Develop Bugs

XDAIIi, Bluetooth Headset and GPS

Hi
I'm looking at purchasing an XDA IIi from O2, both to use as a PDA, phone and for SatNav. It's likely that I'll go with TomTom and I already have a Bluetooth GPS receiver.
I've already got an O2 blue headset that works with my SonyEricsson T610 and I'll also be wanting to use that whilst in the car.
I have some questions that I hope some of you might be able to answer...
Is it possible to use both a bluetooth headset and bluetooth GPS at the same time?
Does the XDA IIi support the O2 blue as the SE T610 does, i.e. I press the button and say the contact I want to call and then the phone (home, mobile etc).?
Thanks for any help!
GWG

Hi
I have the Jabra BT 200 headset and the Leadtek 9537 GPS unit. They both work fine at the same time on my Xda IIi.
I was checking the GPS using Pocket Streets (have not re-installed Tom Tom yet but I do not envisage a problem)
The BT setup seems better on the IIi, there wasn't any messing around with the COM port settings like there was with the Xda II.
If you mean the fonix VoiceDial software that comes with it, then yes, it does work that way.
On the whole, I am pleased with the IIi (I had the II for a year), the camera is flakey but I can live with that.

MarkySan...
Thanks for that... Looks like it'll do what I'm after
I might then have to become a regular on these forums!
Cheers
GWG

Be warned, if you mean the o2 CLIP blue headset (made by iTech), I also have it and have been unable to get it working. (Why oh why can I not have the old stack from the xda2 as that worked perfectly with headset profile)
At one point I was briefly able to get it installed as a handsfree device but it then stopped working. Before I got rid of my xda2 I tried re-pairing the devices and it worked great first time. Other BT headsets I had access to worked fine.
Does anyone else have this headset and an xda2i? I've posted about this before but got absolutely no feedback whatsoever. Could anyone tell me if they're using a clip style headset (not the ones that hook round your ear) with the 2i...how much it cost and what make etc. I may have to bite the bullet, sell the o2 headset and buy another one.
Cheers
Anthony

2 BT devices simultaneously on XDA II
This is an interesting problem. I've got an XDA II, a leadtek BT gps receiver and a nokia handsfree BT carkit, plus Tom Tom.
I haven't got them all working at once yet and have been told there is a problem getting the handsfree to work anyway.
This was from a so called reputable high st mobile phone chain (who also said that only one BT device could be connected at once).
Any help or advice appreciated....
David

Well, I got my XDA IIi and very nice it is too.. this is my first foray into the world of PDA so I've nothing to compare too, so I'm very pleased
I've twinned it with my O2 blue headset and it works fine.
Also got TomTom navigator and a bluetooth GPS (although you still need a cable for power across the dashboard! Doh!).
They both work together, although there does seem to be some strangeness when they're both on:
1. The GPS sometimes drifts off... although this is based on a 15 minute drive into Town only
2. When on a call, the GPS signal seems to go completely and TomTom doesn't know where I am!
I do have a question about WiFi and MMS if anyone could help...
I have a WLAN at home, whihc the XDA IIi seems to connect to fine. However, when I am connected to it, I cannot send or receive MMS messages.. I'm sure it's something to do with this 'Internet' or 'Work' stuff, but this is all rather confusing. Has anyone written an idiots guide to all these strange settings?
Thanks!

ive used it all week on calls and even had the voice through my jabra 250 gps stayed on all the time it was fine the only problem i had was i couldnt get gprs without a softreset

Alix, are you saying you got the Tom Tom voice directions through the Jabra?
If so, I'm off to get the i!

Firstly is this forum ONLY for developers?
Because you will quickly discover that I am not a developer but a confused user and I was hoping that I could get some advice here?
Anyway I have a Bluetooth headset and was considering getting TomTomGo but also wondered if the headset and a BT GPSr would work together.
Also does anyone know if we will ever get voice dialling working on MobilePPC? I had a brief discussion with someone at Fonix who said that "Microsoft does not expose the necessary functions to third party software developers like Fonix".

