Develop Bugs

Upgraded to WM6 - now looking for WM5 tones

(posted here because I suspect this is where I will find someone else sharing my goal)
So when moving from AKU 3.3 to vanilla 6, I noticed some of the original ring tones were missing. One example is "oldphone". I know some others are missing as well, but do not recall the specific names. I extracted my SPB backup made under AKU 3.3, but for some odd reason it did not contain that specific tone. Is it hiding somewhere? I cant figure out why it wasnt part of the backup (it seems all other tones are there). Is there some way to decompile the 3.3 (or prior WM5) roms in order to extract those legacy tones?
Thanks in advance for assistance.
Al

Can you tell me if the guitar ringtone is in WM5? I know at one time I had an electric guitar sounding ringtone..

MrDSL said:
Can you tell me if the guitar ringtone is in WM5? I know at one time I had an electric guitar sounding ringtone..
Click to expand...
Click to collapse
That sounds familiar - I think it's in 5, but it is not in 6 (at least not in the original vanilla 6). Perhaps some kind soul will make the old tones available to those of us that miss them.

allynm said:
That sounds familiar - I think it's in 5, but it is not in 6 (at least not in the original vanilla 6). Perhaps some kind soul will make the old tones available to those of us that miss them.
Click to expand...
Click to collapse
I kept all ringtones from WM5. Tell me where to upload to - I'll do it tomorrow.
Best regards,

I'd like to get my hands on a few old ring tones as well.
If you email me the file, I will host it on my server for everyone to access.

allynm said:
(posted here because I suspect this is where I will find someone else sharing my goal)
So when moving from AKU 3.3 to vanilla 6, I noticed some of the original ring tones were missing. One example is "oldphone". I know some others are missing as well, but do not recall the specific names. I extracted my SPB backup made under AKU 3.3, but for some odd reason it did not contain that specific tone. Is it hiding somewhere? I cant figure out why it wasnt part of the backup (it seems all other tones are there). Is there some way to decompile the 3.3 (or prior WM5) roms in order to extract those legacy tones?
Thanks in advance for assistance.
Al
Click to expand...
Click to collapse
Here you go, all ringtones, alarm tones etc for WM6, the 'old phone' is included with them in the Crossbow sounds folder, have fun!
Edit:- Roaring Guitar included amongst them!

boz said:
Here you go, all ringtones, alarm tones etc for WM6, the 'old phone' is included with them in the Crossbow sounds folder, have fun!
Edit:- Roaring Guitar included amongst them!
Click to expand...
Click to collapse
Much appreciated!
So I'm curious, why did 'oldphone' come with my original HTC rom, yet crossbow was missing it? I would have figured it would be the other way around... Unless the 'vanilla' 6 was so stripped down that it lacked the additional rings...?
How are you liking that Black edition, BOZ? I'm planning to switch over just as soon as I can figure out a proper way to backup / restore my call history (so I don't lose them during the switch).
Thanks again.
Al

allynm said:
Much appreciated!
So I'm curious, why did 'oldphone' come with my original HTC rom, yet crossbow was missing it? I would have figured it would be the other way around... Unless the 'vanilla' 6 was so stripped down that it lacked the additional rings...?
How are you liking that Black edition, BOZ? I'm planning to switch over just as soon as I can figure out a proper way to backup / restore my call history (so I don't lose them during the switch).
Thanks again.
Al
Click to expand...
Click to collapse
All the WM6 roms are cooked bare bones roms and they are put together by the developers on here, so they choose which ringtones etc are on the roms, they pick only a few on the assumption that people will have their own to add anyway, and every bit of space saved is valuable. HTC use a fixed list and apply them to every WM5 rom, so it is easy for them to appeal to the masses.
I am very pleased with this rom and it runs perfectly with no problems whatsoever after applying all fixes and patches, it is much faster than WM5. I really notice when switching between applications, TomTom 6 which I use a lot is very fast now, do not forget that I have also upgraded the radio for a much improved reception with the phone.

boz said:
Here you go, all ringtones, alarm tones etc for WM6, the 'old phone' is included with them in the Crossbow sounds folder, have fun!
Edit:- Roaring Guitar included amongst them!
Click to expand...
Click to collapse
Thanks for posting this! I meant to copy all of the ringers off of my device before upgrading the ROM. However, after I did a backup, made sure all the documents I needed had been synchronized with my computer (so I'd have them in at least two places), and got everything else ready I never even got the feeling like I was forgetting something...not until I went to change my ringtone...
Thank again!

