2 days ago i was playing with my touch diamond and it held when i switched on WIFI (wifi was working fone for a year now). When i rebooted the phone froze at the screen where Touch Diamond is written and at bottom right some info regarding ROM/Radio/SPL etc (R 1.09.25.23 G 52.51.25.26H D 2.03.00.00).
Tried many times but couldn't boot it . Just when i was about to get hopeless it started booting if i hold volume down, enter and press reset pin on the screen still taking too long. As i had stock HTC ROM so i upgraded it to the latest to see if it solves the problem. After upgrade phone would still boot randomly by trying the Reset pin and the mentioned button but after a few trys that also stopped working.
Now the phone is stuck on the same black screen, i can only resintall the latest Rom and All the way mentioned on the forums dont work for me i have tried signed unsiged soft and hard spl or direct Custom ROM upgrades but nothing goes beyond 0 %.
All the SPL upgrade articles require to copy jump spl. exe to the phone but i can do that as i am unable to create a Active Sync relationship (Eventhough i have tried upgrade by manually going into the tri color screen by holding volume down button while booting it).
The Hard Reset option allows me to hard reset but has no effect on the phone's condition.
anybody who could help me out here?
Related
hi everybody..
i've got a serious problem..
here's the story..
i was trying to upgrade to the touch v7 by mr. gullum.
after downgrading my prophet to the no vendor id rom, i upgraded my device to the touch v7.
next i tried to hard reset my prophet, realised that i can't do it cuz my camera button is not working.
went to a phone repair shop and fixed the button..the solder was..loose? i mean, the thing was unconnected from the pcb.
fixed it and tried to hard reset again.
black screen of hard reset appeared, but when i released the comm button, it went straight to the white screen showing os ver and ipl, spl ver.
tried to hard reset again and failed, it entered the white screen where we can restore rom dumps..i immediately pressed the comm button and camera button again..and it started formatting the bnfs..thing?
still can't do hard reset, tried to flash the no vendor id again, and this is the problem..i get stuck on 95% and after that it jumps to 100% straight away.
tried to flash gullum's touch v7 but i got the message that no device detected...tried pv 5.0.0.0.5b, pv 4.00.0.6, nanoscopic all with same result...
anyone can help?
oh maybe this will help:
when i tried to flash the no vendor id again, what shows up is this..(see attachment) the from image version is blank..
on the 95% where i get stuck, the progress bar on my device turns red as when it happens on the 80%.
thank you, everybody...
progress..
hi there,
it's not that usual mistake people make..i think i've screwed my hardware too..
now, my previous problem was unable to hard reset because my camera button was not working..the solder was loose..
i've soldered it and the problem was after every succesful attempt to flash 'no vendor id' rom, it resets and goes to bootloader screen again (tricolor screen)..
late last nite, i tried to hard reset after succesful flash of 'no vendor id' rom (after it resets and enters the bootloader screen)..i succeeded to get into the black screen of hard reset but when i released the comm button, it went straight into the htc white screen without me being able to press any button at all..
everything went well though, and it went to the 'tap screen to set up your device'..at this point i tried to flash the 'nanoscopic' rom (last rom i use before i messed up this phone)..it went well!
after succesful attempt, i tried to hard reset again (no luck again), but after the htc screen shows up, the nanoscopic splash screen appeared!!!
whew, i thought i had my phone fixed already, but when i did a clear storage, it resets and enters into bootloader screen again! i tried soft reset via software and via manual way, and it enters the bootloader screen everytime!
now, i've fiddled some more and i now realise that just by pressing the comm button and doing soft reset can make me go into the bootloader screen..i'm guessing that the technician at the phone shop soldered wrongly...and now my comm button works as camera button too..
i think he accidentaly soldered some other button too to the comm button and that's why i always get into the htc white screen after i release the comm button in the black screen of hard reset..
i'm going to go back to the shop again after work today, but i'm still confused about the way my device enters bootloader after every reset (hard reset and soft reset)..
a friend gave an opinion that maybe, like in desktop, (there's the bios then there's the operating system), the 'bios' of my device is ****ed up?
any help greatly appreciated!
Hi there, i got hold of a Hermes yesterday and since that moment i've been trying to flash it to a decent wm6.1 rom.
but i ran in some problems.. first i flashed HardSPL 7. then i flashed the radio to 1.4x and even 1.5x and some roms. the last ROM i tried is the latest TNT.
but for some reason i keep getting crashes, missing shortcut links and when i reboot at that moment it keeps stuck at the bootscreen picture. this happened serveral times now and its getting on my nerves..
i already used MTTY with the info 8 command. and it only returned some "Reversed" blocks, none were bad.
Can someone please tell me if i am doing something wrong? or how i can solve the issue?
i already tried leaving it be for 5 minutes, remove battery, and did like 30 hard-resets already..!
help?
happened to me once
have you done a manual hard reset? at least i think thats what its called. where you hold both soft keys(ones above start/ok) and press the button in with your stylus all at one time till the white reset screen comes up..then just press R and SPACE on the keyboard.
now once it reloads and is finally done...flash vg3's at&t wm6 rom..once its all done flash your 6.1 rom of your liking..
its something to do with the memory i dunno but i just flash vg3's at&t wm6 rom every single time before i flash to another 6.1 rom and i've never had that happen to me again and trust me it happened a lot before..it never happens now
Yes i did do the hard-reset manually.
i will try the vg3's rom first thing tommorow.