Actually, now I've been using it for a while, it seems the reason Tom Tom drifted was because of a loss of signal.
Using the BT headset and Tom Tom with the BT GPS together is fine.
What is annoying though is the fact that the Phone App pops up in front of Tom Tom and doesn't go away when the call is complete.
Also, when touching the button on the headset to open the connection with the phone, it doesn't automatically start the Voice dial, you still have to reach across and fumble about looking for the button on the side. Has anyone got any ideas if it's possible?
That being said, the voice dial works OK.. not brilliant, and the voice that tells me what it thinks I've said is rather disappointing.. I want to keep telling it to 'Please speak more clearly' !
And I too can hear the Tom Tom voice prompts through the BT headset when the conection is open, although I prefer not to.

See my note re what the Fonix guy said above.

aRGybaRGy said:
Well, I got my XDA IIi and very nice it is too.. this is my first foray into the world of PDA so I've nothing to compare too, so I'm very pleased
I've twinned it with my O2 blue headset and it works fine.
Also got TomTom navigator and a bluetooth GPS (although you still need a cable for power across the dashboard! Doh!).
They both work together, although there does seem to be some strangeness when they're both on:
1. The GPS sometimes drifts off... although this is based on a 15 minute drive into Town only
2. When on a call, the GPS signal seems to go completely and TomTom doesn't know where I am!
I do have a question about WiFi and MMS if anyone could help...
I have a WLAN at home, whihc the XDA IIi seems to connect to fine. However, when I am connected to it, I cannot send or receive MMS messages.. I'm sure it's something to do with this 'Internet' or 'Work' stuff, but this is all rather confusing. Has anyone written an idiots guide to all these strange settings?
Thanks!
Click to expand...
Click to collapse
You can ONLY connect to MMS via the O2 GPRS network. Since your WIFI is outside their network, and is somebody elses, they won't let you login to their servers to send. All the carriers work this way - it's how they charge!

Hi,
I have a XDAIIi, Nokia car kit and TomTom 3 bluetooth. I have been trying to connect my phone to the car kit using bluetooth. Unfortunately it will only connect for phone calls. Does anyone knows how to permanently connect the phone using a different profile, so that I can listen to music and voice instruction of my TomTom using the car audio system? Any help is appreciated. Thanks
Reda

Hi,
I have a XDAIIi, Nokia car kit and TomTom 3 bluetooth. I have been trying to connect my phone to the car kit using bluetooth. Unfortunately it will only connect for phone calls. Does anyone knows how to permanently connect the phone using a different profile, so that I can listen to music and voice instruction of my TomTom using the car audio system? Any help is appreciated. Thanks
Reda

All I can help you with is that using my Jabra I press the call end button on the headset and the sound for my Tom Tom and MP3s comes through the headset.
Hope this helps.

Thanks mindracing. Do you know what services/profile your jabra return when you enquire it?
KR,
Reda

It shows up as Hands Free connection to Jabra 250.
Status just shows Jabra 250/Audio Gateway.
If you know where else to look just ask.

Thanks mindracing. yesterday I tried every possible combination but it seems I cannot stream my music and Tomtom instruction to the car kit.
Thanks anyway.
KR
Reda

just a note on this. I have had a jabra bt205 working with a QStarz BT-800 gps, it works ok BUT when i changed from the jabra to a stereo headset it workd ok too but only on the crap audio quality. I installed the cab file for A2DP support. now i have really good audio but as soon as i try to connect the gps the audio goes all choppy and eventualy cuts out.
It is of my limited opinion that you cant run A2DP and a bluetooth GPS because of the bandwidth (data transfer) available. Ive yet to see if i can get tomtom running with the wired gps and A2DP quality headset.
Think ill be goin back to wired headset for on the bike so i can have music, tomtom and calls... just need to find someone on here who has got a voice dial prog to run from the green call button on the wired headset.

