First off, please accept my apology if this question has been answered somewhere, but I feel like I have checked the farthest corners of XDA developers with no luck............
I cannot not seem to access my desktop computer's folders over wifi anymore...........
now i am no stranger to WM phones in anyway, I've had the mpx 200, 220, T-mobile sda, mda, cingular 2125, audiovox smt5600,and have been tweaking forever and now the Cingular 8525, I am running the LVSW(3/26)WM6 rom
I use to be able to access my folders very easily over my past devices, so I need your help???????????
I think it's a combination of my connection settings, and wifi settings, but who knows..........
anyhow I'd really appreciate anyone's help, until now I"ve been only an addicted reader of this website, so please help , when I go into my file explorer, and attempt to put in the name of my computer(Reuben), it simply tells me it can't be found
afaik resco file explorer lets you browse computers over network no problem on the Hermes. Are you considering WM6 for your 8525??
I just tried connecting to my pc for the first time using Remote Desktop and works like a charm. I used this info to get me through this.
http://www.microsoft.com/windowsxp/using/mobility/getstarted/remoteintro.mspx
I did not go through all the steps mentioned, all I did was put a checkmark under REMOTE DESKTOP and ALLOW USERS TO CONNECT REMOTELY TO THIS COMPUTER.
reu15 said:
when I go into my file explorer, and attempt to put in the name of my computer(Reuben), it simply tells me it can't be found
Click to expand...
Click to collapse
Have you got a new router? Check and make sure that its network seperation is off. That stops you connecting to computers over the wireless.
Maz
network seperation?
I'm not sure about those devices you used but my iPaq 4155 connected to windows shared files differntly from the file explorer then my TyTN does. I'm not sure if this is what you are talking about.
The way you do it now is from File explorer:
Menu -> Open Path -> New Path
Then enter the network path ie \\Computer Name\Folder Name
Hope that's what you were looking for
that's exactly what I do, but then I get the error message, I am gonna reset me router and see what happens
reu15 said:
that's exactly what I do, but then I get the error message, I am gonna reset me router and see what happens
Click to expand...
Click to collapse
Dono - works fine for me. Make sure you're on the same subnet as the computer you are trying to connect to. Also make sure that computer doesn't have a firewall prohibitting connections (MS One Care does this as does I think the default MS Firewall - you have to turn on file sharing)
its just a simple networking. first, u must set your IP for wifi configuration manually & 'use server-assigned IP address' for pocket pc IEEE 802.11b/g bla bla bla as well. use resco explorer or total commander. it is so fun because i can play my huge video stored in my laptop directly in pocket pc even i'm in toilet (make sure file/folder sharing is enabled)
firstly resco is the best for this. if u aint got it, invest.
ensure file sharing installed on pc and u are mapping to the right share and it is all user access if possible
ensure on ur ppc u can connect to internet
try a diff pc to connect to share to limit issues to ppc and not ur pc
turn off firewall altogether
turn aff antivirus antispan and other internet protection
on ppc change wifi to connect to work not to internet
reset all devices.
use ur explorer to map a drive. if it doesnt auto show type it in full.
if all these fail ur gonna need to break this down to simpler stuff n piece meal test using pc to pc before using ppc.
the above also disables some serious security so once working piece meal them back on till u find what cut u off.
oh yeah one other beauty which allows u to change wifi connection type back to internet from work is to go into connections - exceptions and insert ur network ip address range. eg 192.168.* so it knows using this range is not an internet range.
these r some hints. i have had issues but usually pc file sharing, connection type or exception ranges.
failing this and u still need help we are going to need heaps of detail coving the PPC the wifi router and PC.
bearing in mind this should work even if troublesome for u. fiddle. if u can access the internet on ur ppc over wifi then it it is likey to be a pc based issue rather than ppc.
Simon
@Reu15
Be sure your firewall is not blocking this traffic. Check all logs to include those from SPAM and WORM protection. I can connect easy with total commander using my \\computer name only. Im still working on the remote display thing.
well, for what it's worth I tried and tried to do this with Resco and with Built in native file explorer and it wouldn't work. Slightly differnent in that I was trying to connect to my Samba server (linux)...but this should work fine, all other wifi PC laptops connect fine.