HI all,
I'm having some fun and games with my Orbit today.
I previously had an old version of black & Blue on there. SO today decided to update to have a go with some manilla based ROMS.
First I Tried YuE_v11.3_3.15.20755_Lite_M2D_WWE
Which seemed to work ok but after a while applications were being very slow.
So then I tried to reflash oop, but that seemed to fail.
I Tried to flash love, but it wasn't ever getting to the progress indicator on flashing, so did an SD flash of YuE which worked.
So then tried to flash Love from that minimal YUE and the device is being really slow, like gets to the calibration and takes about 5 mins to swap between screens.
What's the best way to totally clear down the rom and start again on this?
Thanks
I've now flashed the Official UK O2 WM6 ROM and still having problems. Flashed succesfully, but when it boots up, it just sits on the "Windows Mobile" screen and beeps a bit
Current State after O2 flash :
IPL : 3.04.0001
SPL : 3.04.0000
GSM : 03.06.90
OS 3.4.0.0
Any help gratefully appreciated.
Thanks
Hard reset the device, and while you're in the config wizard, plug in your device and flash to new rom. That way it's completely formatted and you'll have a fresh new install... hope it works mate
I did a hard reset, still no joy, hangs on the welcome to windows screen
I can access the Bootloader, but can't find a way to flash a rom from there, all seem to want it done once you've made an activesync connetion
flash YUE back via SD card flashing
I already tried that, flashes fine, but becomes unresponsive soon after
have tried flashing O2 WM5 + WM6 from SD, but still no joy.
It just flashes, loads up WM(5/6) then hangs there, beeping sometimes. Pressing the green button brings up the calibration screen. I sometimes see bits of apps, today screen, but that's about it, it's generally unresponsive.
Any suggestions?
ta
A little update incase someone can help?
I left the battery out of the phone all night last night, and this morning the phone worked great.. for about 2 hours, then it froze. I hard reset, and it's back to freezing after OS loading now
What's up if you remove your MicroSD card ?
That makes no diff, i've tried flashing with + without the SD card (it's currently out), flashing from windows + flashing from microSD, all ends up the same way, with an unresponsive device once the OS boots.
FIXED NOW!
Need help.
I burned the new Kavana ROM. everything was working ok.
placed my microSD and the device didn't recognize it, so i rebooted.
upon reboot the device got stuck on the white HTC screen.
pulled battery
tried again, rebooted, past the HTC screen to the Windows Mobile welcome screen but freeze again. hard reboot didn't respond.
pulled battery, then turned back on. device didn't even turn on!
tried several times with/without battery hooked up to power , and with/without SIM and/or microSD (all possible combinations) and nothing.
had lunch
went back to it and the device magically booted it but after the white HTC screen i got a blue screen asking about error from last reboot. said yes to correct. rebooted went past white HTC and into Windows mobile welcome screen and froze again.
repeated the process several times and finally got to the blue screen again asking about error from last boot, this time said 'no' and device continued boot in a white screen without HTC logo and froze.
all hard reset attempts were unsuccessful (if i'm doing it right: hold two soft keys and then power button).
now the device boots to the white HTC screen and then is stuck.
what to do?
edit: got the hard reset to work and reconfigured my phone. i only noticed the black screen for a split second because my Dash has issue that it thinks that the green send button is being pressed all the time (anyone know how to fix that?).
Thanks
Find your original rom in sticky, go into bootloader and flash original rom, then flash to wm6.1.
have the same issue!!... did you fixed? the main problem is activesync is not running so how do i install another ROM?
Active sync doesnt have to be working aslong as u got ur s621 pluged in and u wait for a few seconds before starting the ROM it will work.
Greetings All,
I had a very interesting problem happen to me and I would like to know if anyone else has experienced the problem before and what it could mean.
I went to restart my phone to boot into Android using GenY Dual Boot but after I had pressed the reset button the phone hung with a black screen and my LED circle constantly lit. Tried rebooting again and the phone did not want to know me however the circle went back to normal, it would get to the Touch Diamond screen where it will show you the ROM&Radio version on the bottom left and as soon as it got past that it would reboot and start the process again.
So I went and did a hard reset and still the phone would not boot. In the end doing a mtty flash, then a hard reset brought the phone back to life but now I am worried that there might be a underlying issue at play.
So my questions are:
What would cause the white ring to stay on?
Cause the phone to get stuck in a constant reboot?
Is there a problem with my phone that I need to get looked at?
Using the latest GenY D2X ROM with the HardSPL 1.93 and the radio 1.17. Just did a restart now and all is fine. Maybe it was a once off problem?
Thanks for any info .
/btw not sure what to search for hence the reason why i created a new thread.