Problem with Artemis Arte 100 - P3300, MDA Compact III General

Hi i am new in this forum but really old on the bussines, well the problem with my phone is that seems to be bricked, sometimes turn on hangs on operator logo and put black screen sometimes can get on boot mode some not, its an strange problem, already tried to flash with micro SD but no luck, i get the phone is this state to repair.
This is what i get when i put phone on boot mode:
IPL: 1.12.0001
SPL:1.12.0000
The phone is from the operator TIM Italy i will really appreciate if u help me to solve this insue.
Br,
Tito Millo

Standard ROM or Cooked One? Have you Used USPL before flashing?
D'rath
PS: I buyed a TIM Artemis for my girlfriend, I changed the ROM and no problems

Standar ROM yes i have tried to use USPL but no luck cuz phone doesnt turn on at all and i cant sync with active sync
Br,
Tito Milo

Related

Unable to boot up after upgrade ROM to WM6

I follow instruction in http://forum.xda-developers.com/showthread.php?t=313486 but after hardreset.
My p800w is stuck in T-Mobile logo and version number. It can't continue booting up to windows mobile.
Question: How to flash ROM without ActiveSync?
How to recovery my Artemis?
Welcome any advice,
Thanks in advance.
Yea me to, mine is now a brick after that upgrade? No active sync connection possible and all I get now is the blue O2 start screen after the hard reset with the red writing and numbers in the top left hand corner..
Phone is an UK XDA Orbit
IPL 1.25.0001
SPL 1.11.0000
GSM 02.67.90
OS 3.4.0.0
HELP!!!!!!!
yeah, I had the same problem and have created a thread for it already. unfortunately I got no useful replies, and it seems that I am stuck waiting for an official o2 ROM so that I can recover my Orbit.
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
motomob said:
It seems there is a way to un brick our phones I just need to get my phone bootted into bootlader mode which no one seems to say how to do??
Can anyone help how I can boot my Orbit , like what combo of keys I need to press to boot it into bootloader mode then XP will see it at a driver level apparently Active Sync still won;t but I will be able to run some German ROM update with the ROM file replaced with the other ones and it may come back to life..
Help how can I boot my phoen in bootloader mode???
Click to expand...
Click to collapse
I read in here that you hold the voice button and soft reset.
Decaf said:
I read in here that you hold the voice button and soft reset.
Click to expand...
Click to collapse
Correct and use mtty
Already see in the forum ....
Thanks guys and apologies for the spelling..I ran the Artemis_USPL before I tried upgrading to WM6 and again have been able to run it after with my new brick now with the phone in bootloader mode but still when I try and run the german ROM update a) it will only work with the german file which freezes @ 3%? This seems to be a known problem reading around and b )when I replace it with the smaller ROM file, 54MB the german one is 66MB, I originally tried to use it doesn't read the ROM file or the update utility doesn't want to read it. I reckon I might be able to get it back if I can get one of the ROM update utilities to read a good ROm file and send it to the phone.
I can;t find this MTTY program to sniff the USB port and return the code of if the USPL util wokred as I think that could be key to all of this.
Can anyone post a quick how to here for
1) install MTTY from somewhere
2) what command to run agaist the phoen to see if the USPL util worked and what values I should be looking for
3) another WM6 ROM version (that the update utils can read) download location I can download from to try and send to the phone using the German update util
Not asking for much am I but I desperately need my phone back WM5 or 6 in the next day or so so really can't send it off.
Thanks
Error message I recive at the 3% stage when using the German ROM and english update util.
use the file attach and read that :
http://forum.xda-developers.com/showthread.php?t=285112
Thanks but I'm not that cleud up on what commands I'm meant to be sending. It works in Bootloader mode I ge a response from the phone by send it a command. But even if I get a response telling me what the CID status is its not much help as I think ti shoudl have tekane BEBEs ROM by now as I've got the german ROMUpdateUtility sending that 54,272KB file to the phone but it stops after 3%. What are my options?
motomob said:
But even if I get a response telling me what the CID status is its not much help as I think
Click to expand...
Click to collapse
That's right. On older models MTTY was quite useful, but not on the Artemis. You cannot use it to read the CID status anyway. If you are not sure about the status, run the USPL tool, just to make sure.
I've already re run the USPL ROMUpdateUtility and it completes 100% okay in bootloader mode. But after I hard reset and then try and flash the WM6 BEBE ROM or any ROM German etc back onto it it either fails with the error code I posted up earlier or gets to 3% and fails.
What are my options at this stage? Does anyone have a link to another ROM I can try like the original WM5 O2 ROM or any other WM6 ROm that might work. I'm willing to give them all a try as it's just a useless phone right now and I haven;t sent it off as 1) I need it before the weekend and 2) As I can flash some ROMs with the USPL and others have done this no problem I really feel there must be a solution as I can still falsh the phone.
What can I say RTFM... I did it all right and I didn't have a brick, I missed out one small detail... loading on the ROM with the extended ROM. All now running and it does seem a little faster than WM5.
Thank you to all those that tried to help out. To the others that are still having probs.. Don't try and run the update in the middle of a busy day in the office whilst trying to manage 100 other things meaning you are probably missing out a line like me...
One question though how do I get back my O2 power and storage meters on the today screen back as I liked them and the WiFi seems to have a bug where when it is enabled and you click on the WiFi symbol up the top it only allows you to switch it on, when it is already on.. so you have to open up the COMM manager to switch it off.
So how did you fix it exactly? I have read this thread thoroughly and can't find out what you did!
ERROR[206] occurs while trying to update ROM to WM6
While tring to update ROM to WM6 on O2 XDA Orbit i encounter ERROR[206].
I wanted to attach the screen shot but dont know how to do that, but anyway what i am doing is i attached my pda to my pc via activesync using supplied usb cord. Everything goes well till i reach a screen where it says "You are now ready to update your ROM image...." and once i click next a progress bar apperas and my pda shuts and activesync exit's automatically and my pda tries to restart with RBG band and some text:RUU, IPL 1.25.0001, SPL 1.25.0000 and USB. And thats it after few seconds or a min i get the ERROR[206] and my pda hangs.
I dont know why Activesysn shutsdown ???
Just an additional in i want to tell that without installing activesync i am not able to connect/pair my pda with my pc. So do i need to install the drivers and then try or it doen't matter cause once i install Active sync i can connect the device.
Please help me with this....
Thanks
unable to load bootloader!!!!!!!!!!!!
HELP!!!!!!!!
I have HTC3300, tried to update rom, now its bricked. I tried to start bootloader by pressing the voicebutton and softreset but loads in t-mobile screen and hangs, im unable to start the bootloader.
Is this end of story or are there any other options to get the bootloader to start????
please help
Bootloader
I had a problem with my phone loaded touch flow 4 and cid unlocking, everything was fine then after a while it froze at boot up.
I look put the battery and did a hard reset, put it into bootloadeder mode, reflashed with a t-mobile rom does not need to be cid unlocked to do that.
Once origonal rom was working, cid unlock again, flashed back to touchflow 4.0 - sorted
Where did you got an tmobile rom from can you tell me. Mine is also freezing on booting almost once every day or so after I've upgraded to 4.0

