for some reason when i get calls or make a call my internet connection drops off. is there any reg setting to keep it alive? i have the hp ipaq 6515 wm2003.
Related
I have Skype runing fine on my PDA2K using WIFI however it doesn't seem to work at all well when I have only a GPRS connection.
I have a Vodafone SE V800 3G/UTMS phone and had 3G data working with an IPAQ 5550 although didn't get a chance to try it with Skype before getting my PDA2K.
Unfortunately the dialup networking client option that was in the bluetooth manager on the IPAQ appears to be missing on the PDA2K. Somebody has done this before on a XDA II see http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=58&PN=1
however it looks like it is with an old version of the MS BT stack which I cannot load on to my device.
ROM ver: 1.22.00 WWE
ROM date: 10/22/04
Radio Ver: 1.06.00
Protocol ver: 1337.38
ExtROM: 1.22.162 WWE
Using broadcom BT-PPC/PE version 1.0.0 Build 3500
Any ideas.
Graham :?
Which GPRS service offering are you using? If you are using the bulk MediaNet from Cingular then I suspect if won't work. That GPRS connection is designed to support WAP and email only, so it only allows the use of certain ports. I don't know which ports SKYPE uses, but I don't think it's limited to Port 80.
It is Vodafone UK's mobile connect 3G/GPRS solution which on 3g is up to 384kbps download and it hands over to GPRS when outside of 3G coverage. I doesn't appear to be limited to specific ports as it works with HTTP, VPN, POP3, IMAP. There is an option to use Port 80 on the PC Skype app but I can't see that option on the pocket PC. At the moment I can't get even get my PDA2K to connect to my phone other than through a serial port. I will test Skype with a PC connected to my 3G phone to see if the data side works however it would be great for other apps if I could use the speedier 3G data connection through my PDA2K
grahamp said:
It is Vodafone UK's mobile connect 3G/GPRS solution which on 3g is up to 384kbps download and it hands over to GPRS when outside of 3G coverage. I doesn't appear to be limited to specific ports as it works with HTTP, VPN, POP3, IMAP. There is an option to use Port 80 on the PC Skype app but I can't see that option on the pocket PC. At the moment I can't get even get my PDA2K to connect to my phone other than through a serial port. I will test Skype with a PC connected to my 3G phone to see if the data side works however it would be great for other apps if I could use the speedier 3G data connection through my PDA2K
Click to expand...
Click to collapse
The PDA2K is a 2.5G device - so 3G will not be possible through it.
Are you able to connect to other non-web services via your GPRS connection such as email or msn or the likes? I know with O2 you have an O2 Active connection for web/wap and Mobile Internet for everything else.
You could try to get a freeware telnet client and telnet to the skype server on port 80 to see if it can resolve and reach it - this is one way to prove if your connection will allow it.
Both O2 2.5G (PDA2k) and my Vodafone 3G connections (v800) work no problem. I have a connection from my PDA2K to my 3G phone using the 3G modem in the V800 phone across the infrared connection and Skype connects and works. I however want to use Bluetooth rather than infrared as I have to hold my v800 phone right opposite the infrared port on my PDA2K for it all to work. I can't however find a way to create a bluetooth dial up networking connection to my V800 on the PDA2K. On my IPAQ 5550 I had a Bluetooth dial-up connection to the same phone and it worked fine on 3G. :roll:
they troubleshooted that problem at some time (Bt dial up) of our BT
Greetings
GPRS is not fast enough for making a skype call. It would also cost you a *fortune* in GPRS useage charges!!
3G is find in the down direction, but for VoIP, upstream is just as important. Anyone know what Voda 3G does upstream?
Nigel
veletron said:
GPRS is not fast enough for making a skype call. It would also cost you a *fortune* in GPRS useage charges!!
3G is find in the down direction, but for VoIP, upstream is just as important. Anyone know what Voda 3G does upstream?
Nigel
Click to expand...
Click to collapse
I was talking on skype over GPRS yesterday. Worked flawlessly. No delay on voice and no cutting of voice.
True, with the wrong GPRS plan you run up a cost, but otherwise it works fine.
3G's major flaw is the bandwidth limitation per AP. At 2mbit it just doesn't work well in populated areas. Besides, most 3G operators frown upon VoIP and file transfers over their network, hence trying to block it. Skype is hard to block since it cleverly looks for open ports, however, that causes voice cutouts and delays.
Hah! Try T-Mobile GPRS lmao. There is no way you can use SKYPE with TMO in US. NO WAY! If someone says you can there are full of sh.. I have a PDA2K and a XDA IIs. I tested them both with GPRS and it sounds like shi.. The only way SKYPE will work with no problems is with WIFI.
