hi guys,
I have installed WM6 (T-mobile). First it worked fine! The phone keeps to hang up! the green light seems to flash, but i cant turn on the phone. ( It hanged up) , i noticed that everytime when i restart the phone ACTIVE SYNc is active in the taskbar!! ( i think thats the problem?) does any one encouter this problem? please help! i keep to be out of reach, because i dont notice it hanged up!
please help? any one any idea?
greetings
I have same problem, green led flash, but pda crash. WM6 HTC ROM
Try a hard reset.
This is what i tried:
* Flash WM6 again
* Downgraded Radio from 3.XX to 2.xx
* Hard resets!
Nothing helped!
Try another rom then the original HTC rom. Try the Artemis Touch 4.02 rom for example.
Do you also use batterystatus? If so, do you use the overclock feature? If you set it to high, your Artemis will also hang up (but on the other hand, this should be over after a hard reset).
Related
I switched on my phone today, and it loaded the o2 screen, and now is permanently stuck on the Black and Blue screen.
I using Tom's B&B 4.0 touch-flo rom.
Please help!
try a hard reset, something similar happened to me when i was using a different rom and a hard reset fixed it, hope that helps.
Hard reset is when you push call and end buttons together and insert the stylus?
Didnt work either.
hmm.. maybe reinstall the rom then? Did you install any programs on the phone??
It's not detecting the fone, hence I cant even reinstall the ROM.
Is there any way 2 recover from this? Or did I just loose 700 bucks!?
Even problem whereas I had any concern with this version v4.0…
I flashé my artemis 4 or 5 times, it went super… (I would have of the Juste to make hardware reset…).
Since my 2 last flash, that blocks on the page during more 5min…
Flash after flash, always similar
http://forum.xda-developers.com/showthread.php?p=1445305&posted=1#post1445305
So wait, were you able to fix it?
As of right now my fone is sitting like a brick on my table.
Me I wait, of the blow I do not make more software reset…
I am obliged to await more 5min before being able to type my code PIN.
I do not include/understand, that had ever done it to me before this last flash.
I have remakes a flash, always similar, even while passing by a ROM Orange, as soon as I pass by again in V4.0, that does it to me!!!!
Its been over 5 mins for me and its still stuck on the B&B screen. HELP!
Make a hard reset and change the ROM....v3.7 for exemple...
Yea, I tried reflashing it, but the Rom update utility doesnt detect the fone at all.
Look this :
http://www.forummobiles.com/index.php?showtopic=139079
It's a french but it's easy with photo !
I read it, but because it never passes the boot screen, it never detects it hence it doesnt show up in the device manager.
What 2 do!?
Try hard reset again. What did you mean when you said it doesn't work? It didn't do anything? It tried re-installing and failed? What happened?
You don't need the ROM update utility to do a hard reset.
B&B 4.0 Getting stuck on the windows loader, is a know problem. TRy a hard reset to fix it.
Hard reset: Stylus in the hole on the side, and press the two " - " buttons between the red and green button.
This should fix the problem. Now you can flash another rom into the P3300. I'm, running 3.4 without any problem. I updated it with the HTC Tabs from Tom wich used in B&B 4.0.
The problem is that V4.0 functioned very well on my first flash…
while reinstalling the plug in HTC Home + the file SDK, that is better!!
Normal :
http://forum.xda-developers.com/attachment.php?attachmentid=47324&d=1187262723
Color :
http://forum.xda-developers.com/attachment.php?attachmentid=47329&d=1187264616
File SDK :
http://forum.xda-developers.com/attachment.php?attachmentid=47339&d=1187272601
I may come back, for now my Artemis is sitting, bricked, on my table and I've tried everything.
Someone please tell me what I'm doing wrong?
You need to flash via bootloader - hold record button down and soft reset - you now have multicolored screen - connect via usb and flash - you dont need activesync this way.
Hey guys, I've updated to wm6 and sometimes after my p3300 started to either black out or get into a irresponsive mode where the screen is just lightly on. No buttons replies! Once its happens the only solution is to do a soft reset and then pass to phase 2, try to restart it. That bad boy gets stuck directly at the loading process and its maybe - with luck- that it will go through the os loading after 10 tries and soft resets. The phone can work then from five minutes to ten hours and will get stuck again. What is Happening???!!! Also I don't think its the battery cause it does the same thing even with full battery. Last detail, I just passed the warranty limit and its too late to send it back. What can I do??
Did you updated with the official Rom?
Try to flash it again.
Or just try it out a cooked WM6.1 ROM. I recomend Artemis touch Vanilla 4.02.
Cheers
You tried a hard-reset?
babar_almighty said:
Hey guys, I've updated to wm6 and sometimes after my p3300 started to either black out or get into a irresponsive mode where the screen is just lightly on. No buttons replies! Once its happens the only solution is to do a soft reset and then pass to phase 2, try to restart it. That bad boy gets stuck directly at the loading process and its maybe - with luck- that it will go through the os loading after 10 tries and soft resets. The phone can work then from five minutes to ten hours and will get stuck again. What is Happening???!!! Also I don't think its the battery cause it does the same thing even with full battery. Last detail, I just passed the warranty limit and its too late to send it back. What can I do??
Click to expand...
Click to collapse
did u run a uspl first?
jahrami said:
did u run a uspl first?
Click to expand...
Click to collapse
If he upgraded it, then he didn't need it or it was the original WM6 ROM.
The problem was after upgrade!
Flash it again or do a hard reset!
