Related
Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias
i need your help with the bt patch
Hi,
I have downloaded the file from
http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
and looked for the exe file, to run in my xda2.
The exe is a PC installer (didn't work in my xda - not a valid win32 app...)
I finished the installtion process, and now in my add / remove programs i have "Bluetooth Character Password Enabler".
But when i'm trying to bond with my Navman,
still only numbers can be entered. :roll:
Any idea?
(maybe someone have the EXE to run on my ppc, not the installer?)
Thanks in advance,
Tomer
This is a bit unclear, I used towa´s patch like said earlier, followed exactly the instructions and could enable the charpin, and enable my navman
just download and COPY the patch to your xda true activ sync or whatever, and the start the bonding procedure, and when the screen for the pasword comes up, you lanch the explorer on your xda look for the charenable pin, click on it, it will give the message charpin now enabled, close the explorer and type in NAVMAN in big font, and it works perfect.
let us know if you got it to work
Thanks for you quick response.
I tried to do the process as explained:
copyed the file EnableCharPin.exe into my ppc
(via active sync), turned on my navman,
start BT, look for devices, found the navman gps one, next,
and now when the password screen appears i went to "my documents", clicked on the file, and than the error message 'EnableCharPin' is not a valid Pocket PC application" appears.
Any idea?
I saw a post in the forum about registry key or hack, to enable it,
whithout further information.
Thanks,
Tomer
Problem with EnableCharPin
The work that has gone into tying to solve the issue is impressive.
Unfortunately I have the same experience with the response 'EnableCharPin' is not a valid Pocket PC application'
Does anyone have a way to accomplish inputting alpha characters via changes in the registry?
ROM 1.52.00WWE date 10/23/03
Radio 1.05.15
Protocol 1337.15
ExtROM 1.52.86
Regional settings Swedish
Rgds
I have NAVMAN GPS and have the same error. Can anyone explain how is it possible that one can run Windows installer on XDA??
I have just installed this WIDCOMM BT manager. This thing at least is not asking for any pincode so I can easily establish the connection but later on i am not getting any data on the port. I am using ArcPad application by ESRI and I am supposed to use port 8 for GPS.
Can anyone tell me why there is no data comming thru the port?
Another problem is that the connection is lost after few minutes...
it works 4 me now
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer
Re: it works 4 me now
Hey Tomer !
Thanks for your tip. I have had problems with the connection, but I used your tip, and now it works perfect.
tomerbn said:
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer
Click to expand...
Click to collapse
Navman bonding
I dont have a problem getting the XDA II to bond with it, the problem I have is I can only select Com 7 in the Bluetooth tools menu and when I go to set up the GPS in Smartst it wont let me select Com 7.
Anyone have any ideas
I have a XDA and a Navmann 4100. A couple of weeks ago my Navmann dealer sent me the patch EnableCharPin & BTHTools1012 and I started the bond between the PPC and the 4100 and all went fine but a couple of days ago I suffered and full reset on the ppc and now I can not bond the ppc and the 4100 anymore.
Can someone tell what shall I do to bond once again the ppc and the 4100?
I have tried several times with the same process as before (EnableCharPin & BTHTools1012) but I had no succes, the ppc does not allow me to write Navmann, it only lets me write numbers.
towa said:
Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias
Click to expand...
Click to collapse
I had this same problem when I had to do a hard reset with mine couldnt get it to rebond. The only way I managed it was to re install the character enable program. It seems to be specific on which order you do it unfortunately I cant remember what it was. I had to try it a few times myself for it to work.
The way I have managed to do it in the past is to make sure the PPC device is connected to your PC via active synch when you attempt to enter the characters (NAVMAN) That seems to in some way enable the enablecharaterpin software on the PPC. Let me know how you get on.
navman
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe
rudey wrote:
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe
Click to expand...
Click to collapse
Hi Rudey
Hard to say... I believe that a guy called towa wrote this for PPC, but if you look up his user name here and e-mail or PM him he might know
Hope that helps
Regards
Chris
Navman GPS One
Is it possible to get my 'old Navman GPS One' to work with my new Nokia N73?
Best regards
Martin
Enable CharPin
hi there
i tried a few links but i am unable to download Enable CharPin.zip from any for the link please can anyone help
many thanks
Hello!