GPS and BT Headset on XDA II
Anton.Valleyman said:
Does anyone else have this headset and an xda2i? I've posted about this before but got absolutely no feedback whatsoever. Could anyone tell me if they're using a clip style headset (not the ones that hook round your ear) with the 2i...how much it cost and what make etc. I may have to bite the bullet, sell the o2 headset and buy another one.
Cheers
Anthony
Click to expand...
Click to collapse
I use the MS BT stack with my Blue Ant BT earpiece and the Broadcom BT stack with a BTGPS74R receiver (aka Holox BT-321). They both work well individually, but not together. Another post made the point about com port issues ... well yes, I use the Broadcom BT Manager for this purpose, but the XDA II does not pair with the Blue Ant, even with TomTom 6 OFF. It shows up but is not really paired correctly.
Perhaps there is a simple answer ... if so, I am sure someone will advise me.

Bluetooth issues with the HTC TYTN II

I recently purchased an AT&T Tilt (TYTN II phone) with Windows 6.1 Dutty Series... since my motorola KRZR took a dump on me....Quite an upgrade...I am trying to use the Motorola H700 Headset from my KRZR on to my HTC, I can get the headset located in the device menu but I cant get the HTC to pair up with the headset on a continual basis. I am also having an issue connecting to a Bluetooth GPS Antenna. I can locate it it just the same as the headset but it wont pair to the HTC nor ask an authorization code.
Is this a bluetooth glitch? Can I somehow reload the driver for the bluetooth? Perhaps I am doing something wrong but I never had a problem linking bluetooth devices before.....
On a separate note....I tried doing an activesync via bluetooth on my Dell Laptop and it again can be located on both ends but I can get any services to work on either side...
Help?

I have just received a new HTC TyTN II on Orange that has the same problem. My old one (windows mobile 6.0) had no problem with my Motorola H12, but the new one (Windows Mobile 6.1) can't keep the pairing, and I have to turn Bluetooth on an off to get the connection. Always have to enter the passcode.
Version data is:
CE OS 5.2.19212 (Build 19212.1.0.3)
Processor: MSM7200-400MHz
ROM version 1.65.16.25
G 25.83.40.02H
D 3.28.00.00
Any help /advice much appreciated!
O.

Pyper,
i don't know how it is on the H700, but on the BlueAnt Z9, you have to hold down the power switch until the LED on the headset blinks red very rapidly, when it does this, the headset is in pairing mode. then you can pair the phone with the headset. try something like this with the H700. if you can, find out how to get the H700 into pairing mode before you try to pair it up.
hope that helps!
Pyper70 said:
I recently purchased an AT&T Tilt (TYTN II phone) with Windows 6.1 Dutty Series... since my motorola KRZR took a dump on me....Quite an upgrade...I am trying to use the Motorola H700 Headset from my KRZR on to my HTC, I can get the headset located in the device menu but I cant get the HTC to pair up with the headset on a continual basis. I am also having an issue connecting to a Bluetooth GPS Antenna. I can locate it it just the same as the headset but it wont pair to the HTC nor ask an authorization code.
Is this a bluetooth glitch? Can I somehow reload the driver for the bluetooth? Perhaps I am doing something wrong but I never had a problem linking bluetooth devices before.....
On a separate note....I tried doing an activesync via bluetooth on my Dell Laptop and it again can be located on both ends but I can get any services to work on either side...
Help?
Click to expand...
Click to collapse

I've been having issues with my HTC TyTNII with the official 6.1 ROM and the Jabra BT500V headset. The pairing is automatic in WM6.1. The bluetooth causes the phone to be sluggish and causes call drops if the call's picked up within 3 rings or the call's picked up before it rings on the phone (Yes, Jabra rings first before the phone does). I've escalated this issue to HTC SEA Support and they've advised me to disable Bluetooth and test which I did for the past 3 months :|
I have 3 Jabra headsets (BT250, BT500, BT500V) and all are having the same issue with this ROM. I'm quite skeptical to buy another brand just for testing purposes. Do anyone else face the same issue? HTC SEA has fixes available specific for Jabra / Samsung headsets on Touch Cruise but strangely not on TyTN II

Finds BlueAnt S3 but won't pair
My BlueAnt ST3 pairs fast with a Motorola Razr V3xx but the HTC with WM6 Professional, finds the ST3, prompts for the password (0000) but always fails. On the Razr, I touched the enter key but on the HTC it only beeps. I tried the O.K. key too. The message I am getting after touching "Next" says invalid password or connection. Yes, Bluetooth is turned on and the ST3 as well.
Any ideas anyone?

