I am trying to unlock a XDA II. I have downloaded the XDA II V 2.2 unlock program copied it to the SD card , tried running it and got that it is not a valid pocket PC application.
Please help me.
ROM Version 1.72.00WWE
ROM Date 03/15/04
Radio Version 1.17.00
I think the posted link are corrupted
please check unlock files. I think they are corrupted. got it elsewhere and it worked.
Sounds like
Hi ya,
Sounds like ur trying to run the exe on the pda... Thats not how it works! Read the instructions again and ur see...
You need to get your pda into a special mode, the run the exe on your PC making sure that you disabled communications to pda via USB. Now the program will work..
Hi,
I am newbie at flashing;
My device HTC P3600 WM5 IT
Flash to WM5 WWE using SSPL (Soft SPL) 1.0 no problem...
thats works, so I thought i tried WM6 AX3L_WM6_WWE it says to use Hard-SPL, but when i try and put the Bootloader shows SPL-1.07.ds
Progress bar does not move and after a while the window "PDA Phone ROM Update Utility 3.1.3.2" gives "ERROR [260] : CONNECTION
I'm using Vista UE with the latest version of Windows Mobile Device Center.
Any ideas ??
Thanks in advance
Richard
TRY http://trinityguides.info/index.php?option=com_content&task=view&id=20&Itemid=66
looked at that already, my device manager has "Portable Devices- Windows Mobile-based device" and when try to update with the driver from TrintyGuide pc tells me that the driver is not suitable ........
Did you follow up the Vista Synch guide? There are important steps to follow to have a stable connection!
Good luck
there are instructions on that page (popup window when you click it) to show how to disable driver signing so that vista will let you load that driver.
try this and let me know if it works or not
Recently tried upgrading my SPV M3100 from WM5 to black WM6. Everything was going fine and I had installed the following
SPL (Bootloader) version 2.10.Olipro (HardSPL v7)
Radio version 1.43.00.00 (optional)
Was updating to ROM version: Windows Mobile 6 LVSW 160607 when USB cable was disconnected before installation ands I am now left with WM6 screen only
Can anyone help?
If you stuck in the wm6 boot screen and have flashed HardSPL 2.10 already you can just enter the bootloader and reflash your ROM again. Why do you use nearly 6 months old ROM (LVSW)?
Did you try to reflash the ROM?
Just switch to the bootloader and run the update again.
If the updater is complaining about "Not able to do so" you might need another ROM, but that method worked to or three times for me.
Cheers,
Jago
tried raflashing but activesync won't pick up phone
you do not need active sync to pick it up. Just enter the bootloader and run RUU.
how do you reflash without activesync?
Read this:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
richard_g_johnston said:
how do you reflash without activesync?
Click to expand...
Click to collapse
Simply - flashing process itself is not done by the Active sync (its icon is grey when flashing). I have tried to flash a ROM this way and it works. You just have to input correct values to the RUU yourself. Bootloader is the tri color screen. You can access it by holding power and ok button while using the stylus to soft reset the device. Hermes will pick up the usb connection.
Please read the WIKI and flash an original WM6/WM5 rom before attempting to flash a cooked rom.. then make sure you know what you are doing before flashing the cooked.
tried both
http://wiki.xda-developers.com/index...Hermes_Unbrick
http://forum.xda-developers.com/showthread.php?t=286755
still no joy
my device
IPL-1.04
SPL-2.10.0lipro
how do u run RUU in bootloader mode?
richard_g_johnston said:
tried both
http://wiki.xda-developers.com/index...Hermes_Unbrick
http://forum.xda-developers.com/showthread.php?t=286755
still no joy
my device
IPL-1.04
SPL-2.10.0lipro
how do u run RUU in bootloader mode?
Click to expand...
Click to collapse
Put your device into bootloader mode.
Connect it via USB to your PC.
Run the RUU on your PC (like if you had Active sync working).
Flash the ROM.
(should work with all cooked ROMs)
Update: I tried it now with the Schaps 4.20 - it is working.
