Develop Bugs

1.40.00 Asian WWE O2 ROM GPRS Glitch

I found a glitch I've been trying to work around. I use an XDA IIs from O2 with the current Asian WWE O2 ROM in English ;-). Well if I connect to GPRS and use the internet for whatever amount of time I need it for, and disconnect, connect again, and disconnect, it will eventually freeze up the connection when I try to connect again. Either way after like 3 GPRS usages I must softreset in order to connect to GPRS, anyone have this same problem? I would like WM5 but I've upgrade and downgraded 4 times, its just not for my phone, its too slow even with overclocking.

i had the same problem~
and found this as the solution from somewhere in the search
PeterW said:
Here is a step by step instruction:
1. Download the older version of caller-id from:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Caller ID/IA_CallerID_1.20_WWE.CAB
and transfer it over to your device. Any directory is OK. I used ActiveSync to put it into the My Documents folder.
2. Remove the file IA_CD-Startup.exe from \Windows\Startup on your device.
3. Rename iacontacts.dll to something else (e.g. old-iacontacts.dll). This file is in the \Windows directory of your device but is hidden. However you can rename it using your PC. Open Windows explorer, and navigate to Mobile Device>My PocketPC>Windows.
4. Rename displayCID.dll to something else (e.g. old-displayCID.dll). Access it via your PC the same as for the previous step.
5. Soft reset
6. Run the CAB file on the device - just tap on it.
7. Soft reset.
That should do it.
- Peter
Click to expand...
Click to collapse

Hi there,
I posted a problem today that doesn't sound quite like the one above.. but maybe it is... please read my post (don't want to make a mess by posting here too) and let me know if you think the caller id could the issue.
Thanks.
http://forum.xda-developers.com/viewtopic.php?p=181358

Hi there,
following my reply on the other thread, I found this one & followed the instructions. Since then I can always connect & disconnect GPRS and never need to use flight mode to re-activate GPRS

weasel said:
Hi there,
following my reply on the other thread, I found this one & followed the instructions. Since then I can always connect & disconnect GPRS and never need to use flight mode to re-activate GPRS
Click to expand...
Click to collapse
So far... soooo good. Strange that caller id would cause the issue. I also downloaded a "Keep your GPRS connection alive" app from another posting. That may be helping as well. Either way, no headaches thus far.
Thanks!

WM6 & ActiveSync

Hi All.
I have a problem with MS ActiveSync that's driving me mad.
I have Windows 2000 loaded on my work laptop (not my choice but my IT departments) and I'm currently using ActiveSync 4.2 - A couple of weeks ago I loaded one of the latest WM6 roms onto my HTC TYTN with no problems at all - I was very impressed with the basic enhancements and especially the fact that I could at long last recieve a text message notification for voicemail (I'kme easily pleased I know) - So now to my problem.
I tried to connect my TYTN to my laptop to load my BB Connect profile when I got a message that I need to upgrade ActiveSync to 4.5 ???? So, not concerned at this point I download the latest MSI package and started to install ActiveSync 4.5 on my Windows 2000 system... but.... towards the end of the install I got an error message telling me that I cant install ActiveSync because I am missing some DLL files (it doesnt specify which .dll files???)
I've searched everywhere for help resolving this problem but to know avail? So I have 3 questions?
1. Is there a known issue with ActiveSync 4.5 and Windows 2000? If so is there a fix for this?
2. Is there a viable alternative to MS ActiveSync that will work with WM6?
3. Is there a way of Syncing my BB Connect settings with my TYTN without using AciveSync.
Apologies if this is already covered elsewhere on the forum - any help at all would be greatly appreaciated.
Thanks.

One quick google search has given me this post. Give that a go and see what happens?

MAPI32.dll issue...
My wife had a similar issue which was either the mapi32.dll problem or just a fubar ActiveSync. I ran the fixmapi as well as removed most if not all traces of the old ActiveSync (Program Files and registry)
Hope this helps...