Cheers
Thanks for the help. Yeah I installed the touch Vanilla 4.02 cooked WM6.1 ROM. And I believe the uspl was in the file. As far as I remember I ran it but had no feedback whether it worked or no...
Would a hard reset get the bad boy back to wm5 or reboot with wm6.1?
I *should* reset/default to factory settings for whatever ROM was last successfully flashed to the device. You will lose any installed programs/data so so a PIM backup/ActiveSync before hand if required.
Hi everyone.
I have a big issue with my phone. I decided to upgrade the rom by an official one (french HTC rom). I use the unsigned hard SPL and flash it. Since that, my screen is vibrating. I don't know what is the probleme (maybe the phone was too hot during flash and something burn inside ?).
I tried a hard reset => nothing best.
I'm a little big afraid :-( Anyone got an idea ?
Thanks a lot.
I think this is normal my Diamond vibrate on every Startup and when I inital an Call.
Ghostrider
No actually it's not the phone's vibration. It's the image on the screen witch is "flashing" and vibrating.
After a sleeping time, the vibrations are less visible.
If the image on the screen becomes "fuzzy" (like TV interference), it almost sounds like faulty screen some people were experiencing. I doubt it have to do something with your flashing, just happened coincidentially at same time.
nael33 said:
Hi everyone.
I have a big issue with my phone. I decided to upgrade the rom by an official one (french HTC rom). I use the unsigned hard SPL and flash it. Since that, my screen is vibrating. I don't know what is the probleme (maybe the phone was too hot during flash and something burn inside ?).
I tried a hard reset => nothing best.
I'm a little big afraid :-( Anyone got an idea ?
Thanks a lot.
Click to expand...
Click to collapse
Hi, i did have the same problem using TLR (cant remember what version).
What i did was to flash it again with another ROM (bElite v0.54) and my picture was fine after that
Ive got that problem when I flash ANY rom with HARD-SPL running so what I do is flash back to a stock version of spl (1.37) from here http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39
So in this order......
1 - Flash HARD SPL
2 - Flash rom
3 - Flash Stock SPL
Problem solved
nael33 said:
I'm a little big afraid :-( Anyone got an idea ?
Thanks a lot.
Click to expand...
Click to collapse
Try what ratcom said. If it still flashes with standard ROM, I would advise you to make everything original again (ie original ROM & SPL) then send back to HTC for repair.
Hi. After my issue, I decided to downgrade the phone and, when I put the official SPL, it was working. 5 minutes later, I read ratcom's post that confirm the problem and the solution. So, this morning, after charging the battery, I used unsigned SSPL, put the HTC rom, get one more time the sreen issue, and reflash the SPL by an original one just like ratcom said. And ... it's working. No more sreen vibration ! And a new and nice HTC rom !
So, thanks for your help !
hey all,
i run into a problem today, my p3300 flashed with wm6 original from t-mobile netherlands keeps closing by itself. sometimes i see the screen dimming out and stay in a dark blue color, then i have to reset it to make it work,.
Sometimes it works for a bit longer then it shuts down again, and to power it on again i have to take off the battery.
I tryed hard-reset, no success. ima flash it again now and see if it helps.
If anyone knows a solution please
update: tryed reflashing with the same rom, didnt fix the problem. trying now with the english version (my own was dutch)
Did your problem start when you flashed a new rom? I had the same without doing nothing, Artemis was only 6 months old...I returned it back and they changed the mobo. Hope sincerely that this won't happen to you
hello, i had probably same problem:
http://forum.xda-developers.com/showthread.php?t=397924
Guys I need your help..
3 days ago I upgrade my ROM from VIC ROM to DIB ROM but now my diamond goes weird...
If I soft reset the device it became a hard reset..Or if my diamond more than 7-8 hours standby it suddenly "hang" and if I soft reset then became a hard reset again...I think it's because a new ROM then I change to my old ROM (that before it's normal), but I didn't see any different, my diamond keep hard reset and hang..
Any one have suggestion or solution?What happening to my diamond?
Oh I almost forget same times if it hang and I soft reset the device it appears message like "Your device can't boot because it didn't turn off correctly or you install untrusted application..bla...bla.."
PLEASE HELP ME....
kumis_merah said:
Guys I need your help..
3 days ago I upgrade my ROM from VIC ROM to DIB ROM but now my diamond goes weird...
If I soft reset the device it became a hard reset..Or if my diamond more than 7-8 hours standby it suddenly "hang" and if I soft reset then became a hard reset again...I think it's because a new ROM then I change to my old ROM (that before it's normal), but I didn't see any different, my diamond keep hard reset and hang..
Any one have suggestion or solution?What happening to my diamond?
Oh I almost forget same times if it hang and I soft reset the device it appears message like "Your device can't boot because it didn't turn off correctly or you install untrusted application..bla...bla.."
PLEASE HELP ME....
Click to expand...
Click to collapse
Problem mimics this thread ......http://forum.xda-developers.com/showthread.php?t=490182.....might be caused by a bloated ROM
I had the same problem and for me this way works:
I flashed a new HardSPL (1.93 by Olinex)
Then made a Hard-Reset.
After the new HardSPL i installed the original 2.03 Rom from HTC
and made also a Hard-Reset.
Now my device works without any problems.
So I think, after my last step it is possible to install any cooked Rom,
but at the moment i don't know which one causes the crashes and it seems that a few others here have also problems so i will wait and see what happens in the next time...
(Im sorry for the English but I hope you can understand what I wants to say!)