When you run ruu it should create ROMUpgradeUt.exe if it says it fails to find the device just run this. I usually take a copy before clicking to close the error box.
where do u locate RUU.exe
sorry I'm not an expert in this
RUUWrapper.exe should be in the folder with the image you are flashing. Sorry if I confused you saying ruu.
When you download the cooked rom it comes in rar or zip containing 2 files - one with extension .NBH and the second one is RUUWrapper.exe (resource upgrade unit), unpack them to one folder and run RUU.exe Be sure to flash only ROM for your device otherwise you will kill it for good.
tried running RUU but get error 260, i.e. cannot pick up phone on USB
See post 12
yeah, tried running ROMUpgradeUt.exe, but still no joy
markafreeman said:
See post 12
Click to expand...
Click to collapse
If this does not work for you - then you can use flashing from the SD card (no USB needed for this kind of flashing) . But try what markafreeman suggests first.
Lets try some troubleshooting:
Whne you connect your device in the bootloader (red green blue screen) to your pc what does it say?
In the white part of the screen on your device it should say USB - then it will work.
If not you can still try flashing the ROM from the SD card - you will need a card reader though for this kind of flashing.
Hello everybody,
I tried to flash my Diamond with the 1.13.25.24 version, but I had an error message at the end.
The error code is :
"PSOC_DIAM STAGE_PVT v0x30"
Now, I'm blocked at the multicolor screen wich asks me to upgrade my ROM.
Is it possible to connect my phone to my PC without Windows Mobile ?
I must transfer a good ROM and reflash the diamond again !
Yhanx for your help !
If you see the RGB and white screen (bootloader) and connect your phone to the PC - do you see the word change from serial to USB?
If so just flash new ROM by running the RUU from your PC - just ignore the suggestion that you must be connected to active sync.
Hope this helps
You're right !
When I connect my phone, "serial" => "USB"
Now, the pb is that I am at work and I don't have the .net framework.
So I can't execute "DiamonCustomRUU.exe" !
Is there any way with the buttons to run the diamond as external storage ?
Hi Folks
Apologies, have been a member here for ages and am sure the forum rules have changed but...
Can anyone help me?
I loaded a SONE WinMob 6.5 RC2 WWE onto my touch diamond and now cannot load any other ROM.
Symptoms:
Host machine Win XP SP3
Download and extract "Duttys 5.2.20764.1.4.3_V4_Full_CVSD [3.02]"
Establish activesync partnership (green icon in system tray)
(ensure all advanced networking functionality is turned off via Settings->USB Connections)
Run: CustomRUU.exe
Output on XP
- verifying info on PDA Phone
- Current Image Version SONE
Update from:
Image Version: SONE
To:
Image Version: Duttys Diam v4
Next, next
Then I see Multi color boot screen on Diamond:
"Security Unlocked"
Diam140MFG
SPL-1.40.Olinex
MicroP-Diam (LED) v11
PSOC-Diam Stage_PVG v0x30
XP PC Error thrown:
Error [260] : Connection
(the usual connect your cable/cradle advice)
Have to reset phone then it runs win mob 6.5
I'm going to try another PC and other cables but has anyone else seen this sort of thing? Cannot find anything using search.
Thanks in advance
Yours
Leon
try to flash from internal memory...
i doubt its gunna be your cable if your the ruu can read from your device i have 3 suggestions you could try!!
1) use mitty to format ur device b4 you try to flash a new rom ( if you still cant flash after u will be left with no os on ur device tho )
2) try flashing a stock rom see if that works
3) try flashing using the internal storage method
best of luck
Hi Folks
It turned out to be a little more incidious than a cable problem.
The machine I tried from first was a completely fresh XP PRO SP3 build and the latest download of ActiveSync (all built in the last 48 hours).
The build that worked is months old. The binaries I have on the old and new builds both say Active Sync v4.5 but the one I downloaded a few months back to the other build was different from the one I downloaded most recently to the build that won't update.
Resolution: Flash from internal storage worked great! thanks
Also
Use the older binary for ActiveSync 4.5 which installs drivers (not signed) when the Diamond goes into multi color screen then continues rather than failing.
Hope that helps all
Yours
Leon