Thanks for the WM5 tones. I was thinking of downgrading to get a copy of the tones. You saved me couple of hours
-Anand

hey guys, but i'm still missing a few tones from wm5, such as "u got msg" or the other 1 "u got mail" .... this two sound is mising. its a lady voice speaking, its the best sms n email tone for me..so can anyone pls pl spls upload it now!! tqtqt
thanks

b.u.m.p
need the new tones!! pls guys!! help!! thx

Sliding Sounds for Hermes?

In this thread, there's been some talk about sliding sounds and even a cab file posted, but It doesn't work on my 8525.
I saw another thread on MoDaCo about adding additional sliding sounds to the Vox, and see another registry key that may be needed. They are...
<snip from MoDaCo>
\\HKCU\ControlPanel\Sounds\
In here you have three keys:
SlidingIn
SlidingOut
SlidingSound
</snip from MoDaCo>
Anyone have these keys on their phone? We need more details. I'd like to try it on the 8525.

I had made a thread regarding this about amonth ago. haven't heard of anything as of late, but would still love to have this feature

That would be a kick azz feature....

roboHaxx said:
In this thread, there's been some talk about sliding sounds and even a cab file posted, but It doesn't work on my 8525.
I saw another thread on MoDaCo about adding additional sliding sounds to the Vox, and see another registry key that may be needed. They are...
<snip from MoDaCo>
\\HKCU\ControlPanel\Sounds\
In here you have three keys:
SlidingIn
SlidingOut
SlidingSound
</snip from MoDaCo>
Anyone have these keys on their phone? We need more details. I'd like to try it on the 8525.
Click to expand...
Click to collapse
Not present there on my phone.. Not sure how to add them correctly to test..

If you want sliding sounds for a hermes100 here is the two .cab files you need. one is the stock sound off of the kaiser, the other makes them work.

Hi,
use the attached cab for Hermes.
You can find after Reset in Settings Menu > Personal Page.
wfg
starbase64

the htcsliding.zip are 4 of the sounds supposed to sound like a robot on steroids?

is there not a twikley noise for open and shut? or how can we add our own thanks
*the slider sound isnt working for me*!!

HTC S620 AudioGain default registry values

Hello guys,
While trying to have a louder sound when I listen to music on headphone, I tweaked the registy and now I don't have any sound when playing a music file. I do have system and call sound though (hopefully).
I have a HTC S620 with WM6.
Can someone give me his default value for the following registry keys :
HKEY_LOCAL_MACHINE/Software/HTC/Audiogain
CODEC_GAIN_HEADSET (00 think)
EAC_GAIN_HEADSET (67 I think)
EARDPHONE_UPLINK_VOLUME
ENABLE_AUGA_HEADSET
HEADSET_UPLINK_VOLUME
Thanks in advance for your help.
EZToms

Dunno exactly how to fix your current dilemma but in the future I believe smarttoolkit has a control for max volume for the s620.

In fact, I know exactly which registry keys I modified but didn't write the values before changing them. So I just need that someone looks at his registry and give me the values he has for those keys.
So if someone has a minute to have a look on his phone, I'd be thanksfull.
Regards,
EZToms

This is a good thread to read:
http://forum.xda-developers.com/showthread.php?p=1096791#post1096791
EAC_GAIN_ EMBEDDED was 70, going to 80 or over wipes out the sound
RECEIVE_UPLINK 19
CODEC_GAIN_EMBEDDED 70
EARPHONE UPLINK 15
Try those and if that doesn't get it, I'll get the others for you.

