Attached below are all files/cabs ive tried and none doing any better then the other. Sure the bluetooth volume is increased as well as the speaker on the back of the phone, but looking to also have the small speaker (that you normally use to listen to the other person, one on the front of the phone) to increase since its still low even at the max level! Any ideas? Ive tried installing the full audio boost cab, then the tilt2 specific cab (anyone know what the difference is here?), then copied and overwrote the audiopara3 file in windows, soft reset, even tried a soft reset inbetween each process and still no good. Any ideas?
deeznuts said:
Attached below are all files/cabs ive tried and none doing any better then the other. Sure the bluetooth volume is increased as well as the speaker on the back of the phone, but looking to also have the small speaker (that you normally use to listen to the other person, one on the front of the phone) to increase since its still low even at the max level! Any ideas? Ive tried installing the full audio boost cab, then the tilt2 specific cab (anyone know what the difference is here?), then copied and overwrote the audiopara3 file in windows, soft reset, even tried a soft reset inbetween each process and still no good. Any ideas?
Click to expand...
Click to collapse
Try the files I attached, and then reset the phone before attempting, also make sure the volume is all the way up before testing incalls.
Files included are:
AudioPara3_AttMax (Directly into Windows folder)
Bluetooth Line Speed.cereg (Import to Phone Registry. I used CE RegEditor)
Modified Incall Loud Settings (2 Locations)
Ring Setting
I take no credit for the Mods.
Reboot and try it out.
Works on an ATT Tilt 2 with EU Rom Stock. (USA)
AngelDeath said:
Try the files I attached, and then reset the phone before attempting, also make sure the volume is all the way up before testing incalls.
Files included are:
AudioPara3_AttMax (Directly into Windows folder)
Bluetooth Line Speed.cereg (Import to Phone Registry. I used CE RegEditor)
Modified Incall Loud Settings (2 Locations)
Ring Setting
I take no credit for the Mods.
Reboot and try it out.
Works on an ATT Tilt 2 with EU Rom Stock. (USA)
Click to expand...
Click to collapse
These actually do work quite well! I think better then all the above i posted! Anyway to get this in cab form? Kind of a hassle each time i flash a new rom to have to use the desktop ce reg program to import these values each time. Cab would be much nicer if at all possible? Thank you
Made a cab of his settings for anyone that wants to try it ..
Increase Volume.cab
Also here is one that seems to work for me ..
Audio_FINAL1.0_PRO2.cab
Warlock, U beat me to it, but I looked at your file, and seems you made some changes, which aren't my settings, probably to make it work with yours, but I appreciate you making one. I've upped mine as well, which is exactly the same thing as the zip folder just in cab form as requested.
So which ones do what?
This is getting confusing. We now have all these CABS. Much appreciated but which ones do what? Is there just ONE that will increase the speaker volume and earpiece volume and do they also affect the ring-tone volume? I don't know how to compare them all. Can you help clarify please?
davidgee said:
This is getting confusing. We now have all these CABS. Much appreciated but which ones do what? Is there just ONE that will increase the speaker volume and earpiece volume and do they also affect the ring-tone volume? I don't know how to compare them all. Can you help clarify please?
Click to expand...
Click to collapse
Download the files attached to my first post if you dont mind editing the registry. And add the CSV file into the windows folder. If you do not like to mess with the registry, then download my cab file attached to my post and it will install and if you dont like it you can uninstall it from remove programs.
Warlock as nice enough made a cab file, but looking at it seems to have changes in his, so as not to confuse anyone my set of files work. But remember you must install the AudioPara3_ATTMax in the windows folder of the phone.
hey angeldeath, i modified your cab file to include the audiopara file as well.
look on next page for volume cab
Thanks xredjokerx I didnt know how to do that LOL (Aint that sad?)
xredjokerx said:
hey angeldeath, i modified your cab file to include the audiopara file as well.
NOTE: THIS FILE IS THE SAME AS THE ABOVE FILE POSTED BY ANGELDEATH BUT WITH THE AUDIOPARA FILE ALREADY INCLUDED (it will install itself to the windows directory)
Click to expand...