Hello:
Some time ago I bought an unbranded HTC KAISER with WM6.1:
rom version: 3.29.422.1 WWE
rom date: 05/20/08
radio version: 1.65.20.29
protocal version: 25.88.40.04H
BT VERSION: 2.0/2.0+EDR
BT ADDRESS: 00:17:E8:2E:9F:A1
Anyway, I'm still having bluetooth issues with the unit. The BT works great with BlueAnt Z5i on streaming and music listening but I can't get it to work on phone calls, incoming or outgoing. No sound in the headset nor out of the Mic. Same problem with new Jawbone on calls and a Motorola HS860. Before I waste any more money I thought I'd ask about possile regedits etc. to correct this problem? Or perhaps I should consider new Roms?
Ben lurking here and reading and re-reading and getting more confused..anyone have suggestions or can point me to a probable solution?
Thanks for Listening

I finally got it to pair with BlueAnt ST3 and Motorola T305
BlueAnt ST3: I had to delete the ST3 connection, and get the ST3 in "pairing mode" then have the phone search for bluetooth devices. Doing this I got the password screen and entered the 0000. Driving around testing this, it was not as good as the Motorola Razr V3xx. Not always answering, dropped calls ect.
Motorola BT Speaker: I just received a Motorola T305 BT speaker, same process to get it paired. No voice activated call function yet. Just the two beeps, one indicating it is ready for a command and then it beeps again, and clicks out. The ST3 would talk to you and ask for confirmation.
What I have learned so far, the trick is to get the speaker phone in the pairing mode, so the Kaiser phone will prompt for password.
I am going to sell the Kaiser and buy the HTC touch HD and hope for better bluetooth functionality and reliability.

Hmmm... Actually I have no problem pairing any of the BT items I mentioned, just the handsfree doesn't work in all. Thanks for the reply...

Bluetooth drops incoming call!! :(

Hey guys,
i was wondering if anyone was facing this problem... i have the Alpine 103BT in my car which has an inbuilt parrot bluetooth system. I have noticed that when someone calls me it shows up on the lcd on the headunit then immediately drops the call! it shows up as a missed call on my tp2... but when i call using this bluetooth system then it works like a charm!
Any idea what i can do to change this? Is there a setting i have inadvertently changed?
I would really appreciate this because this call dropping really defeats the point of hands free!
Elfangor

I've got the same problem.
Just look a few posts down the list and you'll notice my 'cry for help'.
So far though, nobody's come to the rescue.
I've been reading that our phones have a unique BT-implementation, so it could be down to a bug in that area. If more people show up having similar issue, we might know.
Until then: fingers crossed and hope for sombody to post a solution.

Great! its not just me then! I hope it gets sorted! it gets on your nerves after awhile!

That's putting it mildly.
This sucks big-time: when on a business-call you definitely don't want your headset to die in you. During any conversation, really, but blasting along the motorway it's the last thing you need.

I also have an alpine 103 bt and an htc touch(elf) with onyx rom on it.
my problem is that when i make a call either from the head unit or the phone on the head unit it stops the music, displays CALLING and then after 3 seconds it displays ------------- , resumes the music, but the phone doesnt hang up. It continues the call, shows that is stil connected but you cant hear anything.
this is really frastrating as it does this sort of thing randomly and not always.
any thoughts?

