Hi there I'am new here.... seached the forum and google a lot but didn't find an answer...
Just flashed from XDALive 2.0 to Black 2.0, radio 1.38.00.10 and HardSPL v6 with help of the manual of mrvanx.
My problem with the rom of XDALive 2.0 was that TomTom 6 keep hanging serveral time. The headset (bluetooth build in CAR, peugeot 207) was working perfectly. After the upgrade to Black 2.0 the TomTom problem was solved , it works perfectly now. The only what came up was the bluetooth headset probleem. The connection is ok but I don't hear any sound??
Flashed back radio ROM to 1.35 no results...
Found something interesting...
When its not connect with the carkit, turn on bluetooth, dail a numbers and turn on the Speaker, it will eventually connect to the carkit automaticly (and I got sound thourgh the carkit!
When searching for bluetooth devices it will find the headset and the carkit goes into 'calling mode'. When dailing a contact directly after that the carkit will work. But the next try it will mute the radio but doesn't give any sound on the carkit.
When allready connected with bluetooth on the carkit it wont give any sound thourgh it.... strange.. Tried serveral other ROMS but they are giving me the same problem...
Widcomm BT Stack (http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72) also tried, didn't help... anyone some suggestions?
PS.: My old nokia still works, it can't be the carkit..
Question for you. after you setup your carkit do you go into the bluetooth and set it to your handsfree device. There seams to be a few changes to the way WM6 chooses the handsfree device if you have several set up.
I have to change in WM6 bluetooth which headset I am using when I switch between the 3 headset I have. I have to go to Start\Settings\Connections\Bluetooth Click/Hold on my headset that I want to make active - you will get a Menu wit Edit/Delete/Set as Hands-free/Set as Wireless Stereo (last should be grayed out if it doesn't support Strereo)
Choose Set as Hands-free
After doing this my headset works fine. Try it and see if it works for you.
jcb_home said:
Question for you. after you setup your carkit do you go into the bluetooth and set it to your handsfree device. There seams to be a few changes to the way WM6 chooses the handsfree device if you have several set up.
I have to change in WM6 bluetooth which headset I am using when I switch between the 3 headset I have. I have to go to Start\Settings\Connections\Bluetooth Click/Hold on my headset that I want to make active - you will get a Menu wit Edit/Delete/Set as Hands-free/Set as Wireless Stereo (last should be grayed out if it doesn't support Strereo)
Choose Set as Hands-free
After doing this my headset works fine. Try it and see if it works for you.
Click to expand...
Click to collapse
When searching for a new bluetooth device WM6 sees a headset and the connection is successful. The 'Set has headset' is availible and is set. The option Wireless Stereo isn't support I think, its not availible as an option.
When calling you can turn on/off your headset back to the phone. That works but there is still no sound on the headset.
balck 2.0 does have issues. i also have same with motorola hs850.
only just found out. havent fixed.
bt connects as phone pad shows it.
headset bleeps on connect call and disconnect call. but no sound is sent or received.
always set to headset though not hands free.
will have to test further but definitely an issue. i didnt ask jj out of respect for his withdrawl of support.
I don't think it a problem with Black 2.0. Too many people say it works no problem.
I'm on black and all three of my head sets work like a charm. I have 2 Motos an H810 and a H700 and an Plantronics 510. I also have been able to use internet sharing, BT file transfer, and BT sync with Black 2.0
But it could be an incompatability between the WM6 M$ BT stack and your hands free kits.
Test your phones with another BT device and see what you get.
Same problem with HS850
simon_darley said:
balck 2.0 does have issues. i also have same with motorola hs850.
only just found out. havent fixed.
bt connects as phone pad shows it.
headset bleeps on connect call and disconnect call. but no sound is sent or received.
always set to headset though not hands free.
will have to test further but definitely an issue. i didnt ask jj out of respect for his withdrawl of support.
Click to expand...
Click to collapse
I have exactly the same problem, and I didn't solved yet....but I've found this bypass:
When the phone rings I answer with the bluetooth handset and receive the beeb on connect call.....then I close the BT headset and as soon as I re-open it, I have the headset working.....I have to do this for every incoming or outgoing call.