Imate Kjam Will not boot

Hi all i am new to all this i tried to load a newer rom on my Imate it had an error and froze did a reset and now it only comes to the 3 colour boot screen i have tried a hard reset but no luck and have downloaded the offical rom again i can get into the bootloader screen by pressing camera button and on and connect with the usb the thing is how do I load the rom the Program"RUU program" says u must have a active sync connection and it will not work in the bootloader it says usb in the left conner but active sync will not work is there any other program that doesnt use active sync to load the rom to my phone i have been reading the forum and seen similar problems all with the reply load wizardlove cant find the it all the links are broken or doesnt excest I need to get my phone running asap and if i send it in it will only be returned inn 6weeks they say I am from south africa and the guys here can be a lot of help coz the know nothing so if anybody can help me please it would be great thanks
Which is your device a G3 or G4 ? post the IPL/SPL...? of the phone to determine the version. As far as it gets to bootloaders (tricolor screen) you are safe,its just a bad flash,nothing to worry,you'll soon have it working fine.
Which rom were you trying to upgrade to ? and what exactly were you doing.First, is your phone SIM/CID unlocked,if you were trying to upgrade to a latest wm6 rom,its essential to have the phone CID unlocked
Secondly,while in bootloaders, Activesync doesn't work,you got to have a working OS on the phone to sync with activesync,but when in bootloaders and usb appears in the bottom of the screen,you can flash the rom.
Cheers!
K Jam hangs at blue screen
Hi to all,
I have a K jam more then 1 years old. Now It is giving some probem. There is no display but only light in the screen but I make call and recieve calls!.
First time when problem arised. I pressed 3 battons(2 left side and 1 up side)the screen will became perfect and when I remove the battery & reinserted, the problem arised again. When I asked some 2 to 3 mobile service mens, thay told that there is a problem with OS (By reinstalling the OS it will be repaired). I think probem is with the strip connect motherboard to the LCD, that could be cuted but service mens told no, it is problem with OS.
Where I can get the OS, WM5 is preinstalled in it.
Still it did not open the mobile. Please help me
Many Thanks for all
Srikanth.K
hellol i m facing the same problem when i start my imate k jam it does nt boot to windows n stopd on three color screen wht to do now help me plz to sort out
I feel your Pain! im in the same boat the three colour screen! all my Imate only gives
me IPL 2.16.0001 an SPL 2.16.0001 not even an OS
i downloaded wm6 from here and i followed some step of senior member of these site.now i have a problem.when i upgraded my mobile restart after booting and again restart so i am in serious problem.what can i do now.any help.
my imate k-jam ipl 1.01 and spl is 1.06
please help me

