Hi Guys I've actually had this all working before but after much messing to be honest and wasn't sure what got what working
OK firstly I don't have a manual for my XDAIIs but I'm pretty technically savvy so this isn't too much of a problem (until now) My dilemma is that when setting up my connection firstly I'm unsure if I need to select "Work" or "The Internet" on first initialising my Wifi LAN (I have however tried both).
When I choose Internet and use my network key I get access to the internet but no MSN Messenger access. After this non-connection with MSN I can't access the internet again even though I turn off the wifi and back on to re-initialise it ?????
In the past I'm sure I used "Work" to connect and I'm not sure if I ticked "this networks connects to internet" from within the proxy settings and as I mentioned Internet and Messenger both connected flawlessly.
Can someone please give me some pointers as to what I should be connecting to as in "Internet" or "Work" and possibly what I need enabled/disabled.
Is "Work" like a PC LAN which you would use for broadband for example, as if this is so I guess I'd use this ??? And the "Internet" simply uses your network settings / dialup settings ? (I'm just unsure). Today I had Orange dialog pop up when using "Internet" after a period of inconnectivity which I've never had before when I had both Internet and MSN working (Bloody hard resets).
I probably sound like Im waffling here but just trying to give as much information as possible to help ascertain where I'm going wrong. The setup is a wireless router directly connected to a broadband connection. It's WEP and I have network Key.
Any pointers greatly appreciated, especially as to the "Internet" or "Work" choice as I'm unsure which is which.
Thx in advance.
---------------
ROM: 1.40.00 WWE
ROM Date : 03/10/05
Radio: 1.12.00
Protocol: 1337.42
ExtROM: 1.40.176 WWE
Upgraded to Windows Mobile 5, all is now sweeeeet!
Related
I've got an SX66
ROM VER: 1.33.10 WWE
ROM DATE: 1/21/05
RADIO VER: 1.02.10
I setup wireless manager to work on my home network. At the heart is a linksys BEFW11s4 wireless router with WEP enabled (64 bit).
It asked for the security password which I entered but it kept telling me was wrong. Finally it stopped asking me and the wireless manager show that I am connected to the network. It shows the correct SSID, channel etc.
However I still cannot access the internet or anything else on my network. It seems that I am not really connected.
What the H$!! am I doing wrong??
Please help.
Did the router give you an IP address?
I.e. Is the router DHCP enabled?
Happygoat
Yes it does give me an IP address (SX66 set to auto assign)
In reading over your post I started checking my settings and realized the problem.
I have to manually enter the key.
Once I did that...boom I am online.
Thank you for your help.
Joe
@HappyGoat
Hi I have had some problems with wifi hope you can help. I couldn’t find anything on this forum about it (maybe I didn’t search well but don’t think so) Listen, I managed to find some hotspots, I used a lot of programmes, like Streethawk, or WIFIFORM(or something like that), and many more, but all I could get was windows popping up to select connect using that and that to internet or work. I tried work, but that is it every time I got the message I couldn’t give you IP or something. like that. My Ip settings is give IP automatically. Am I doing everything ok, or is this problem network issue because I was trying to connect on public hotspot(which might be not accepting connections). And how do I know if the hotspot is accepting connections free of charge? Hope you can give me detailed instructions.
Thanks in advance
ilijamn: I use a programme called "WIFIFOFUM" and when in the programme on the left side of the window is a column called "WEP" which will either say "on" or "off" for a certain connection.. now when it says "on" you cannot use it without a network key(basically a password) but when its "off" you should be able to use without a problem...To connect to a connection while in WIFIFOFUM jus tap and hold the connection and select connect...
now also when that window pops up, its better to sellect connect via "internet" rather than "work"....
I hope this helps you...
@tradivise
Thank you it helped me a lot! But sometimes in WiForum it takes a lot of time to connect, and I tryed a lot of programmes and then I downloaded Street HAwk, It is the best one, at least for me.(the progremme does everything automativly-which is cool). Anyways, i have to ask you smth. else (prob. stupid question), when a network(hot spot) is free of charge do I need to set up IP settings and DNS settings and what is VPN?
Thanks
@tradivise
Thank you it helped me a lot! But sometimes in WiForum it takes a lot of time to connect, and I tryed a lot of programmes and then I downloaded Street HAwk, It is the best one, at least for me.(the progremme does everything automativly-which is cool). Anyways, i have to ask you smth. else (prob. stupid question), when a network(hot spot) is free of charge do I need to set up IP settings and DNS settings and what is VPN?
And is there any pocket web browser for internet that can open multiple widows(tabs)????
Thanks in advance,
Ilija
ilijamn:
VPN - Virtual Private Network, long explanation so just google search it.