My BT headset was working well with the black 1.2.
This is the only issue I've found in the black 2.0.....I think is the most stable and fast rom.
Bye prengo.
jcb_home said:
I don't think it a problem with Black 2.0. Too many people say it works no problem.
I'm on black and all three of my head sets work like a charm. I have 2 Motos an H810 and a H700 and an Plantronics 510. I also have been able to use internet sharing, BT file transfer, and BT sync with Black 2.0
But it could be an incompatability between the WM6 M$ BT stack and your hands free kits.
Test your phones with another BT device and see what you get.
Click to expand...
Click to collapse
My other Bluetooth devices are working fine. My bluetooth GPS receiver works just fine with TomTom... no issues there.
Just flashed back to XDA-Live (v0.20.1) and the headset works without any problem.
Only thing now is Tom Tom 6 hangs directly after the start of it. Anyone familiar with this issue?
thx
PS.: what is the differance between the Black 2.0 and XDA-Live (v0.20.1) ? other bluetooth driver versions besides the os version? Maybe there is a way to combine..?
A common thread seems to be the HS850
I have the exact same problem with my HS850. I get the call connect beeps but no sounds come through. The issue exists if the headset is connected when the call is made. If I make the call, then flip the boom and turn the headset on, then I get sounds no problem.
I had this issue with both LVSW 4-08 and Black 2.0. I eventually went back to XDA Live 0.20.1 and my BT issues all went away.
cruzer said:
PS.: what is the differance between the Black 2.0 and XDA-Live (v0.20.1) ? other bluetooth driver versions besides the os version? Maybe there is a way to combine..?
Click to expand...
Click to collapse
WMXL .20 is based on a beta WM6 build and Black 2.0 is built on an RTM build (non-beta)
With Moto HS850 too.
edwinyuen said:
I have the exact same problem with my HS850. I get the call connect beeps but no sounds come through. The issue exists if the headset is connected when the call is made. If I make the call, then flip the boom and turn the headset on, then I get sounds no problem.
I had this issue with both LVSW 4-08 and Black 2.0. I eventually went back to XDA Live 0.20.1 and my BT issues all went away.
Click to expand...
Click to collapse
Exactly the same here with HS850. Tried everything after 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10.exe but kept getting no sound.
I have experienced the same problem with my 407 hands free system. My Orange SPV C600 works without a problem, it does not show signal strength and battery level though. Using my M3100 with any of the following listed below works perfectly:
HTC English QTEK_001 2.11.255.1 03/07/07 2.11.255.102 1.38.00.10 32.71.7020.12H OS 15673.3.3.1 AKU 3.3.1
Cingular English CWS__001 2.15.502.3 04/09/07 ?? 1.40.30.00 32.73.7020.16H OS 15706.3.5.2 AKU 3.5.2
XDA-Live (v0.20.1) English 3.22.110.1 01/04/07 None None 5.1.195 (WM6) OS 17217.6.0.0
I have found all the above roms work perfectly with my TomTom 6.030 software. I am currently using Black Version 2, I have also used LVSW roms and found the same issue with any running the OS 17736.0.2.0
mike6502 said:
I have experienced the same problem with my 407 hands free system. My Orange SPV C600 works without a problem, it does not show signal strength and battery level though. Using my M3100 with any of the following listed below works perfectly:
HTC English QTEK_001 2.11.255.1 03/07/07 2.11.255.102 1.38.00.10 32.71.7020.12H OS 15673.3.3.1 AKU 3.3.1
Cingular English CWS__001 2.15.502.3 04/09/07 ?? 1.40.30.00 32.73.7020.16H OS 15706.3.5.2 AKU 3.5.2
XDA-Live (v0.20.1) English 3.22.110.1 01/04/07 None None 5.1.195 (WM6) OS 17217.6.0.0
I have found all the above roms work perfectly with my TomTom 6.030 software. I am currently using Black Version 2, I have also used LVSW roms and found the same issue with any running the OS 17736.0.2.0
Click to expand...