I had an idea to the horrible "simlock.exe" from the blueangel:
We all know that the "simlock.exe" is write-protected in the rom. So i have searched (with Total-Commander CE) in which other files is standing "simlock.exe" too. And i found the "rilgsm.dll". But this "rilgsm.dll" is write-protected too.
Ok.
I searched now the registry and wooow: I found "rilgsm.dll" in "HKLM\Drivers\BuiltIn\RIL" under the String-value called "dll". When I renamed this "dll" to "xdll" (described in much other things under BA-Hacks) the GSM-Phone isn't working.
My solution:
I copied the "rilgsm.dll" to my PC, opened it with Ultra-Edit 32 and found "\Windows\simlock.exe". I wrote now "\Window2\simlock.exe" in this "rilgsm.dll" and saved it as "rilgsm2.dll" and copied this new "rilgsm2.dll" back to the Blueangel under "\Windows". In the registry i wrote under "HKLM\Drivers\BuiltIn\RIL" under "dll" now "rilgsm2.dll" so that the system now will start my modified "rilgsm2.dll". I also made a new directory called "\Window2" and copied the "AddRingtone.exe" as "simlock.exe" in this new directory "Window2".
So now when I reset the Blueangel it works with my T-Mobile-SIM-Card. So now i haven't another SIM-Card from an other provider, this i will test tomorrow.
But maybe someone can use my idea and will build an crack for this horrible "simlock.exe"
Who knows....
==========
Please let me know when you test my idea and when it works or not...
THANK YOU!!!!!
Ischovits said:
Hello!
I had an idea to the horrible "simlock.exe" from the blueangel:
We all know that the "simlock.exe" is write-protected in the rom. So i have searched (with Total-Commander CE) in which other files is standing "simlock.exe" too. And i found the "rilgsm.dll". But this "rilgsm.dll" is write-protected too.
Ok.
I searched now the registry and wooow: I found "rilgsm.dll" in "HKLM\Drivers\BuiltIn\RIL" under the String-value called "dll". When I renamed this "dll" to "xdll" (described in much other things under BA-Hacks) the GSM-Phone isn't working.
My solution:
I copied the "rilgsm.dll" to my PC, opened it with Ultra-Edit 32 and found "\Windows\simlock.exe". I wrote now "\Window2\simlock.exe" in this "rilgsm.dll" and saved it as "rilgsm2.dll" and copied this new "rilgsm2.dll" back to the Blueangel under "\Windows". In the registry i wrote under "HKLM\Drivers\BuiltIn\RIL" under "dll" now "rilgsm2.dll" so that the system now will start my modified "rilgsm2.dll". I also made a new directory called "\Window2" and copied the "AddRingtone.exe" as "simlock.exe" in this new directory "Window2".
So now when I reset the Blueangel it works with my T-Mobile-SIM-Card. So now i haven't another SIM-Card from an other provider, this i will test tomorrow.
But maybe someone can use my idea and will build an crack for this horrible "simlock.exe"
Who knows....
Click to expand...
Click to collapse
i wish i had enough time on my hands like u! id love to be able to do stuff like that!
how do u get to view and change registry settings?
I#ve edited the registry qith "PHM RegEdit". It's freeware, search in Google...
Looks interesting (HappyGoat? what do you think?)
This looks very interesting, did anybody else try it?
HappyGoat? what do you think?
Status: Blueangel: Idea to SIMLOCK.EXE
This message is for everybody who is interesting what i've found out:
The "rilgsm.dll" is the "Radio Interface Layer". In the BlueAngel this "rilgsm.dll" calls the "simlock.exe" for the correct SIM-Card. The "simlock.exe" gives a lot of result-codes back to the "rilgsm.dll".
My solution in the moment (I hope that i'm on the right way):
On my phone I've modified the "rilgsm.dll" so that it doesn't call the simlock.exe anymore. In this moment when i put in a other sim-card as T-Mobile the phone asks me for the PIN-Code of the new sim BUT then the phone brings me an error "unknown sim-status".
So I hope now that i find out what is necesary for the BlueAngel that it will accept a sim-card from an other provider.
If aomebody has an idea pleas feel free to write me...
good job!
yeah,i think you are are on the right way,i will test your idea.
I dont know if this is any help but i found it on a rival forum (GSM-forums)
Unlock pocket pc PPC 4100 solution here ...
