please any help you can give will be brilliant. i tried falshing it with another rom but my battery died half way through the process and now my mda will only work on the mains supply (not even by a powerd usb hub) when i check under the setting option power it say the battery status is unknown i have another battery monitering application on the device know as batti but even that cannot detect the battery. it does flicker when it is not on the mains but won't hold a stable power i have tried to get it into the boot loader screen but it will only do that via the mains. i have checked the registry on the devicxe it says that there is a battery driver present but i do not know whether it is the correct one. is it possible to flash the rom via an sd card or via any alternaticve means or is there another way i can get my device to realise that it does actulally have a battery also could you please send me registry values for the battery to confirm the entries i have are correct. thank you in advance
I have the same problem, did you manage to get this fixed and if so how?
Related
Hey guys,
I've searched the forum for like 5 hours or so
to find a thread that could help me solve this solution...
I've tried everything that had something to do with "dead"
in the BlueAngel and Blueangel Update etc. section
What it does:
- The screen stays black
- If I try to charge, the Red 'Charging' LED doesn't become red
unless I take the battery out of the Qtek and charge..
Then it gets red (WEIRD)
- No connection with activesync or rom update utilities
What happened:
- Rom update stopped after a few percentages...
If i try to get a new rom in it with or without cradle
with the following rom update utilities:
- BaUpgradeUt.exe:
then I get a Connection Error (101) when I try to update
- MaUpgradeUt_noID.exe:
ERROR 150: ROM UPGRADE UTILITY ERROR
(Rom Utility not designed for this device)
or "Finished" immediately (but it's not finished)
(Depends on the rom I use, and I used like 10 different roms)
Soft reset / Hard reset doesn't work,
I even tried to Hard Reset by holding the
Voice Record button + Power button + Reset button for 2 minutes
(I tried Camera + Power + Reset too) with the battery,
and I tried these without the battery...
No reaction...
If someone can help me, please do...
Thnx in advance
Maybe you can try thingds from this
http://forum.xda-developers.com/viewtopic.php?p=291989#291989
sep said:
Maybe you can try thingds from this
http://forum.xda-developers.com/viewtopic.php?p=291989#291989
Click to expand...
Click to collapse
Nope,
I've tried that too, but I don't get the USB or WCEUSB in mtty...
The COM ports don't react.
I know how to use it, because I used it like 10 times or somethin'
But I think the problem is, that I can't get in the bootloader mode
(or any other mode)... So there's no response from my Angel..
Thanks anyway..
have you tryed to remove battery, leave it without battery fo an hour or two then put the battery back and power on the device ?
this method may boot your device. If it worked go imediately in bot loader mode and reflash your favorite rom
If it does not helps maybe it is hardware problem ... and you should leave your device in service center
Tried this too
Isn't there any solution except for service center?
I want to know how I can solve this problem,
'cause it could happen again when I update the rom later.
And I know I'm not the only one with this problem.
It would help me and a lot of other BlueAngel owners..
Is it possible to make a serial connection with the bottom I/O port and issue the necessary commands with mtty? could be that there is some logic powered on the board but not enough to make the "USB" section powered up.. similar to serial a console cable on network gear etc. OR.. is there any known secrets such as a hardware debug mode initiated with certain pin(s) on the I/O connector.. such as grounding one or two.. any HTC tech documents floating around for troubleshooting?
You are not one with this problem. The same happens with me too.
Let searching for solution together.
If you want you can contact with me by icq: 190812766
Any help would be great....
I have a MDA Compact III issue when trying to upgrade to the ARTEMIS TOUCH 2.1 or 2.0 software
Unfortunatly, my pda was at 49% charge when i first tried, so stage one got to the end, then told me to charge my fone more and ended.
Thus i charge the fone to 75% and re-started. However, upon reconnecting the fone to commence the restart, the USB device was not recognised.
After removing the Active Sync and indeed the USB Driver from the PC and re-installing it, the conenction was re-established, however, it now often drops the connection. Plugging away, i tried the install Step 1 once more, and upon getting to 100% in the cmd part, and then progressing through the wizard, whereby the PDA displayed the progress bar reachinbg 100% (of the unlock stage) the PDA then reboots, and the connection is lost...and doesnt re-establish itself....and then the wizard reports Error [270] : Update Error The image file is corrupted. Please check your update Utility
Now, i have tried various sources for the software, and indeed tried both 2.0 and 2.1.....
Now i have a PDA that intermittantly drops its USB connection (and needs the USB removed and re-added on the PC) and is now slower than it was, plus never got to step 2 to get the software on iot.....
Can anyone help? Else i have a broken phone so to speak.....
Thanks alot in advance
Paul
paulcharles1 said:
Any help would be great....
I have a MDA Compact III issue when trying to upgrade to the ARTEMIS TOUCH 2.1 or 2.0 software
Unfortunatly, my pda was at 49% charge when i first tried, so stage one got to the end, then told me to charge my fone more and ended.
Thus i charge the fone to 75% and re-started. However, upon reconnecting the fone to commence the restart, the USB device was not recognised.
