Related
I've got an SX66
ROM VER: 1.33.10 WWE
ROM DATE: 1/21/05
RADIO VER: 1.02.10
I setup wireless manager to work on my home network. At the heart is a linksys BEFW11s4 wireless router with WEP enabled (64 bit).
It asked for the security password which I entered but it kept telling me was wrong. Finally it stopped asking me and the wireless manager show that I am connected to the network. It shows the correct SSID, channel etc.
However I still cannot access the internet or anything else on my network. It seems that I am not really connected.
What the H$!! am I doing wrong??
Please help.
Did the router give you an IP address?
I.e. Is the router DHCP enabled?
Happygoat
Yes it does give me an IP address (SX66 set to auto assign)
In reading over your post I started checking my settings and realized the problem.
I have to manually enter the key.
Once I did that...boom I am online.
Thank you for your help.
Joe
@HappyGoat
Hi I have had some problems with wifi hope you can help. I couldn’t find anything on this forum about it (maybe I didn’t search well but don’t think so) Listen, I managed to find some hotspots, I used a lot of programmes, like Streethawk, or WIFIFORM(or something like that), and many more, but all I could get was windows popping up to select connect using that and that to internet or work. I tried work, but that is it every time I got the message I couldn’t give you IP or something. like that. My Ip settings is give IP automatically. Am I doing everything ok, or is this problem network issue because I was trying to connect on public hotspot(which might be not accepting connections). And how do I know if the hotspot is accepting connections free of charge? Hope you can give me detailed instructions.
Thanks in advance
ilijamn: I use a programme called "WIFIFOFUM" and when in the programme on the left side of the window is a column called "WEP" which will either say "on" or "off" for a certain connection.. now when it says "on" you cannot use it without a network key(basically a password) but when its "off" you should be able to use without a problem...To connect to a connection while in WIFIFOFUM jus tap and hold the connection and select connect...
now also when that window pops up, its better to sellect connect via "internet" rather than "work"....
I hope this helps you...
@tradivise
Thank you it helped me a lot! But sometimes in WiForum it takes a lot of time to connect, and I tryed a lot of programmes and then I downloaded Street HAwk, It is the best one, at least for me.(the progremme does everything automativly-which is cool). Anyways, i have to ask you smth. else (prob. stupid question), when a network(hot spot) is free of charge do I need to set up IP settings and DNS settings and what is VPN?
Thanks
@tradivise
Thank you it helped me a lot! But sometimes in WiForum it takes a lot of time to connect, and I tryed a lot of programmes and then I downloaded Street HAwk, It is the best one, at least for me.(the progremme does everything automativly-which is cool). Anyways, i have to ask you smth. else (prob. stupid question), when a network(hot spot) is free of charge do I need to set up IP settings and DNS settings and what is VPN?
And is there any pocket web browser for internet that can open multiple widows(tabs)????
Thanks in advance,
Ilija
ilijamn:
VPN - Virtual Private Network, long explanation so just google search it.
IP and DNS should be setup automatically by the network, but some networks require a network key (WEP) which is like a password and without it you cant use their network...
hope this helps, any more questions jus ask!!!!
not sure about multiple tabs, if i find i will let u know
That should do it. Thank you
As a wifier with a pda2k , how does one know if he has been discovered by the network owner and in addition , where he has gone , not to mention the pda's security . My files can't be looked at can they? I need serious security assistance . My personal data may have allready been compromised! Damn .
Thank you.
(I'll just wait here on a secure network till I can secure my 'lil unit
Treat your PPC as if it were a portable computer running on celeron. As of the moment I can only recall maybe 4 known viri for Windows Mobile. If you are an avid WiFi'er as I am, try to browse your unit from your desptop pc without activesync activated. You might want to port scan the PPC as well. I run an FTP and web server on my unit (for my own purposes), and I have never had any files compromised unless I allow it. If you are really that peranoid, encrypt the files you don't want read without your permission.
Well I'm a Mac guy so browsing on a desktop won't happen. I just need to be able to surf annomously and not have the network owner view me or my files.
The netwqork admin will always know you are using the router because the wifi router assigns you an IP address. No getting around that. But it will be highly unlikely that he can access your unit resources unless you have a backdoor trojan running on your unit. If you don't know, google up "antivirus scanner for pocket pc", and install it.