Your symptoms sound a bit different from ours so it could be a totally different problem.
We might need to be paitient until one of the experts has a simiral experience and dived into the software.
Until then, I'm baffled.

eidikos said:
I also have an alpine 103 bt and an htc touch(elf) with onyx rom on it.
my problem is that when i make a call either from the head unit or the phone on the head unit it stops the music, displays CALLING and then after 3 seconds it displays ------------- , resumes the music, but the phone doesnt hang up. It continues the call, shows that is stil connected but you cant hear anything.
this is really frastrating as it does this sort of thing randomly and not always.
any thoughts?
Click to expand...
Click to collapse
Come to think of it... i have a similar problem.. when i get an incoming call it stops the music and registers a call and just a few second later..i get the --------------, and then the music comes back...by the time i fish my phone out of the pocket ive got a missed call! havnt noticed any problems when im calling though.
i tried repairing the phone to the unit but same thing! not sure what else i could do

Similar problem (I think)
Cant get a working setup in my car kit. I have a Jaguar XF SC with bluetooth handsfree...The TP2 (TMO US) pairs and docks fine, but doesnt work well. Incoming calls dont seem to be recognized, and outbound calls will dial and communicate, but wont hangup. When I hang up from the TP2, the car kit still thinks its connected and mutes the radio until i forcebly disconnect from TP2...
arg...

I've got exactly the same problem as the original poster. Mine's a vodafone TP2 with the standard vodafone rom. I've got the Alpine 104BTi. I can make outgoing calls ok but as has been described any incoming call will show the caller ID for about 1 ring and then it hangs up the call.
I've got a Jabra BT500 which works perfectly. I am wondering whether it may be the actual firmware in the Alpine device. If you look at the phone compatibility list on the Alpine website the TP2 is not listed. It worked fine with my Kaiser and this is listed as compatible.
I emailed their tech support and they said they are waiting for their customized version of the firmware from Parrot to be updated, possibly around September. I've noticed that for the Parrot standalone devices these all list the TouchPro2 as compatible, so maybe this will be fixed.
They did mention that the firmware update may only be available through the dealers. I'll keep an eye on their website. My current firmware version is 320.
I've read some other threads somewhere that people with the vodafone rom describe having problems with bluetooth that are fixed after flashing with a different rom so may turn out to be that.
Infuriating though.

It seems to be the poor implementation of the new BT stack
I have had similar problems to those described above, my Peugeot van has inbuilt BT (uses Parrot in implementation) which just misbehaves unbelievably including hanging up the current call if a new one comes in on call waiting, phonebook access is rediculously slow and buggy.
My Jabra BT8010 disconnects at random
My Jawbone disconnects very occasionally
The stack is full of bugs and HTC must know it - I reported it on their support system and firstly fobbed off, then they said they would look into it, then the log was auto closed - very convenient way to show they are meeting targets in resolving issues.
It is poor, poor and more poor. The new WIDCOMM stack looks great but doesnt really work.
Very poor for a flagship handset and they should sort something out

I went to an Alpine delearship who suggested what ukdoc was trying to do.. basically firmware update! Are you using a different Alpine website? Because the one i go to says coming soon on the page where software updates are supposed to be. I culdnt find any connection with parrot and alpine on the parrot website!
Basically what im asking is how are you going to be getting the firmware update and could you direct me towards it!
Many thanks Mate
Elfangor

rlsxda said:
Cant get a working setup in my car kit. I have a Jaguar XF SC with bluetooth handsfree...The TP2 (TMO US) pairs and docks fine, but doesnt work well. Incoming calls dont seem to be recognized, and outbound calls will dial and communicate, but wont hangup. When I hang up from the TP2, the car kit still thinks its connected and mutes the radio until i forcebly disconnect from TP2...
arg...
Click to expand...
Click to collapse
FYI, I just upgraded the radio to "4.46.25.24 - HTC" (see http://forum.xda-developers.com/showthread.php?t=549939) and the handsfree seems better...not sure it's perfect, but it does answer and hangup now...