Click to collapse
Thank you everyone, awesome work! Love it when great minds come together. Ill try this one first since these files are the ones that did the trick for me the first time. Any ideas on if i installed this cab, then installed warlock's second cab he posted? I think his first cab is just a mix of these files but his second cab is said to be different. Any ideas on that?
xredjokerx said:
hey angeldeath, i modified your cab file to include the audiopara file as well.
NOTE: THIS FILE IS THE SAME AS THE ABOVE FILE POSTED BY ANGELDEATH BUT WITH THE AUDIOPARA FILE ALREADY INCLUDED (it will install itself to the windows directory)
Click to expand...
Click to collapse
This cab doesnt seem to work. Just took a nap and woke up 20min late cus my device had no sound! I installed this cab, soft reset, now phone has zero sound when u adjust the volume with side hard keys in volume control, alarm clock, stuff like that theres zero sound!
Winner!
WarlockW said:
Made a cab of his settings for anyone that wants to try it ..
Increase Volume.cab
Also here is one that seems to work for me ..
Audio_FINAL1.0_PRO2.cab
Click to expand...
Click to collapse
tried the increase volume cab, soft reset, checked all sounds on device and all working perfect and much louder! Im not hard of hearing, just my work environment can be very loud at times and moving around a lot i dont always feel my phone vibrate so i need a loud ringer and very loud earpiece as well!
I also installed the second cab (audio_final), soft reset, tested all sounds and all working fine.
To warlock, whats the difference between the first cab u put together and the second cab? Is it best to install both as i did or use one or the other?
I would use just one ..
try it .. if it works great .. if not uninstall it.
try the other ..
if it works great .. if not uninstall it.
WarlockW said:
I would use just one ..
try it .. if it works great .. if not uninstall it.
try the other ..
if it works great .. if not uninstall it.
Click to expand...
Click to collapse
Sounds good. Was just curious if one did something the other cab didnt and if it would be better to install both to get the best of both worlds? Either way, greatly appreciate the work!
still confused!
I installed marcini.thinkblu-tilt2 vol increase.cab because it reduces the bassiness heard when the headset is connected as well as increasing the headset volume. But what exactly do these other CABS do? There's the handset earpiece volume, the speaker volume, the headset volume and the ringtone volume. What does what? And as one CAB posted here appears not to work, can someone produce an alternative or one CAB that does everything? Thanks for all your input. This is a necessary adjustment to an expensive phone that we can't hear.
The Cab warlock put up after me isnt my file, the reason is cause if you install his cab his cab points to a file that doesnt exist, thats why you would get no sound. My files (In my posts) will, cause the file name it refers to is also attached to my post. So I suggest you dont mix and match or your going to have many sound problems.
These files do the following (Under my posts)
Increase the Ear piece, increase the bluetooth earpiece and sound quality, and increase the ringer of the phone to better hear in a loud enviroment.
AngelDeath said:
reason is cause if you install his cab his cab points to a file that doesnt exist, thats why you would get no sound.
Click to expand...
Click to collapse
Just to correct you .. you are incorrect. yes it does ..
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev
\windows\AudioPara3_1MAX.csv
File: \windows\AudioPara3_1MAX.csv
All I did was change the name so it didnt over right any current files.
Anyway .. Use what works
< THEY ALL CAN BE UNINSTALLED>
HOLY CRAP THATS LOUD....
now i have to turn the volume down, otherwise blast out my ear drums... haha this thing is great!
can ya hear me now? YES!
deeznuts said:
This cab doesnt seem to work. Just took a nap and woke up 20min late cus my device had no sound! I installed this cab, soft reset, now phone has zero sound when u adjust the volume with side hard keys in volume control, alarm clock, stuff like that theres zero sound!
Click to expand...
Click to collapse
oof sorry, i changed the directory of where the file was installed to \Windows instead of %windows% and now all is fixed. sorry about your nap! RE-UPPED
also, beware of any damages that may occur if you raise the volume of any speaker. This is a disclaimer protecting myself, angeldeath and warlockw from any liability in case of any speaker damage. use at your own risk xD
(im using one too, so we're on the same boat if we sink)
WarlockW said:
Just to correct you .. you are incorrect. yes it does ..