Click to collapse
It's great that you tracked this down so specifically. I guess this means for those of us with these issues, we have to avoid newer WM6 builds until someone looks into this.
idee2000 said:
Exactly the same here with HS850. Tried everything after 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10.exe but kept getting no sound.
Click to expand...
Click to collapse
Can't just be the ROM as my HS850 works perfectly with Black Pro 2.0
rabdo said:
Can't just be the ROM as my HS850 works perfectly with Black Pro 2.0
Click to expand...
Click to collapse
I have the same problem as the others with my HS850. No audio if the headset is on when a call is made or received but if I close the boom and re-open it, viola it works again.
I did have a problem with HTweakC where I changed the A2DP setting to on and now no matter what I do I can't get it off again. I might re-flash and see if that helps.
I don't know if it matters but I have MS voice command on my phone, even though the MSVC16BThack doesn't work anymore. (my phone is an 8525) Hope someone can figure this out, I really like the speed and stability of this ROM but if I can't get my BT to work I'm going to have to downgrade.
AdamsJourney said:
I have the same problem as the others with my HS850. No audio if the headset is on when a call is made or received but if I close the boom and re-open it, viola it works again.
I did have a problem with HTweakC where I changed the A2DP setting to on and now no matter what I do I can't get it off again. I might re-flash and see if that helps.
I don't know if it matters but I have MS voice command on my phone, even though the MSVC16BThack doesn't work anymore. (my phone is an 8525) Hope someone can figure this out, I really like the speed and stability of this ROM but if I can't get my BT to work I'm going to have to downgrade.
Click to expand...
Click to collapse
I am using Cyberon Voice Commander v2 - maybe that is why it is working for me
Hi,
I am using radio rom 1.40.30 and Black 2.0.
I am using H700 BT headset
the problem i face are opposite from you all.
If i am already talking halfway and i flip the boom to continue talking with the BT headset...it won't work.
if i receive a call and I flip the boom while the phone rings, it is ok and i can even press the button on the h700 to answer the call.
Radio 1.40.30 seems to connect with the BT headset much faster.
last time when i was using my previous default factory rom, when i flip the boom while the phone is ringing, it will take ages to connect
why not u guys try radio rom 1.40.30 also
rabdo said:
I am using Cyberon Voice Commander v2 - maybe that is why it is working for me
Click to expand...
Click to collapse
I did a hard reset, paired the headset, and tried it right away and still had the issue so it's not VC 1.6. It has to be related to the ROM as I have the same Radio ROM for all three OS images and only the XDA Live ROM works correctly.
edwinyuen said:
I did a hard reset, paired the headset, and tried it right away and still had the issue so it's not VC 1.6. It has to be related to the ROM as I have the same Radio ROM for all three OS images and only the XDA Live ROM works correctly.
Click to expand...
Click to collapse
Sorry, what I meant is that perhaps Cyberon Voice Commander is 'fixing' the issue on my system, rather than saying MS VC 1.6 was causing the problem. Next time I hard reset I will test my headset BEFORE installing cyberon software
Ok I'm still having this problem and this is what I have tried so far:
I downgraded to XDALive v0.10 and my BT worked, but no WiFi
So I upgraded to HardSPL v6, then installed the 1.40.30.00 Radio rom, and then went back to Cingular Black 2.0, WiFi back but no BT unless headset is activated after call is initiated.
Installed Cyberon Voice Commander, didn't effect anything, still no BT
Removed Cyberon Voice Commander and re-installed MS VC 1.6 installed all the hacks and still no audio in the headset.
So it looks like it is something in the ROM that is killing the BT functionality. Maybe because the XDALive is based on a beta WM6 and the Black is based on a full version?
Related
Hello
I have a Seat Leon with preinstalled bluetooth in-car.
I used to have dutty v1 installed on my hermes and everything was great!