Still no sound in media player. If you have the few missing one so I can try.

I copy these from my S620:
CODEC_GAIN_HEADSET 07
EAC_GAIN_HEADSET 67
EARDPHONE_UPLINK_VOLUME 10
ENABLE_AUGA_HEADSET 00
HEADSET_UPLINK_VOLUME 11

Thanks a lot, I will try those

let me know if you need all data from there
best of luck m8!

No Windows Media/Ringer sound
Help - I have a similar problem ...
I overtweaked the settings to death.
Can anyone post the definitive complete set of default settings for
Audiogain (and Audiogain)
Reinstalling 6.1 is really not an option I want to try just yet (it took me months to finally get it workiing - with those odd email/smtp problems ... but that's another thread).
I think posting the complete set of default audio settings would help a great many people here (and even better if we can eventually get a set of optimized audio settings).
Thanks !!!

If you messed around with more then these settings, posting #149 & #150, you're gonna have to wait till someone uploads that reg key.

Yes, I messed around with the settings ... but it does not mean I hacked her! ; ) jk. Thanks for the useful link ... sort of. Great info there, but my phone still does not ring,
Hoping for help! Anyone tweaked bluetooth volume settings only to have the ringers go silent?
ThanksS
Mikey1022 said:
If you messed around with more then these settings, posting #149 & #150, you're gonna have to wait till someone uploads that reg key.
Click to expand...
Click to collapse

Here you go:

Samsung i780 - increasing ringtone - sick of it

Hi
I have been trying to remove this increasing pice of ****.
1. In sound settings in WM5 i have selected sound type NOT TO "Increasing"
2. I have tryied to apply Ringtone Scripts at HKEY_CURRENTUSER\ControlPanel\Sounds\RingTone0
Currently I am using "ac100pr". I had all combinations of these scripts. None of them work with "c" - which should set volume to 100.
It is always the same. First two quiet rings, then the rest at full volume.
How to change this?
I am really going to sell this crap if the rest of the WM5 works similarly.
Kind Regards
PK

piterfromwawa said:
Hi
I have been trying to remove this increasing pice of ****.
1. In sound settings in WM5 i have selected sound type NOT TO "Increasing"
2. I have tryied to apply Ringtone Scripts at HKEY_CURRENTUSER\ControlPanel\Sounds\RingTone0
Currently I am using "ac100pr". I had all combinations of these scripts. None of them work with "c" - which should set volume to 100.
It is always the same. First two quiet rings, then the rest at full volume.
How to change this?
I am really going to sell this crap if the rest of the WM5 works similarly.
Kind Regards
PK
Click to expand...
Click to collapse
hi
its actually wm6 ...wait some time i hear wm6.1 will be released for it in the neat future

It is WM5 not WM6.

So, you've got a samsung i780 with wM5 ?
interesting

piterfromwawa said:
It is WM5 not WM6.
Click to expand...
Click to collapse
dude , wm5 --> OS 5
5.1 and 5.2 are wm6 and above... if u have ai780 with wm5 keep it .. it will sell for more because it is an antique now !

Increase Incall Volume for Tilt2???

Attached below are all files/cabs ive tried and none doing any better then the other. Sure the bluetooth volume is increased as well as the speaker on the back of the phone, but looking to also have the small speaker (that you normally use to listen to the other person, one on the front of the phone) to increase since its still low even at the max level! Any ideas? Ive tried installing the full audio boost cab, then the tilt2 specific cab (anyone know what the difference is here?), then copied and overwrote the audiopara3 file in windows, soft reset, even tried a soft reset inbetween each process and still no good. Any ideas?