FixMapi
Thanks DBaser and MrVanx - I've already tried the FixMapi option but with no success - will try again followed by a sweep to remove any traces of a previous ActiveSync install before re-installing - I'll let you know how I get on.

Sigh....
OK - Tried running FixMapi.exe once again having completely uninstalled ActiveSync 4.2 and deleted the directories from the programmes directory and still I get the same error message? HHEEEeeeeelllppppp.....!!!!! This is driving me mad.... How about just getting the BB Connect settings accross to my TYTN without having ActiveSync installed???? Any Idea's?

Have you tried reinstalling the ActiveSync that came with your PDa and then run the 4.5 installer?
Give that a go...

VM6 requires Active Sync 4.5

Tried all of the above - still no joy!

Can you post a screenshot of the error message and also maybe check the Event Viewer (Start>Run>eventvwr) for Application or System errors that could help me diagnose further?
Wessel.Dk said:
VM6 requires Active Sync 4.5
Click to expand...
Click to collapse
I am aware of this. I was asking the OP to install earlier ActiveSync and then run the 4.5 installer.

try hard resetting....then before doing ANYTHING, sync...follow the sync directions....make sure a new device name is synced with pc and device.......many go-arounds were finally solved by this.

rockky said:
try hard resetting....then before doing ANYTHING, sync...follow the sync directions....make sure a new device name is synced with pc and device.......many go-arounds were finally solved by this.
Click to expand...
Click to collapse
rockky, go back and reread the thread. THis has nothing do do with the PPC. he is trying to install software on the PC.

Still Trying....
All. Thanks for the input so far - if anyone comes up with any more suggestions then please let me know!
I'll keep at it and if I find a solution will add the details to the post.
My IT dept are pretty snowed under as with those in many companies and so my little problem with a missing dll when trying to install a peice of software that has little or no benefit to the company is way way down the priority list.
Thanks again.

More Pain....
So... a short update.. I managed to convince my IT department to upgrade my system to windows XP (SP1 though as SP2 isnt yet supported by them) and guess what happens????
I eagerly await the arival of my new laptop - I get it today - boot it up - go straight to the microsoft website - download the activesync msi file..... hit the install button - and then..... and then I get the missing dll file error...
This is driving me mad? I'm presuming its a 'corporate' image problem or a specific peice of software installed on our laptops thats the issue? Are others having the same problem? and is there anyone out there who has found a working solution? or am I going to have to wait for another release from microsoft and hope that installs?
Alternatively - is there a way of setting up my blackberry connect settings without using active sync??? Can they be exported some other way? from tytn to tytn for example (Yes - I'm lucky enough to have two!)
As ever - any help is appreciated.....

unable to update hx4700 2003 - MW6 using Bootloader!

I've read good reviews on chrismrulz's bootlaoder programe and I'm trying to use it to update my iPAQ 4700 from 2003 to WM6. However I am obviously doing something wrong as I just cannot get it to work!
Please can anyone offer any advice?
I hope I am following the exact instructions as mentioned here at http://forum.xda-developers.com/showthread.php?t=325727
and here is what is happening:
Step 1.
Make new folder in root directory.
No Problem c:\Bootloader set up.
Step 2.
Download WM6 ROM and bootloader into file.
Done as directed from links in instructions directly into new folder.
Checked and c:\Bootloader now has 2 files in it Bootloader.exe and WM6_4700_0_7_0_RELEASE4.rar
Step 3.
Put hx4700 in bootloader mode and place in sync cradle.
I assume I have done this correctly. Screen goes blank and you can just make out the HP logo it says USB when in cradle and shows version 1.01
Step 4.
Open bootloader and select image.
Ok I go to folder and double click on Bootloader.exe
I get a security warning about the software and ignor by pressing run.
2 things now happen simutaniously. Bootloader.exe expands and creates c:\Bootloader\Bootloader and fills it with more files and directories and....
I get a box asking me to select a file to flash ROM to my device. I change the directory back to C:\Bootloader and select WM6_4700_0_7_0_RELEASE4.rar and press open.
I get a message telling me to please wait the file is being extracted and inviting me to press ok. Before I can press ok the box is replaced with a winRAR Diagonistic Message saying c:\Bootloader\WM6_4700_0_7_0_RELEASE4.rar no files to extract.
I close this dialog box and get another message telling me to wait whilst it edits files. Then this in turn is replaced by a message saying Error reading file c:\Bootloader\Bootloader\temp_nbf\ I click on OK to acknowledge.
And that’s it nothing else happens.
I've obviously read the instructions wrong or something can anyone help point me in the right direction? Or offer any alternatives?
I'm using Active Sync 3.7.1
Thanks
Phil