Hey MACGUY have you seen PocketMAC? It could be useful!
SORRY i didnt mean to hijack your thread!
NOMADMAN - you said your are a wifi junky - How do I surf the net from my MDA3 using WIFI. Is appears that I can connect to my belkin wireless router but when I open IE - No page can be displayed and then it asks me to check my settings but then all the new connection settings doesnt include wifi connectivity? HELP!
meatychi said:
...How do I surf the net from my MDA3 using WIFI....HELP!
Click to expand...
Click to collapse
The are all kinds of info already posted here mate. What I would tell you here, I and many others have already posted in the past.
nomadman said:
The netwqork admin will always know you are using the router because the wifi router assigns you an IP address. No getting around that. But it will be highly unlikely that he can access your unit resources unless you have a backdoor trojan running on your unit. If you don't know, google up "antivirus scanner for pocket pc", and install it.
Click to expand...
Click to collapse
Thanks . I installed the viri scanner and found nothing. It maybe that the open AP is being tapped by someone else as well as me , explaining the third MAC address. Can this be possible? It's a ff.ff.ff.ff.ff
First off, please accept my apology if this question has been answered somewhere, but I feel like I have checked the farthest corners of XDA developers with no luck............
I cannot not seem to access my desktop computer's folders over wifi anymore...........
now i am no stranger to WM phones in anyway, I've had the mpx 200, 220, T-mobile sda, mda, cingular 2125, audiovox smt5600,and have been tweaking forever and now the Cingular 8525, I am running the LVSW(3/26)WM6 rom
I use to be able to access my folders very easily over my past devices, so I need your help???????????
I think it's a combination of my connection settings, and wifi settings, but who knows..........
anyhow I'd really appreciate anyone's help, until now I"ve been only an addicted reader of this website, so please help , when I go into my file explorer, and attempt to put in the name of my computer(Reuben), it simply tells me it can't be found
afaik resco file explorer lets you browse computers over network no problem on the Hermes. Are you considering WM6 for your 8525??
I just tried connecting to my pc for the first time using Remote Desktop and works like a charm. I used this info to get me through this.
http://www.microsoft.com/windowsxp/using/mobility/getstarted/remoteintro.mspx
I did not go through all the steps mentioned, all I did was put a checkmark under REMOTE DESKTOP and ALLOW USERS TO CONNECT REMOTELY TO THIS COMPUTER.
reu15 said:
when I go into my file explorer, and attempt to put in the name of my computer(Reuben), it simply tells me it can't be found
Click to expand...
Click to collapse
Have you got a new router? Check and make sure that its network seperation is off. That stops you connecting to computers over the wireless.
Maz
network seperation?
I'm not sure about those devices you used but my iPaq 4155 connected to windows shared files differntly from the file explorer then my TyTN does. I'm not sure if this is what you are talking about.
The way you do it now is from File explorer:
Menu -> Open Path -> New Path
Then enter the network path ie \\Computer Name\Folder Name
Hope that's what you were looking for
that's exactly what I do, but then I get the error message, I am gonna reset me router and see what happens
reu15 said:
that's exactly what I do, but then I get the error message, I am gonna reset me router and see what happens
Click to expand...
Click to collapse
Dono - works fine for me. Make sure you're on the same subnet as the computer you are trying to connect to. Also make sure that computer doesn't have a firewall prohibitting connections (MS One Care does this as does I think the default MS Firewall - you have to turn on file sharing)
its just a simple networking. first, u must set your IP for wifi configuration manually & 'use server-assigned IP address' for pocket pc IEEE 802.11b/g bla bla bla as well. use resco explorer or total commander. it is so fun because i can play my huge video stored in my laptop directly in pocket pc even i'm in toilet (make sure file/folder sharing is enabled)
firstly resco is the best for this. if u aint got it, invest.
ensure file sharing installed on pc and u are mapping to the right share and it is all user access if possible
ensure on ur ppc u can connect to internet
try a diff pc to connect to share to limit issues to ppc and not ur pc
turn off firewall altogether
turn aff antivirus antispan and other internet protection
on ppc change wifi to connect to work not to internet
reset all devices.