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev
\windows\AudioPara3_1MAX.csv
File: \windows\AudioPara3_1MAX.csv
All I did was change the name so it didnt over right any current files.
Anyway .. Use what works
< THEY ALL CAN BE UNINSTALLED>
Click to expand...
Click to collapse
WarlockW Buddy, sorry I opened the cab but didnt see anything other then the reg entry, but the AudioPara3_ATTMAX.csv doesnt exist on any phone, but no problem, as long as everyone is happy is what counts.
xredjokerx,
Thanx for the Disclaimer
Related
Hey all,
Can somebody confirm that they have had the Uni working with the AKU_3.2 VGA files in the ftp site and jwright's 3.2 ROM?
I've been running the i-mate default ROM on VGA for almost a year now and decided to switch over to the new 3.2 ROM a few days ago. I don't use ozVGA but use the registry hack straight up with the VGA files and VGA system apps.
But for some reason, I can't get all my icons displaying. I've run sdkcerts countless times, hit the power button waiting for 5 seconds before soft resetting, done multiple reboots changing up the order of sdkcerts and vga file copying... I just can't seem to get it to display all the icons correctly.
I know that I'm missing my volume and my cel reception indicator on the top bar at the very least. I CAN see my wifi icons, clock and magic button icons. On another post I found somebody whose screenshot matched mine and the suggestion was to install the AKU_3.2 VGA files again. I've done that alot.
Any ideas would be appreciated. The Uni is significantly better at VGA.
Thanks.
Hmmmm, something strange is definitely going on... I've installed the original ozVGA cab now and even that has not worked. Same problem, it's not loading the top bar icons.... just like if I had not installed those 96dpi resource files into the Windows directory.
Can anybody confirm or deny that ozVGA works with the AKU 3.2 rom?
And mvrTrueVGA is the winner. Why it seemed to work and the other didn't is beyond me...
So I've compared all the files that mvrTrueVGA installs to the VGA files that are supplied in the AKU_2 zip. Essentially, they are all different (which honestly doesn't say much) but there are some interesting additions.
There are new files.
mismde.96.dll
trares0407.96.dll
Plus two interesting things. First off, I was using Total commander to search for all files that were *.96.*
It found two other files which had some interesting properties...
rires.96.dll -- this file I can see on my pocket pc but can't see it through activesync explorer
shellresapps.96.dll -- this file I can't copy from the PPC to look at it. Activesync complains that it cannot convert it.
Just some interesting info in my investigations.
Hi,
I wanted to try out VGA myself. Would it be too much to ask for a step by step instruction list for "beginers"? Attached files would also make it wonderful.
Thanks very much.
Me too wanna try vga with AKU 3.2 if it's totally safe .
www.jaml.com/MvRTrueVGA/
seems safe to me.
Been using it for a while.this is literally just a cab install, it even puts a toggle link in start>programs
pretty idiot-proof, Even I managed that one....
www.jaml.com/MvRTrueVGA/
seems safe to me.
Been using it for a while.this is literally just a cab install, it even puts a toggle link in start>programs
pretty idiot-proof, Even I managed that one....
there's also
http://www.aximsite.com/boards/showthread.php?t=136251&page=2&highlight=A12+OZVGA
as an alternative
fards said:
www.jaml.com/MvRTrueVGA/
seems safe to me.
Been using it for a while.this is literally just a cab install, it even puts a toggle link in start>programs
pretty idiot-proof, Even I managed that one....
there's also
http://www.aximsite.com/boards/showthread.php?t=136251&page=2&highlight=A12+OZVGA
as an alternative
Click to expand...
Click to collapse
Hey thanks.
The Power Settings and the Phone Applications are all mangle up though.
Backgrounds work through Pictures and Video.
cktlcmd said:
Hey thanks.
The Power Settings and the Phone Applications are all mangle up though.
Click to expand...
Click to collapse
You need xda-devs own VJ's vjBigPhone for phone issue...
http://forum.xda-developers.com/showthread.php?t=249642
Download from
http://www.vijay555.com/?Releases:VJBigPhone
Along with this post
http://forum.xda-developers.com/showpost.php?p=844841&postcount=48
Unfortunately I can't find the .cab files to save entering the registry keys manually.. The link on Vjs post are missing..
