Dear all,
I need help in repairing my Asus p525. I was trying to flash it to WM 6.1, but suddenly update failed. After that i started getting asus Blue Screen, and nothing more. I cannot hard reset, neither turn on the PDA. When I take out the battery, I can, by pressing CAM REC JOY and SOFT RESET button to get to USB loader.
I used USB loader and reinstalled my ROM and Boot Loader to Official Release of Asus. But this didnt help and I still get only Blue Screen, and after that nothing - unless I take out my battery for a while and return it.
Can anyone help me with this problem ?!
Greetings
New thing
Last night I took my battery out of the phone. Today I dont even have ASUS BLue Screen, but still i can, while holding the buttons, on reset (inserting the battery) to go into FORCE MODE.
Anyone know what to do ??
Today I reflashed with new roms, but it just dont work.
Greetings
I realised now, that when I charge the battery FULL, the phone starts working ?! First i have problem to calibrate the screen, and later on the OS start to work, and everything seems fine ?! But it resets, block..... hardware thing ?
Related
Desperately need help here! Tried to upgrade my ROM/Radio etc etc. It seems to have failed because i can't get the Universal to turn on now! Soft reset, Hard reset both have the same effect - basically the screen simply turns a horrible mix of green and red pixels. The unit freezes. Can't do a THING with it! HELP ME PLEASE!
I tried to upgrade my Qtek 9000 with last ROM and now I cant come over ALIGN SCREEN.It says align screen all the time.I didnt backup my old ROM.
Does anyone know, what to do?
Hi @l..
sorry if i have a double post
but, it think, it´s better in this level ;-)
I have B&B4.0 on my P3300. I have the problem, that it stuck on the second bootscreen. First time it happed, i resetet about 3 times, and then it works again.
Now my battery was out of power, so my Artems goes off.
Now i started it an it hang.. ok.. i thought thats normal.. but i did since yesterday about 40 soft resets!! And it ever stuck on Bootscreen.
But i don´t want to do a hard reset, because i need some files of the filesystem.
SO MY QUESTION:
is there any way to dump the rom from bootloader mode, or is there any way to get active sync running in bootloader mode, so i can go to the filesystem???
i need help
PLEASE!
thanxx 2 @ll
hi everybody..
i've got a serious problem..
here's the story..
i was trying to upgrade to the touch v7 by mr. gullum.
after downgrading my prophet to the no vendor id rom, i upgraded my device to the touch v7.
next i tried to hard reset my prophet, realised that i can't do it cuz my camera button is not working.
went to a phone repair shop and fixed the button..the solder was..loose? i mean, the thing was unconnected from the pcb.
fixed it and tried to hard reset again.
black screen of hard reset appeared, but when i released the comm button, it went straight to the white screen showing os ver and ipl, spl ver.
tried to hard reset again and failed, it entered the white screen where we can restore rom dumps..i immediately pressed the comm button and camera button again..and it started formatting the bnfs..thing?
still can't do hard reset, tried to flash the no vendor id again, and this is the problem..i get stuck on 95% and after that it jumps to 100% straight away.
tried to flash gullum's touch v7 but i got the message that no device detected...tried pv 5.0.0.0.5b, pv 4.00.0.6, nanoscopic all with same result...
anyone can help?
oh maybe this will help:
when i tried to flash the no vendor id again, what shows up is this..(see attachment) the from image version is blank..
on the 95% where i get stuck, the progress bar on my device turns red as when it happens on the 80%.
thank you, everybody...
progress..
hi there,
it's not that usual mistake people make..i think i've screwed my hardware too..
now, my previous problem was unable to hard reset because my camera button was not working..the solder was loose..
i've soldered it and the problem was after every succesful attempt to flash 'no vendor id' rom, it resets and goes to bootloader screen again (tricolor screen)..
late last nite, i tried to hard reset after succesful flash of 'no vendor id' rom (after it resets and enters the bootloader screen)..i succeeded to get into the black screen of hard reset but when i released the comm button, it went straight into the htc white screen without me being able to press any button at all..
everything went well though, and it went to the 'tap screen to set up your device'..at this point i tried to flash the 'nanoscopic' rom (last rom i use before i messed up this phone)..it went well!
after succesful attempt, i tried to hard reset again (no luck again), but after the htc screen shows up, the nanoscopic splash screen appeared!!!
whew, i thought i had my phone fixed already, but when i did a clear storage, it resets and enters into bootloader screen again! i tried soft reset via software and via manual way, and it enters the bootloader screen everytime!
now, i've fiddled some more and i now realise that just by pressing the comm button and doing soft reset can make me go into the bootloader screen..i'm guessing that the technician at the phone shop soldered wrongly...and now my comm button works as camera button too..
i think he accidentaly soldered some other button too to the comm button and that's why i always get into the htc white screen after i release the comm button in the black screen of hard reset..
i'm going to go back to the shop again after work today, but i'm still confused about the way my device enters bootloader after every reset (hard reset and soft reset)..
a friend gave an opinion that maybe, like in desktop, (there's the bios then there's the operating system), the 'bios' of my device is ****ed up?
any help greatly appreciated!
Hi all,
I am running the meschle Artemis Touch ROM 4.1 and I am trying to change to an ealier version of meschle ROM (When I upgraded to that ROM I ran from step1 and my device has always been Super CID). I tried both directly from step2 or step1 but neither worked. When it gets to the boot loader mode (where there should be tri colors) it is displaying white blank screen.
This happens even if I hold down the voice button and press reset via stylus which suppose to go into boot loader mode. So now I cannot change to other ROM without the tri colors boot loader!! I am kind of stuck now. Is there anything I can do to resolve this problem, by reinstalling thing or something like that?
Any suggestion will be really appreciated!
Problem resolved!!!!
I have just managed to resolve the boot loader problem!!!!!!!!!!!!!!!!
I turned it off, took the battery out, took the SDHC card out and put the battery back, power it back on and the boot loader works!!!!!!!!!! So something in that process has resolved the problem.
Thanks anyway.
Thank you very much. I had the same problem. Now im good
many thanks for your advice
oh man , i have spent 3 full days searching a solution for the white screen during upgrading & finally i find it because of SDHC card , now i can upgrade whatever i want
Thanksssssssssssssssssssssssssssssssssssssssssssssssssssssssss
Malik Chaabane
2 days ago i was playing with my touch diamond and it held when i switched on WIFI (wifi was working fone for a year now). When i rebooted the phone froze at the screen where Touch Diamond is written and at bottom right some info regarding ROM/Radio/SPL etc (R 1.09.25.23 G 52.51.25.26H D 2.03.00.00).
Tried many times but couldn't boot it . Just when i was about to get hopeless it started booting if i hold volume down, enter and press reset pin on the screen still taking too long. As i had stock HTC ROM so i upgraded it to the latest to see if it solves the problem. After upgrade phone would still boot randomly by trying the Reset pin and the mentioned button but after a few trys that also stopped working.
Now the phone is stuck on the same black screen, i can only resintall the latest Rom and All the way mentioned on the forums dont work for me i have tried signed unsiged soft and hard spl or direct Custom ROM upgrades but nothing goes beyond 0 %.
All the SPL upgrade articles require to copy jump spl. exe to the phone but i can do that as i am unable to create a Active Sync relationship (Eventhough i have tried upgrade by manually going into the tri color screen by holding volume down button while booting it).
The Hard Reset option allows me to hard reset but has no effect on the phone's condition.
anybody who could help me out here?