use ur explorer to map a drive. if it doesnt auto show type it in full.
if all these fail ur gonna need to break this down to simpler stuff n piece meal test using pc to pc before using ppc.
the above also disables some serious security so once working piece meal them back on till u find what cut u off.
oh yeah one other beauty which allows u to change wifi connection type back to internet from work is to go into connections - exceptions and insert ur network ip address range. eg 192.168.* so it knows using this range is not an internet range.
these r some hints. i have had issues but usually pc file sharing, connection type or exception ranges.
failing this and u still need help we are going to need heaps of detail coving the PPC the wifi router and PC.
bearing in mind this should work even if troublesome for u. fiddle. if u can access the internet on ur ppc over wifi then it it is likey to be a pc based issue rather than ppc.
Simon
@Reu15
Be sure your firewall is not blocking this traffic. Check all logs to include those from SPAM and WORM protection. I can connect easy with total commander using my \\computer name only. Im still working on the remote display thing.
well, for what it's worth I tried and tried to do this with Resco and with Built in native file explorer and it wouldn't work. Slightly differnent in that I was trying to connect to my Samba server (linux)...but this should work fine, all other wifi PC laptops connect fine.
I read about an issue with this and tried the siggested fixes but I never got it working, annoying. The samba share never showed automatically. wierd.
I am very greatful for all your help, suggestions, and advice, but now I have a completely new problem, and its really got me pissed, please bear with me, but it has nothing to do with windows mobile so here goes:
while trying to follow this advice of an earlier post, (in windows xp) I right clicked on my computer icon on my desktop, went down to properties and selected, went over to the 2nd tab(computer name), and clicked the button for network ID, i selected the computer was part of a business betwork , but that it wasnt on a domain, that caused my main login screen to completely disappear, and now I have to log in my clicking ctrl+alt+del which is a pain, I want my login screen back...........
Samba - Linux
bingobob said:
well, for what it's worth I tried and tried to do this with Resco and with Built in native file explorer and it wouldn't work. Slightly differnent in that I was trying to connect to my Samba server (linux)...but this should work fine, all other wifi PC laptops connect fine.
I read about an issue with this and tried the siggested fixes but I never got it working, annoying. The samba share never showed automatically. wierd.
Click to expand...
Click to collapse
With Samba and windows I always have to manually configure my etc/samba.conf file. And make sure the user and permissions are set. You can also make it public just for testing. That will make it available for all users. Dont forget to add the same user/password in your linux box.
I am no GURU but my linux shares work perfectly with XP.
I have just managed to connect to my computer folders by using Resco file explorer and mapping network drive. I didn't need to change anything much and it worked straight away. Hope you've sorted it.
Windows Mobile 6 devices offer Internet Sharing feature for Bluetooth and USB. It works in this way that you start Internet Sharing application inside of your Windows Mobile phone and then other devices can share the Internet connection. What if you could fool Windows Mobile phone and instead of Bluetooth use WiFi? Would it be possible? Yes, it is:
how to use Internet Sharing over WiFi, which essentially makes the Hermes an Access Point.
Do the following:
1) Open Settings->Internet Sharing. Enable IS for Bluetooth PAN.
2) Change HKLM\Comm\ConnectionSharing\PrivateInterface to "TIACXWLN1" (it should currently be "BTPAN1").
3) Open Settings-> Connections -> Wi-Fi. Select Network Adapters tab. Click IEEE 802.11b/g Compatible Wi-Fi.
4) Enter IP address 192.168.1.1 and subnet mask 255.255.255.0. Click OK.
5) Select Wireless tab. Add New.. to add the Network name for your ad-hoc network (I prefer "adhoc"
6) Set the client computer to use the same ad-hoc network. Client will receive an IP address from the device (don't need to manually set the IP).
I got this from a different website.
detailed information on this topic you can fined at
http://forum.xda-developers.com/showthread.php?t=332360
edward
Edward!! you rock! this has got to be the sweetest thing, since wm6..for me atleast, Im actually posting from my old hacked OSX x86, I really cant believe this worked, but it did.
Thanks a ton for sharing the info.
Edward, Can you plse explain why you set the wifi adaptor to a fixed IP?