How often do you really need the Power screen?
Can nebody b nice enough to post their screenshots as b4 trying this i would like to see this already working fine on uni. ?
fards said:
You need xda-devs own VJ's vjBigPhone for phone issue...
http://forum.xda-developers.com/showthread.php?t=249642
Download from
http://www.vijay555.com/?Releases:VJBigPhone
Along with this post
http://forum.xda-developers.com/showpost.php?p=844841&postcount=48
Unfortunately I can't find the .cab files to save entering the registry keys manually.. The link on Vjs post are missing..
How often do you really need the Power screen?
Click to expand...
Click to collapse
Thanks for the tip. Yes, VJ's Phone app works like a charm. What is the purpose of the other link that you gave us with the registry changes?
It would be nice though for the power settings to be seen as normal as possible.
niketkumar said:
Can nebody b nice enough to post their screenshots as b4 trying this i would like to see this already working fine on uni. ?
Click to expand...
Click to collapse
I would post a screen shot for you, but my computer keeps crashing. I have to sort things out.
For all of your complaining about the messed up power and backlight exe's, check out this set of posts.
http://forum.xda-developers.com/showthread.php?t=250640
WARNING: Don't overwrite camera.exe, wlanmgr, or wmodem if you are using the AKU 3.2 ROM. It already has updated versions of these apps. I am only using the power, backlight and microphone mui's.
And please, please read the messages in the post on instructions of how to install them. It's right there in the first post so you don't have to read too far
Dan Feeny said:
For all of your complaining about the messed up power and backlight exe's, check out this set of posts.
http://forum.xda-developers.com/showthread.php?t=250640
WARNING: Don't overwrite camera.exe, wlanmgr, or wmodem if you are using the AKU 3.2 ROM. It already has updated versions of these apps. I am only using the power, backlight and microphone mui's.
And please, please read the messages in the post on instructions of how to install them. It's right there in the first post so you don't have to read too far
Click to expand...
Click to collapse
Thanks very much. I did not even notice those. Keep the suggestions coming. VGA seems better now even though it is still small.
I copied the files: power, backlight, and microphone mui's to my SD card ran them and got a nice looking files without distortion, I copied the files as suggested to the /Windows folder and did a soft reset. But if I access the power, backlight, and microphone through the Settings Tab, I still get the old distorted image. Is this the way it should be? Am I doing something wrong?
cktlcmd said:
Thanks for the tip. Yes, VJ's Phone app works like a charm. What is the purpose of the other link that you gave us with the registry changes?
It would be nice though for the power settings to be seen as normal as possible.
Click to expand...
Click to collapse
The registry links is to change the font size on the phone buttons.
cktlcmd said:
I would post a screen shot for you, but my computer keeps crashing. I have to sort things out.
Click to expand...
Click to collapse
No probs , I will wait.
cktlcmd said:
Thanks very much. I did not even notice those. Keep the suggestions coming. VGA seems better now even though it is still small.
I copied the files: power, backlight, and microphone mui's to my SD card ran them and got a nice looking files without distortion, I copied the files as suggested to the /Windows folder and did a soft reset. But if I access the power, backlight, and microphone through the Settings Tab, I still get the old distorted image. Is this the way it should be? Am I doing something wrong?
Click to expand...
Click to collapse
Did you run the .0409.mui exe first? Then copy to Windows? Then remove the trailing .exe from the .0409.exe files? It worked perfectly for me.
Dan Feeny said:
Did you run the .0409.mui exe first? Then copy to Windows? Then remove the trailing .exe from the .0409.exe files? It worked perfectly for me.
Click to expand...
Click to collapse
yep rename the files, get rid of the .exe on the end of the 409.mui one
Hi there,
I can't figure out how to change the regular/standard alarm sound to one of my own. I did manage to change the SMS sound to one of my own, so I thought that the procedure would be the same. Putting the mp3 in the \Windows directory, but that doesn't work.
I did see that all the alarm sounds are either .WMA or .WAV, so I changed my alarm sound to a .WMA and put it again in the \Windows directory, doesn't work either!!!