After removing the Active Sync and indeed the USB Driver from the PC and re-installing it, the conenction was re-established, however, it now often drops the connection. Plugging away, i tried the install Step 1 once more, and upon getting to 100% in the cmd part, and then progressing through the wizard, whereby the PDA displayed the progress bar reachinbg 100% (of the unlock stage) the PDA then reboots, and the connection is lost...and doesnt re-establish itself....and then the wizard reports Error [270] : Update Error The image file is corrupted. Please check your update Utility
Now, i have tried various sources for the software, and indeed tried both 2.0 and 2.1.....
Now i have a PDA that intermittantly drops its USB connection (and needs the USB removed and re-added on the PC) and is now slower than it was, plus never got to step 2 to get the software on iot.....
Can anyone help? Else i have a broken phone so to speak.....
Thanks alot in advance
Paul
Click to expand...
Click to collapse
well, I'll just try to give you some suggestions as I don't know much about MDA Compact III ,it does not fall in the category of wizard,it's a Magician device and I'm a wizard k-jam user. anyhow as a general of upgrading is to have your battery fully charged or atleast must have more than 70% charge.cuz during flashing in RUU upgrade mode,it does not charge,so if while during flash something goes wrong or it takes more time to flash,it shud have enough power to go through the whole process.if it does not have enough power to complete the process,it fails to flash properely and thus have a bad flash creating problems.so same has happened with u, you have a bad flash
well in wizards we have certain methods to revive the device or recharge the battery,i have no idea about your device,but can only suggest get the battery charge,secondly your usb connectivity problem is also due to the bad flash,cuz as there is no OS info on the device,it wont be able to establish the connection,which windows are you using,try to upgrade with winxp sp2 and active synchronize ver 4.5
as i have no idea about Magician upgrading method so wont comment further,but advise you to look in the below thread,it might be helpful,cuz its about Magician MDA Compact III
As your posting in the wring forum you might not get much help here,ok
http://forum.xda-developers.com/forumdisplay.php?f=276
good luck
thanks
thanks for the reply. Got it working - used 2.0 to unlock it, and 2.1 for the actual rom upgrade...
Well, it seems, i'm having a big problem:
i wanted to upgrade my fresh MDA Pro to WM6.1 as i wanted to have SDHC-Support and didn't find any really working one with WM5. But: I DIDN'T FULLY Charge the battery, so i received an error as the device couldn't flash the ext-rom. I can still enter the factory-reset-screen. Is the battery going to charge there, too?, so that i can just wait and wait, ultill the battery is going to get full and reflash?
Well, in short:
Wanted to upgrade my device, it failed (maybe due to low battery)
I can still enter the hard-rest / "reset to facory defaults"-screen
if i press any button therem (ie 0 or X) the battery-led links red short and nothing happens.
tried entering bootloader, but nothing happened exept for the battery-ed short red blinking.
does the battery keep charging in the "reset to defaults"-screen?
is it possible to flash this device via SD-Card?
WELL - FIXED IT MYSELF, i was able to enter the ootloader and exectue the task 28at mtty, so i went back to original rom!!
thanks for the info with the tasks and mtty-tutorial
tw, i tried around with the SDHC-Drivers / Files, but didn't find any really working. Which driver works on 8G SDHC Class6-Card?
Hi, I have a problem.
My iPaq 114 hangs on the Windows Mobile 6 green boot screen.
I've tried to hard reset, it said "CLEAN BOOT", but that doesn't work. I've tried about 10 hard resets, all the same.
I've then tried using the SP38871 package to update the ROM, but the program tells me there is no connection between the iPaq and my PC.
Then I've found that if I push the Calendar+OK and tap the reset, it goes into a "SDCard Download Image" so I've copied the "HPImage.nbf" file from the SP38871 package, placed it on an SD Card, but then it says: "No download file found"
It's also acting weird, meaning that it does not start when I push the power button, only when I tap the reset (does that mean Windows Mobile boots, but then the whole screen turns black?)
I've uploaded a video to show you what I mean.
http://www.youtube.com/watch?v=I-jeOyB97Qs
What could be the problem ? Could someone please help !
EDIT: I wrote the ROM file (HPImage.nbf) using ntrw.exe, but the iPaq says: "No boot block!" ... Does anyone have a good ROM ? Or if someone has a working iPAQ 114, could you please make a ROM backup and send it to me ? Or paste the HEX ROM Header. Just follow this guide:
http://www.rawen69.cc/hw65xx_flash.html
Ok..... it seems I`m having charging problems...
I thought the battery was full, because the orange light did not come up.... Then, after playing with it a bit more, I notice that it charges only if I take out the battery, put it back in, and the connect it to USB or charger... When I start the device, it does not charge anymore.
Also, I've found that my PC can't even connect with it, eventhough it's running. Could it be the mini-usb connector ? Or maybe the internal ipaq battery ?
I've tried 2 USB-to-miniusb cables, and same symptoms on both of them...