I read about an issue with this and tried the siggested fixes but I never got it working, annoying. The samba share never showed automatically. wierd.
I am very greatful for all your help, suggestions, and advice, but now I have a completely new problem, and its really got me pissed, please bear with me, but it has nothing to do with windows mobile so here goes:
while trying to follow this advice of an earlier post, (in windows xp) I right clicked on my computer icon on my desktop, went down to properties and selected, went over to the 2nd tab(computer name), and clicked the button for network ID, i selected the computer was part of a business betwork , but that it wasnt on a domain, that caused my main login screen to completely disappear, and now I have to log in my clicking ctrl+alt+del which is a pain, I want my login screen back...........
Samba - Linux
bingobob said:
well, for what it's worth I tried and tried to do this with Resco and with Built in native file explorer and it wouldn't work. Slightly differnent in that I was trying to connect to my Samba server (linux)...but this should work fine, all other wifi PC laptops connect fine.
I read about an issue with this and tried the siggested fixes but I never got it working, annoying. The samba share never showed automatically. wierd.
Click to expand...
Click to collapse
With Samba and windows I always have to manually configure my etc/samba.conf file. And make sure the user and permissions are set. You can also make it public just for testing. That will make it available for all users. Dont forget to add the same user/password in your linux box.
I am no GURU but my linux shares work perfectly with XP.
I have just managed to connect to my computer folders by using Resco file explorer and mapping network drive. I didn't need to change anything much and it worked straight away. Hope you've sorted it.
Related
I have a WiFi network at home but am having trouble connecting in to get to our file server. I can browse the internet using the WiFi connection, but cannot seem to connect a networked drive. It is asking about VPN's and such, which we don't have
Anyone know how this is easily done? It might be easier if I can enter a username and password to log into the file server...
i'll take a stab at this. can you please clarify whether you are sharing a physical drive or a directory.
can you do a simple test by sharing a directory on your PC and install a demo of Resco Exprorer 2003 on you PPC. then try to browse your network with Resco Exprorer. you should be able to see the shared folder unless you have the workgroup and/or firewall misconfigured.
I installed Resco, it doesn't show any computers on the network, although we have 4 or 5 up and running on the network just fine right now.
If I try and add by IP or by PC name, it gives an error which is likely because you need a username and password to browse these PC's.
I think you have some network setting wrong on your PPC. There some setting that need to be set on your PPC to be able to access your shared rescources. Make sure your PPC has the same workgroup name. I have read others post that the AP was the problem. After switching to another brand of AP, they were able to browse the network resources.
When I hit a brick wall like this, I back up using Sprite Backup. Then do a hard reset. It's often more simple to troubleshoot the unit with baring installation. When I find the problem, I restore my current backup and fix it from there.
I know I'm not helping much, but there are so many variables to your problem. You'll just have to stick with it. We know that the WiFi works since you can browse the interent. I for one almost regretted buying this unit. But when I found a stable ROM and stable productivity applications, I don't think I can live without it.
nomadman said:
I think you have some network setting wrong on your PPC. There some setting that need to be set on your PPC to be able to access your shared rescources. Make sure your PPC has the same workgroup name.
Click to expand...
Click to collapse
But how do I find network settings like this?
Try going into the WiFi Setting and play with Work and Internet settings. I attached MyIpConfig for PPC. Extract the file and copy the extracted file in any directory on your PPC and run it. This will give you some information that may help troubleshoot. Make sure the WiFi adaptor is selected than go into the "More Info" option. This will give you the workgroup name.
Have you backed up and hard reset yet?
As a wifier with a pda2k , how does one know if he has been discovered by the network owner and in addition , where he has gone , not to mention the pda's security . My files can't be looked at can they? I need serious security assistance . My personal data may have allready been compromised! Damn .
Thank you.
(I'll just wait here on a secure network till I can secure my 'lil unit
Treat your PPC as if it were a portable computer running on celeron. As of the moment I can only recall maybe 4 known viri for Windows Mobile. If you are an avid WiFi'er as I am, try to browse your unit from your desptop pc without activesync activated. You might want to port scan the PPC as well. I run an FTP and web server on my unit (for my own purposes), and I have never had any files compromised unless I allow it. If you are really that peranoid, encrypt the files you don't want read without your permission.