I have this personal wake up sound with my name in it and I'd like that to be my alarm sound, does anyone know how I can do that?
Where do I have to put the audio file?
Any help is much appreciated!
Rgds,
Albert
Edit: I just tried adding the .WAV audio and now I can see it in the alarm sounds, but when I chose my sound it just jumps back to the default sound, not letting me chose my personal sound. Oh this is so frustrating........I hope someone can help me......
you can try Pocket Wakeup... with it you can use mp3 files... it's so cool!
lobo81 said:
Hi there,
I can't figure out how to change the regular/standard alarm sound to one of my own. I did manage to change the SMS sound to one of my own, so I thought that the procedure would be the same. Putting the mp3 in the \Windows directory, but that doesn't work.
I did see that all the alarm sounds are either .WMA or .WAV, so I changed my alarm sound to a .WMA and put it again in the \Windows directory, doesn't work either!!!
I have this personal wake up sound with my name in it and I'd like that to be my alarm sound, does anyone know how I can do that?
Where do I have to put the audio file?
Any help is much appreciated!
Rgds,
Albert
Edit: I just tried adding the .WAV audio and now I can see it in the alarm sounds, but when I chose my sound it just jumps back to the default sound, not letting me chose my personal sound. Oh this is so frustrating........I hope someone can help me......
Click to expand...
Click to collapse
Your file can only be so long, not sure what the link is but shorten it, that should fix your problem
fabe-rza said:
you can try Pocket Wakeup... with it you can use mp3 files... it's so cool!
Click to expand...
Click to collapse
...or pTravelAlarm!
Thanks for the replies.
I'll give those 2 programs a try since I don't want to shorten my audio file......
It's 6-7 seconds long (don't really remember) and basicly it's a tune that says my name and tells me that's it's time to wake up.....hehe...
I'll let you guys know if I managed to fix my prob.....
Edit: Ok I just installed pTravelAlarm v2.7.3 and [MOD EDIT: Don't Mention WAREZ]
Now I've my mp3 file as my alarm......perfect!!
I couldn't find the pocket wakeup to download........I got this french site and it didn't work.....
but don't need it anymore........pTravelAlarm works great and I like the fact that it uses
big number and the stop and snooze buttons are big enough to push with the finger.
Thanks Athanaso77
lobo81 said:
Thanks for the replies.
I'll give those 2 programs a try since I don't want to shorten my audio file......
It's 6-7 seconds long (don't really remember) and basicly it's a tune that says my name and tells me that's it's time to wake up.....hehe...
I'll let you guys know if I managed to fix my prob.....
Edit: Ok I just installed pTravelAlarm v2.7.3 and found a serial for it and it works great!!
Now I've my mp3 file as my alarm......perfect!!
I couldn't find the pocket wakeup to download........I got this french site and it didn't work.....
but don't need it anymore........pTravelAlarm works great and I like the fact that it uses
big number and the stop and snooze buttons are big enough to push with the finger.
Thanks Athanaso77
Click to expand...
Click to collapse
Here it is the French.
Can you upload pTravelAlarm?
Cheers.
Thanks for the file!!
I tried to upload the cab file but I keep getting an error........I tried to compress (rar) the cab + keygen into 1 file but it says incorrect file or something like that.....
So here is the keygen for v2.7.3, just download it and use this keygen.
Grtz,
Albert
FIRST WARNING: WAREZ NOT ALLOWED.. NEXT TIME IS BANVILLE...
hi,
im using a 3.5mm heaphone jack adapter. but pluggin in my inear plugs is impossible because the lowest system sound and wmp sound is even too loud. using another player software would solve the music problem, but system sound and caller voice would still be too loud.
after searching some hours, i tried installing srs wow hd. only with all options down to 10%, loudness was acceptable, but the sound was crap and my hermes did not wake up from sleep.
now i have read about an audiopara.csv file in the windows directory in threads about other htc devices. no infos about the hermes and i cant finde the file (show all files option on in file explorer)
im using crcs latest rom.
any help appreciated.
chris
u should post this in CRC's thread instead of opening a whole new thread dude.
perhaps it is connected with the audio parameters, that serveral roms have cooked in. i don't know. as far as i can tell, its not a specific rom problem.
pcpc said:
perhaps it is connected with the audio parameters, that serveral roms have cooked in. i don't know. as far as i can tell, its not a specific rom problem.