--------------------------------------------------------------------------------
u just need to replace a file on windows folder file name is ( rilgsm.dll )
1. sync your PPC with your computer
2. Download the attached file in this post, rilgsm.dll
3. In active Sync - hit the "EXPLORE" button
4. Double click on PPC and then on the "windows"
directory
5. Copy rilgsm.dll into that directoy , and replace
the existing one
6. Turn off the PPC and then do a soft reset - take
the stylus and breifly poke it in the "reset" hole on
the rear of the unit ( opposite side of the antena).
The unit should then reboot
7. Take out your battery- put in your sim card
8. DONE!!!!!
Here is a files u will need
seeing as the phones look similar and both have the same files - could this be a solution or a place to start looking ie comparing the 2 files
Audiovox rilgsm.dll
keytor69 said:
I dont know if this is any help but i found it on a rival forum (GSM-forums)
Unlock pocket pc PPC 4100 solution here ...
...
seeing as the phones look similar and both have the same files - could this be a solution or a place to start looking ie comparing the 2 files
Click to expand...
Click to collapse
I tried it, but it doesn't work on the BlueAngel. After you replace the dll, the wireless radio switch of the phone turns on/off the Bluetooth :lol:
As for the phone functions: it says a wireless radio needs to be attached to use them...
Could be a place to start, although from what I've learned here so far, you can't (read: shouldn't be able to) unlock the phone just by hacking the rilgsm.dll. Or am I mistaken?
Status: Blueangel: Idea to SIMLOCK.EXE
Hello!
What is the status for my idea to hack the simlock?
I can't hack correct the "rilgsm.dll" only with a hex-editor. And I haven't the tools to dump the communications between the "rilgsm.dll" and the "simlock.exe". As I say in my last post in the moment the solution is that the BlueAngels doesn't ask anymore for the unlock code, but it says "Unknown sim status" when I put in an other sim-card from an other provider.
So in the moment i'll try to get a unlocked version of the BlueAngel. I know somebody who has unlocked versions of the BlueAngel.
When I get such a device first I will make a rom backup.
Then I will compare the file "rilgsm.dll" from the unlocked device with the file from the locked device.
Maybe i must flash my locked device with the complete rom of an unlocked device, i don't know.
I can't say I'm on the right way, but I will not give up in this moment.
I think to get the unlocked device will last approximately two weeks. So wish me luck!
Greetings, Peter
Here is rilgsm.dll from my unlocked device
Any news on your procedure......?
here you have some imei numbers from devices i unlocked (imei-check.co.uk)
35481900014849901
6115794
35481900013359001
93709129
35303000075896101
8540099
35303000067058801
10107856
35481900164713501
72385674
35481900167464201
5337494
35303000141098401
50429213
35481900048168401
32553958
3530300008219901
65418022
if it would help...
wow.. :shock:
can i too
my imei is 353030002939023
thanks
htvi,
Could you provide the .uif file that was extracted by the imei-check tool for each imei/unlock code combination? with those it should be possible to figure out how the people at www.imei-check.co.uk are extracting the unlock code!
Thanks in advance,
JDH
P.S. If anyone else has such information i.e. IMEI, Unlock code and the imei-check .uif data file (as extracted from each Blue Angel) that would be of a great help!
JohnnyDH
unfortunatelly i was too stupid to save all of them...(
but i'm unlocking 2-3 phones each week
i have now 2 orange m500 to unlock (htc magician)
i'll post imei numbers, unlock codes and files tommorow
@htvi
Ok, so I have downloaded both Windows mobile 2005 versions for Himalaya(probiably modified by some guy whose name I forgot), and the other official which i guess can be installed on all devices that have a bit faster processor and enough RAM.
I didnt want to install it before knowing if my m2000 is still gonna be sim-unlocked. Can you tell me htvi, or anyone else?
Thanks in advance
I don't know if it helps but, you may check this one out on http://unlock.nokiafree.org/ :
Download binaries for windows of NokiaFREE unlock codes calculator version 3.10
released on 4th, October, 2004
Maby the calculation steps just work...
ok, so here is one of them:
IMEI 354819002404379
UNLOCK-CODE: 60597866
i'll post the second later
note: it was an orange m500 (htc magician)
@htvi
Sorry about the delayed response, I'm often away for periods of time and have only just had an opportunity to check!