The 192.168.1.1 is as far as I know only valid if the router has the 192.168.1 range. For me it should be 192.168.123. ...
Thx for an explanation.
a cab would be perfect!
Yes! A very nice feature; could this be put in as a cab?
Or better, in the comm manager.....
Anyone?
aeroke said:
Edward, Can you plse explain why you set the wifi adaptor to a fixed IP?
The 192.168.1.1 is as far as I know only valid if the router has the 192.168.1 range. For me it should be 192.168.123. ...
Thx for an explanation.
Click to expand...
Click to collapse
Your phone is now the router.
edward-riko
I tried the steps to the letter however, I am unable to connect. I tried on one device running Schaps 3.54c & the other vp3G. I get confused after I complete the step "select wireless tab then add new." The new wireless network shows unavailable on my device" I think I'm unsure how to configure the connection on the PC side. I'm unable to get the wireless configurator to allow me to input a specific IP address. I'm using Windows XP Pro. Any help would be greatly appreciated.
OK, I have been resisting, but why would you do this.
If you are using wifi to access the Internet, and the phone and PC both have wifi (in order to use wifi sharing), why not just access the wifi directly from the PC? Sorry to be thick, but I don't see why you would want this?
todd_jg said:
OK, I have been resisting, but why would you do this.
If you are using wifi to access the Internet, and the phone and PC both have wifi (in order to use wifi sharing), why not just access the wifi directly from the PC? Sorry to be thick, but I don't see why you would want this?
Click to expand...
Click to collapse
and if you don't have WiFi access to the Internet but only cellular access?
cp1md2b said:
edward-riko
I tried the steps to the letter however, I am unable to connect. I tried on one device running Schaps 3.54c & the other vp3G. I get confused after I complete the step "select wireless tab then add new." The new wireless network shows unavailable on my device" I think I'm unsure how to configure the connection on the PC side. I'm unable to get the wireless configurator to allow me to input a specific IP address. I'm using Windows XP Pro. Any help would be greatly appreciated.
Click to expand...
Click to collapse
play with this some more it will work in the end
do it systematically
edward
edward-riko said:
and if you don't have WiFi access to the Internet but only cellular access?
Click to expand...
Click to collapse
Hah! I knew I must have been missing something. Thanks.
WiFi & WM5?
Does this work on WM5? The instructions don't seem to match for me. Can someone tell me how to do this on WM5?
Nautme said:
Does this work on WM5? The instructions don't seem to match for me. Can someone tell me how to do this on WM5?
Click to expand...
Click to collapse
no it will not
THANK YOU
I have tried this out and it apprears to work pretty well- thank you so much, I had hoped this would be figured out. i had the idea to do this but not the technical know how.
This is awesome
but you know what would be also interesting?
to be able to share the wifi connection over Bluetooth or usb instead of the cellular.
Basically using the phone as a wifi adapter.
What say you?
titan 6800
Has any one gotten this to work with the 6800? The registry key for bluetooth is different.
Thanks
Garvin.
edward-riko said:
Do the following:
1) Open Settings->Internet Sharing. Enable IS for Bluetooth PAN.
2) Change HKLM\Comm\ConnectionSharing\PrivateInterface to "TIACXWLN1" (it should currently be "BTPAN1").
3) Open Settings-> Connections -> Wi-Fi. Select Network Adapters tab. Click IEEE 802.11b/g Compatible Wi-Fi.
4) Enter IP address 192.168.1.1 and subnet mask 255.255.255.0. Click OK.
5) Select Wireless tab. Add New.. to add the Network name for your ad-hoc network (I prefer "adhoc"
6) Set the client computer to use the same ad-hoc network. Client will receive an IP address from the device (don't need to manually set the IP).
I got this from a different website.
Click to expand...
Click to collapse
Actually, it came from this site - we've been discussing it for days in the Development and Hacking forum! It was in this post by Fluxist who'd discovered it in the first place, and the other sites have been following suit... we're working on a more elegant way to do it now. And you directly quoted his post!
I'm going to be trying to write a full-on NAT router for it I think, although we're seeing if we can do a basic version for now.
man, i cannot belive this..
that is amazing
N2A said:
Actually, it came from this site - we've been discussing it for days in the Development and Hacking forum! It was in this post by Fluxist who'd discovered it in the first place, and the other sites have been following suit... we're working on a more elegant way to do it now. And you directly quoted his post!