Vodafone 3G here in the UK maximum upload speed is 64kbps which IMHO should be enough for SKYPE latency could be a problem though. Unfortunately no futher forward in getting my PDA2K to dial up to 3G phone using Bluetooth. Does anybody know of a cradle that can hold the PDA2K and V800 so that the infrared ports face each other :lol:
Buying an xda2s and will join soon
You might look a bit like dom jollie when walking down the street though LOL. I use a voip and sip client on my 5550 and use this by the multitude of wifi access points around London.I have a voip pbx back at the office that i connect to and make calls from(out to the real world not to just other skype users) I have tried skype over GPRS 3G and wifi and found because of the limited bandwidth it worked in lumps of seconds at a time but was not consistant enough to be able to hold a conversation for longer than a couple of seconds (via gprs - Voda uk) and 3Gwork slightly smoother but still not as consistant as on wifi.This i can only put down to congestion on the networks.. Anyway i suppose i ambiased as i have access to pbx voip remotely..Another cheap way to make calls..LOL :lol:
Regards
Marquee
www.marqnet.net
Hi there!
Has anyone an idea, how to make the Wifi and the Blackberry GPRS
Connection work at the same time?
It drives me nuts, as i am turning on WIFI, the Blackberry GPRS gets
disconnected. BUT, in 99% of the cases it reconnects the GPRS within
5 seconds. So there is not enough time to connect to any WIFI AP.
As i want to sync via WIFI its very annoying.
I know i can turn of the Radio, so that GPRS is disabled, but then
i cannot receive any phone calls, thats NOT what i want.
Any ideas, anyone???
cheers
Darwin69
PS: i forgot: Using Blueangel MDA III from Austrian T-Mobile, with newest Austrian German ROM from T-Mobile (like the one on the xda ftp).
PPS: Thanx for the extrom unlocking tool, really good stuff.
I must admit, I've never had that problem, but I make sure that I close ALL applications before turning on the WiFi. It can take 10-20 seconds for the WiFi interface to estbalish a connection and get an IP address. During that time, the device will try and connect via GPRS when you launch email, internet explorer etc
Hi!
The great problem is not an application. the problem is the
blackberry service, which you cannot deactivate without loosing
all data and settings :evil:
thanks to t-mobile
cheers
darwin69
Ouch that could get expensive if you didn't realise - I'm glad I don't have blackberry services, just plain old POP3 & SMTP email
hi!
no it actually doesnt, because t-moblle has an extra gprs setting for the blackberry client. when you are connected with the blackberry gprs, there are no costs. on the other hand, you can only use the blackberry service with this gprs connection, no internet, nothing.
its really annoying. No one else any ideas about that ??? pleeeease :roll:
cheers
darwin69
Blackberry and GPRS
Hi,
just use a taskmanager like "supertasks" which supports starting and stopping of services. Go to the services tab and stop the blackberry service. Then you can use WiFi as you like and afterwards you just turn on the service again. Nice handling so.
Wolfgang
All,
My laptop has bluetooth and I would like to use this connection with my BA to make a dial up to a connection to an ISP. Is this possible? I know there are guides to use the BA as a connection to my GPRS connection, but this is not what I want.
In fact, I actually want to install the BA as a 'modem' in Windows XP, as I will be using NetOp to actually dial the number. I feel I am close, but not quite there. I figure it may be that I need initialization commands, but the only guides I can see are for the GPRS connection. I want my BA to do the screechy thing to another Dial-Up modem.
Any ideas would be appreciated.
Darren
hey guys,
i'm sure this has been asked, cant find the thread...
wifi on wm6 seems to dis-connect when vario II goes into standby...
and looses watever net connection u on...
anyway of sorting this???
dude, does your computer use the internet (WiFi not Ethernet) if it's on standby? I believe it does that to save you some precious power. Be happy.
Freeksta said:
wifi on wm6 seems to dis-connect when vario II goes into standby...
and looses watever net connection u on...
anyway of sorting this???
Click to expand...
Click to collapse
This is a default behaviour of windows mobile (even version 5 already did this) and the software that uses the wi-fi connection should take this into account.
(skype for example has an option to "avoid device suspend" when open)
I'd like to know if there's an easy way to keep the Wifi on in standby too, yes I know battery life will suffer, but that's my choice. I want the wifi on constantly for incoming VoIP calls to the mobile.
Is there anythingout there (appart from skype, i dont use skype for voip) that will keep the connection alive in standby?
Thanks
you may simply turn the screen off and this will keep the connection. not a good solution but it works, open wmp and assign a key for 'toggle screen', then you can turn the screen off easily
Hi,
with my old device (a XDA rebranded Touch Cruise) the internet sharing had the fine capability of keeping the bluetooth PAN connection alive even when the GPRS/3G connection broke down. It then tried to reestablish the GPRS/3G connection and sooner or later things fixed itself. The internet sharing app on the TP2 seems to disconnect the bluetooth PAN when the GPRS/3G connection goes down, which is quite an annoyance since i have to manually reestablish both connections all the time and this can become quite tiresome on a train ride where connection quality varies greatly within minutes. Does anyone know a registry tweak or something to make the application behave like the old one?
Kind regards,
Kork