Upgrade Alpine CDE-104BTi firmware from 320 to 360
I have just updated the firmware in my CDE-104BTi radio to version 360
http://www.alpine-electronics.co.uk/support/bluetooth-update-software.html
This has fixed the problem of not being able to recieve incomming calls on my HTC Touch Pro 2.

dsalter said:
I have just updated the firmware in my CDE-104BTi radio to version 360
http://www.alpine-electronics.co.uk/support/bluetooth-update-software.html
This has fixed the problem of not being able to recieve incomming calls on my HTC Touch Pro 2.
Click to expand...
Click to collapse
I've just done likewise, and can also receive incoming calls at last!

Hi
I just tried updating the BT in my Alpine 104bti. The laptop connects to the headunit but the update tool don't find the connection, I've tried disabling the antivirus etc. But it don't see the connection but the connection is displayed on the laptop.
Any Ideas whats wrong ?
Cheers Gomez...

SOLVED
Tried again using a laptop with Xp on worked first time, Seems Windows 7 was causing issues.

Incredible + A2DP on Kenwood kiv bt-900?

Just had the new kenwood deck installed... Should do almost anything. I have my incredible paired up and calls are clear. Problem is A2DP audio streaming. Does not work. No A2DP device is found. Yes, the manual gives directions to play streamed audio once bt is synced. Well, its synced, got my phone book on there, and calls are being made.
Any thoughts or ideas to get streaming audio?

I don't have any help to offer, but I am experiencing the same problem with my Pioneer FH-P8000BT. Pairs for phone calls with no issue and everything is clear, but the radio does not even "see" the device as being available for A2DP.
I previously paired a few different HTC phones (all running Windows Mobile) with this radio with no issues. I'm hoping it's a simple fix, but I can't find a single thing in the settings that I haven't played with to try and get it to work.

I have an Alpine HU with an Alpine KCE-400BT bluetooth add on. My streaming audio is working, although I don't get any song/artist info on screen. I do have an issue where the phone doesn't sync up all the time. It syncs up great in the morning. If I stop for gas or something (turn off the car briefly) and get back in, then the radio won't see the phone until a call comes in or is started from the phone (or I toggle BT on/off).
You might check with Pioneer on any firmware udpates.

My incredible works great with my Ford sync system. It always connects, calls are loud and crisp, and streaming bt audio works great. I use it to listen to Pandora all the time.
-------------------------------------
Sent via the XDA Tapatalk App

seanmcd72 said:
I have an Alpine HU with an Alpine KCE-400BT bluetooth add on. My streaming audio is working, although I don't get any song/artist info on screen. I do have an issue where the phone doesn't sync up all the time. It syncs up great in the morning. If I stop for gas or something (turn off the car briefly) and get back in, then the radio won't see the phone until a call comes in or is started from the phone (or I toggle BT on/off).
You might check with Pioneer on any firmware udpates.
Click to expand...
Click to collapse
I have seen other people post issues with having bluetooth on the phone enabled before the car is on. If you turn the car on first and then the phone's bluetooth they said it worked fine.

I have Kenwood HU and my phone won't pair with it. my Blackberry Paired with it fine, and even did A2DP, and worked awesome...now......nothing.
Been looking for some answers as to why, but after calling Kenwood they said it's a software update that is missing.
however, seeing as some people are getting it working fine....I am suspecious.

Kenwood 4160 working, actually better
My 4160 and serveral WM units worked, but the A2DP always had to be turned on by going into the menu every single time I wanted to listen to anything from the phone, but the Incredible does it by itself every time perfectly.

I have a Pioneer AVIC N4 and the audio for both calls and music works just fine out of the box.

I have the kiv-bt900 also, and it is my understanding that it does not have A2DP. I believe the A2Dp in the manual is referring to the KIV-700 with the add on bt module.
From page 67 (of the downloaded manual from Kenwood)
KIV-BT900
Supported Bluetooth Profiles:
Version: Bluetooth Standard Ver. 2.0
Profile: HFP (Hands Free Profile)
OPP: (Object Push Profile)
PCAP (Phone Book Access Profile
SYNC (Synchronization Profile)
I thought it had it too when i bought it. Maybe a future update will enable it though??