Open the rar file (with WinRar), and read the instructions that are in the Readme.txt file... And update your Activesync to version 4.5, which is needed for WM6.

Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?

Phil3099 said:
Excellent,
Thank you Ridolfo, so much easier than what I was trying to do. I now have WM6 working and am very pleased with it.
One problem i now have is Activesync 4.5 will not work with my Outlook 2002 I dont suppose anyone knows a workaround or do I have to buy a copy of Outlook 2007?
Click to expand...
Click to collapse
Very strange indeed, my AS works fine with OL2002... Did you use the MS Office Update to get the latest servicepacks for OL ?
Dirk

Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy

Phil3099 said:
Outlook 2002 now ok. I was havinag a bad day yesterday. Now if I can just find a way of viewing java enabled web pages I will be happy
Click to expand...
Click to collapse
Try these .....
First install JBed, then Opera
Cheers
Dirk

Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil

After extracting using WinRAR

Trying to upgrade from 2003 to WM6 ...
After extracting WM6_4700_0_7_0_RELEASE4.rar using WinRAR I am trying to follow the instructions in the readme.txt (as Bootloader didn't work for me as in the first post in this thread):
From readme.txt
To begin with if you want to flash your device using cradle,you have to:
1.In processes (CTRL+ALT+DEL) you must kill Wcesscom.exe
2.Then Enter in Bootloader (Contacts+iTask+Reset)
3.Put your device on usb cradle.
4.Run mtty11a.exe
5.In "Port" choose \\.\WCEUSBSH001 and click OK
6.Write command: lnb OS_WM6.nb0
7.Wait
8.Enjoy yourself
As I'm not all that familiar with this can someone explain in step-by-step what's involved with the mtty11a.exe application, and Step 6?
Currently my hx4700 is what I think in bootloader mode (Screen is dim an I can barely make out "USB" the hp logo and the current version "v1.01"). I previously tried the original WM5 upgrade and it just dies on me at 0.1%.

Hi tk2000
As I posted the original post I know exactly what you are going through. However once I went through the instructions you are currently trying to use every thing went smoothly. You have extracted the .rar file and are unsure of the mtty11a.exe file.
Assuming you have you have killed Wcesscom.exe on your pc as in step 1,
and the device in in its cradle in bootloader mode (as you described very faint HP logo, USB and version 1.01 displayed).
Then double click on the mtty11a.exe as in step 4. This then brings up an application and you will see a dropdown menu next to port, simply select the option \\.\WCEUSBSH001 and click ok.
6.Write command: lnb OS_WM6.nb0 now this stage I was a little unsure of myself I simply typed "lnb OS_WM6.nb0" in from the keyboard and pressed enter and it started to load. This takes a few minutes but afterwards you should have WM6 on your device.
I had to do a couple of hardware restarts and it took a few minutes in its cradle but it all works fine for me.

