Encountered this yesterday with my BA.. The unit could not be turned on and I decided to do a reset. When I reset it, the unit would be stuck at the O2 logo screen and remain there forever..
Did a hard reset and then reinstalled my apps. After spending 4 hours on it, the unit refused to respond and I did a soft reset. After that, it got stuck at the boot screen again..
Just wondering if anyone had similar experiences with the BA and under these situations, is there anything that can be done to unfreeze the unit while still retaining the data in the machine? :roll:
Hi
try to upgrade ur rom ....
tell me what error u got!
Thanks
The ROM at that time was the latest version..there was no error..it was just stuck at the O2 screen..
Anyway..I did a hard reset and cleaned up the stuff that's not required..so far it seems quite stable. But i installed safemode as precaution..
HI all,
I'm having some fun and games with my Orbit today.
I previously had an old version of black & Blue on there. SO today decided to update to have a go with some manilla based ROMS.
First I Tried YuE_v11.3_3.15.20755_Lite_M2D_WWE
Which seemed to work ok but after a while applications were being very slow.
So then I tried to reflash oop, but that seemed to fail.
I Tried to flash love, but it wasn't ever getting to the progress indicator on flashing, so did an SD flash of YuE which worked.
So then tried to flash Love from that minimal YUE and the device is being really slow, like gets to the calibration and takes about 5 mins to swap between screens.
What's the best way to totally clear down the rom and start again on this?
Thanks
I've now flashed the Official UK O2 WM6 ROM and still having problems. Flashed succesfully, but when it boots up, it just sits on the "Windows Mobile" screen and beeps a bit
Current State after O2 flash :
IPL : 3.04.0001
SPL : 3.04.0000
GSM : 03.06.90
OS 3.4.0.0
Any help gratefully appreciated.
Thanks
Hard reset the device, and while you're in the config wizard, plug in your device and flash to new rom. That way it's completely formatted and you'll have a fresh new install... hope it works mate
I did a hard reset, still no joy, hangs on the welcome to windows screen
I can access the Bootloader, but can't find a way to flash a rom from there, all seem to want it done once you've made an activesync connetion
flash YUE back via SD card flashing
I already tried that, flashes fine, but becomes unresponsive soon after
have tried flashing O2 WM5 + WM6 from SD, but still no joy.
It just flashes, loads up WM(5/6) then hangs there, beeping sometimes. Pressing the green button brings up the calibration screen. I sometimes see bits of apps, today screen, but that's about it, it's generally unresponsive.
Any suggestions?
ta
A little update incase someone can help?
I left the battery out of the phone all night last night, and this morning the phone worked great.. for about 2 hours, then it froze. I hard reset, and it's back to freezing after OS loading now
What's up if you remove your MicroSD card ?
That makes no diff, i've tried flashing with + without the SD card (it's currently out), flashing from windows + flashing from microSD, all ends up the same way, with an unresponsive device once the OS boots.
Dear all,
I need help in repairing my Asus p525. I was trying to flash it to WM 6.1, but suddenly update failed. After that i started getting asus Blue Screen, and nothing more. I cannot hard reset, neither turn on the PDA. When I take out the battery, I can, by pressing CAM REC JOY and SOFT RESET button to get to USB loader.
I used USB loader and reinstalled my ROM and Boot Loader to Official Release of Asus. But this didnt help and I still get only Blue Screen, and after that nothing - unless I take out my battery for a while and return it.
Can anyone help me with this problem ?!
Greetings
New thing
Last night I took my battery out of the phone. Today I dont even have ASUS BLue Screen, but still i can, while holding the buttons, on reset (inserting the battery) to go into FORCE MODE.
Anyone know what to do ??
Today I reflashed with new roms, but it just dont work.
Greetings
I realised now, that when I charge the battery FULL, the phone starts working ?! First i have problem to calibrate the screen, and later on the OS start to work, and everything seems fine ?! But it resets, block..... hardware thing ?
2 days ago i was playing with my touch diamond and it held when i switched on WIFI (wifi was working fone for a year now). When i rebooted the phone froze at the screen where Touch Diamond is written and at bottom right some info regarding ROM/Radio/SPL etc (R 1.09.25.23 G 52.51.25.26H D 2.03.00.00).
Tried many times but couldn't boot it . Just when i was about to get hopeless it started booting if i hold volume down, enter and press reset pin on the screen still taking too long. As i had stock HTC ROM so i upgraded it to the latest to see if it solves the problem. After upgrade phone would still boot randomly by trying the Reset pin and the mentioned button but after a few trys that also stopped working.
Now the phone is stuck on the same black screen, i can only resintall the latest Rom and All the way mentioned on the forums dont work for me i have tried signed unsiged soft and hard spl or direct Custom ROM upgrades but nothing goes beyond 0 %.
All the SPL upgrade articles require to copy jump spl. exe to the phone but i can do that as i am unable to create a Active Sync relationship (Eventhough i have tried upgrade by manually going into the tri color screen by holding volume down button while booting it).
The Hard Reset option allows me to hard reset but has no effect on the phone's condition.
anybody who could help me out here?
Greetings All,
I had a very interesting problem happen to me and I would like to know if anyone else has experienced the problem before and what it could mean.
I went to restart my phone to boot into Android using GenY Dual Boot but after I had pressed the reset button the phone hung with a black screen and my LED circle constantly lit. Tried rebooting again and the phone did not want to know me however the circle went back to normal, it would get to the Touch Diamond screen where it will show you the ROM&Radio version on the bottom left and as soon as it got past that it would reboot and start the process again.
So I went and did a hard reset and still the phone would not boot. In the end doing a mtty flash, then a hard reset brought the phone back to life but now I am worried that there might be a underlying issue at play.
So my questions are:
What would cause the white ring to stay on?
Cause the phone to get stuck in a constant reboot?
Is there a problem with my phone that I need to get looked at?
Using the latest GenY D2X ROM with the HardSPL 1.93 and the radio 1.17. Just did a restart now and all is fine. Maybe it was a once off problem?
Thanks for any info .
/btw not sure what to search for hence the reason why i created a new thread.