Click to expand...
Click to collapse
it could be, allot of us don't use plug in head phones and it could require a driver that we excluded from newer build accidentally.. i wouldn't know.
joshkoss said:
require a driver that we excluded from newer build accidentally
Click to expand...
Click to collapse
i don't think its a missing driver.
im still curious if someone knows about the the audioparam file of the hermes. or perhaps someone could explain the audioparameters that can be cooked into a rom. perhaps they can be edited.
it's all registry.. under current user/control panel/notifications.. thats pretty much all i edit.
joshkoss said:
it's all registry.. under current user/control panel/notifications.. thats pretty much all i edit.
Click to expand...
Click to collapse
i didnt findt an option to control anything volume related.
i tried now a rom without "setacustics", still too loud on the last volume bar.
has anyone new ideas?
htc equalizer didnt help either. still too loud with all settings down.
tried nueAudio with an AudioPara.csv file i found in a Titan thread, that i moved into the windows folder. i also set a string ref in HKLM\Drivers\BuiltIn\WaveDev\AcousticFile to that file, as it was missing there too.
when i change all settings way down in nueAudio, after a softreset i still do not find any difference in the audio volume.
im really running out of ideas except an hardware volume control that i plug between the htc adapter and my headset ...
no ideas? anyone?
Is there an easy way to suppress the sound effects when using the camera?
Doh! Sorry - I just found it on the 2nd menu options page of the camera app...
Where? I'm blind?
Call me stupid, but I don't see the sound options in the Camera settings. I too am looking for a way to silence the camera sounds when taking pictures.
In the Camera settings, go to the Advanced Options. On the 3rd page is a "Shutter Sound" option.
Just a FYI
Hey there!
Well is you have the Telus version YOU ARE SCREW like me
the option is not there
but I found that if you call your voice mail and take picture at the same time, you will get the sound from \windows\shuttersound.wav witch is quiet compare to the rom one.
I did try to delete the file but it keep getting copy over after a softreset
good luck men
inspireqc said:
Hey there!
Well is you have the Telus version YOU ARE SCREW like me
the option is not there
but I found that if you call your voice mail and take picture at the same time, you will get the sound from \windows\shuttersound.wav witch is quiet compare to the rom one.
I did try to delete the file but it keep getting copy over after a softreset
good luck men
Click to expand...
Click to collapse
I have an unlocked device so I can disable the sound via the camera app settings. But for those of you who can’t, perhaps you can try messing with this registry entry:
HKLM\Software\HTC\Camera\General\DisableShutterSound
If it doesn’t work, place the unzipped attached file into your Windows directory. It’s just a blank wav file (created by opening Windows Sound Recorder and clicking “Save as” without doing anything).
If it still doesn’t work, then maybe you’ll need a wav file recorded with a second of silence…
Thanks but..
Thanks for the reply but that is not working.
I still wanna use the stock phone for now.. but one day I will jump the fence..
I did Try the registry change(S) .(went all through all the reg. to find out something else) deleting reg word and folders (not the greatest solution but i was trying...
had to hard reset 2 times.
I did try to install about 6 others HTC camera cabs..from tp hd etc custom software
I deleted the .wav file I did try to replace it with a silence file. but a soft-reset will re put it back
don't worry about it.. I did try and I FAILED
Canon ftw
inspireqc said:
Thanks for the reply but that is not working.
I still wanna use the stock phone for now.. but one day I will jump the fence..
I did Try the registry change(S) .(went all through all the reg. to find out something else) deleting reg word and folders (not the greatest solution but i was trying...
had to hard reset 2 times.
I did try to install about 6 others HTC camera cabs..from tp hd etc custom software
I deleted the .wav file I did try to replace it with a silence file. but a soft-reset will re put it back
don't worry about it.. I did try and I FAILED
Canon ftw
Click to expand...
Click to collapse
I will look for the reg setting but if you find it before I do then you can change the sound path from windows\shuttersound.wav to windows\none and that should work. when I find the reg setting I will make a cab for it. should be tonight but if not then I will post it in the am.