deeznuts said:
Attached below are all files/cabs ive tried and none doing any better then the other. Sure the bluetooth volume is increased as well as the speaker on the back of the phone, but looking to also have the small speaker (that you normally use to listen to the other person, one on the front of the phone) to increase since its still low even at the max level! Any ideas? Ive tried installing the full audio boost cab, then the tilt2 specific cab (anyone know what the difference is here?), then copied and overwrote the audiopara3 file in windows, soft reset, even tried a soft reset inbetween each process and still no good. Any ideas?
Click to expand...
Click to collapse
Try the files I attached, and then reset the phone before attempting, also make sure the volume is all the way up before testing incalls.
Files included are:
AudioPara3_AttMax (Directly into Windows folder)
Bluetooth Line Speed.cereg (Import to Phone Registry. I used CE RegEditor)
Modified Incall Loud Settings (2 Locations)
Ring Setting
I take no credit for the Mods.
Reboot and try it out.
Works on an ATT Tilt 2 with EU Rom Stock. (USA)

AngelDeath said:
Try the files I attached, and then reset the phone before attempting, also make sure the volume is all the way up before testing incalls.
Files included are:
AudioPara3_AttMax (Directly into Windows folder)
Bluetooth Line Speed.cereg (Import to Phone Registry. I used CE RegEditor)
Modified Incall Loud Settings (2 Locations)
Ring Setting
I take no credit for the Mods.
Reboot and try it out.
Works on an ATT Tilt 2 with EU Rom Stock. (USA)
Click to expand...
Click to collapse
These actually do work quite well! I think better then all the above i posted! Anyway to get this in cab form? Kind of a hassle each time i flash a new rom to have to use the desktop ce reg program to import these values each time. Cab would be much nicer if at all possible? Thank you

Made a cab of his settings for anyone that wants to try it ..
Increase Volume.cab
Also here is one that seems to work for me ..
Audio_FINAL1.0_PRO2.cab

Warlock, U beat me to it, but I looked at your file, and seems you made some changes, which aren't my settings, probably to make it work with yours, but I appreciate you making one. I've upped mine as well, which is exactly the same thing as the zip folder just in cab form as requested.

So which ones do what?
This is getting confusing. We now have all these CABS. Much appreciated but which ones do what? Is there just ONE that will increase the speaker volume and earpiece volume and do they also affect the ring-tone volume? I don't know how to compare them all. Can you help clarify please?

davidgee said:
This is getting confusing. We now have all these CABS. Much appreciated but which ones do what? Is there just ONE that will increase the speaker volume and earpiece volume and do they also affect the ring-tone volume? I don't know how to compare them all. Can you help clarify please?
Click to expand...
Click to collapse
Download the files attached to my first post if you dont mind editing the registry. And add the CSV file into the windows folder. If you do not like to mess with the registry, then download my cab file attached to my post and it will install and if you dont like it you can uninstall it from remove programs.
Warlock as nice enough made a cab file, but looking at it seems to have changes in his, so as not to confuse anyone my set of files work. But remember you must install the AudioPara3_ATTMax in the windows folder of the phone.

hey angeldeath, i modified your cab file to include the audiopara file as well.
look on next page for volume cab

Thanks xredjokerx I didnt know how to do that LOL (Aint that sad?)

xredjokerx said:
hey angeldeath, i modified your cab file to include the audiopara file as well.
NOTE: THIS FILE IS THE SAME AS THE ABOVE FILE POSTED BY ANGELDEATH BUT WITH THE AUDIOPARA FILE ALREADY INCLUDED (it will install itself to the windows directory)
Click to expand...
Click to collapse
Thank you everyone, awesome work! Love it when great minds come together. Ill try this one first since these files are the ones that did the trick for me the first time. Any ideas on if i installed this cab, then installed warlock's second cab he posted? I think his first cab is just a mix of these files but his second cab is said to be different. Any ideas on that?

xredjokerx said:
hey angeldeath, i modified your cab file to include the audiopara file as well.
NOTE: THIS FILE IS THE SAME AS THE ABOVE FILE POSTED BY ANGELDEATH BUT WITH THE AUDIOPARA FILE ALREADY INCLUDED (it will install itself to the windows directory)
Click to expand...
Click to collapse
This cab doesnt seem to work. Just took a nap and woke up 20min late cus my device had no sound! I installed this cab, soft reset, now phone has zero sound when u adjust the volume with side hard keys in volume control, alarm clock, stuff like that theres zero sound!