htc p3300 dead and no power

Today i tried to flash my PDA back to amazing artemis 1.0
beacuse i like it
but i had stuck in my computer I stoped flashing but my mobile is not working and not charging
it's not macking boot loade mode
please help me
sorry for my bad english
remove battery during several minutes and try again to enter in boot loader.
thank you brother ofter remove th battery for 10 minutes the mobile worked on boot loader
thanx bro
How to entering into the Boot Mode my P3300?
lefteris said:
How to entering into the Boot Mode my P3300?
Click to expand...
Click to collapse
You can find it in the Artemis Wiki, this is the page you'd have found - http://wiki.xda-developers.com/index.php?pagename=Artemis_Resets
lefteris said:
How to entering into the Boot Mode my P3300?
Click to expand...
Click to collapse
Hi bro, hold on the voice-dail button (record button), & hold the power button at the sametime. then wait several seconds, you'll get the multi-color screen.
now it's time to plugin the usb for upgrading or recovering.
I met the problem that it always failed when the progress was 3%. i downloaded several roms from internet. how could i know which rom is correct for my device(p800 in China). Besides, my device could just enter the boot mode, so it's impossible to unlock spl for it.
and The worst thing is that there are several hours(not minutes) between each time to power on it. It means i should wait 1 or 2 or 3 hours (who the hell know) to re-flash it after i was failed to flash previously.
is anybody had the same experience. that's really make me crazy.
THANKYOU MR Sanco60 THANKYOU VERY MUCH FOR YOUR IDEA OF SWITHCH ON IN BOOT THANKYOU MY DEAD MOBILE NOW SHINES
sanco60 said:
Hi bro, hold on the voice-dail button (record button), & hold the power button at the sametime. then wait several seconds, you'll get the multi-color screen.
now it's time to plugin the usb for upgrading or recovering.
I met the problem that it always failed when the progress was 3%. i downloaded several roms from internet. how could i know which rom is correct for my device(p800 in China). Besides, my device could just enter the boot mode, so it's impossible to unlock spl for it.
and The worst thing is that there are several hours(not minutes) between each time to power on it. It means i should wait 1 or 2 or 3 hours (who the hell know) to re-flash it after i was failed to flash previously.
is anybody had the same experience. that's really make me crazy.
Click to expand...
Click to collapse
Hi,
you've removed the microSD, right?
If yes, did you try with the original ROM for the P3300?
p800=p3300, but i'm not 100% sure...
bye,
Silvio
Hello Guys,
I have the same problem with my P3300.
The problem is that the phone do not start and I cant put in the cooked rom because I did not make the Uspl when it was still alive.
Is it possible to USPL the rom also if is not connected whit activesync?
Thanks beforehands!
fabio
[email protected] said:
Hello Guys,
I have the same problem with my P3300.
The problem is that the phone do not start and I cant put in the cooked rom because I did not make the Uspl when it was still alive.
Is it possible to USPL the rom also if is not connected whit activesync?
Thanks beforehands!
fabio
Click to expand...
Click to collapse
Hi
Original ROM? Didn't work?
O.T.: Are you Italian?
Bye,
Silvio
Ciao Silvio!
yes I'm Italian, thank you for the reply.
I had the original ROM, but now the phone is broken, if I try to switch it on the system go in crash in few seconds.
i tried to put in in bootloader mode (colored screen), but i can not load in ROM because the process crash when is at 3%, can I USPL the ROM from the sd card or when is off?
Thanks,
Fabio
[email protected] said:
Ciao Silvio!
yes I'm Italian, thank you for the reply.
I had the original ROM, but now the phone is broken, if I try to switch it on the system go in crash in few seconds.
i tried to put in in bootloader mode (colored screen), but i can not load in ROM because the process crash when is at 3%, can I USPL the ROM from the sd card or when is off?
Thanks,
Fabio
Click to expand...
Click to collapse
Are you sure that have you removed the SD card when you flash?
O.T.: me too, if you prefer to speak italian with me you can write in Italian in O.T. but you must wrote also in english
Bye Silvio
P.S. I don't speak English very well
Yes the Sd is off,
PS: Compared with mine your English is good
[email protected] said:
Yes the Sd is off,
PS: Compared with mine your English is good
Click to expand...
Click to collapse
ok, but you have the SPL blocked?
P.S. I don't think...
Yes unfortunately....
you can try to extract the nbh file from the executable of the original ROM and with SD Flash but I'm not sure ... I'm sorry, now I must run away, see you tomorrow
Bye,
Silvio
. I don't speak English bat understain
Compared with mine your English is good
Compared with mine your English is good
please help please!!!!!!!!!
my htc arte 100 is not enter a boot menu.tricolors screen and IPL1.13.0001,SPL1.1.13.0000
activesync is reconizet this device bat not seed to conectings.
firmware working 2% and ...error 294-invalid vender id
USPL charging 100% bat...error 270
johanis1982 said:
my htc arte 100 is not enter a boot menu.tricolors screen and IPL1.13.0001,SPL1.1.13.0000
activesync is reconizet this device bat not seed to conectings.
firmware working 2% and ...error 294-invalid vender id
USPL charging 100% bat...error 270
Click to expand...
Click to collapse
What ROM did you try to flash?
Bye,
Silvio

