OOps.....REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING
now my dopod is only bootloader screen.
plug in usb cable but not appear "usb" ... only " serial "
i try hard reset. and phsh "0" ..cleaning now...
but appear bootloader screen..
plz help me...!!!!
how can i fix problem ?
Try reinstalling the firmware
Related
Helmi's AKU 3.5 ROM was installing at that time and it was interupted by a 101 connection error. I disconnected the Universal from the USB and I was seeing the bootloader screen where it only shows Serial and 1.00. I tried to press the reset button. It still went back to the bootloader screen where it shows serial and 1.00. Next i tried to hard reset the device by pressing - & - & reset. I was given two options of 0 & X. First time i tried X and it still went back to Serial and 1.00 bootloader screen. Then i tried to hard reset again and this time i selected 0, it cleared the device and it went back to the bootloader screen. . Then i tried installing Helmi's ROM again. Well it wouldn't work because the USB mentioned it as an unknown device. I tried mtty but mtty wouldn't list a USB port in the dropdown list. All i saw was COM ports. Next i tried it on another computer and it still would not work. Tried to update the bootloader but same 101 device not detected problem.
reflash your bootloader
Oh nvm this thread post. I got it fixed. It was my USB cable that was faulty. All the pins in the USB cable were not hitting all the pins USB port. I used another USB cable and it works now. I guess this post helps all zombies like me.
I have tried to flash a JasJar with the JASJAR_WWE_21208_212010_11500 files. I connected the Jasjar and started the update. After the Jasjar restarted he got stuck in the "USB v1.00" mode. I have tried to remove the battery and to reset it but as soon as i switch it on it just goes back to "USB v1.00" or serial v1.00
The computer does not recognize nor connect to it naymore.
Any ideas waht to do?
dosada said:
I have tried to flash a JasJar with the JASJAR_WWE_21208_212010_11500 files. I connected the Jasjar and started the update. After the Jasjar restarted he got stuck in the "USB v1.00" mode. I have tried to remove the battery and to reset it but as soon as i switch it on it just goes back to "USB v1.00" or serial v1.00
The computer does not recognize nor connect to it naymore.
Any ideas waht to do?
Click to expand...
Click to collapse
hello my friend ithink you stuck on boatloader please se related theards and posts
dont forget to take a look at wiki
if your problem dosen't solve continue this theard
Hi, i have thought it would be the boot loader mode too so i have had a look at some topics regarding that. When i try camera+reset+power it does not help. When i try to flash the unit with ranju-v76 it does find a problem but when it tries to recover it vista just says that the program has craches.
Any ideas waht to try or how exactly?
Thanks
dosada said:
Hi, i have thought it would be the boot loader mode too so i have had a look at some topics regarding that. When i try camera+reset+power it does not help. When i try to flash the unit with ranju-v76 it does find a problem but when it tries to recover it vista just says that the program has craches.
Any ideas waht to try or how exactly?
Thanks
Click to expand...
Click to collapse
Hi,
Bootloader combination key is Backlight + Power + Reset.
1] Make sure you connect the USB cable to main USB port on computer and
not the USB extesion / hub.
2] Remove any SD card you may have inserted in the card slot
3] try to flash again it must be completed
my uni stuk at boot screen serial v 1.01 the serial word didnot change 2 usb my desktop pc tell me that usb device not recognized i try all method nothing just boot screen
i try more than one usb cable
i charg my battry full
mtty not have usb choise
when i make hardrest the screen give me press 0 or x
i try the UNI_ExitBootloader.exe not working
i change many pc
i try 2 rest an hard reset 1000000 time
when i plug the usb cable in my device whitout battry it flash red
when i plug the usb cable in my device whit battry it not flash
i try all thing not work tell me that my device dead ???????????????????????????????????????????????
pllllllllllllllllllllllllz help 2 make my uni a live
Please don't make the same post in more than 1 forum, I have replied to your other thread here: http://forum.xda-developers.com/showthread.php?t=420493 which should contain enough information to get your device working again, hopefully.
hello,
i've got serieus problems whit my diamond,
when i turn on the device the only thing i see ist the htc diamond page,
when i wan't to hard reset it it show's
no image found and then trigger usb host... after 5 min the reg green and bleu screen
when i plug it in the pc it doesn't do anything i dont see a external storage
can somebody help mee
sorry for my english i'm dutch
1. Hard reset is Vol Down + Enter + Stylus reset
then follow the screen
2. If you want more help please give the information from bootloader
Get bootloader is Vol Down + Stylus reset
Good luck
don't help ive done that
bootloader
diam100 mfg 64M
spl-1.49.olinex
micropodiam led v11
psoc-diam stage_ovt v0x30
serial
when i put the diamond on usb it says in the bootloader
serial
when i hard reset it it says trigger usb host
retry enter usb
and then goes back to bootloader
i've dont manige to get it connected to pc
can somebody give me some advice please thanx
ketie007 said:
when i put the diamond on usb it says in the bootloader
serial
when i hard reset it it says trigger usb host
retry enter usb
and then goes back to bootloader
i've dont manige to get it connected to pc
can somebody give me some advice please thanx
Click to expand...
Click to collapse
hi
Please do not double post, if you explain your problem in one thread you will get answer.
Read your other post "no usb connection"
Good luck
I have Big broblem in my JasJar after put new Rom The JasJar Shout Down Then it com :
1- No any Boot Loader it com > Black Screen
2- I Cant Make Hard Reaset .
3- I Cant Open Boot Loader Screen.
4- If I Put in USB The Computer is not Read.
What I do? Please Help me and any Person he have Answer in My Trobel Please Give me Step By Step What Shod I do.
Thanks for ALL.
A'sad
Try to follow the correct flashing procedure: disable the USB connection in connections setting on your AS, remove all cards, put your JasJar in a bootloader and re-flash.
asad111 said:
I have Big broblem in my JasJar after put new Rom The JasJar Shout Down Then it com :
1- No any Boot Loader it com > Black Screen
2- I Cant Make Hard Reaset .
3- I Cant Open Boot Loader Screen.
4- If I Put in USB The Computer is not Read.
What I do? Please Help me and any Person he have Answer in My Trobel Please Give me Step By Step What Shod I do.
Thanks for ALL.
A'sad
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=289325
Please
Please The boot Loader Screen is not Com.
No any Screen in my PPc naw?
sorry if a simple questions, but is your battery fully charged?
Please
The Battry is Full Charge.
My JasJar is not Wrking.
No Boot Loader Screen it Com.
No Hard reset Screen it Com.
No any thing it com in The Screen.
Olso If I Boot My JasJar in Charge no any pawer in the JasJar.
USB he cant reed my JasJar .
What i can do?
How do you know the battery is fully charged if Jasjar shows no charge? Have you got an external charger? I read somewhere that if the battery goes very low you have to charge it with a wall charger instead of USB.
I've also read that if you remove the battery, press the reset hole for some 10 seconds and while still pressing it, re-insert the battery and let go of the reset hole it will restart normally.
Did you drop the Jasjar? Did it come in contact with water, coffee, tea, vapour, toilet?
Are you careful or clumsy when inserting USB lead? You may have damaged the USB port in Jasjar.