When I installed Black 2.5 then I was able to pair the phone with the car but after a minute the connection is dropped.
same problem happens with dutty v2 and the newest lvsw
you know what is wrong with the new version? newest bluetooth?
any ideas?
i was going to start o similar topic... but i've seen yours... the reason... happy with wm6 and the car kit
so.. i have o parrot 3400LS-GPS car kit... and when i conected the phone to it for the first time it showed the signal strength and battery state... with wm5 i had nothing.... and the coolest thing is that i have also carrier's name... at first it was eandomly shown... but i think i figured it out... if it is on 3g it does not display the carrier's name... but on gsm it does... BUT if i disable the longnameprefix in regedit it also shows the carrier on 3g.. but on this i still got to test....
anyway no BT drops...
spv m3100
radio 1.41.
hardspl 2.10 oli
dutty v2 premium
Same on Audi A6, Black 2.5 (and latest LVSW) drop BT connection. Sucks.
i guess microsoft broke some compatability with this os build in a few weeks there might be a new os build....heh
Same issue here
working with an older version of LSVW (can't recall which one) and a 2006 Audi S4 -- pairs fine, shows signal strenght and other details not shown with WM 5.0, but drops and reconnects randomly. Very irritating. I don't use bluetooth anymore in my car -- a tremendous shame.
dutty said:
i guess microsoft broke some compatability with this os build in a few weeks there might be a new os build....heh
Click to expand...
Click to collapse
dutty do u think that if I downgrade to v1 of your rom the problem will be fixed?
MegaHz said:
Hello
I have a Seat Leon with preinstalled bluetooth in-car.
I used to have dutty v1 installed on my hermes and everything was great!
When I installed Black 2.5 then I was able to pair the phone with the car but after a minute the connection is dropped.
same problem happens with dutty v2 and the newest lvsw
you know what is wrong with the new version? newest bluetooth?
Click to expand...
Click to collapse
Hi, I don't know if this will solve your problem but here goes anyway. When I first got my phone (Orange SPV M3100), I could not connect to installed BT system in my Audi A4. I understand from what I have read that this is due to a slight difference in BT specification used by WM to that used by mobile phone manufactures. I had similar problems as you describe above - all fixed since I installed software from JetWare (use google to find). Hope this helps.
hdd123
hdd123 said:
Hi, I don't know if this will solve your problem but here goes anyway. When I first got my phone (Orange SPV M3100), I could not connect to installed BT system in my Audi A4. I understand from what I have read that this is due to a slight difference in BT specification used by WM to that used by mobile phone manufactures. I had similar problems as you describe above - all fixed since I installed software from JetWare (use google to find). Hope this helps.
hdd123
Click to expand...
Click to collapse
hrmm, I'll try that too but my question is that my phone used to work just fine, now with the latest rom the problems with bluetooth started, that's what I am pointing out.
Hi all.
I've a Seat Leon too, with bt integrated.
Since i upgraded to first WM6, i have no problems with hands free, but i must get the PDA on. If i put PDA off, BT starts to disconnects and reconnects, and finally BT goes off.
With all WM5 i've tested, the BT disconnects and reconnects every time with the PDA on.
Think there is an issue with the way the handsfree get info from the phone, cause normal phone works without this issue.
Regards.
Im also using Pro 2.5 and have noticed that my BT for my Handsfree car kit is playing up. I can connect and it works but when I leave the car and come back I need to shut down and then restart Bluetooth to reconnect. Bit of a pain atm.
try the widcomm stack
http://forum.xda-developers.com/showpost.php?p=1234724&postcount=507
Also having problems, Parrot Rhythm 'n Blue, it droppes during calls and reconnects after a minute (not always).
I already use Jetware, so I fear that doesn't do the trick. According to the reactions in this thread this really seems to be a problem...
jasjamming said:
try the widcomm stack
http://forum.xda-developers.com/showpost.php?p=1234724&postcount=507
Click to expand...
Click to collapse
Ok thanx, I'll try that and report back...
It's the BT implementation in the phone (either HTC or Microsoft), other phones work fine. Anyho: for me the previous LVSW (03-26) works fine and since I don't need the other 'stuff', I'm using that release.