Phone bricked during flash of roms??

Hi all,
I have a huge problem and I hope you guys can help me. I tried to flash the orbit (german) artemis of my brother. First flashed the uspl and everything worked fine. At the end there came this penguin picture and the screen stayed black/blue. Then I flashed the rom (MossisROMV3.0GER Windows Mobile 6.5).
HOWEVER: Right then the battery of the laptop went down and the pc switched off. Unfortunately we couldnt plug it in, since we didnt have the cable with us. Now after pluging in the pc there were some connection error notices. Since I didnt know how to proceed I removed the battery of the artemis. I thought I should repeat everything from the beginning on. However the phone always got stuck at the blue o2 screen showing the data:
IPL 3.04.0001
SPL 3.04.0000
GSM 02.88.90
OS 3.13.0.0
Softreset and harrest doesnt make any difference. The phone always gets stuck here.
Is the phone bricked?? Why then does it start? Please help me out asap, since the phone is needed. What can I do?
Thanks in advance
brm
first you are NOT CID unlocked (SPL 3.04.0000)
so you can only flash german orbit ROM on the phone to revive it
1. get to bootloader (press and hold the record button and reset the phone using stylus)
you will get the tri colour screen
2. connect the phone via USB to PC (no need to look for activesync/WMDC connection in this case)
3. and run the RUU (official O2 german ROM for O2 Xda Orbit)
BTW i have official o2 UK ROM in my 4shared account
look for the link in my signature
you may try your luck on that
Hi,
thanks for the fast respond. I read the just before some where else and right now I am searching for the original german rom. However cant find it anywere.
Do you think the english one will work too?
best,
brm
sheennick123456 said:
BTW i have official o2 UK ROM in my 4shared account
look for the link in my signature
you may try your luck on that
Click to expand...
Click to collapse
very few chances of that ....
but you can have a go atleast
i might be having an german official ROM not sure though
if i have it i will upload it ASAP
Hi,
thanks sheennick123456. Really kind for your fast responses, Finally I found the original german rom and right now i am flashing it. Afterwards i am gonna flash a new rom and hopefully everything will wirk fine. But thanks again for your kind help.
best,
brm
LOL even i got 1
uploading it now as i type....
it might help someone .....
which rom
Hi again,
after installing a wm 6.5 ger rom i must say i dont like it at all. can you recommend me another one? i think one with htc touchflo would be great, but which one is it?
If i want to flash a new rom, do i first have to flash the original rom before proceeding?
best,
brm