Well I'm a Mac guy so browsing on a desktop won't happen. I just need to be able to surf annomously and not have the network owner view me or my files.
The netwqork admin will always know you are using the router because the wifi router assigns you an IP address. No getting around that. But it will be highly unlikely that he can access your unit resources unless you have a backdoor trojan running on your unit. If you don't know, google up "antivirus scanner for pocket pc", and install it.
Hey MACGUY have you seen PocketMAC? It could be useful!
SORRY i didnt mean to hijack your thread!
NOMADMAN - you said your are a wifi junky - How do I surf the net from my MDA3 using WIFI. Is appears that I can connect to my belkin wireless router but when I open IE - No page can be displayed and then it asks me to check my settings but then all the new connection settings doesnt include wifi connectivity? HELP!
meatychi said:
...How do I surf the net from my MDA3 using WIFI....HELP!
Click to expand...
Click to collapse
The are all kinds of info already posted here mate. What I would tell you here, I and many others have already posted in the past.
nomadman said:
The netwqork admin will always know you are using the router because the wifi router assigns you an IP address. No getting around that. But it will be highly unlikely that he can access your unit resources unless you have a backdoor trojan running on your unit. If you don't know, google up "antivirus scanner for pocket pc", and install it.
Click to expand...
Click to collapse
Thanks . I installed the viri scanner and found nothing. It maybe that the open AP is being tapped by someone else as well as me , explaining the third MAC address. Can this be possible? It's a ff.ff.ff.ff.ff
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
marcelser said:
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
Click to expand...
Click to collapse
do you use a proxy server for this pass through connection? what activesync partnership do you have setup "Guest" or a Normal one...
First to be able to use passthrough you must be connected to your PC via USB and thus connected to active sync. Active Sync should be fully set-up.
First question;
Can you synchronize your data through Active Sync 4.5.
If yes. Try to tick all the items in the desktop active sync> connections settings. On the space "this computer is connected to" select automatic
second: Can your PC connect to the internet?
If yes open the PC Internet Explorer and try to browse, then, while connected at USB, open Pocket Internet Explorer in your mobile and try to browse. You should be connected to the internet then. Good Luck!!
If still you wouldnt connect there must be wrong on your Active Sync partnership set-up
Two more tips:
1. Start/Settings/Connections/USB to PC - untic
2. http://pdaphonehome.com/forums/552203-post22.html
no proxy
walshieau said:
do you use a proxy server for this pass through connection? what activesync partnership do you have setup "Guest" or a Normal one...
Click to expand...
Click to collapse
I don't use any proxy server for connecting to the internet, my PC is directly connected to a NAT Router, as well as my linux box and my girlfriends computer and all work perfect.
As for the activesync partnership, where do I see the type of my partnership or in other words, what is a "guest" partnership? The only thing I see is that my device is named "WM_marc1" and that activesync items sync perfectly but the internet passthrough won't work.
I hope you can give me further advice with this information. Thanks for you help
docles2002 said:
First to be able to use passthrough you must be connected to your PC via USB and thus connected to active sync. Active Sync should be fully set-up.
First question;
Can you synchronize your data through Active Sync 4.5.
If yes. Try to tick all the items in the desktop active sync> connections settings. On the space "this computer is connected to" select automatic
second: Can your PC connect to the internet?
If yes open the PC Internet Explorer and try to browse, then, while connected at USB, open Pocket Internet Explorer in your mobile and try to browse. You should be connected to the internet then. Good Luck!!
If still you wouldnt connect there must be wrong on your Active Sync partnership set-up
Click to expand...
Click to collapse
My data synchronizes perfectly through AS 4.5 and I have already checked all items in connection settings. Of course my computer is connected to the internet (see reply to walshieau) and honestly IE and pocket IE have nothing to do with internet passthrough, it's all about TCP/IP subnetting, bridging, tunnelling or whatever method AS 4.5 uses for internet passthrough.
Sorry if i am not explicit...but i hope this helps. For my wizard i remember i had to install a reg on the PC. It did some changes to the Active Sync registry.