Phil3099 said:
Hi Dirlan,
Thank you for the files. I was already experimenting with Opera so I deleted it from my iPAQ loaded Cloudyfa_EsmertecJbed.cab and then reinstalled Opera.
Unfortunately I get an error message from Jbed saying "the file jbed cannot be opened. Either it is not signed or one of its components cannot be found.
Any ideas?
Phil
Click to expand...
Click to collapse
Hi Phil,
There should be an 'opera-unsigned*.cab' somewhere here on the forum. I didn't try it because Opera works fine for me.
Sorry
Dirk

Phil3099, I a followed the instructions exactly but I don't see a status bar on the pda. mtty showes the progress with lines of + but the 4700 stays on the hp logo screen with USB on top.

help for dll

hallo friend, i ve a big problem on my p3300, i have downloaded program much important for my job as FIELD TEST, but on artemis does not works.
so i have read on web more more pages and i understand that the problem is a dll that in p3300 /windows there isnt: rilgsm.dll.
without this dll some port are closed on my htc i suppose com 9 and 6 (network ) so field test doesnt work propely!
can someone explane me how i can solve this problem or i can extract or add this dll.
i have actually italian wm6 official on my p3300 , but i can install also a unofficial rom with rilgsm.dll.
i wait for help as soon as possible
thanks

rilgsm.dll is in the Artemis Touch 4.01 WM6.1 WWE ROM - Lite without cube ROM as well as the other versions (full, vanilla, etc) I suppose.
But, I'm not sure that is the complete answer to your problem. I was trying to run a program which ran fine on my previous PPC using com6 but would not run on my Artemis using com4 (needed to run TomTom). Today, I found a solution here that works. It's called portsplitter. I installed it today and sucessfully used TomTom (requires com4) and the other program (requires com6) as well on the newly created com8! (see the link above to makes sense of that). Maybe what you need?
Here's another link in the Artemis forum discussing this issue.

runningtiger said:
rilgsm.dll is in the Artemis Touch 4.01 WM6.1 WWE ROM - Lite without cube ROM as well as the other versions (full, vanilla, etc) I suppose.
But, I'm not sure that is the complete answer to your problem. I was trying to run a program which ran fine on my previous PPC using com6 but would not run on my Artemis using com4 (needed to run TomTom). Today, I found a solution here that works. It's called portsplitter. I installed it today and sucessfully used TomTom (requires com4) and the other program (requires com6) as well on the newly created com8! (see the link above to makes sense of that). Maybe what you need?
Here's another link in the Artemis forum discussing this issue.
Click to expand...
Click to collapse
thanks for answer, maybe can you explane how i can set ports?
i need only field test works , it is only excutable file, no need installation, there isnt configuration to do , is very simple, maybe i can send to ou the file to test.
i wait for help thanks again

pls help me

I don't know how to copy just the rilgsm.dll file you want. It's part of the rom and so access is denied on both the phone and via activesync.
Also, I don't know how to set ports. Did you try the portsplitter application I linked to above? I am using an application on my phone right now that uses port 6 thanks to the portsplitter application. Try it!
Upload your application here or post a link, and I'll see if I can give it a try.

i ve uploaded file here: http://www.megaupload.com/it/?d=ZL2OLMS0
please try it, anyway i dont know how to use port spkitter right mode, maybe i wrong to setup it
for it i need help

no one answeres.........