My $0.02
nukenine said:
It's the BT implementation in the phone (either HTC or Microsoft), other phones work fine. Anyho: for me the previous LVSW (03-26) works fine and since I don't need the other 'stuff', I'm using that release.
My $0.02
Click to expand...
Click to collapse
if dutty is not able to release the v2 with the old bluetooth stack I will downgrade to that version too...
I will also try the jetware tonight and let u know.
thanks
MegaHz said:
if dutty is not able to release the v2 with the old bluetooth stack I will downgrade to that version too...
I will also try the jetware tonight and let u know.
thanks
Click to expand...
Click to collapse
as said: I use the jetware software already and got the same problems... not always, but frequently.
I'm currently using Black 2.5 w/an '07 Infiniti FX and have zero dropout issues. I love it actually, I got in my car this morning and it reconnected automatically when I got a phone call, no problem
MegaHz said:
if dutty is not able to release the v2 with the old bluetooth stack I will downgrade to that version too...
I will also try the jetware tonight and let u know.
Click to expand...
Click to collapse
guys, finally the jetware did the job, the bluetooth stopped on keep disconnecting, let's hope that MS will fix the problem on the next release.
Hi all, another SEAT Leon driver with bluetooth handsfree problems here
My Vodafone v1605 suffered the dropout problem when it was on the stock Vodafone ROM.
I used the WM Black 2.0 ROM for about a day before the 2.5 ROM came out and didn't suffer the problem.
Since going to Black 2.5 I have suffered the problem intermittently. When the phone is running on battery it frequently disconnects/reconnects. However it appears to be pretty stable when on charge in the Brodit powered mount. I would guess that the major difference is that when on charge the phone doesn't go into standby mode.
I am tempted to go back to 2.0 and test for a while longer, especially as my device code has been updated with 2.5 so TomTom is not currently activated
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
which WM6 ROM are you using?
I had this problem with my Audi A4 car phone. The ROM versions using build Build 17745.0.2.3 were not good for that. Now, I'm using the Black Majik ROM and that works like a dream for the BT connections.
walshieau said:
which WM6 ROM are you using?
Click to expand...
Click to collapse
I have Cingular HTC 8525 [HERM100]
ROM Version: 3.30.2.1
ROM Date: 04/17/07
Radio version: 1.41.00.10
Protocol Version: 32.74.7020.18H
viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
Did you manage to solve this? Is so how?
Thanks
Msuk
i started having the same problems but i noticed it after i installed the voice command.. the rom that i use is the gm360 gold. the problem ive got was whenever i was in a phone call using my blutooth and i received a text message it would deactivate my headset. if ur having somewhat of the same problem try disabling ur voice command software...
Multiple AT&T/HTC WM6 ROMs?
My 8525 with the WM6 ROM can no longer route the audio to the BT headset (a Moto HS850 - but this is irrelevant, I suspect).
Basic BT headset usage was fine with WM5 (excepting the known issues with VoiceCommand).
I thought that perhaps the issue was related to the various little registry tweaks and sw patches. However, I had to do a reflash (for other reasons) and currently have just the default WM6, no registry tweaks, no BT sw patches, and MS VoiceCommand 1.6 installed (but set to NOT use the BT headset).
Pairing works fine. So does activation recognition (i.e. the little headset appears in the notification area when I open the boom on the headset and I can hear the background establishment of the BT channel). But audio (dialing tones and Connected call audio) do not reach the headset. The audio also doesn't go to the phone's speaker.
So, are the official ROM updates that repair this? Or, is the cost of going to WM6 the abandonment of BT headsets?
By the way, VoiceCommand 1.6 works fine--if I tell it to stay away from the BT headset.
Pays WM6 Roms
I had the same BT disconnecting problems with my original german Vodafone WM5 and also still have them with Pays WM6 ROMs (2.02 - 2.15) in my Audi A6 MMI.
With the original german HTC WM6 ROM BT worked very well.
Everything else on Pays ROMs is really great. He´s doing great jobs.
Any idea?
I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!
ai6908 said:
I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!
Click to expand...