HTC Touch Diamond : Cannot Start !! Help Please

hello this is my first post in this forum and I hope you accept me as friends on this section of HTC Touch Diamond
.. I have a HTC Touch Diamond P3700 ( new) and since yesterday he cannot be Started on .. and I tried several solutions (reset ....) but no result
Could you provide me a solution Please
My Greetings
Aziz
Nice use of font colors. Unfortunately the same cant be said for your phone. Whats your location and from which (country) did you buy your touch diamond from
Just be patient and listen ayyu3m to explain you and he will help you 100%.I have more worst problem than u have
sorry i was not here for yesterday
im from morocco
and the fone is from : SFR France original and made in taiwan
thanks a lot my friends
i wait your repley
regards​
newlead said:
sorry i was not here for yesterday
im from morocco
and the fone is from : SFR France original and made in taiwan
thanks a lot my friends
i wait your repley
regards​
Click to expand...
Click to collapse
Okay. So what exactly did you do or what exactly happened to your phone?
man did ya try to charge it? maybe the bettray is dead and can ya load the boot screen u know just press the down volume button and reset see if u can see the three colors screen if its then dont worry ... worst thing is just re-flash the rom PM me for extra help buddy
I have the same problem with my phone after i tried to update rom.
I flashed hardspl 1.40.OliNex and then Diamond_Radio_1.00.25.07 ...everything ok until i tried ruu_diamond_orange_ro_1.37.70.1_radio_signed_diamond_52.33a.25.17_1.00.25.08_ship.
Now it only shows an image with orange and
r: 1.12.25.19
g: 52.60.25.33U
d:1.93.00.00
and nothing else since yesterday... I can get it to bootloader tricolor screen but that's all cause no matter what i try to flash it stops randomly at X% and get error update. The only difference was Radio_1.12.25.19 that seemed to work. Hard reset doesn't work either cause i get the same start image with orange and that's all.
lexxa v said:
I have the same problem with my phone after i tried to update rom.
I flashed hardspl 1.40.OliNex and then Diamond_Radio_1.00.25.07 ...everything ok until i tried ruu_diamond_orange_ro_1.37.70.1_radio_signed_diamond_52.33a.25.17_1.00.25.08_ship.
Now it only shows an image with orange and
r: 1.12.25.19
g: 52.60.25.33U
d:1.93.00.00
and nothing else since yesterday... I can get it to bootloader tricolor screen but that's all cause no matter what i try to flash it stops randomly at X% and get error update. The only difference was Radio_1.12.25.19 that seemed to work. Hard reset doesn't work either cause i get the same start image with orange and that's all.
Click to expand...
Click to collapse
and pls tell me where you bought ur diamond from and if you know the stock rom which shud be in ur device.
even if u dont know the answer to 2nd question tell me where you bought ur phone and ur country
ayyu3m said:
and pls tell me where you bought ur diamond from and if you know the stock rom which shud be in ur device.
even if u dont know the answer to 2nd question tell me where you bought ur phone and ur country
Click to expand...
Click to collapse
I live in Roumania and bought the phone from someone and i don't know where did he get it from... but when i tried the official htc suport they said that my phone was made for Czech Republic and that's why my ROM update doesn't work...
The answer to second question is that i don't know
Can someone help me please? I don't know what to do now...
Btw the person from whom you bought the device is a resident of Romania?
Yes, he is.
okay can you go into bootloader mode and tell me everything on the screen
DIAM100 MFG 64G
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Please try again
USB
thankx. thats all i need for now. let me try to come up with a rom for you...
btw did you have any carrier logo before you ran into this problem...i mean like instead of the orange logo did you have any vodafone logo or just the htc logo during start up
AND do you have a front facing camera for video calls?
I had only the htc logo at start-up and i do have a video camera front facing.
Okay i found your stock ROM.
Do exactly as i say....
go to this link and scroll down to bottom...
http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2
when you go to the bottom of the page, you will be requested to enter ur SERIAL NUMBER which you just found under your battery.
Enter and press submit.
now select the file Windows_Mobile_6.1_East_Europe and start downloading...
let me know if the download has started also
I started the download ...
Okay good. So once the download complete you are ready to flash...
This is how to flash...
1. Put ur device in bootloader mode again.
2. Connect the device to ur PC
3. RUN the downloaded file....and press NEXT NEXT NEXT....
Reply back if the flashing process is goind smooth or even if you face any problem...
Then i can finally go and sleep

Categories

Resources