with it and that is still being heard on the speaker and not the headset. thanks
Connect the headset to the Artemis first, then run BTAudio, switch to "on" and then minimize don't exit the program.
Have you got software that closes apps by pressing the x button or something, so that you keep switching the app off when activating tomtom etc.
how silly of me, checked settings menu, connections menu everything except the program menu!!!
Thanks a lot mate
Hi,
I seem to be having the same problem as some of the other guys. The Bt software is installed on my Orbit, I pair the phone with my car then switch the software on. At this stage the TomTom voice stops coming from the phone but doesn't come through the handfree either. If I switch the software off again the sound returns to the phone.
Is this being caused by the format of the handfree kit in my car as mentioned on the first page of this post?? How would I positively confirm the format of my handsfree kit?
Cheers
Rob.
i try to install and it works, but when i turn on audio my radio goes in mute, is possible to send the sound only when tomtom talk?
Hi all
I also need help with audio features. Is there an app that will send all audio through the head phone socket (connected to autocom on motorbike) and phone calls through bluetooth have tryed the app in this tread but it wont split it only redirects all audio?
PS sorry for the high jack of your thread just seemed a good place to ask this.
I had with wm5 a tool (i dont know how its called anymore) The tool routes all audio from the hermes to the bluetooth handsfree kit.
Now with wm6 (shadow) i cant get it to work anymore...
What i want is to have all the audio (Tomtom navigator, ringtone, sms tone) through bluetooth to the carkit.
i did installed a shareware apps... calles blueconnect but it always send a signal to my carkit it mutes my radio all the time!
Can someone help me please? I have already search the forum... but i cant get it to work...
yea it was a bluetooth mono through cab ..with a toggle to on or off..im looking for it also.
http://forum.xda-developers.com/showthread.php?t=266722
Searching is FUN!!!
not when ur blind
Doesnt work wel!!
I can select audio2blue then my car radio stops playing because the phone is putting a hish over the line. But worse audio from tomtom still coming over the phone speaker!
Anyone a solution!
Hi,
I have the following problem:
I am using XDA Orbit 2 and a car-radio Maqma MQ-106BT. This radio offers Bluetooth-connection to my XDA. It supports the BT-headset (A2DP) and the handsfree profiles.
After pairing the car-radio is shown with both active profiles in the settings-screen of the XDA.
I want the car-radio to play the radio program and to give the TomTom-voice using the car-speakers. The system works very well for the phonefunktion. But if I start TomTom the radio sound stops and only the voice of TomTom is to be heard but nothing between the TomTom comments. It seems, as if TomTom uses the BT-headset Profile and thus the radio is always waiting for sound from the XDA.
Are there XDA-settings which would help me or is there a possibility to force TomTom to use the handsfree profile, thus only muting the radio if there are comments from the navigation?
I hope here are some experts who are able to help me!
Best regards from Luebeck
Micha
Hi,
I can't believe it: Not even one answer?
Is it really such a special task? I have thought that here in this forum there are only XDA-specialists???
Please, if there is someone who has an idea, please help!!!
Regards
Micha
Bump, I have a similar question in the Athena forum. Best guess I have is to mess with the registry to force the tomtom commands to not go through A2DP, but through HCP (phone signal) - that way priority is assured, but you may have to physically hang up the signal to get back to radio. At least the signal would start automatically....
As far as i know to allow the radio to be played in between tomtom voice commands you would need a fixed wired connection and also a car radio system that allows line in input to be switched on and off. The problem isnt the PDA the problem is the radio system in the car.
As far as i know to allow the radio to be played in between tomtom voice commands you would need a fixed wired connection and also a car radio system that allows line in input to be switched on and off. The problem isnt the PDA the problem is the radio system in the car.
i have the same issue with the tytn2, i cant get my tomtom sound over my radio.
I'd appreciate it if anyone could help!
fwiw, I am still searching the forum for a solution. I have found some old bluetooth posts, that may hold the key:
http://forum.xda-developers.com/showthread.php?t=281977
in particular, message #2 of thread, concerning BTAudioNav hack:
http://forum.xda-developers.com/showpost.php?p=1046077&postcount=2
Some of this info is dated, so I haven't tried anything yet, and as the posts indicate, it takes 2 to tango. The WM6 device may be doing everything right, but the equipment you are pairing to may not be able to be configured correctly....
Update, BTAudioNav is not working, I assume that it is for PocketPC and I am running WM6
?!? Tomtom commands
[email protected]
I have the same problem.
Phone: HTC tytn2
Bury Wired Handfree
Perfect Sound Quality for Calls but: No system Sound, no TomTom Sound.
Yesterday i drive on the Highway, Tomtom was on and a call was incoming but the tytn2 was rebooting by him self .... AND NOW IT WORKS !
I hear all tomtom commands! I don't no why but it works!!!
Update, it seems that tomtom goes over the a2dp signal and not the handsfree profile.
If it was handsfree profile, it would cut into the car stereo music. A2dp doesn't have priority though with most car stereos.
Had I known this, I wouldn't of purchased tomtom....