Thanks for that first set; have you processed any further phones and can therefore provide the details? the more the better really! if it would be easier for you, PM me and I'll provide my e-mail.
Cheers, JDH
Unlocking data
Here's th info of a recently unlocked MDA III (BlueAngel):
IMEI: 353030002519296
Unlock code: 5809468
Hope this helps.
i have been compiling my own ROM using the available tools. it is almost at what i would call perfect, except for a few issues that i am unable to solve. any knowledge and help would be highly appreciated!
1) in the Control Panel, i would like to remove the following items:
encryption
managed programs
usb to pc
2) setting the IE homepage: I have set (by adding to an .rgu file)
[HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\Abouturls]
"home_0409"="http://www.google.com/m/classic"
[HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer\Abouturls]
"home"="http://www.google.com/m/classic"
but no matter, after i flash, it always goes to "http://mobile.htc.com"
obviously my settings are being overridden elsewhere, but i have searched for hours and have not found where from.
3) i am trying to delete the registry entry:
[HKEY_LOCAL_MACHINE\Comm\InternetSharing]
"Extension"="Rilphone.dll"
i have placed in an .rgu file the following entry:
[HKEY_LOCAL_MACHINE\Comm\InternetSharing]
"Extension"=-
but no matter, the first entry is always present after flashing.
4) i cannot figure out where the Resco Explorer registration info is located so i can have it registered from the start. i have search and found that i am by no means not the only one with this problem, but no one has reported success.
5) i am using the Vista Cube, and somehow the name entries for the "email" and "sms" tiles have been switched. once, again, i have placed correcting entires, but they are apparently being overridden.
other than these issues, i have created my perfect rom! if anyone can help on any of these, please do report. thank in advance.
P.S. i have posted the same here and here.
I am having problems with applications under Windows Mobile 5.0. When i try to run them i get the following error.
The file 'foo' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file.
1)Is there anyway of disabling the checks for trusted applications in Windows Mobile 5.0 on the Wizard?
I think this error becuz u r trying to run wm6 applications under wm5
vodovodo said:
I think this error becuz u r trying to run wm6 applications under wm5
Click to expand...
Click to collapse
I have same problem for BA wm 6.1 5.2.19199.1.0.0 PV DVH. Some people offered solution of HR. I don't agree with this. because we have to lose what we've been installing and spend more time re-installing them. so much time-wasting?
Any other solutions, please?!
Thanks in advance.
Problem may be cause of your SD card if u r using WM6. SD card PowerManagment value is set("DisablePowerManagment") to 0 in your registry. This means after a while your device will set your SD card power off for savg batttery. This cause to unread your program files etc while u start any program on your form your SD card device.
I fixed this problem like that;
By any registry editor:
Find the Path:
"Hkey_local_machine>drivers>sdcard>clientdrivers> class >SDMemory_Class"
after that find;
""DisablePowerManagement"" key and set its value to "1" than save and exit. Than soft reset your device. Problem will be fixed.
Sorry for my bad english.
Windows Mobile powered devices are shipped with default security settings.
The security model enables Mobile Operators to make post-production changes to security settings.
This can place significant restrictions on software which has not been signed and approved.
However you can change the default settings.
Take control of applications on your phone.
"All listed settings are decimal"
1. Connect the phone through ActiveSync.
2. Run your favorite remote registry editor "CeRegEditor (Download)" "Mobile Registry Editor (Download)" on your PC. http://ceregeditor.mdsoft.pl/
3. Navigate to HKEY_LOCAL_MACHINE\Security\Policies\Policies
Unsigned Prompt Policy:
This policy indicates whether the user is prompted to accept or reject unsigned .cab, theme, .dll and .exe files.
HKEY_LOCAL_MACHINE\Security\Policies\Policies
DWord = 0000101a Data = Use the following-->
0 = Indicates user will be prompted.
1 = Indicates user will not be prompted.
you will set that register decimal 1. that is solved problem
I have a HTC Tytn II and i get the same error. However, When trying to alter data using the reg editor you recommended, i found the 0000101a was already set to 1. Any other ideas?
Hi All,
Would someone be so kind to me a explain how I can move a package from the EXT directory or one Kitchen to the EXT directory on this version of kitchen.