Hi Kiraly,
Hmm, sometimes Devices from HTC is not charging if you into boot loader Modus. that´s the reason why you must always a charged battery before you flashing a new OS.
Do you try: Windows+OK+Audiorecording (button on right side) hold it, make a Reset with you pen and hold the 3 buttons?
start your device normally again?
When your battery is dead:
we have sometimes same Problem, if the IPAQ 114 not used for more then one Month, the battery is deep discharged. Sometimes there is no chance to reactivate the battery. (Same problems we have some years ago with the HTC Wizard too)
I solved that problem with a External (laboratory) Power Supply ( I pushed the + and - contacts of the battery (not mounted into your PDA) really shortly with 12 Volt and maybe fixed current of 1 Ampere.
But this is really dangerous, do that only (if the battery not working or will not charging) for a few seconds. (max 2 x 5 seconds with a short interval between the 5 seconds)
remember that LiIo Batteries can really dangerous.
After this procedure the Battery will charging again. Sometimes it can help too, to leave your PDA connected to PC or Power Adapter for one night.
stuck in RUU download mode
hi,
i've try to update my ipaq 114, but unfortunately i stuck in RUU download mode, i can't do any progress, hardreset is not working..
please help, thx
joy.d said:
Hi Kiraly,
Hmm, sometimes Devices from HTC is not charging if you into boot loader Modus. that´s the reason why you must always a charged battery before you flashing a new OS.
Do you try: Windows+OK+Audiorecording (button on right side) hold it, make a Reset with you pen and hold the 3 buttons?
start your device normally again?
When your battery is dead:
we have sometimes same Problem, if the IPAQ 114 not used for more then one Month, the battery is deep discharged. Sometimes there is no chance to reactivate the battery. (Same problems we have some years ago with the HTC Wizard too)
I solved that problem with a External (laboratory) Power Supply ( I pushed the + and - contacts of the battery (not mounted into your PDA) really shortly with 12 Volt and maybe fixed current of 1 Ampere.
But this is really dangerous, do that only (if the battery not working or will not charging) for a few seconds. (max 2 x 5 seconds with a short interval between the 5 seconds)
remember that LiIo Batteries can really dangerous.
After this procedure the Battery will charging again. Sometimes it can help too, to leave your PDA connected to PC or Power Adapter for one night.
Click to expand...
Click to collapse
Unlike other ipaqs, the 111 and 211 (and their varients) were not made by HTC. They were made by Foxconn. As for your problem, what filesystem is your SD Card formatted. Try formatting it with the FAT-16 file system (if you format the card with the standard windows utility, choose FAT) first, and then putting the image on the card. You might also need a file called BLDIAG.nb0 (search around for that one). Did you ever think to check out the ipaq 211 (or 210) threads to see what they did?
hp 114 stuck in Flash or ruu mode
this happened to me also. To resolve this... download the HP rom up date for hp 114 in hp.com. You should never install this using vista... find a computer with XP OS download corresponding MCDC from microsoft so that XP would be able to recognize your PDA. Then run the spxxxxx (rom update) from your computer...
The upgrade process will take about 7 min. but sadly this does not solve frequent hanging and loss of data by WM6 that is why I am looking around to software updates. Still no luck...
I have made a really stupid mistake
i have changed my product code to 8600 a few days ago
and really forgot about it
http://forum.xda-developers.com/showthread.php?t=1333956&highlight=code
i was trying to flash my phone as I did many times before
using 1.2 ver
when I got to dbl.mbn - boot files
muliloader (ver 5.65) got an error - security fail
and then nothing
black screen
no download mode - in any condition
no battery icon - when the cell is connected to power adapter
no response from usb when I connect to pc
kies of course cant see my cell
only black screen
any advice ?
10x in advance
no download mode - in any condition
Click to expand...
Click to collapse
Before you are sure... Bootloader is dead...
1.
Remove battery for few minutes
2.
Be 100 % sure your battery is NOT empty...
Good luck.
Btw.:
I saw this error often in posts from other users... maybe this has nothing to do with Product Code...
Often between bada 1.x and 2.0 change or Bootloader change general...
Best Regards
yes donot worry
just remove the battery and put it back and try to go to download mode directly
best regards
its verry problematique if you dont have another battery cause now you cant recharge it.
Then there's trick what you can do.
Im serious i do it but be carrefull..
We know wave recharge white usb and usb its 5volt then try to find other recharge you dont use it and cut the positive and negative lead then look on battery put in to recharge it directly 1 or 2 min then you can flash the important bootfiles to rc1 first
Send from Wave S8530
Thank you all for support
but the problem is not in the battery
I never flash my cell - if I dont have at least 80% power of the battery
I think it is something with the change of the product code ( I have changed to 8600)
and error of security I got - in the dbl.mbn
If you dont have any magic trick to offer , then my phone is dead (Jtag or riff box at least )
me any my curiosity
if you arre good at soldering and such you could try the
unbrickablemod
if the phone seal still intact,
go to samsung service center.
they will give you a new phone.