IP and DNS should be setup automatically by the network, but some networks require a network key (WEP) which is like a password and without it you cant use their network...
hope this helps, any more questions jus ask!!!!
not sure about multiple tabs, if i find i will let u know
That should do it. Thank you
It wanted that you helped me, I have a 9600 HTC qtek 9600, I connect wifi and it detects networks to me but however when I give him to connect is connected to me through GPRS with which they receive to me, since I do so that it does not connect by GPRS and am free?
i have windows mobile 6 with custel v2.0.2
thanks
3 banannas emu monkey wifi gprs monkey
like adjustment the monkey of wifi?
alvarogemelo said:
It wanted that you helped me, I have a 9600 HTC qtek 9600, I connect wifi and it detects networks to me but however when I give him to connect is connected to me through GPRS with which they receive to me, since I do so that it does not connect by GPRS and am free?
i have windows mobile 6 with custel v2.0.2
thanks
Click to expand...
Click to collapse
Damn..your English is bad.. how old are you, you sound like a 6 year old disabled..
Moderation - Bram87 this kind of language is offensive and un-necessary. We are a helping community here, so more tolerance please!
sorry,I´m spanish and the traductions is by google
help me please
type in spanish, let someone that speaks spanish on the forum translate it because that was horrible and i dont know what the hell the problem is...
Ok, I think I understood the question (because I speak spanish also and I have a similar problem). The problem is that when WiFi is working (and everything OK:IP address, etc) and you start PIE, then it tries to enable GPRS (or HSDPA)... I tried all possible combinations (Network Card connects Internet or Work...) and PIE always tries to connect through GPRS (or HSPDA).
Am I missing any setting?
Is it possible to setup PIE with WiFi and MMS with GPRS at the same time?
PD. Hope my english is not so broken
Try to look under Settings/Connections/Advanced...the Select Networks options...under Programs that automatically connet to a private network should connect using...choose "My Work Network"
It works for me...
Regards,
Primoz
It somehow work.. I have to repeat that several times and then it works...
Anyway, Is there any way to fix PIE with WiFi and the other things with GPRS or we have to change the settings everytime (really annoying)?
disable cing proxy
i have a orange m3100 version of the hermes.
recently i flashed it with schaps 3.54b rom
now i can't use my wifi router/network @ home nor another wifi router/network @ work.
in fact i'm well connected, i'm sure of this because from another computer of the networks, i can ping the (static) ip of my hermes. i tried changing and changing again my ip and tested it.
but the hermes cant go on internet.
i use the right gateway and DNS in each case but no surf in pocket ie.
any solutions or other tests i can do?
in french if possible since i and my rom are in french.
thank you.
update : i made some tests :
it is nos a dns problem : i put the right gateway and dns on the smartphone but i cant get a website by typing its ip in pocket ie adress bar (other browsers dont work better) and i cant even access my router admin interface.
when i'm trying wifi with static ip or dhcp on my m3100, i can ping its ip from another computer of my networks and the smartphone responds ok, and i can see its mac adress in the connected clients on my router config screen. But the smartphone can't ping anyone.
i asked a friend who told me that the proxy (192.168.10.100 :8080 ) used for the connection to orangeworld in gprs/edge is also used when i try to connect via wifi and that is why it cant connect nowhere because my personal network is configured differently and without a proxy.
if i delete the proxy my connections will cost me more when i use gprs.
if i configure my router like this (192.168.10.xxx) with a proxy on 8080 it could work but only on my network and not @ my workplace or somewhere else where network params will be different.
any ideas or solutions ?
wow ! so many people trying to help :/
well i found a temporary solution to my problem, probably not the best one but the best i can do by myself so if someone wants to help : thank you
it was actually a proxy problem.
i looked in the registry and found a key where the proxy adress was detailed : 192.168.10.100:8080
i have exported this value as "proxon.reg"
then i modified the value by deleting its content and i exported the empty value as "proxoff.reg"
now i have my "proxy switch".
before activating the wifi and starting ie, i lauch "proxoff.reg" which clean the registry for the proxy data and magic : ie connects fine.
and when i want tu surf via my provider orange, i desactivate the wifi and launch "proxon.reg" which restore the correct proxy data to the registry. and i can surf on gprs/edge.
all this is fine when i switch off the phone functions in the comm manager.
but now i need someone to tell me how i can automatize this for the wifi and edge connections because if the wifi signal gets too weak, i dont want my phone to switch to the gsm when the proxy is desactivated.
i hope you can understand my english.
please help.
In the last version of BatteryStatus (http://forum.xda-developers.com/showthread.php?t=270751) you can find,among the others stuffs, the "Disable Proxy for WiFi" option (see the Tools tab)... Maybe more simple than "regg-in" on and off? I'm ok with it, try and see if it's ok for you also...
Bye!
hey kamaal i just downloaded the batterstatus program but im not seeing the "Disable Proxy for WiFi" option in the Tools tab
***edit:
sorry i downloaded the extended version beta and it was there
Hi Chaps,
I have an o2 xda iis, which I've cherished for many years. A few months ago I managed to upgrade it's original, awful buggy software to wm6.5 which has thankfully put an end to the constant crashing but it has also created a few new problems I was hoping to get some help with.
1) MMS has dissapeared from the messaging menu. I can't send, receive as it's just not there anymore!