what's up with the (mad) face man? I have been trying to help you. I had a busy weekend and we are in totally different time zones - so relax.
Here, I will spell out very clearly how to use portsplitter...
Artemis settings:
start menu\settings\system tab\external GPS
programs tab...com8
hardware tab...com9/baud 4800
access tab...tick (select) manage GPS automatically
PortSplitter settings:
input: using your keyboard type COM8
baud: select 4800
output: select com6 and press 'add' then press 'start splitter'
the program will then be running in the background
Now go to your fieldtest app and set it to use com6 at 4800 baud. Or, if you know it uses com6 by default, just open it and see if it works.
If it works, you have two options. You can either start portsplitter each time you want to use it. Or, go back to the portsplitter app and tick 'autostart' so a link will be placed in the \windows\startup folder and you won't have to start it manually each time you reboot. It will always just run in the background. (edited to ad...) Actually, selecting 'autostart' only saves your settings so each time you open portsplitter it will run on com8 etc. You need to manually put a shortcut in the windows\startup folder for it to actually start up each time you turn your phone off and back on.
Now, if you use the portsplitter AND any other GPS programs (i.e. TomTom), you'll need to set that program (i.e. TomTom) to use com6.
In TomTom you do this by pressing the lower right hand corner of the screen where the clock and signal strength bars are. On the next screen press the right hand side of the screen where the battery status and signal strength bars are. Now press the lower left corner button called 'configure' and choose 'other NMEA GPS receiver' and press 'select'. Set the baud rate on the next screen for 4800 and press 'done'. Finally, press 'com:6 Port Splitter' and press done!
It works fantastic on my Artemis. I have another GPS program and I set up the GPS communications to use com6 at 4800 and it works like a charm as well. I've set PortSplitter to autostart after each boot, and I haven't given it a thought since. It just works.
I tried to download your app but there is a message that says "The file you are trying to access is temporarily unavailable."

I have fieldtest running on my Artemis right now. It looks like it auto sets itself to refresh every 3 seconds. The right hand side of the screen is called 'GSM' the left is called 'data'. Almost all data fields say N/A except for RSSI and Rx Quality. So, it looks like it runs, but does not work.
Probably due to this:
"fieldtest is not compatible with 9100/Prophet/Artemis. For those devices you need to use GSMTestMode.exe"
However, just in case you might still find this info useful...before trying fieldtest on my phone, I searched what it was about and found the info here. You may have already read it, but if not, there you go. BTW, (if you DID read it) you could have just directed me there to download the program rather than how you did it.
Lastly, I tried the registry edit:
HKEY_LOCAL_MACHINE -> SOFTWARE -> HTC -> EngineerMode -> BuildInEngineeringModeApp = 1
It changed nothing, the program is still mostly full of N/A responses. Also, ran the program from \windows and got the same responses as when I ran it from the memory card.

GSMTestMode.exe exists on my Artemis in the \windows folder.
To use it check this registry setting:
HKEY_LOCAL_MACHINE -> SOFTWARE -> HTC -> EngineerMode -> BuildInEngineeringModeApp = 1
Mine was 0 originally. I changed it to 1 and soft reset the phone. Then, opened the \windows folder and clicked on GSMTestMode.exe and all the info shows up instantly.
That was with portsplitter running in the background. So, I disabled portsplitter, soft reset and clicked on GSMTestMode.exe again - and it worked. Using/not using portsplitter made no difference. I did not check the values reported since I don't care enough. The rest is up to you.

thank you very much runningtiger, your info were very very precious for me, now works all fine.
only 1 problem: after i edit value from 0 to 1 in registry, gsm test mode works fine , but if i reboot artemis or shutdown and restart registry value back 0.
is there any way to solve?
bye and thanks again

This isn't an issue on my phone. I made the registry change using TotalCommander and used the exit command on the menu to close TotalCommander (rather than the X in the upper right hand corner). Then, I soft reset by pressing the reset button with the stylus. When my phone was ready to go again, I opened GSMTestMode.exe used it, closed it, then reset my phone again, used GSMTestMode.exe again and it worked again. So, the registry change sticks on my phone.
Usually the reason registry changes don't stick is not enough time passed before soft-resetting the device. Some registry changes are ready to use immediately, but others take a moment to actually write to the registry and if that process is interrupted then the change isn't actually made.
Three thoughts on your phone...
1) did you wait about a minute after making the registry change before soft-resetting your phone? This allows plenty of time for the change to be actually written to the registry.
2) wait a minute after doing the registry change, then try instead of soft-resetting doing a full power down by holding the power button until you are asked if you for sure want to turn off the phone and then let it sit a minute (off) before starting it up again?
3) can you try using TotalCommander to make the registry change like I described above?