Click to collapse
Come On, experts on the XDA portal, no solution?? noooo way!!??
My friend had the same issue with an tytn2 and last schap's rom in french language.
After an hard reset i get BT work fine with his OPEL.
But before i made lot of test desinstalling soft check registery key with no result. I still do know why BT was disconecting woth no reason.
Cheers.
Audi Bluetooth hands free
I had the same problems in wm6 with some roms.
I use the official HTC TyTn wm6 with excelents results, also Schaps 4.31 work very good (No disconection at all).
Now I am using Pay WWE 4.30 with many disconections.
BTW I have the audi TT bluetooth option.
On my 8525 Hermes I use the latest Pays Rom and it was disconnecting all the time (Parrot BT) - BUT then I decided to TURN OFF THE WAN and it improved greatly. Other thing I noticed is that the Hermes has to be in DIRECT LINE OF SITE of the BT device at all times or it is erratic.
BT
It seems there are differences in the WM6 versions. As said earlier in this thread for me original HTC and Schaps WM6 ROM versions are running without any BT disconnections.
Tried several WM6.1 versions now and every single one is working fine with my Audi MMI.
Similar problems handing BT control between applications
Hi all, I've been experiencing similar problems since changing ROMs. Originally with Schaps 3.60a I was able to make a call whilst listening to music all using my BT headphones. The Call would pause the music & resume afterward. It worked great! However since changing to Schaps 4.0, 4.2 & now CRC's PHKv12r9, I've never had the same. On a couple of rare occasions it has all worked fine but more often the bluetooth has to be turned off & back on again to reconnect. it seems to relate to what other programs are also running. I suspect there must be registry settings which control the bluetooth operational modes which are brought into play by the various programs running.
Hi
I have a motoroal bluetooth HS 850 headset and it just does not work with any of the Offical Rom's used to work great with the cooked 1es. it pairs fine also give me the beep of connected and disconnect but no voice. the jabra ones work fine. any suggestions
using the official HTC Tytn ROM
pyk said:
Hi
I have a motoroal bluetooth HS 850 headset and it just does not work with any of the Offical Rom's used to work great with the cooked 1es. it pairs fine also give me the beep of connected and disconnect but no voice. the jabra ones work fine. any suggestions
using the official HTC Tytn ROM
Click to expand...
Click to collapse
on the "add devices" page, with the headset shown already attached, if you tap and hold your device's name, select "headset".
I have the same problem and up to now I didn't solve it, I have also an HS810 and it works perfectly.
Bye prengo
Same problem. It worked for me with earlier WM6 releases, but with the latest version, I've the same problem. the only solution I think is to buy a new one!
Same Problem Here. any body found any solution?
First a BIG thanks to all for the fantastic work being done on this site. I too have the same problem with my HS850 connecting fine but having no sound. Has anyone been able to solve this HS850 problem? I've tried for 3 days without success
mine works
hs850 works fine on vp3g 3.0. Pair and go, no hassle.
Atmis said:
Same problem. It worked for me with earlier WM6 releases, but with the latest version, I've the same problem. the only solution I think is to buy a new one!
Click to expand...
Click to collapse
I am using Dopod M700 with WM5. Working well with Motorola HS850. Then I flashed to Artemis Touch 2.1 WM6. The problem is when my call comes in, after I pressed on the answer button, no sound. Just a connected/disconnected sound. Doesn't even work with a2dp also.
Mines working with vp3G 3.62. Just make sure you check "handset" when u choose services.
I dont know what dialer you're using, but at least with the Kaiser dialer, a little headset icon appears in the dialer if you have it paired and the boom out. Might check that too.
After upgrade to the official HTC WM6 ROM (spanish version) my integrated bluetooth hansdfree CAR-KIT doesn't work anymore (with WM5 the system works perfectly).
The car is a new CITROËN C4 Picasso, but i think this problem must involve any new PSA Group Car (CITROËN, PEUGEOT...) that mount the same kit.
I can pair the CITROËN hansfree with the TyTN, and both connects (i can see the operator name, the battery level, and the signal level, that WM5 stack doesn't show) but when i try to call, or i receive a call, there is no sound throw the hansfree system.