What does A2DP mean please?

it stands for Advanced Audio Distribution Profile. In simple terms, it's stereo audio transferred from one device to another via bluetooth. Example: Music from a phone/mp3 player to stereo bluetooth headphones, head units etc..

Thank you.

Boozie2 said:
I have the kiv-bt900 also, and it is my understanding that it does not have A2DP. I believe the A2Dp in the manual is referring to the KIV-700 with the add on bt module.
From page 67 (of the downloaded manual from Kenwood)
KIV-BT900
Supported Bluetooth Profiles:
Version: Bluetooth Standard Ver. 2.0
Profile: HFP (Hands Free Profile)
OPP: (Object Push Profile)
PCAP (Phone Book Access Profile
SYNC (Synchronization Profile)
I thought it had it too when i bought it. Maybe a future update will enable it though??
Click to expand...
Click to collapse
Well damn. The deck was sold to me from car toys (local vendor) under the pretense that it would do zune (works great) and A2DP...
Usb works great too... I was thinking of formatting a laptop drive to the mac file system (hfs) and hooking it up to the usb port to get a200GB drive of mp3 and video since it supports ipods. (works on xbx360, why not here?)

OK so a small fix, but not the end result.
with my Kenwood head unit I can make it work as long as I don't let it download the phonebook. and that is no problem since the phone sits on my dash in the car dock. but the problem is that EVERY time I start up my truck, or after I end a call it asks to re-download the phonebook.
it kinda irks me, but I cannot get it to stop asking, no setitngs on the stereo work.

I emailed Kenwood about possibly releasing a firmware update to include A2DP to the kiv bt900. They responder saying that there isn't enough demand for the feature for them to create a firmware update. So if we get enough people contacting them and requesting that feature, they will release and update. So you guys should all contact them to increase the demand for this feature. Hope this helps.
Here is exactly what they responded:
"I understand that you're inquiring about the KIV-BT900's Bluetooth features. We do apologize for any difficulties that you've experienced with this item. Unfortunatley, we cannot assist you with any firmware updates at this point since this model was just recently released to the market. Our company has not received enough demand for this feature which prevents us from developing or releasing an update for the KIV-BT900 unit. We may release an Bluetooth update in the future, however it's hard to determine at this time."

I'm willing to start complaining and sending some emails out to them. What email address did you send it too? I just got the player and that is def the only thing missing to make it complete for me.

I tried emailing the regular support channels and got the below message.
Thank you for contacting Kenwood USA Corporation. We value you as a Kenwood customer and appreciate the opportunity to be of assistance.
I Understand you are inquiring about any updates to allow the A2DP profile.
There is currently no available updates and there hasn't been information on upcoming updates for the A2DP profile. We ask that you check back at a later date to verify if one is posted through the www.kenwoodusa.com website.
We apologize for any inconvenience.
Please feel free to contact us again with any additional questions.

I spoke with a rep and they mentioned that A2DP missing from the unit is the most often called in issue about the unit.
I have a KDC-BT948 with the same issue. They removed A2DP and put in Pandora instead..and it only works through iPhone, which then uses up wireless data on a cell phone plan. So Android, MS phones, and any other bluetooth device can no longer be used with a Kenwood Car Stereo. Someone at Pandora really made an impression at someone in Kenwood. It is too bad that they are limiting consumers with their choice which ultimately limits their sales and increases complaints.
Should have everyone go do this and request a fix.
Go to the Kenwood Contact page and send an email
This is what I sent
I have purchased the KDC-BT948HD radio.
Where I am overall happy with many of the features, looks, variable colors, and excellent sound quality of the unit, there are several things that I am extremely dissapointed in and would like to see an update released to resolve them.
1. SMS Received message on the unit: Might be useful to some, but to me it is a dangerous distraction while driving, especially at night. It has me take my eyes off the road to look at the unit and makes me want to look at my phone to read/send texts. Texting and driving is illegal in many states and there should be a way on the unit to allow a selection to turn this feature off.
2. BT Audio (A2DP) is missing. I have an Android phone with my music on it. Alone there are more Android phones than iPhones in use today. I wanted to have Bluetooth streaming audio so I can play my music from my phone to the unit. For such a high technology unit, it should be part of the firmware and flexibility to the consumer to use their device with more options. The previous year units had this enabled and seems to be disabled now replaced by a focus on a wired Apple connection and Pandora. Forcing use of Pandora also forces consumers to use up data rates on their wireless plans. If A2DP were enabled, more consumers could enjoy the product integration with standard BT devices offered by Apple, Android, Microsoft and many others. All could enjoy the music and audio applications on their devices including Pandora. I would like to request that A2DP be added to the firmware and source selection on this device. I should yield increase product ratings and sales as web searches show many complaints about this issue.
I would value your feedback on these points and potential solutions.
Best regards