I'm going to be trying to write a full-on NAT router for it I think, although we're seeing if we can do a basic version for now.
Click to expand...
Click to collapse
i took it from PPCGeeks forum
http://forum.ppcgeeks.com/showthread.php?t=9340
sorry if i a fended you in any way and good luck with your work
edward
killershot20 said:
This is awesome
but you know what would be also interesting?
to be able to share the wifi connection over Bluetooth or usb instead of the cellular.
Basically using the phone as a wifi adapter.
What say you?
Click to expand...
Click to collapse
I was thinking the same thing. I frequently stay in foreign hotels in which are "unwired." I'd love to use my phone as the registered device when buying wifi so that I could make VOIP calls and check my e-mails on ground and tether it to my notebook back in the roam. In Dubai, you can get hooked for $30 a day for wifi.
edward-riko said:
i took it from PPCGeeks forum
http://forum.ppcgeeks.com/showthread.php?t=9340
sorry if i a fended you in any way and good luck with your work
edward
Click to expand...
Click to collapse
Heh, it's cool dude - PPCGeeks got it from us - but check your research ;-) No point having duplicate threads.
my BA wm6 with default browser has this IE problem...
earlier this it works perfectly but when I opened it again it says "The address is not valid. Check the address ang try again."
I can't open the sites I usually open...
why is it like that?
can anyone help me with this??/
thank you..
well, i assume you understand the contents of that error message, the page could not be found!
first of all, you haven't given much information about your device or your internet connection, which would be essential for helping you, so i will give you a few tips what to check
when trying to access an internet site, your device connects to your router or your isp for a general data connection. then it needs a dns service to look up addresses you type in, then they are asked to transfer their data to your isp and then to your router or device.
so, the first thing you need to check is:
- is your data transfer working (check isp settings in device)
- or if you connect via wi-fi, check your router's settings
maybe your isp changed necessary settings
2nd, how good is your connection. sometimes a connection is just not stable enough to transfer data, maybe it worked before because you are right on the edge of "enough" and "not enough"
is your dns working, has it maybe changed?
and after all, have you tried -=downforeveryoneorjustme?=-, a service that will check, whether the sites you want to go to are actually online, or not.
maybe that didn't really help you, but to be able to have a more precise image of what is actually wrong there, you should really post more information, like:
model
rom
ie version
type of data connection
country
isp
does the internet not work in general, or just some sites?
give a sample site
and last but not least (although quite unrelated) do you have any browser add-ins, add-ons, extensions or other BS installed? or do the sites require any extensions like java or flash?
Chef_Tony said:
well, i assume you understand the contents of that error message, the page could not be found!
first of all, you haven't given much information about your device or your internet connection, which would be essential for helping you, so i will give you a few tips what to check
when trying to access an internet site, your device connects to your router or your isp for a general data connection. then it needs a dns service to look up addresses you type in, then they are asked to transfer their data to your isp and then to your router or device.
so, the first thing you need to check is:
- is your data transfer working (check isp settings in device)
- or if you connect via wi-fi, check your router's settings
maybe your isp changed necessary settings
2nd, how good is your connection. sometimes a connection is just not stable enough to transfer data, maybe it worked before because you are right on the edge of "enough" and "not enough"
is your dns working, has it maybe changed?
and after all, have you tried -=downforeveryoneorjustme?=-, a service that will check, whether the sites you want to go to are actually online, or not.
maybe that didn't really help you, but to be able to have a more precise image of what is actually wrong there, you should really post more information, like:
model
rom
ie version
type of data connection
country
isp
does the internet not work in general, or just some sites?
give a sample site
and last but not least (although quite unrelated) do you have any browser add-ins, add-ons, extensions or other BS installed? or do the sites require any extensions like java or flash?
Click to expand...
Click to collapse
here's some update...
ROM : 5.6 WWE (helmi wm6 by xplode)
MODEL : PH20B
IE version : default of wm6
COUNTRY : philipines...
my device is connected via activesync...
it was working real nice but i dont know what happened...