I also have tried the Jetware bt extension with no succes.
At now i had to downgrade to WM5 because this problem (i need the handsfree working).
The cuestion is...
Is it possible for a ROM MASTER to extract a previous bluetooth working TyTN stack to overwrite the stack that comes with official WM6?... (the WM5 or any working WM6 working stack).
Thanks
The same problem here with the same car; also the Artemis on WM6 (I tried several roms) has no sound.
Downgraded to WM5, and it's all working again.
Not yet tried to get an update for the car; maybe there is also a solution.
I have the same problem with Motorola HF-850 car kit. I'm about to downgrade too. This sux.
Same issue here with Nissan Sentra 2008.
I can dial and receive calls but the audio works about 30% or the time. It is hit or miss.
Same here in a 2007 UK CITROËN C4 (5 door hatchback) with factory fitted Bluetooth car kit, using an Orange M3100 with the Schap's WM6 Pro 3.60a ROM. Looks like I'm going back to the Orange WM5 ROM as this is a deal breaker for me. Very disappointing.
try this
I had similair problems a few pretty good solutions:
-jetware search google i use this one
-Solution:2
Change the COD (Class of Device) from a PDA device to a smartphone device.
This can be done this way:
1. First make sure you've got a backup, or remember all settings you change in the registry.
2. Edit with a registry editor the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS\COD
By default my vario II does have the value: 1048852 (decimal)
Change this to: 5374476 (decimal).
3. Soft restart your device
4. Voila! Your device now identifies itself as a smartphone
see this thread
http://forum.xda-developers.com/showthread.php?t=290871
Thanks!
I tried the Jetware solution: no luck.
I also tried the COD trick: very strange result, I was able to make just 1 (one) call and other calls were again not possible (no sound).
Maybe there is a solution in updating the software of the handsfree set in the car. I will ask my Citroen agent to do this, if possible.
I will post the results.
I haven't tried the COD trick, but I don't think this will work. It's not a case of my car 'ignoring' my M3100... it pairs OK, and the car's display shows an incoming call, allows me to pick it up, etc, but no sound comes out of the speakers and the other party doesn't hear my voice. It's like the car is receiving the data stream to tell it what's happening on the call, but not the sound.
I don't have any of these problems with WM5, I don't even need to use the JetWare solution.
same problem with Peugeot 407
Same problem here with Peugeot 407
What I found is that if I start a call without Bluetooth and start Bluetooth during the caal, the sound works perfectly. Every next call has the same problem as before though.
TyTN; WM6 Schap's 3.60a;Radio 1.47.00.10
Hi.
I am with Motorola's HF-850 car kit and I get the sound only after 8-10 full seconds from answering. It is so sad that I have to say "wait....wait" every time I answer a call....
There is a post on this forum that suggests someones got it working with an Audi and the latest Black beta rom...
http://www.4winmobile.com/forums/hermes-black-rom-support/11291-black-x-beta-2-smash-trash-11.html
Anyone tried this?
This post also suggests that the newest Black roms may have fixed the issue
http://htc-devs.com/forum/index.php?topic=42.msg321;topicseen
Here's hoping!
That will not work on the Artemis
But I tried several WM6 roms, including the Black & Blue 4.1: no luck.
Looks like a real WM6 issue, as it's happening with several phone models.
UPDATE: No software update for the factory Citroen bluetooth handsfree according to the local dealer; so that's no solution
I have tried 5 of the latest roms yesterday including all the fixed mentioned in this forum. The best I got was with Sleuth rom where I get audio about 50% of the time. Answering with that rom results in a 5 seconds delay before audio connects causing me to yell "wait, wait, I am here ... "
I even tried a blootooth stack from Broadcomm but the result was not better.
Out of desperation as I bought this car specially for its built in bluetooth kit, I downgraded to Cingular Mobile 5 Rom version (2.15.502.3)
I am surprised and kind of thrilled to report that my 8525 and the car kit are working perfectly together and reliably.
