Develop Bugs

Imate Kjam Will not boot

Hi all i am new to all this i tried to load a newer rom on my Imate it had an error and froze did a reset and now it only comes to the 3 colour boot screen i have tried a hard reset but no luck and have downloaded the offical rom again i can get into the bootloader screen by pressing camera button and on and connect with the usb the thing is how do I load the rom the Program"RUU program" says u must have a active sync connection and it will not work in the bootloader it says usb in the left conner but active sync will not work is there any other program that doesnt use active sync to load the rom to my phone i have been reading the forum and seen similar problems all with the reply load wizardlove cant find the it all the links are broken or doesnt excest I need to get my phone running asap and if i send it in it will only be returned inn 6weeks they say I am from south africa and the guys here can be a lot of help coz the know nothing so if anybody can help me please it would be great thanks

Which is your device a G3 or G4 ? post the IPL/SPL...? of the phone to determine the version. As far as it gets to bootloaders (tricolor screen) you are safe,its just a bad flash,nothing to worry,you'll soon have it working fine.
Which rom were you trying to upgrade to ? and what exactly were you doing.First, is your phone SIM/CID unlocked,if you were trying to upgrade to a latest wm6 rom,its essential to have the phone CID unlocked
Secondly,while in bootloaders, Activesync doesn't work,you got to have a working OS on the phone to sync with activesync,but when in bootloaders and usb appears in the bottom of the screen,you can flash the rom.
Cheers!

K Jam hangs at blue screen
Hi to all,
I have a K jam more then 1 years old. Now It is giving some probem. There is no display but only light in the screen but I make call and recieve calls!.
First time when problem arised. I pressed 3 battons(2 left side and 1 up side)the screen will became perfect and when I remove the battery & reinserted, the problem arised again. When I asked some 2 to 3 mobile service mens, thay told that there is a problem with OS (By reinstalling the OS it will be repaired). I think probem is with the strip connect motherboard to the LCD, that could be cuted but service mens told no, it is problem with OS.
Where I can get the OS, WM5 is preinstalled in it.
Still it did not open the mobile. Please help me
Many Thanks for all
Srikanth.K

hellol i m facing the same problem when i start my imate k jam it does nt boot to windows n stopd on three color screen wht to do now help me plz to sort out

I feel your Pain! im in the same boat the three colour screen! all my Imate only gives
me IPL 2.16.0001 an SPL 2.16.0001 not even an OS

i downloaded wm6 from here and i followed some step of senior member of these site.now i have a problem.when i upgraded my mobile restart after booting and again restart so i am in serious problem.what can i do now.any help.
my imate k-jam ipl 1.01 and spl is 1.06
please help me

Problem with backlight button!

Hi all, I have a problem with my MDA Pro, my phone usually use WM6 OS but when I come back the T-Mobile WM5 Original ROM, the backlight button can not be used, click and nothing happen. I hope someone will help me to sovle this problem. Thanks a lot!

I think ,maybe you should change another ROM on you MDA PRO,this problem was happend in my Universal,at last,the only way is use another ROM.
By the way,you can try to:start->setting>button , to set you backlight button.
Good luck to you!

Mine's an spv m5000 (UK-Orange). When I got the phone (2nd hand) it had the problem you described, although I knew it worked as it would get me into bootloader mode. Strangely, flashing Ranju's 6.1 made it work again.

Thanks for everybody! I've had a solution to solve this problem, I downloaded a program: "Ivan Light Bulb 2" and after install it into my device, the backlight button works again. Great!

p3300 wm6 turns off by itself

hey all,
i run into a problem today, my p3300 flashed with wm6 original from t-mobile netherlands keeps closing by itself. sometimes i see the screen dimming out and stay in a dark blue color, then i have to reset it to make it work,.
Sometimes it works for a bit longer then it shuts down again, and to power it on again i have to take off the battery.
I tryed hard-reset, no success. ima flash it again now and see if it helps.
If anyone knows a solution please

update: tryed reflashing with the same rom, didnt fix the problem. trying now with the english version (my own was dutch)

Did your problem start when you flashed a new rom? I had the same without doing nothing, Artemis was only 6 months old...I returned it back and they changed the mobo. Hope sincerely that this won't happen to you

hello, i had probably same problem:
http://forum.xda-developers.com/showthread.php?t=397924

Problem with Artemis Arte 100

Hi i am new in this forum but really old on the bussines, well the problem with my phone is that seems to be bricked, sometimes turn on hangs on operator logo and put black screen sometimes can get on boot mode some not, its an strange problem, already tried to flash with micro SD but no luck, i get the phone is this state to repair.
This is what i get when i put phone on boot mode:
IPL: 1.12.0001
SPL:1.12.0000
The phone is from the operator TIM Italy i will really appreciate if u help me to solve this insue.
Br,
Tito Millo

Standard ROM or Cooked One? Have you Used USPL before flashing?
D'rath
PS: I buyed a TIM Artemis for my girlfriend, I changed the ROM and no problems

Standar ROM yes i have tried to use USPL but no luck cuz phone doesnt turn on at all and i cant sync with active sync
Br,
Tito Milo

Touch Diamond doesn't boot

Hi everyone,
I've been trying to cook a WM6.5 in Portuguese (I used some files rom WM6.1PTG and I translated some others) with Visual Diamond Kitchen and in the cooking part all went well, I have the .ndh file generated and without errors.
Then I flash the Diamond and after the flashing is concluded the diamond makes itself a reboot and stops after the first boot screen with TouchDiamond and the red information about the versions.
I tried to do a hard restart, soft, remove and out again the batery without success.
Does anybody have the same problem?
I'll appreciate help.
Best Regards,
Armaia

Do you removed "FWUPDATE"?

pspeter said:
Do you removed "FWUPDATE"?
Click to expand...
Click to collapse
that FWUPDATE troubled me a lot!!!!

No, I didn't. Do you think that could be the problem? I,m going to try.
Thanks

Try to change the rom . Pull out the stylus , Press the reset button and hold the VOLUME DOWN and the right down button . After connect to pc

Hi,
I removed the FWDATE but the problem occurs in the same way.
AM

Armaia said:
Hi,
I removed the FWDATE but the problem occurs in the same way.
AM
Click to expand...
Click to collapse
Try to restore first your original shipped rom and then reflash your own rom.

Hi All,
I have the same problem, I flashed MightygroovyROM, after first boot, it stops, there is only "Touch Diamond" on the screen. I tried hard reset but doesnt work. Since activesync connection couldnt establish, I couldnt do anything.
Anyone know another technique to connect without activesync ? or is there any other way to go back old rom any flaeshing a new rom ?
Best regards
Kag
Armaia said:
Hi everyone,
I've been trying to cook a WM6.5 in Portuguese (I used some files rom WM6.1PTG and I translated some others) with Visual Diamond Kitchen and in the cooking part all went well, I have the .ndh file generated and without errors.
Then I flash the Diamond and after the flashing is concluded the diamond makes itself a reboot and stops after the first boot screen with TouchDiamond and the red information about the versions.
I tried to do a hard restart, soft, remove and out again the batery without success.
Does anybody have the same problem?
I'll appreciate help.
Best Regards,
Armaia
Click to expand...
Click to collapse