Ok here is the cab. Try it and let me know. It does not silence it totally but it only leaves a small click
Sorry ...
zelendel said:
Ok here is the cab. Try it and let me know. It does not silence it totally but it only leaves a small click
Click to expand...
Click to collapse
Hello HTC Friend,
I did try your Cab file ... and I still have the "Big" shutter sound + the CLICK from telus. I did try many others "cab file" to remove the shutter without success
The "work around" I found use the windows sound file but it really not a good solution to call your voice mail and then get your pic.. ( often too Late)
I did saw the windows\******* in the past (the reg changed was done) noting happen
It look Like TELUS overlap the "windows/HTC" camera function.
What really bugging me is That I CAN'T find the "occ/wav/mp3/midi/audio" file that generate the shutter sound (w/total commander or explorer)
Is it possible that the file would be hidden in The ROM ? and Can't be change unless you move to a custom rom ?
I "kinda" scare to change my rom .. I really depand on my phone.. ( no line at home and I need it to open the door of my App) So I really need something 101% working.
Thanks for you help
Just turn off the phone's sound before opening camera
sorry
bwnotredame06 said:
Just turn off the phone's sound before opening camera
Click to expand...
Click to collapse
Hello there
I think it was the first thing I did try
mute the sound or put it on vibration /mute all notifications
etc..
this is not working.
thanks
zelendel said:
I will look for the reg setting but if you find it before I do then you can change the sound path from windows\shuttersound.wav to windows\none and that should work. when I find the reg setting I will make a cab for it. should be tonight but if not then I will post it in the am.
Ok here is the cab. Try it and let me know. It does not silence it totally but it only leaves a small click
Click to expand...
Click to collapse
I tried the cab, but it does not work on my TP 2, which is the Australian version. I have tried to play around with many reg edits but nothing is changed. Somebody in the other forum managed to modify the camerarc.dll for the Touch HD and Touch Diamond, and it worked for those phones. I wonder if there has been a DLL modification for the Touch Pro 2 version as well?
You may check this thread on modifying the DLL file on ther HTC model to silence the sound.
http://forum.xda-developers.com/showthread.php?t=500777
Curious what other people's opinions are about the Tilt 2's in call volume? It seems a bit low at max volume and kind of muffled. I've been messing with registry hacks and the AudioPara3 files to see if I can make any sort of difference, but to no avail. Wondering if it's just my phone or not?
Nvm.. AudioPara files fixed it finally.
Phone shipped with the following AudioPara3 files:
AudioPara.csv
AudioPara3.csv
AudioPara3_ATT.csv
AudioPara3_ATT_10776_V2.csv
AudioPara3_TMO.csv
AudioPara3_Boot.csv
First off, your registry points to which CSV file to use...
\HKLM\Drivers\BuiltIn\WaveDev : AcousticFile
Mine was pointed to the ATT_10776_V2. Changed the registry to a few others but it didn't seem to make much of an improvement. The others on this thread said they had better volume quality with the original ATT. Went to their zip files and indeed, the ATT is different. Grabbed it, renamed it AudioPara3_ATT2.CSV and changed the registry key. Soft reset and much better!
Grab rockscientist01's files here:
http://forum.xda-developers.com/showthread.php?p=4455818#post4455818
You should change the topic to...
jinxey said:
Nvm.. AudioPara files fixed it finally.
Phone shipped with the following AudioPara3 files:
AudioPara.csv
AudioPara3.csv
AudioPara3_ATT.csv
AudioPara3_ATT_10776_V2.csv
AudioPara3_TMO.csv
AudioPara3_Boot.csv
First off, your registry points to which CSV file to use...
\HKLM\Drivers\BuiltIn\WaveDev : AcousticFile
Mine was pointed to the ATT_10776_V2. Changed the registry to a few others but it didn't seem to make much of an improvement. The others on this thread said they had better volume quality with the original ATT. Went to their zip files and indeed, the ATT is different. Grabbed it, renamed it AudioPara3_ATT2.CSV and changed the registry key. Soft reset and much better!
Grab rockscientist01's files here:
http://forum.xda-developers.com/showthread.php?p=4455818#post4455818
Click to expand...