I thought I could just simply copy the directory? So I had a go compiling a version of youtube from a different kitchen It would seem mot to work thou as I get the dreaded The file 'xx' cannot be opened. Ether it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring the file.
Any ideas how to get this to work?
Or look for the tool MsSigner, it can be found in most kitchens.
You'll be able to sign it with a signature that is accepted after you aply the enablyRapi and SPCCerts policies.
You're probably missing a key dependency package like dshow (mshow?) or concurrence manager. Also, make sure the shortcut path is valid. Lord knows why, but that's the message you get for bad shortcuts.
josephwsl said:
I am having problems with applications under Windows Mobile 5.0. When i try to run them i get the following error.
The file 'foo' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. You might need to reinstall or restore this file.
1)Is there anyway of disabling the checks for trusted applications in Windows Mobile 5.0 on the Wizard?
Click to expand...
Click to collapse
maybe .NET CF is missing or not up-to-date?
RAMMANN said:
maybe .NET CF is missing or not up-to-date?
Click to expand...
Click to collapse
ahh i love you bro, u saved me an hassle i tried everything and it was the net.cf
damii said:
you will set that register decimal 1. that is solved problem
Click to expand...
Click to collapse
When I try that, I'm told I don't have the authority to access that. :-(
now what?
Yeah, me too!!!
All of a sudden too. Everything was fine then I got these certificate errors every time I try to run Haret.exe to run android. This happened last night. Did my provider change something on me?
I try to change that registry key and it won't let me.
Re:this post
I have same problem for BA wm 6.1 5.2.19199.1.0.0 PV DVH. Some people offered solution of HR. I don't agree with this. because we have to lose what we've been installing and spend more time re-installing them. so much time-wasting?
You need hard reset!
Same problem "certificate errors" and a hard reset wont work
Plz help
damii said:
Windows Mobile powered devices are shipped with default security settings.
The security model enables Mobile Operators to make post-production changes to security settings.
This can place significant restrictions on software which has not been signed and approved.
However you can change the default settings.
Take control of applications on your phone.
"All listed settings are decimal"
1. Connect the phone through ActiveSync.
2. Run your favorite remote registry editor "CeRegEditor (Download)" "Mobile Registry Editor (Download)" on your PC.
3. Navigate to HKEY_LOCAL_MACHINE\Security\Policies\Policies
Unsigned Prompt Policy:
This policy indicates whether the user is prompted to accept or reject unsigned .cab, theme, .dll and .exe files.
HKEY_LOCAL_MACHINE\Security\Policies\Policies
DWord = 0000101a Data = Use the following-->
0 = Indicates user will be prompted.
1 = Indicates user will not be prompted.
you will set that register decimal 1. that is solved problem
Click to expand...
Click to collapse
Thanks! That really helped me. You literally saved me a good night sleep. I was already desperate.
Wow, it works Thank you!!!
Awesome!!!
This worked perfectly. Thanks so much for the help. I've been racking my brain about this for over an hour now, then found this through a search.
Thanks!
OMG
I have the same problem and I tried :
1/ Hard Reset
2/ Rom Update
3/ installed NetCFv3.5
4/ editing values in the registry
what els ????!
plzz i need your help
Hi there,
I have a new Q9h (my 3rd). It arrived yesterday with WM6.1. As I have in the past, I did a regiedit to remove file size limits for ring tones and alarms; then I used enableRAPI to organize my start menu.
Today, I connected my phone to my computer and figured I'd try Motorola Software Update. It found and update and didn't give me an option to back out. It seems to have applied a security patch making external registry edits through activeSync impossible and doesnt allow enableRAPI to connect.
I used RESCO registry editor on my Q and took care of the file size limit... but I am EAGER to modify my start menu.
When I run enaableRAPI (it's from the zip file with the .bat, xml and .exe files) i get this:
Config failed (0x80070005): Access is denied.
I called Moto.. they said if ActiveSync is working (which it is) this is likely something put in place to prevent hacks and means that the software is not compatible.
I am SOOOO annoyed! I spent my money on this darn phone and some a$$hole programmer at M$ or AT&T or MOTO gets to decide how I can access my stuff.
Please help. =(
thanks.
Solution.. sorta
Resco Explorer... slower than other ways.. but it works..