The bad is that i don't have that reg
marcelser said:
Hi,
Since AS 4.2 came out I have problems to use USB Internet passthrough in Activesync, als AS 4.5 did not solve this problem. I googled around a lot and also searched in xda forums but everyone is giving other instructions, some say this, some say it the other way. It also does not depend on the rom, I had the same problem on the wizard and now also with my TyTN on wm5 and wm6 roms.
So my question is: How to enable USB internet passthrough on ActiveSync 4.5? At the moment my desktop activesync is set to "automatic" in the connection settings, and on my device under Settings->Connections->Connections->Advanced->Select Networks I have "Orange Internet" as the connection which connects to the internet (which has in the proxy settings "this network connects to the internet" enabled). and the work connection is "My ISP" which has no settings at all. I tried to add a new network connection but didn't even know which Modem I have to choose and so I gave this up.
I also tried to set my desktop activesync to either use "Work" or "Internet" instead of automatic but when I try to use Opera, Internet Explorer or any other program like downloading the weather data all programs say that the host or page cannot be found or report a network error.
Can anyone help with this, I'm really very desperate... Cause I also tried to find the correct settings for hours now, but without luck...
Thanks for any help with this subject.
Click to expand...
Click to collapse
hi, I am using wm6(LVSW series, black Series and now Official Dopod release) on my hermes, everytime I can successfully connect to the internet via activesync using whatever program like pie, opera, spb insight, weather update, WML etc.
what I have done is simply unchecked the 'enable advanced network functionality' under start -> settings -> connections ->USB to PC and then plug the usb cable to my pc.
I use activesync 4.5.
hope this help
ctrlaltdel said:
hi, I am using wm6(LVSW series, black Series and now Official Dopod release) on my hermes, everytime I can successfully connect to the internet via activesync using whatever program like pie, opera, spb insight, weather update, WML etc.
what I have done is simply unchecked the 'enable advanced network functionality' under start -> settings -> connections ->USB to PC and then plug the usb cable to my pc.
I use activesync 4.5.
hope this help
Click to expand...
Click to collapse
YES WORKS UNDER VISTA TOO
simply check the 'allow data connections on device when conneted to the pc' under connection settings and then plug the usb cable to pc.
Heres the Fix
I had the same problem and this reg key fixed it for me 100%
Download this file AND RENAME IT TO lspvalue.reg
the double click on the reg file on your PC
Jules
ZaJules said:
I had the same problem and this reg key fixed it for me 100%
Download this file AND RENAME IT TO lspvalue.reg
the double click on the reg file on your PC
Jules
Click to expand...
Click to collapse
That's the one i was talking about, thanks i was going to need it too
Ok followed the procedures. I think anyone of them works. Mine worked by changing on PC activesync to "this computer is connected to: The Internet". Nothing else worked. I had the reg hack from the time of my beloved Wizard!
go to:
start -> settings -> connections -> advanced -> select network
make sure that
"programs that automaticaly connect to the internetshould connect using"
"my work network" and not "my isp"
then go to
start -> settings -> connections -> usb to pc
and make sure to uncheck "enable advanced network functionality"
that should do it
regards
H.S.
hsalah72 said:
then go to
start -> settings -> connections -> usb to pc
and make sure to uncheck "enable advanced network functionality"
that should do it
regards
H.S.
Click to expand...
Click to collapse
on my hp 6828, it doesnt seem to have the usb to pc option/icon.
tried the first part selecting connect to work.
I'm stil haveing a problem. any ideas?
maymaymay said:
Two more tips:
1. Start/Settings/Connections/USB to PC - untic
Click to expand...
Click to collapse
This one works for my TP
Goshh... I love this board !!
Thank you very much, maymaymay
Still not working
Why can't someone come up with an ACTUAL solution to this?
When I connect my Tilt to the PC it automatically passes the internet connection through the PC. I did the registry fix and tried all four settings (0, 1, 10, 11) and still my data connection on the phone is overridden by the active sync desktop pass-through. I turned off the advanced networking option and still it goes through the PC. I even went through all the settings in active sync for "This computer is connected to" even though that doesn't even look like it would affect which connection my phone uses. This seems more like a setting within active sync on the phone more than anything.
I use my phone at work for chatting on yahoo IM (with Palringo) since my company network is filtered. I use a program called MyMobiler to transfer the phone display and controls to the PC so I can use my desktop keyboard for the chat program instead of my phone's keypad. Since the network is filtered the internet connection on my phone is filtered too since it's passed through the desktop when I active sync it to use MyMobiler. Sometimes Palringo will hold the connection even after I've connected to the desktop and sometimes it won't.
Bottom line here is can someone come up with an real working solution to this problem that a LOT of people are having?
HOW TO DISABLE DESKTOP PASSTHROUGH WHEN CONNECTING WITH ACTIVESYNC. Search that on google and here and all you will find are people saying "Yeah I have that problem too" or people telling how to connect WITH desktop passthrough.
I have a similar issue. I have my phone connected to my work PC to charge / sync, but all Internet connections attempted by the phone are being routed through my work network until I unplug the USB.
Naturally, that's very bad since all Internet traffic is logged by my work and many sources are blocked. I have an unlimited data plan on my phone. Why can't I stay connected to it when I'm hooked to ActiveSync?
I read someplace that Windows Mobile has an order of preference where connections are concerned. Probably hard line, then wi-fi, 3G and then EDGE. Surely there must be some way to modify this order of preference.
The thread is missunderstood...
The problem here is give to the PPC internet via usb... providede by a PC...
The solution that REG (that works for me EVER!!!).
And now other one provide internet to my PC via usb on phone account
With apologies, I'm not sure I understood what you said there.
But, some of us are actually trying to stop receiving internet by the USB.
I would like the phone to initiate a wireless 3G connection even when connected to the PC. But, thus far, all settings I've tried still cause my phone to attempt to access my business network here at my company.
Big no-no.
have you finally solved the problem?
If so just like to ask if you have change your homepage in ppc? which is
file://windows/default_0409.htm?
and have not run your network wizard? then maybe I have the solution here
Reg key
HKEY_LOCAL_MACHINE\Software\Microsoft\Internet Explorer/AboutURLs/
usually it is ( default value )
A.Blank value is res://webview.dll/blank.htm
B.Home_0409 value isfile://windows/default_0409.htm
C.version_0409value isfile://windows/default_0409.htm
if there is a new reg in that one try to delete that file again using a registry explorer ( depends on what you use to view the file)
turn it off for about 30 secs then soft reset... I hope this helps out
I'm not sure that addresses the issue, or mine at least. My phone disables HSDPA the moment I plug the USB cable into the phone and Active Sync takes over. It's before I even open a browser.
Not only does the phone start looking for Internet over the USB Active Sync connection, it looks for non browser related things like weather updates and sending mail to the gmail server.
Somewhere, it's coded to have an order of preference in what kind of connection it accesses. By default, it seems to look for any available land line connection, possibly wi-fi next, then 3G and then EDGE. I'd like to take the land line connection completely out of the equation.
Hey Everyone,
I have just upgraded my device to Windows Mobile 6 so I had to install Activesync 4.5 and I would like to access my pc's internet connection (which is adsl) when it is connected via USB. But when I connect my device via USB it doesn't seem to have access to internet at all even though it should be automatic as far as I know. I guess some things should be done in settings but don't know what they exactly are. Would you be so kind as to help me by writing every single step I should take to make it work?
I would also like to access my pc's net via Bluetooth but I think it's going to be more difficult to set. I have a bluetooth adapter with Bluesoleil software and I don't know what I should do to synchronize my device with pc via bluetooth using Activesync 4.5. I guess after making it work, accessing my pc's net via Bluetooth wouldn't be a big problem.
I hope you have ideas what to do.
Thank you for your help in advance!
when in settings->networking->usb to pc->enable advanced network functions is checked
and connetions->advanced->select networks is set to my work network
when ever the pda is connected to activesync using usb or bluetooth
the network which is being used is that of the pc
unless the pc is set to otherwise
Thanks for your short reply. I have done as you wrote, but it still doesn't work.
at settings->connections->connections->My work Network there are 4 things:
-Add a new modem connection
-Edit my VPN servers (I have tried to add a VPN server but didn't know the exact settings)
-Set up my proxy server
-Manage existing connections (I have also added a cellular modem connection and *99# is supposed to be dialled but I didn't do any other settings)
So I guess there are things here that should be changed. For example at VPN, what should be the name of the Server? My computer's name? and there's a part at which it requires a Username and a Password and also a Domain marked with a *. What should I write in these fields? The usernam and password that are set to connecting to the internet on my pc or something else?