Winner!
WarlockW said:
Made a cab of his settings for anyone that wants to try it ..
Increase Volume.cab
Also here is one that seems to work for me ..
Audio_FINAL1.0_PRO2.cab
Click to expand...
Click to collapse
tried the increase volume cab, soft reset, checked all sounds on device and all working perfect and much louder! Im not hard of hearing, just my work environment can be very loud at times and moving around a lot i dont always feel my phone vibrate so i need a loud ringer and very loud earpiece as well!
I also installed the second cab (audio_final), soft reset, tested all sounds and all working fine.
To warlock, whats the difference between the first cab u put together and the second cab? Is it best to install both as i did or use one or the other?

I would use just one ..
try it .. if it works great .. if not uninstall it.
try the other ..
if it works great .. if not uninstall it.

WarlockW said:
I would use just one ..
try it .. if it works great .. if not uninstall it.
try the other ..
if it works great .. if not uninstall it.
Click to expand...
Click to collapse
Sounds good. Was just curious if one did something the other cab didnt and if it would be better to install both to get the best of both worlds? Either way, greatly appreciate the work!

still confused!
I installed marcini.thinkblu-tilt2 vol increase.cab because it reduces the bassiness heard when the headset is connected as well as increasing the headset volume. But what exactly do these other CABS do? There's the handset earpiece volume, the speaker volume, the headset volume and the ringtone volume. What does what? And as one CAB posted here appears not to work, can someone produce an alternative or one CAB that does everything? Thanks for all your input. This is a necessary adjustment to an expensive phone that we can't hear.

The Cab warlock put up after me isnt my file, the reason is cause if you install his cab his cab points to a file that doesnt exist, thats why you would get no sound. My files (In my posts) will, cause the file name it refers to is also attached to my post. So I suggest you dont mix and match or your going to have many sound problems.
These files do the following (Under my posts)
Increase the Ear piece, increase the bluetooth earpiece and sound quality, and increase the ringer of the phone to better hear in a loud enviroment.

AngelDeath said:
reason is cause if you install his cab his cab points to a file that doesnt exist, thats why you would get no sound.
Click to expand...
Click to collapse
Just to correct you .. you are incorrect. yes it does ..
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev
\windows\AudioPara3_1MAX.csv
File: \windows\AudioPara3_1MAX.csv
All I did was change the name so it didnt over right any current files.
Anyway .. Use what works
< THEY ALL CAN BE UNINSTALLED>

HOLY CRAP THATS LOUD....
now i have to turn the volume down, otherwise blast out my ear drums... haha this thing is great!
can ya hear me now? YES!

deeznuts said:
This cab doesnt seem to work. Just took a nap and woke up 20min late cus my device had no sound! I installed this cab, soft reset, now phone has zero sound when u adjust the volume with side hard keys in volume control, alarm clock, stuff like that theres zero sound!
Click to expand...
Click to collapse
oof sorry, i changed the directory of where the file was installed to \Windows instead of %windows% and now all is fixed. sorry about your nap! RE-UPPED
also, beware of any damages that may occur if you raise the volume of any speaker. This is a disclaimer protecting myself, angeldeath and warlockw from any liability in case of any speaker damage. use at your own risk xD
(im using one too, so we're on the same boat if we sink)

WarlockW said:
Just to correct you .. you are incorrect. yes it does ..
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev
\windows\AudioPara3_1MAX.csv
File: \windows\AudioPara3_1MAX.csv
All I did was change the name so it didnt over right any current files.
Anyway .. Use what works
< THEY ALL CAN BE UNINSTALLED>
Click to expand...
Click to collapse
WarlockW Buddy, sorry I opened the cab but didnt see anything other then the reg entry, but the AudioPara3_ATTMAX.csv doesnt exist on any phone, but no problem, as long as everyone is happy is what counts.
xredjokerx,
Thanx for the Disclaimer