drtretj said:
My incredible works great with my Ford sync system. It always connects, calls are loud and crisp, and streaming bt audio works great. I use it to listen to Pandora all the time.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Plus 1 for Sync
Sent from my HTC Droid Incredible using XDA App

[Q] WP7 Bluetooth Support

Just wondering what bluetooth services people are seeing on there WP7 phones.
I have a HD7 on T-Mobile USA and it's only advertising the following to my Windows 7 computer:
A2DP
Headset Audio Gateway
Remotely Controllable Device
Thanks

a2dp as a service for the phone? not sure, but my friend bought the hd7 on my recommendation and he can't get audio for video files through a2dp and its killing him
hopefully wp7 has some cool tricks up its sleeve based on what you got there

I'm interested in four bluetooth profiles, if and how they are compatible and work.
- A2DP
- AVRCP
- Handsfree
- Bluetooth HID for Keyboard
any news mostly about the BT HID Keyboard?

I found this on Microsoft Support site:
Windows Phone 7 supports the following Bluetooth user profiles:
Advanced Audio Distribution Profile (A2DP 1.2)
Audio/Video Remote Control Profile (AVRCP 1.0)
Hands Free Profile (HFP 1.5)
Headset Profile (HSP 1.1)
Phone Book Access Profile (PBAP 1.0)
http://support.microsoft.com/kb/2449475

This is the first device I have seen that supports SMS over bluetooth. If you have a Ford product with SYNC, you can use SMS over bluetooth. It also works with my Kenwood head unit. Basically, you can see incoming messages and, in the case of SYNC, send canned replies from the head unit. On my Kenwood, there is actually an on-screen keyboard to send any message you like. Cool stuff really!

bravo261 said:
a2dp as a service for the phone? not sure, but my friend bought the hd7 on my recommendation and he can't get audio for video files through a2dp and its killing him
Click to expand...
Click to collapse
same problem with my htc trophy. audio for video files only plays through the loud speaker and not through the bluetooth headset. I tried the blueant q1, jabra stone and jabra extreme with the same results

i have a Samsung Focus and i am having the same issue with no BT audio from videos. i tested the HTC Surround and LG Quantum at the ATT store with the same results. i am using a Jabra BT3030 which worked perfectly on my Microsoft KIN, audio streamed and play controls (Play/Pause/FF/RW) worked.

A2DP
Does anybody know if an A2DP video fix is coming up in the NoDo update? I'd say it's way more important than copy-paste, but regardless of importance, it is an important feature.
Any news?

noone knows outside of MS as far as i'm aware. we only know about copy/paste and app performance improvements because they told us. only time will tell if they actually fixed the issue.

hands free car kit and voice activation
When my LG is linked to the Bluetooth hands free car kit (Landrover) the voice activation doesn't work.
It opens but it doesn't "hear" anything
Since this is about the only time i actually need voice activation it's a bit annoying
Anyone have any ideas?

I totally agree about this bug. Who the F cares about copy and paste? How about turn-by-turn navigation for Bing Maps like was released last year for WM6.5 ?