Click to collapse
Hello there... you should change the topic to something like AT&T Tilt 2 Muffled / Broken Speaker ISSUE... (so more people can see it and come here)
just got mine yesterday and everything about the phone is great except the muffled / broken speaker sound during call... I'm going to try your solution right know... if it doesn't work... will return it first thing tomorrow... I have to set sound volume during call at half or even less so I don't get this broken speaker sound... I think mine is worst than yours...
anyone else with this issue?
thanks!
EDIT >>> Just tried a bunch of AudioPara3 files and the question is... which was the worst... This is a hardware issue... a huge hardware issue... I really don't think anything will solve this (unless another Tilt 2) any ideas anyone?
I'm having this problem as well. Sort of like someone is holding a pillow over the speaker.
http://forum.xda-developers.com/showthread.php?t=524655
Chrisd312 said:
I'm having this problem as well. Sort of like someone is holding a pillow over the speaker.
Click to expand...
Click to collapse
Hello there... just came back to the post to let you guys know that this issues are hardware related... sorry... but it is the reallity. Today I went back to AT&T and I returned the "muffled/broken speaker" phone... and I got another with 2 dead pixel's right in the freaking middle of the screen... I noticed it on the store and change it back again... and finally the 3rd Tilt 2 works flawless... ( and all 3 Tilts were opened by myself, not refurbish/used etc... so... the question is... is it just me with the worst luck on Earth... or the Tilts are actually having all sort of issues??? I upgraded from an HTC Tilt (the original) and that one is still rock solid and working great... so... anyone with issues with the new Tilt 2???
thank you...
same here, dont know if i just should go and replace it, did anyone try replacing and did they get anything better in return?
having similar things on tmo tp2.. i wish its software problem
I mixed and matched a bunch of audiopara files and came up with this one. Make sure you point the registry to it...
Remove the zip file extension.
what for is this?
found it.
http://forum.xda-developers.com/showthread.php?t=550784
this is for tmo tp2
i have such phone, will try to change audiopara
there is no a key pointing to csv file in that registry branch
muffled sound fixed(at least for me)
I'm a ATT tilt 2 user and couldn't hear anything, the sound was just horrible(muffled) I was about to return this phone, but i started doing some diggin and found this:
use this file attached, unzip it and place it in your \windows directory, and then go to:
HKLM\Drivers\BuiltIn\WaveDev\AcousticFile and point it to you new file, which is; \windows\AudioPara3_ATTMax.csv
and also modify those registry settings:
Increase voiceVolume:
Registry: HKCU\ControlPanel\SoundCategories\InCall
Key: AttenuationCategory
Default: 2
New Value: 1
Registry: HKCU\ControlPanel\SoundCategories\InCall
Key: InitVol
Default: 3
New Value: 7
this is exactly what i did and it worked for me, it nice crisp and actually little too loud now, but that's why you got your volume control on the side.
Please post results.
Worked for me! Thanks!
sorry if this is stupid question but I dont understand the direction about pointing the registry to the new file. Also in my registry there is a HKLM\Drivers\BuiltIn\WaveDev but there is no subfile under WaveDev called \AcousticFile. I have a tilt 2 with the energy rom
Finally works now!!! Good job.
Thank you!
ATT Tilt 2
marcini said:
this is exactly what i did and it worked for me, it nice crisp and actually little too loud now, but that's why you got your volume control on the side.
Please post results.
Click to expand...
Click to collapse
Seems to be working great on my Tilt2, thanks!
richk2 said:
sorry if this is stupid question but I dont understand the direction about pointing the registry to the new file. Also in my registry there is a HKLM\Drivers\BuiltIn\WaveDev but there is no subfile under WaveDev called \AcousticFile. I have a tilt 2 with the energy rom
Click to expand...
Click to collapse
manually create such string key putting a path into quotes
Improves the volume well, but still a little muffled sounding. It sounds fine, you can hear the other person, it's just different from what I'm used to. Maybe it's meant to be softer sounding...
could you be specific on how to manually create such a string key and putting it into quotes.I'm using mobile registry editor.
same question - how do you manually create a key string in registry editor