After I run EnterBL.exe I saw screen on my UNI such as USB or SERIAL on top of screen and v1.00 on bottom of screen.
Propably I should run something on a PC but I run Radio upgrade only 10600 for some reason :roll: and now all I can see is QTEK splash screen with information like radio version etc... and that is all
What I can do now?
I tried to run the new T-mobile ROM (because it originally is mda-pro from t-mobile uk) but there is connection problem...
Help
Related
Dear all,
I just got my imate jam (sold in Telstra shop in Australia) on last Friday, yesterday, I tried to upgrade the ROM as followed the instructions from http://www.clubimate.com/.
As imate jam has only one USB port which is connected to PC (Microsoft Active Sync 3.8) and there is no cradle, only 30s after I tried to update the ROM, then the USB is disconnected suddenly, and after that my Imate Jam has a black screen (it's like the backlight has been set to the lowest setting). I can see the word Serial 1.0, and if I try to connect to the USB again, it will display USB 1.0. Nothing more than that. Soft or Hard Reset doesn't change anything
Anyone knows how to bring it back to life, otherwise, I will return to the Shop since I only bought it for 3 days, hopefully, they will give me a new unit to replace this "dead" Jam :evil:
When I did the upgrade, the battery is at 100%, so there is enough power, but I can't understand why.
The ROM & Instruction are download from the page
http://www.clubimate.com/index.asp?PageAction=JAM
I've downloaded the Generic version of the ROM with the name ma_cdlsku1_wwe_10300_143_10100_ship.exe (28 MB)
with the following information :
The details of the current ROM image (found under Start -> Settings -> Device Info):
Rom version 1.03.00 WWE
Radio version 1.01.00
ExtROM version 1.03.143 WWE (Generic)
(PS. Sorry you may not be able to see that particular page and instruction if you are not a member for that site)
Any suggestions are highly appreciated.
Cheers
Wallace
PS. One more question, how likely is it for the Imate Jam / O2 XDA2 Mini to upgrade to Windows 2005 Mobile once it is available??
You are luckily in the Bootloader mode. I crashed during my PDA2K upgrade and found settings to get it into Bootloader mode and the upgrade was able to rerun and put the ROMs back in place. Try disconnecting, rebooting your PC (start clean), then, with the Jam in Bootloader mode still, relaunch the upgrade utility. Let me know if that works.
Also, do a search here on how to get the Bootloader to launch on your JAM if you need to pull your battery and power it back up again to it.
Oops ...
I've returned my imate Jam to the shop, and for some reason, they can do a hard reset on the phone (which I tried to press the power button and the reset buttons many times before), and so the screen comes up ...
And of course I told them I lost confidence in the phone blah blah ... and I want to replace a new phone ... So now they have sent my phone back to Telstra and need the Telecom's approval for a replacement unit ...
Once they approve it (it takes a week they said), I will ask for an O2 XDAII Mini instead. As in Australia, the imate phone has been customized by Telstra so it will by default shows the ugly logo of Telstra, whereas O2 will still display O2, and it has the options to choose which provider under "programs" ...
In the first 2 days, I need to soft reset the imate jam quite a number of times, I set the password so after the phone is unused, it will be locked ... but sometimes when I tried to unlock it, I couldn't ... I mean the number pad (virtually in the screen) has no reaction when I pressed it ... so I was forced to reset the imate jam a number of times, I suspect it might be problems from Telstra's customisation to the phone, but anything can happen so I just guess ...
Hope to get a new replacement phone soon ... as I only got the phone for 3 days ...
could anyone help me out of a mess please , i have recently purchased an mda3 to replace my xda2 , i unlocked the phone which went ok but wouldnt accept my o2 sim , being the same phone as the xda2s i thought maybe it would need the o2 windows version rom on , i selected the wrong rom from my pc and the upgrade stopped after a few seconds stating it was the wrong version but now the phone has no rom on at all just a dark screen with "serial" or "usb" if it is docked . Have i done permanent damage ? any help would be very much appreciated
Your phone is currently in bootloader mode - if you have a valid ROM for your device you should be able to flash it with the phone in the USB cradle (the dark screen should change to USB).
If you don't have a valid ROM, go check out the wiki, there's plenty to choose from there!
many thanks forza , as u can prob guess im new at this !
sorry to be a pain forza but unsure which files on the ftp to use , doesnt have to be the latest rom i just need it to work again , could you also tell me how to execute the files , do they load from the desktop , many thanks bren the amatuer
This page on the wiki lists the available original ROM packages;
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
The T-Mobile UK one (1.42) is the latest version ROM (3rd on the list), so I'd recommend you start with that (it's the one I use).
[EDIT] just noticed you're showing as being on O2, further down the list (almost at the bottom of the first section) there's a UK O2 ROM - that may be better for you.
With the phone docked in the cradle (with USB showing on the screen), you can just the run the exe you downloaded and it should flash it for you.
thanks forza ! your a star worked a treat
qtek 9090 with USB V2.06 message error
I have the same problem with my qtek 9090, but I dont can sync my pocket pc. I see only USB V2.06 if the pocket is full charged ( and serial if not on the crable connected ).
Why I can not sync this with my laptop??