I might have to check the settings of my as well, I guess. What settings should be checked on it?
Thanks in advance!!!
I might have to check the settings of my pc as well, I guess.*
Sorry I left out a word.
settings->connections->connections->advanced->select networks
dropdownbox is set to my work network
to spell it more out
It is set that way, but it still doesn't work. This is why I think I should change things either on my pc or in My Work Network settings (the 4 menu points I mentioned). But I did everything the way you wrote in your first reply and despite this fact it still doesn't work. So I'm out of idea
My wifi will not connect!
it used to work, but now it wont connect. anywhere.
im sitting next to my wireless router now as i type, with my dash, and it still wont connect.
i cant get on opera mini, mobile, PIE, anything
ahhh, any ideas?
it just sits there telling me that its connecting.
hmm.
well thanks
jcrain11 said:
My wifi will not connect!
it used to work, but now it wont connect. anywhere.
im sitting next to my wireless router now as i type, with my dash, and it still wont connect.
i cant get on opera mini, mobile, PIE, anything
ahhh, any ideas?
it just sits there telling me that its connecting.
hmm.
well thanks
Click to expand...
Click to collapse
Have you reset your router power off 30sec and on? It may be your ISP, might not be your phone....
I may just be being silly because you say anywhere?
If your connection is password protected, make sure your phone is on the access list of your routers settings [192.168.0.1].
Check if you have the WiFiinit file in the /Windows/Startup folder
That was the problem with my dash, but i fixed it
hmm. ill try doing those.
ill let you know guys.
thanks
hmmm. So i got the Wifi to finally connect, but now none of my browsers work.
Neither Opera Mini, Opera Mobile, or PIE will work.
They just wont connect
Argggg. sometimes this makes me mad...
Spectating said:
If your connection is password protected, make sure your phone is on the access list of your routers settings [192.168.0.1].
Click to expand...
Click to collapse
I have a slightly similour problem ...
But it's password protected my wifi.
How do i grant access to my htc on a linksys router ?
My HTC IP is 192.168.0.1 ?
192.168.0.1 is the URL for your router settings on your computer. Type it on your computer in the address bar of IE. Once you login, it's pretty straight forward.
Spectating said:
192.168.0.1 is the URL for your router settings on your computer. Type it on your computer in the address bar of IE. Once you login, it's pretty straight forward.
Click to expand...
Click to collapse
Oh i see !
I guess it differs from router model ...
Mine is 192.168.1.1 !
I'm getting a hard time setting up the connection !
borov5 said:
Check if you have the WiFiinit file in the /Windows/Startup folder
That was the problem with my dash, but i fixed it
Click to expand...
Click to collapse
How do you get to that? I have the same problem and it is not the router (I am on my Laptop) and Live search is not working. I added the data plan on my phone and it is not connecting to anything. I love my Dash and I need help so i can perform CPR on it.
Blackshaolin_7 said:
How do you get to that? I have the same problem and it is not the router (I am on my Laptop) and Live search is not working. I added the data plan on my phone and it is not connecting to anything. I love my Dash and I need help so i can perform CPR on it.
Click to expand...
Click to collapse
On the Dash you can go Resco File Explorer Windows\StartUp or you can view via on Comp via Active Sync or Mobile device center "depending on os" Just make sure in folder options you have show hidden files Tools\Folder Options\View\Show hidden files and folders.
Well i deleted my WiFi inti file some time ago, what can i do to get it back?
You can nick a copy of mine
Same problem, though have wifiinit in my startup folder
Hello,
I have WIFI init in my startup folder, however, the WIFI does not start. It tries for three seconds then stops again. It was working with the original ROM, but when flahed to Kavana, it stopped working. Any help?
When I checked the WLAN settings, I found that the drivers are not loaded.
this could help you...