hey all,
i run into a problem today, my p3300 flashed with wm6 original from t-mobile netherlands keeps closing by itself. sometimes i see the screen dimming out and stay in a dark blue color, then i have to reset it to make it work,.
Sometimes it works for a bit longer then it shuts down again, and to power it on again i have to take off the battery.
I tryed hard-reset, no success. ima flash it again now and see if it helps.
If anyone knows a solution please
update: tryed reflashing with the same rom, didnt fix the problem. trying now with the english version (my own was dutch)
Did your problem start when you flashed a new rom? I had the same without doing nothing, Artemis was only 6 months old...I returned it back and they changed the mobo. Hope sincerely that this won't happen to you
hello, i had probably same problem:
http://forum.xda-developers.com/showthread.php?t=397924
Related
hi guys,
I have installed WM6 (T-mobile). First it worked fine! The phone keeps to hang up! the green light seems to flash, but i cant turn on the phone. ( It hanged up) , i noticed that everytime when i restart the phone ACTIVE SYNc is active in the taskbar!! ( i think thats the problem?) does any one encouter this problem? please help! i keep to be out of reach, because i dont notice it hanged up!
please help? any one any idea?
greetings
I have same problem, green led flash, but pda crash. WM6 HTC ROM
Try a hard reset.
This is what i tried:
* Flash WM6 again
* Downgraded Radio from 3.XX to 2.xx
* Hard resets!
Nothing helped!
Try another rom then the original HTC rom. Try the Artemis Touch 4.02 rom for example.
Do you also use batterystatus? If so, do you use the overclock feature? If you set it to high, your Artemis will also hang up (but on the other hand, this should be over after a hard reset).
Hey guys, I've updated to wm6 and sometimes after my p3300 started to either black out or get into a irresponsive mode where the screen is just lightly on. No buttons replies! Once its happens the only solution is to do a soft reset and then pass to phase 2, try to restart it. That bad boy gets stuck directly at the loading process and its maybe - with luck- that it will go through the os loading after 10 tries and soft resets. The phone can work then from five minutes to ten hours and will get stuck again. What is Happening???!!! Also I don't think its the battery cause it does the same thing even with full battery. Last detail, I just passed the warranty limit and its too late to send it back. What can I do??
Did you updated with the official Rom?
Try to flash it again.
Or just try it out a cooked WM6.1 ROM. I recomend Artemis touch Vanilla 4.02.
Cheers
You tried a hard-reset?
babar_almighty said:
Hey guys, I've updated to wm6 and sometimes after my p3300 started to either black out or get into a irresponsive mode where the screen is just lightly on. No buttons replies! Once its happens the only solution is to do a soft reset and then pass to phase 2, try to restart it. That bad boy gets stuck directly at the loading process and its maybe - with luck- that it will go through the os loading after 10 tries and soft resets. The phone can work then from five minutes to ten hours and will get stuck again. What is Happening???!!! Also I don't think its the battery cause it does the same thing even with full battery. Last detail, I just passed the warranty limit and its too late to send it back. What can I do??
Click to expand...
Click to collapse
did u run a uspl first?
jahrami said:
did u run a uspl first?
Click to expand...
Click to collapse
If he upgraded it, then he didn't need it or it was the original WM6 ROM.
The problem was after upgrade!
Flash it again or do a hard reset!
Cheers
Thanks for the help. Yeah I installed the touch Vanilla 4.02 cooked WM6.1 ROM. And I believe the uspl was in the file. As far as I remember I ran it but had no feedback whether it worked or no...
Would a hard reset get the bad boy back to wm5 or reboot with wm6.1?
I *should* reset/default to factory settings for whatever ROM was last successfully flashed to the device. You will lose any installed programs/data so so a PIM backup/ActiveSync before hand if required.
Hi everyone.
I have a big issue with my phone. I decided to upgrade the rom by an official one (french HTC rom). I use the unsigned hard SPL and flash it. Since that, my screen is vibrating. I don't know what is the probleme (maybe the phone was too hot during flash and something burn inside ?).
I tried a hard reset => nothing best.
I'm a little big afraid :-( Anyone got an idea ?
Thanks a lot.
I think this is normal my Diamond vibrate on every Startup and when I inital an Call.
Ghostrider
No actually it's not the phone's vibration. It's the image on the screen witch is "flashing" and vibrating.
After a sleeping time, the vibrations are less visible.
If the image on the screen becomes "fuzzy" (like TV interference), it almost sounds like faulty screen some people were experiencing. I doubt it have to do something with your flashing, just happened coincidentially at same time.
nael33 said:
Hi everyone.
I have a big issue with my phone. I decided to upgrade the rom by an official one (french HTC rom). I use the unsigned hard SPL and flash it. Since that, my screen is vibrating. I don't know what is the probleme (maybe the phone was too hot during flash and something burn inside ?).
I tried a hard reset => nothing best.
I'm a little big afraid :-( Anyone got an idea ?
Thanks a lot.