I have make a hard reset but still not work!!!
please help me
I have read many post but nothing found...
thank you
scharmander ( newbee )
I updated my rom from the original spanish version to a Artemis_Touch_3.01
After some use, the device is blocked.
It starts the HArd reset, after "Format messages" It starts HTC white screen
IPL 3.13.0001
SPL 3.13.0000
and nothing more
.
It also works ROM update mode (Three colors screen) but when I execute the Rom update frommy pc, it reaches 2/3% and gives different Errors depending the ROM,
"Ivalid Vender ID [294] when I use the ROM HTC_P3300_SPA_3.13.412.1_4.1.13.44_02.94.90_Ship_R
ERROR [270]: Update Error -The Image File is corrupted - When I use Black & Blue 4.3 or Artemis_Touch_3.01
I need help!!!
brick?
hello,
First you must open the bootloader menu,
hold voice dial button and press soft reset.
If this not working hold voice dial and on/off button and softreset.
You must connect first your htc with your pc and the start the bootloader.
When you are in the bootloader menu, you can upload an orginal fabricrom to your htc.
Search xda-developer for the fabric rom.
And then you can change your rom for something else but don't forget the uspl.
When you want to change image you must install the uspl first otherwise everthing will blocked
the problem you have is that you have to run the uspl first before you can flash another firmware. If you run the uspl you will see that the spl loader of your device is version 1.11.000 and than you can flash an other rom of your choice
greetzz Patrick
uspl does not work. this is the point you can not get it.
have a problem but I cannot find anything useful for my case, maybe you can help me?
pvdhelm said:
the problem you have is that you have to run the uspl first before you can flash another firmware. If you run the uspl you will see that the spl loader of your device is version 1.11.000 and than you can flash an other rom of your choice
greetzz Patrick
Click to expand...
Click to collapse
Hi Patrick,
I have a dutch rom on my htc P3300
IPL: 1.12.0001
SPL: 1.12.0000
GSM: 02.67.90
os: 1.12.0.0
my HTC remains stuck on the startup screen (logo HTC) and will not get any further.
Connection with active synch is not possible, ans holding the buttons reset-voice rec-on/off buttons don't react. WM cannot be started in that way.
is it possible to find a boot program which allows me to start up WM again like a regular PC? something like a emergency startup disk? I have a 2GB micro SD card. After reading and trying so many things, I lost the way in this site and was hoping maybe you can send me some useful links that can solve my problem? I would appriciate the effort.I don't know if it's allowed to send my personal emailadress? If it is allowed please let me know. Maybe we can exchange directly some info, otherwise I don't have a problem mailing this site.
(I hope I can find this thread again after closing?)
Kind regards , Eli
my artemis is also in the same state
Hi All,
Please help me with problem which I am facing with my HTC P3300
When i switch it on..Its stuck in the state where it shows
IPL 3.07.0001
SPL 1.11.0000
GSM 03.08.90
OS 3.4.0.0
What I tried.
1. I tried USPL , its not loading as device is not getting detected in my laptop.
2. Volume Down+Reset is not working
Please help me with this
Hi Guys
Currently i got the HTC HD with the next configuration
Rom version: 1.18.707.3 (23358)WWE
ROM date: 12/10/08
Radio version 1.09.25.14
protocol version 52.49a.25.26U
SPL-1.14.0000
BLAC100 32 m
I gone to bootloader and connected cable USB ( i see at the bottom of the device USB).
The ActiveSync is not green (mean it's not connecting), after reading again some posts i understand that the active sync shouldn't be green, as soon as i see USB, the PC and mobile connected.
Then i started with the HSPLWrapper_Blackstone_156OliNex.exe installation, when i press "Update" button then the original version is blank but the future version is 1.56 Olinex which is correct ( I think so) ?
The whole upgrade procedure stuck on 0% on the device and after 2 mins i gets the restore button on the PC (HSPLWrapper_Blackstone_156OliNex.exe installation).
Maybe i am missing something, in addition i saw some flush through SD card, but i think the better wasy if from the PC -> Mobile.
Any assistance will be appreciated.
Thanks for Help.
I am having the same issue.
Hi people
my p3300 keeps freezing after a few seconds on booting, it gets stuck on the boot screen where it displays your spl and gsm versions, also when i put it into bootloader it freezes if im quick enough to attach the usb cable the screen fades away to nothing.
does anyone have an idea i have even tried hard resetting but it says "format failed"
here is my setup
ipl - 1.14.0001
spl - 1.14.0000
gsm - 02.67.90
os - 1.14.0.0
it was running wm2005
my computer is win7 ultimate 32bit
any help will be appreciated
no help at all !
please guys
I have the exact same problem:
ipl - 1.14.0001
spl - 1.14.0000
gsm - 02.67.90
os - 1.14.0.0
it was running wm2005
only exception is that mine agrees to hardreset ... "Format is complete"
I have replaced the battery with a new and charged it before trying to boot.
I can enter the bootloader (this 3 colored screen) but I'm not really sure on what is safe to do from there.
I would prefer to try and put a original ROM from htc.com on the device but they have removed p3300 rom's from the download page
I have not used the device for half a year or so... is it a y2k10 problem ?!
looks like I found the solution.
I managed to put a old rom onto the p3300 from my SDCard described here
wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing