Hi Folks
Apologies, have been a member here for ages and am sure the forum rules have changed but...
Can anyone help me?
I loaded a SONE WinMob 6.5 RC2 WWE onto my touch diamond and now cannot load any other ROM.
Symptoms:
Host machine Win XP SP3
Download and extract "Duttys 5.2.20764.1.4.3_V4_Full_CVSD [3.02]"
Establish activesync partnership (green icon in system tray)
(ensure all advanced networking functionality is turned off via Settings->USB Connections)
Run: CustomRUU.exe
Output on XP
- verifying info on PDA Phone
- Current Image Version SONE
Update from:
Image Version: SONE
To:
Image Version: Duttys Diam v4
Next, next
Then I see Multi color boot screen on Diamond:
"Security Unlocked"
Diam140MFG
SPL-1.40.Olinex
MicroP-Diam (LED) v11
PSOC-Diam Stage_PVG v0x30
XP PC Error thrown:
Error [260] : Connection
(the usual connect your cable/cradle advice)
Have to reset phone then it runs win mob 6.5
I'm going to try another PC and other cables but has anyone else seen this sort of thing? Cannot find anything using search.
Thanks in advance
Yours
Leon
try to flash from internal memory...
i doubt its gunna be your cable if your the ruu can read from your device i have 3 suggestions you could try!!
1) use mitty to format ur device b4 you try to flash a new rom ( if you still cant flash after u will be left with no os on ur device tho )
2) try flashing a stock rom see if that works
3) try flashing using the internal storage method
best of luck
Hi Folks
It turned out to be a little more incidious than a cable problem.
The machine I tried from first was a completely fresh XP PRO SP3 build and the latest download of ActiveSync (all built in the last 48 hours).
The build that worked is months old. The binaries I have on the old and new builds both say Active Sync v4.5 but the one I downloaded a few months back to the other build was different from the one I downloaded most recently to the build that won't update.
Resolution: Flash from internal storage worked great! thanks
Also
Use the older binary for ActiveSync 4.5 which installs drivers (not signed) when the Diamond goes into multi color screen then continues rather than failing.
Hope that helps all
Yours
Leon
Related
I have a TyTN with official Russian WM6 onto it, which includes 1.16 radio version. I want a newer one, because this seems unstable, so i decided to update just radio (i don't want any cooked ROM or whatever for now).
Each new version of radio I found here failed earlier or later on a Vista x64 computer with error 260. What I have tried is 1.54.07.00 and 1.54.00.10 and 1.50.
To my surprise, packaging is different, but the effect is the same: after "Verifying the image on your device" (i can hear USB disconnecting and connecting back as the device enters bootloader) they time out with 260.
Right now I'm trying to revert what have I done to Vista as it won't allow me to turn off driver signing, as advised.
Ah, this doesn't work either (same error 260).
What am I doing wrong? My bootloader is, as said on that screen:
Code:
HERM200
IPL-1.01
HERM200
SPL-1.40.Olipro
Yes, I have installed some...er...thing before, maybe it was called "HardSPL", but it didn't come handy and wasn't any use to me as I decided against cooking a ROM.
Update: What I like the most is, despite all my attempts the device still works! Other than the radio troubles, that is.
I've updated from an SD card.
Try this my friend... http://www.mrvanx.org
Thank you, I did.
Please note the x64 drivers are unsigned so to use them successfully you must disable driver signing.
Click to expand...
Click to collapse
This is what I'm unable to do, but I suppose is beyond this forum.
Hi
I have had the same problem with my x64 vista pc and the 260 error msg. It took me hours but what seemed to finally fix it for me was to:
1. completely remove WMDC from the pc, reboot the pc,
2. reinstall WMDC plus upgrade,
3. uncheck the allow USB connections option on your 8525, exit out of the window, then do a soft reset
4. now make a USB connection w the PC
Let us know how it works
Sorry, you'll have to wait till my next upgrade Everything is working so far - so until I need something that can't be achieved using SD flashing I'll stick to this technique. Thanks for the advice anyway.
If anyone can help i have a hp ipaq h2200 and i tryed to do a bios update but now it`s stuck the onley thing that shows me is a image with hp,usb and v1.08 can anyone help me please?is there any way i can make it work again?is there any ROM for this kind of device maybe a wm5 or wm6?
no one can help me?
Profy_X said:
If anyone can help i have a hp ipaq h2200 and i tryed to do a bios update but now it`s stuck the onley thing that shows me is a image with hp,usb and v1.08 can anyone help me please?is there any way i can make it work again?is there any ROM for this kind of device maybe a wm5 or wm6?
Click to expand...
Click to collapse
go boot loader mode before upgrade
but how do i do this?it isn`t in bootloader?(it shows a hp image up shows usb and down v1,08)
...
First important question: what upgrade did you try to do?
For iPAQ h2200 there is no cooked ROMs: WM5 or WM6x. This device can work only under branded WM2003se.
If you tried to do upgrade to any of cooked ROM like WM6.0 from different device like hx22xx by mistake, please try the following:
1. Go to HP www page and download the last available ROM upgrade (I assume English ROM)
2. Turn on iPAQ (don't carry the device doesn't boot properly) and place it to the cradle which should be connected to PC which has installed active sync software (please don't carry about lack of connection seen on active sync).
3. Run the ROM upgrade.
If you tried the HP upgrade and it stuck - just repeat them with the way described above.
Important - do not use blue tooth connection during flash !!! Only USB !!!
Good luck.
If it doesn't help I believe there is hundred of similar cases described in forums - try to search the solution there
bigu1975 said:
This device can work only under branded WM2003se.
Click to expand...
Click to collapse
More precisely: WM2003 only - no SE upgrades for the h2210.
i upgraded the v1.10 original ROM from HP home site but now i solved the problem with mtty and ultra edith but now i have a nother problem i flashed again the ROM but its stuck on the loggin bar from startup it just fill the bar but windows doesn`t start i tryed again to flash and the problem still persist any sollutions?
Profy_X said:
i flashed again the ROM but its stuck on the loggin bar from startup it just fill the bar but windows doesn`t start i tryed again to flash and the problem still persist any sollutions?
Click to expand...
Click to collapse
As I understand you correctly - you restored your iPAQ into live using the last available ROM from HP site, which is WM2003 (thank you Menneisyys). The iPAQ worked fine and then you was trying to make another ROM upgrade - which ROM did you use?
I am asking because the ROM in version 1.10 is the most actual one and there is no any other ROM for this device. I assume that source of your problem is you are trying to use incorrect ROM. Correct me if I am wrong... If this is true - the solution is to restore your device into operational using the way as you did it before and stop to flashing your device - there is no another ROM to your iPAQ
the v1.10 but the problem is that after i flash the wm doesn`t start it just stay there stuck on the startup and i reflashed the device but still doesn`t start
how did u fix the stucked screen while booting? im searching for solutions for 30 mins now, but dind't find a way...
please help somebody..
ok, for those with "same" problems like me:
i have windows 7 64bit. the rom flashing wasn't successfull on this machine. i did the same on my notebook with windows xp and it worked. before it said that it couldn't find my ppc. on the notebook it wasn't a problem.
i had these installation notes found anywhere:
1.) Go to the Vendor Website, and...
2.) Select the appropriate hyperlink for your model.
3.) Download the most recent BIOS version.
4.) Press the POWER + iTASK + CONTACTS + RESET buttons at the same time so as to enter the FLASH Mode
5.) Make sure your USB connection to the Cradle is hooked-up.
6.) Place your PDA in the USB Cradle.
7.) Stop the MS ActiveSync session on your HOST PC: CTRL-ALT-DELETE > TASK MANAGER > PROCESSES.
8.) Highlight WESCOMM.EXE and select "End Process" button.
9.) Run the file you downloaded from your Vendor in step 3.
10.) The PDA should now begin Flashing the iPAQ's ROM BIOS.
i ignored step 4.)
hope that it helped somebody
Hello everybody,
I tried to flash my Diamond with the 1.13.25.24 version, but I had an error message at the end.
The error code is :
"PSOC_DIAM STAGE_PVT v0x30"
Now, I'm blocked at the multicolor screen wich asks me to upgrade my ROM.
Is it possible to connect my phone to my PC without Windows Mobile ?
I must transfer a good ROM and reflash the diamond again !
Yhanx for your help !
If you see the RGB and white screen (bootloader) and connect your phone to the PC - do you see the word change from serial to USB?
If so just flash new ROM by running the RUU from your PC - just ignore the suggestion that you must be connected to active sync.
Hope this helps
You're right !
When I connect my phone, "serial" => "USB"
Now, the pb is that I am at work and I don't have the .net framework.
So I can't execute "DiamonCustomRUU.exe" !
Is there any way with the buttons to run the diamond as external storage ?
Hi all, i just bought my HTC diamond today and it came with the spl 1.93.00.. I tried upgrading to the signed and unsigned versions of Olinex 1.93 hard spl..... But the process starts but the progress bar is stuck at 0% and is not moving.... Can someone please help me out.
Hi 1onew0lf,
I have very similar problem, spent the whole day trying to update to Hard-SPL
I have a MDA Compact IV - T-Mobile (German) version of Diamond.
The original SPL, if I go to a boot loader mode, shows:
DIAM200 64M
SPL-1.93.0000
MicroP-Diam (LED) v11
PSOC-Vict STAGE_PVT v0x20
Click to expand...
Click to collapse
Original ROM Versions are:
ROM-Version: 1.93.111.2 GER
ROM-Date: 09/24/08
Radio-Version: 1.00.25.16
Protocol-Version: 52.29a.25.13U
Click to expand...
Click to collapse
When I try to run ROMUpdateUtility.exe after answering "Yes" (Ja) on the screen of Diamond on the request to place the enterbootloader.exe into \Windows directory the device goes black screen and never comes back.
After 1-2 min. the ROMUpdateUtility.exe utility gives an Error 260: CONNECTION and informs that USB is disconnected, the Active Sync is already long time grayed out.
I tried a trick described in the pinned forum to run SSPL manually: I copied SSPL-Manual.exe into a Temp folder on the device and launched it from Diamond with the same effect: black screen till I do a soft reset of device. I have found somewhere a tip to update the .NET CF to the latest version, and I did so have now .NET CF 3.5 on the device, it didn't solve the problem.
So I may assume that device somehow is not able to switch to SSPL mode, but nobody speaks of such problems!
Looking for anyone who may help us to solve this problem!
Thanks in advance!
yepiee! I actually did it! I managed to update to Hard-SPL
So, first of all the black screen IS actually the SSPL mode of device. My only problem was that USB drivers were not automatically configured. I'm not sure is it a problem with Windows XP SP3, or I messed up some settings for USB devices long time ago.
So what I did is before starting ROMUpdateUtility.exe I opened the Windows Device Manager and placed at the background. Then started the regular procedure of updating to Hard-SPL.
At the moment the screen of the device turned to black a new USB device appeared in the Device Manager, but with exclamation sing giving me a hint that no proper driver found/configured automatically.
Right click -> Update driver... -> Search for suitable driver - did a trick for me. I picked up a second driver from the list of choices with number 32 instead of 16. After the driver was successfully installed the update continued and eventually ended with congratulation message about successful update!
I hope my experience may help someone as well.
endlessspace said:
yepiee! I actually did it! I managed to update to Hard-SPL
So, first of all the black screen IS actually the SSPL mode of device. My only problem was that USB drivers were not automatically configured. I'm not sure is it a problem with Windows XP SP3, or I messed up some settings for USB devices long time ago.
So what I did is before starting ROMUpdateUtility.exe I opened the Windows Device Manager and placed at the background. Then started the regular procedure of updating to Hard-SPL.
At the moment the screen of the device turned to black a new USB device appeared in the Device Manager, but with exclamation sing giving me a hint that no proper driver found/configured automatically.
Right click -> Update driver... -> Search for suitable driver - did a trick for me. I picked up a second driver from the list of choices with number 32 instead of 16. After the driver was successfully installed the update continued and eventually ended with congratulation message about successful update!
I hope my experience may help someone as well.
Click to expand...
Click to collapse
Thx, your hint was very helpful!
I've been reading this forum and the internet for about 4 days now,
hence I post this question...
I have an HTC P3300 (Artemis) and tried flashing windows mobile 6.5 onto the ROM..
it reached about 56% when the usb cable got unplugged and the flash failed.
I can get it into bootloader mode...
I'm from India and the original carrier was Idea.(I suppose so, because it had an Idea screen for a few seconds when the phone was switched on)
I used to use a Vodafone SIM, so I guess it was already CID unlocked.
Tried flashing various roms.. including the HTC windows mobile 6.0 worldwide edition, the t-mobile edition and the sprint edition from this site, after putting it into bootloader mode.
Windows Mobile Device Center will obviously not run, as the phone doesnt go beyond displaying this :
IPL 3.07.0001
SPL 3.07.0000
GSM 02.69.90
OS 1.27.0.0
I havent done a HardSPL and I suppose that the ROM flash only changed the OS ... everything else was probably the same.
I can't get mtty to work via USB....nonetheless, I have no clue how to use mtty.
Here are the filenames of the ROMs i've tried:
1. Evolution 23820 ...(downloaded off some site with windows mobile screenshots that got me all "WOW!")
2. Artemis Vanilla 2.0 WWE
3. ART_TMOUK_11311001_024990_WWE_Ship_R3.exe ..(T-mobile)
4. HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R.exe ..(this one should have worked)
5. HTC_P3300_NLD_3.13.404.1_4.1.13.44_02.94.90_Ship_R.exe ..(this one's probably german)
6. Microsoft Windows Mobile 6.0 (some .uif cd image that i downloaded off rapidshare..about 65 MB)
7. Opal_WM6.5_D24_21901_COM2_WWE (I know I shouldn't have tried this, but this was my first attempt after successfully updating a touchviva to windows mobile 6.5, but I was a complete n00b back then..)
I tried all these ROMs mostly using a "ROM Update Utility" included with the package..
I also tried getting the .nbh files out and putting them on a 1GB microSD after renaming them "ARTEIMG.nbh" ...it used to say "Checking SD card".. and then would show the RGB bootloader again with :
IPL 3.07.0001
SPL 3.07.0000
Errors I received while flashing through USB :
1. Invalid Vender ID (390)
2. Connection Error (260)
it generally stops at 3%
What should I do now?
Thanks for reading.
ouhh doesnt look very good. but happens aaand can be solved.
try this:
Hardreset your phone
or reinstall the originalrom in bootmode: link
please keep care of the usb cable. or try to reflash your phone via sd-card. its very easy and less dangerous.
tried both
hard reset lands u to the same place.. HTC logo and IPL SPL GSM OS...
installing the rom from the link given ... shows a connection error(in bootloader mode)
and did you try to install another rom via sd card.
wihtout pc-connection?
You have to first unlock your device by uspl and then install the rom or simple way is by using sd card. Search the forum for upgrading Artemis by sd
ok, but how do i use uspl if all i can get to is bootloader mode?????
i thought that u need to have windows mobile running well to use uspl...
WM5 English ROM
Does anyone have the windows mobile 5 english rom for artemis?
I tried the french WM5 rom from rapidshare.. but it doesnt work...
I got it to work!!!!
thanks to all you helpful kind smart people at xda!
well.. you people kept me searching for answers...
i found the original rom at an htc south asia site.. windows mobile 6.0
the htc artemis p3300 is also called "dopod" on that site...
anyway... the only reason i couldnt get to it in the start was that it said the cellphone serial number i'd entered wasn't eligible for the update..
i just messed with the last few digits (interchanged them) and got it to accept the download...
that was plain lucky,...
but it wouldve never happened if i hadn't tried..
now.. i'm going to do an artemis uspl via windows mobile device center according to the guides on various fora..
thanks people!
i want to post the rom to some site so that people can get it even 3 years from now... (most of my links were all from 2007.. so the rapidshare downloads hardly ever worked!).. but i don't know how..