There must be either a bug or a setting/configuration issue on the Mobile 6 bluetooth stack that caused this issue. I am unfortunately back to mobile 5 for the time being until this issue is resolved.
SPV m3100, CK3100 AND WM6
I have an Orange SPV M3100 in Spain with WM6 and i have the same problem. With WM5 and Jetware estension, i had to pair parrot and pda manually every time i got into my car, because they did not connect automatically (Blueetoth-->Devices-->Parrot CK3100-->FreeHand-->OK), but then it works well and i could receive and make phone calls.
But since I upgrade to WM6 i have to pair it manuaaly too, they connect, but it only works from time to time; most times, if i make a call it dials but i cannot speak and people does not hear me; if there is an incoming call, I see the number in the displsy but i can receive it.
Anybody with WM6 and Parrot Ck3100 works well?
I have the same problem with a Mio C520 SatNav. Its bluetooth handsfree works fine with WM5 but not WM6.
I also posted this on a thread on bluetooth headsets, http://forum.xda-developers.com/showthread.php?t=301636&page=6
I tried many different versions. So far with Sleuth's WM6, I had sound around 50% of the time. Similar to one of the previous posters.
Until there is a fix I will have to go back to WM5
I use a parrot car kit and it works fine. However, I noticed some new functionality on my lcd, like displaying battery and signal levels which was not available with the original WM5. That was available only with specific phones. Based on that I believe that a firmware update of your car kit could solve the problem. The issue is whether this is provided for you and if you will have to pay. Parrot offers them for free and you can upgrade via BT.
Does anyone have a clue why my Vario 2 will connect to my Car Bluetooth when using WM5 (either HTC version or T-Mobile) but when using WM6 it seems impossible to connect?
What happens is this:
When using WM6 I can connect my phone with my (Citroen) car bluetooth and I can scroll through my phonebook using the buttons on my steering wheel. It even confirms I'm using the car BT as a handsfree device.
But as soon as I start a conversation, the only thing I hear trough the sound system of the car is a loud "click" and then only noise.
And the phone is no longer using its own speaker too....
When using WM5 I don't have this problem.
I've tried many things, like the HTC version of WM6, the T-mobile version of WM6, I've tried the Schaps 4.30, I've tried different radio versions. Nothing works.
Anyone any clue?
Riotmanager said:
........I've tried different radio versions.....
Click to expand...
Click to collapse
The bluetooth stack has nothing to do with the radio image, theres no point in changing radio versions.
In the car stereo setup, is your device still listed? If it is....remove it. Then on your device in WM6....scan for the stereo.....if it is found pair with it and can you please reply with the services it offers in the paring dialogue on the Hermes.
I know the radio has nothing to do with the BT, but I was kind of desparate....
When I pair, the only service I can choose is the handsfree function.
Riotmanager said:
Does anyone have a clue why my Vario 2 will connect to my Car Bluetooth when using WM5 (either HTC version or T-Mobile) but when using WM6 it seems impossible to connect?
What happens is this:
When using WM6 I can connect my phone with my (Citroen) car bluetooth and I can scroll through my phonebook using the buttons on my steering wheel. It even confirms I'm using the car BT as a handsfree device.
But as soon as I start a conversation, the only thing I hear trough the sound system of the car is a loud "click" and then only noise.
And the phone is no longer using its own speaker too....
When using WM5 I don't have this problem.
I've tried many things, like the HTC version of WM6, the T-mobile version of WM6, I've tried the Schaps 4.30, I've tried different radio versions. Nothing works.
Anyone any clue?
Click to expand...
Click to collapse
Same issue than you, on a 407 peugeot, I get back on WM5, I work/phone in my car...
I like WM6 news fonctionnalities, I try some Schaps, some CRC, some Black, none were fonctionning...
If anybody has any ideas, I'm ready to try,
Rds,
Well just to update this thing, I have a jabra BT320s which NEVER showed up as wireless stereo, but on the latest pandora kitchen (big storage 3.62 version) it is detected as handsfree and stereo now. Perhaps try that ROM??