2) Wifi connects to my network, assigns an IP but when I open IE (or any other browser), the browser closes immediately. GPRS works fine.
device data :
WM 6.5 CE OS 5.2.21139
wm6.5pro_QVGA HT4.20
ROM DATE 01/01/09
Radio version 1.06.00
Protocol 1337.38
extrom : black kernel
welcome to the forum!
1. mms is not a feature, that is built into the os by standard, it is an add-on application called arcsoft mms, that enables the account in messaging and gives you back the possibility to send, receive and set the mms again. you can find it in the iolite stuff thread, and since you are new, here's the link: -=the link=-
you will find the download link listed under 01.10.2008
2. that is odd!
-would the internet explorer stay open, when you have no data connection at all?
then you could enable the wi-fi afterwards.
-alternatively, do you get a real ip, when connecting to your wi-fi?
a real ip would be something like 192.168.x.x or 10.0.x.x in contrast to 169.254.x.x, which means, the devices uses dhcp and demands an ip from your access point, but is not assigned one, either because there is no dhcp server or 802.1x authentication failed or there is a MAC filter or the network is 54Mbit only, wpa2 or wpa-aes.
that would mean, that you have a corrupt wireless connection and no data traffic would work anyways. in that case make sure, your router is set up right, that a device that can only handle up to wlan-b, wpa-psk could access it and try a static ip in your network.
still i think it is strange, since under no circumstances the IE should crash, with or without a conection. maybe you want to try another IE version or an entirely different rom, if you can's fix that.
with best regards,
Chef_Tony
Wow thanks for the quick response.
I wasn't aware MMS isn't a standard feature. I'll look into that asap! Thanks! I feel educated.
As for the WIFI not working, I think it's something to do with the Sun Dream rom i'm using. I had read some of the 100+ pages (ugh!) and realised I was sposed to install IE8 after the ROM. This seems to have fixed whatever was wrong. Seems weird to me!
ok. maybe that is why that issue is so weird. since you are using wm6.5 i was assuming you also used the new internet explorer. but also, you wrote "(or any other browser)" in your first post and since not all the browsers are based on IE (some are) i thought, if you had the same issue there, it couldn't be related to IE but must be something with the conection itself.
Hi guys,
as said, i try to use my TP2 as a router, via my T-mo connection. I have an unlimited dataplan, and flashed the EngeryROM from Warhawk i guess.
Here is my Problem:
I can't access certain sites while using my TP as a router, and what annoys me the most is, that i cant run icq or steam on my laptop, using the TP...
Altough, icq runs on my TP.
Is this a port problem, or is it because T-mo blocks it?
Or any other idea?
Any help would be appreciated
I can't imagine that they'd block it. I'm not entirely up to speed on using the phone as a router, is it possible that the ports are blocked? Does the phone have an interface you can connect to similar to that of a traditional router? (IE tether your phone to your computer, once connected run an ipconfig and then type the address of the default gateway into your browser and see if there's an interface?) I might be way off base with that, though.
As an aside - I'm not sure what T-mobile's deal is with "unlimited" data plans. If it's anything like AT&T then once you cross that 5GB line you'll probably be on watch (from what I've gathered online), so you might want to look into that if it is your intention to pull a lot of data downstream from the likes of steam.
not familiar with t-mobile's data connection/setup but maybe its a proxy issue? try disabling the proxy if there is one and see if that helps.
I am using Energy Rom on my Tilt2 but I am on ATT
I had exactly the same issue.
Basically I had to disable proxy (which is a trick to get it to stick)
and switch to a different APN
I know it may not help but the default AT&T apn is wap.cingular
I use isp.cingular which supports direct connection without a proxy.
I am not sure how TMO does it's connections, but this may point you in the correct direction.
I guess its the proxy, cause i definitely know, that it's not volume limited.
Can anyone link me a tutorial or describe me how i can change that proxy or whatever, cause i'm really a noob when it comes to this...
The TP2 is my first WinMo device, so i ain't that experienced yet...
If you start WiFi Router, is there a choice for the internet connection in the lower area? I remember that I had several preconfiguratet connections on my MDA V when I got it from T-mobile. Maybe you can choose another connection there and it works. Did EnergyROM automatically set up your connections after flashing? Maybe you try these settings:
Name (Profilname): T-Mobile Internet
APN (Zugangspunkt): internet.t-d1.de
Benutzername: internet
Password: t-d1
DNS-Adresse: 193.254.160.001
IP- / Proxy- / Gateway-Port: 9201
Verbindungssicherheit: aus
GPRS-Ablaufzeit 2 Minuten
hey, tried out your settings, they seem to work, but i still cant connect with steam and icq -.-
i can only select the t-mobile internet connection in the wifi-router.
aaaaand i cant find the field where to enter this gateway port stuff you wrote.
Hope this links hel you:
http://forum.xda-developers.com/showthread.php?t=533664
http://forum.xda-developers.com/showthread.php?t=407563
And don´t forget to vote for Rhodium!
Nope, still not working. These tuts just show how to establish a connection, but i already got one. The problem is, that i can only access the internet via browser
No steam, icq, skype or else, which is pretty annoying, cause i don't want to pay an extra 25 euros for a surf stick by tmo...