runningtiger said:
This isn't an issue on my phone. I made the registry change using TotalCommander and used the exit command on the menu to close TotalCommander (rather than the X in the upper right hand corner). Then, I soft reset by pressing the reset button with the stylus. When my phone was ready to go again, I opened GSMTestMode.exe used it, closed it, then reset my phone again, used GSMTestMode.exe again and it worked again. So, the registry change sticks on my phone.
Usually the reason registry changes don't stick is not enough time passed before soft-resetting the device. Some registry changes are ready to use immediately, but others take a moment to actually write to the registry and if that process is interrupted then the change isn't actually made.
Three thoughts on your phone...
1) did you wait about a minute after making the registry change before soft-resetting your phone? This allows plenty of time for the change to be actually written to the registry.
2) wait a minute after doing the registry change, then try instead of soft-resetting doing a full power down by holding the power button until you are asked if you for sure want to turn off the phone and then let it sit a minute (off) before starting it up again?
3) can you try using TotalCommander to make the registry change like I described above?
Click to expand...
Click to collapse
i resolved upgrading to wm6 official and now works all fine, so my friend thanks again for support and precious infos

Rhodium bluetooth not working!!!!!!!!

hi i'd like to know if theres someone who can fix this problem i have, when i go into communications to turn my bluetooth, it wont turn on, a window pops up and tells me it cant turn on, i cant even access the setting for it.
also everytime i start up my Rhodium, a error window pops up and says
BTTrayCE.exe
'BTTrayCE' is not a valid Pocket PC application.
someone plz help me with this thank you

DjSoundScan said:
hi i'd like to know if theres someone who can fix this problem i have, when i go into communications to turn my bluetooth, it wont turn on, a window pops up and tells me it cant turn on, i cant even access the setting for it.
also everytime i start up my Rhodium, a error window pops up and says
BTTrayCE.exe
'BTTrayCE' is not a valid Pocket PC application.
someone plz help me with this thank you
Click to expand...
Click to collapse
hi have you installed tomtom by any chance if so have a look here http://forum.xda-developers.com/showpost.php?p=4362258&postcount=6
cheers

DjSoundScan said:
hi i'd like to know if theres someone who can fix this problem i have, when i go into communications to turn my bluetooth, it wont turn on, a window pops up and tells me it cant turn on, i cant even access the setting for it.
also everytime i start up my Rhodium, a error window pops up and says
BTTrayCE.exe
'BTTrayCE' is not a valid Pocket PC application.
someone plz help me with this thank you
Click to expand...
Click to collapse
I have the exact same problems. I suspect the BTTrayCE error is from installing a version of tomtom that doesnt work on this phone (which i did do).
Any help regarding the bluetooth would be appreciated as mine behaves the same as described above (it basically only gives the option of connecting to bluetooth headphones...)

You will have to do a hard reset. You'll lose all your installed programs and settings.
If you remove the bluetooth drivers from the TomTom CAB you'll be able to install it without messing up the bluetooth (google to find a program to do this).

DuncanMcCloud said:
I have the exact same problems. I suspect the BTTrayCE error is from installing a version of tomtom that doesnt work on this phone (which i did do).
Any help regarding the bluetooth would be appreciated as mine behaves the same as described above (it basically only gives the option of connecting to bluetooth headphones...)
Click to expand...
Click to collapse
I got it sorted, did as was said on page 7. You must use total commander.

solution to tt7 bluetooth mess up
no need to hard reset. just rename and delete the following files and soft reset your device. woked for me.
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll

ive got the same problem, but i cant find the files. its in device\windows right?? where else might the files be?

Rename the files and replace them with the ones mentioned above. It fixed my problem.

DuncanMcCloud said:
Rename the files and replace them with the ones mentioned above. It fixed my problem.
Click to expand...
Click to collapse
I'm using Total Commander. When I try to rename the file, the file name remains as the original. When I try to delete the file, the screen tells me that it cannot delete the file. I have not installed Tom Tom or anything else. Help?