Click to expand...
Click to collapse
Hi, i did have the same problem using TLR (cant remember what version).
What i did was to flash it again with another ROM (bElite v0.54) and my picture was fine after that
Ive got that problem when I flash ANY rom with HARD-SPL running so what I do is flash back to a stock version of spl (1.37) from here http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39
So in this order......
1 - Flash HARD SPL
2 - Flash rom
3 - Flash Stock SPL
Problem solved
nael33 said:
I'm a little big afraid :-( Anyone got an idea ?
Thanks a lot.
Click to expand...
Click to collapse
Try what ratcom said. If it still flashes with standard ROM, I would advise you to make everything original again (ie original ROM & SPL) then send back to HTC for repair.
Hi. After my issue, I decided to downgrade the phone and, when I put the official SPL, it was working. 5 minutes later, I read ratcom's post that confirm the problem and the solution. So, this morning, after charging the battery, I used unsigned SSPL, put the HTC rom, get one more time the sreen issue, and reflash the SPL by an original one just like ratcom said. And ... it's working. No more sreen vibration ! And a new and nice HTC rom !
So, thanks for your help !
Hi all, I have a problem with my MDA Pro, my phone usually use WM6 OS but when I come back the T-Mobile WM5 Original ROM, the backlight button can not be used, click and nothing happen. I hope someone will help me to sovle this problem. Thanks a lot!
I think ,maybe you should change another ROM on you MDA PRO,this problem was happend in my Universal,at last,the only way is use another ROM.
By the way,you can try to:start->setting>button , to set you backlight button.
Good luck to you!
Mine's an spv m5000 (UK-Orange). When I got the phone (2nd hand) it had the problem you described, although I knew it worked as it would get me into bootloader mode. Strangely, flashing Ranju's 6.1 made it work again.
Thanks for everybody! I've had a solution to solve this problem, I downloaded a program: "Ivan Light Bulb 2" and after install it into my device, the backlight button works again. Great!
hey, I'm only 1.40 Olinex unsigned;
when i first boot up I have this:
R 52.2.25.12h
G 1.00.25.05
D 1.93.0.0.0
My phone shuts down by itself, after i see the HTC logo and i hear the shut down sound.
why is that happening, is it software or hardware?
PS: RUU_Diamond_HTC_Europe_1.93.401.2_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
I am flashing with this ROM, and with some other ROMs it is not even booting up
try this mate
try running mtty then reflash your rom, mtty formats your nand chip and repairs any erroes read THE DEFFINATIVE MTTY THREAD all explained there got to be worth a try hope this helps
trying this now will report on results thank you mate
still having problems, now phone wont boot up at all
i think i can make it boot
(I got USB error after i pressed <- and Vol Down to flash ROM )
is there a problem in my SPL? is my phone bricked?
i can boot into WinMo after i have left the phone for a few hours
but now 5-20 minutes after booting (depending on each time), suddenly i see the HTC logo, and here the shut down beep
any help ?
could it be a bad battery issue?
because when i turn it on i see an exclamation mark next to the battery icon in the bar on top
any suggestions? plzplzplz !!
MTTY Thread
Reflash your phone doing EXACTLY what it says in that thread and you should be good to go.
mzaouar said:
could it be a bad battery issue?
because when i turn it on i see an exclamation mark next to the battery icon in the bar on top
any suggestions? plzplzplz !!
Click to expand...
Click to collapse
Buy another battery, It looks like battery problem.
Good luck
now the battery looks like it's working fine, i've flashed a new radio ROM, but it's getting turned off again :S
should i upgrade to the 1.93 HSPL? because i have a 1.93 ROM
can the problem be from the radio?
Same thing here,
Been flashing the diamond to the bone.
After flashing the (22 jul) verion of the NRG warhawk rom
I have been experiencing some glitches.
As it was my first step from wm 6.1 to 6.5 and I dont want to go back.
The errors ive experienced are not related to rom issues.
Because i got em almost with every rom.
- random restarts
- loss of contacts
- no responding of the device
And ive been reading about the MTTY sollution I go and try that one.
Enonoid, so you didnt find a soltuion to your problem?
and if not, what do you suspect the culprit is?
Been flashing the diamond to the bone.
After flashing the (22 jul) verion of the NRG warhawk rom
I have been experiencing some glitches.
As it was my first step from wm 6.1 to 6.5 and I dont want to go back.
The errors ive experienced are not related to rom issues.
Because i got em almost with every rom.
- random restarts
- loss of contacts
- no responding of the device
And ive been reading about the MTTY sollution I go and try that one.
Reply With Quote
the problem isn't rom related running MTTY formats the chip where the rom resides its like reloading windows on your computer when you know there are bad sectors on your hard drive. it just wont happen follow the THE DEFINATIVE MTTY THREAD and honestly all should be fine it sounds quite tricky at first, but I use mtty everytime i reflash now saves whishing you'd done it once you've reinstalled everything and believe me its so easy if you just follow the guide.