Help Please - P3600 ROM Development

Hi,
I am newbie at flashing;
My device HTC P3600 WM5 IT
Flash to WM5 WWE using SSPL (Soft SPL) 1.0 no problem...
thats works, so I thought i tried WM6 AX3L_WM6_WWE it says to use Hard-SPL, but when i try and put the Bootloader shows SPL-1.07.ds
Progress bar does not move and after a while the window "PDA Phone ROM Update Utility 3.1.3.2" gives "ERROR [260] : CONNECTION
I'm using Vista UE with the latest version of Windows Mobile Device Center.
Any ideas ??
Thanks in advance
Richard

TRY http://trinityguides.info/index.php?option=com_content&task=view&id=20&Itemid=66

looked at that already, my device manager has "Portable Devices- Windows Mobile-based device" and when try to update with the driver from TrintyGuide pc tells me that the driver is not suitable ........

Did you follow up the Vista Synch guide? There are important steps to follow to have a stable connection!
Good luck

there are instructions on that page (popup window when you click it) to show how to disable driver signing so that vista will let you load that driver.
try this and let me know if it works or not

Related

WM6 and Vista Sync

Hi all.
Finally update my M3100 to WM6 (thanks to LVSM) and i can't connect with my Windows Vista desktop using latest driver from Microsoft.
I can connect with Windows XP box with Active Sync 4.5 without any problem.
Anyone get this working or am i crazy?
Thanks all.
Windows VISTA has a new activesync.
If you connect your device, you should see that Vista auto detects your phone.
But you can't install programs etc.
Then you have to run Windows Update to dowload an additional package, so you
can install programs etc.
So if your Vista ain't that legal, then don't try.
I had installed the XDA Live 0.1 last week without issues (via WinXP)
When I tried to upgrade to the 0.2 it hung in boot loader (tri-colour screen), while using Vista w/ AS4.5.
I had to hard reset to get it to go back to 0.1, but it hasn't really been the same since.
I d/l the new WM6 LVSM and tried to upgrade, but it also hangs in tri-colour mode.
Now is it a problem because I'm running Vista?
1V4NW00 said:
I had installed the XDA Live 0.1 last week without issues (via WinXP)
When I tried to upgrade to the 0.2 it hung in boot loader (tri-colour screen), while using Vista w/ AS4.5.
I had to hard reset to get it to go back to 0.1, but it hasn't really been the same since.
I d/l the new WM6 LVSM and tried to upgrade, but it also hangs in tri-colour mode.
Now is it a problem because I'm running Vista?
Click to expand...
Click to collapse
If I am not mistaking, you can't upgrade with Vista.
There is a workaround for it, but standard it's not possible.
Upgrade trough Windows XP.
vayip said:
If I am not mistaking, you can't upgrade with Vista.
There is a workaround for it, but standard it's not possible.
Upgrade trough Windows XP.
Click to expand...
Click to collapse
Thanks I was thinking i could just use Vista.
I guess I should have just stayed on XP on my primary PC instead of upgrading to Vista so damn quick...LOL
1V4NW00 said:
Thanks I was thinking i could just use Vista.
I guess I should have just stayed on XP on my primary PC instead of upgrading to Vista so damn quick...LOL
Click to expand...
Click to collapse
Well, i expose my complete experience with Vista (of course legal copy )
I have one Qtek 9100 and one TyTN (SPV M3100 Spanish Orange).
days ago both of them with WM5 (original branded)
Yesterday move qtek 9100 to WM6, but can't do with Vista so i do in a VMWare Windows XP box running into Vista with VMWare Workstation (this works very fine). once the 9100 was WM6, Vista says taht the device is new and can't find the driver, but one day before works fine.
So today upgrade my TyTN with the same, put the RUU in the XP box, and works fine, but the same results in Vista and Mobile Sync. Works with SM5 but not with WM6. But in XP box, works with boths.
I think MS checks the OS version in Vista Sync, so you can't sync if the OS version isn't in the list of legal OS mobile.
I am running Windows Vista Ultimate and have WMXL 0.20 on my phone.
I can connect my phone to vista and i can browse my phone. I see the storage card and the internal memory.
You can't install application trough this.
If you want to install application when using Windows Vista, connect your phone with the USB cable, wait for Windows to detect your phone and install the drivers, then run Windows Update.
Then it will download an package so you can install applications.
Windows Vista uses the new Mobile Sync Center hence the RUU cannot connect with your PDA... if you replace the Mobile Sync Center drivers with the activesync ones you can get it to work...
there is a search button on the top right of this forum... as this topic has been discussed and answered many times before i suggest you use the search feature as it works wonders....
I installed Windoes Mobile Device Center on Vista, and I did not have a problem getting it to recognize my hermes w/ XDA-live 0.20. I did nothing special, just plugged it in, it was recognized, I configured it, and it syncs no problem.
Ross
Perhaps is a languaje diference, my Vista is Spanish and my WM6 is english.
jcespi2005 said:
Perhaps is a languaje diference, my Vista is Spanish and my WM6 is english.
Click to expand...
Click to collapse
no language difference... you cannot run the RUU update in Vista!!! jesus man read the posts.... unless you change the Mobile Sync Center drivers you cannot use the updater!!!
walshieau said:
no language difference... you cannot run the RUU update in Vista!!! jesus man read the posts.... unless you change the Mobile Sync Center drivers you cannot use the updater!!!
Click to expand...
Click to collapse
Ok, i dosn't express correct. The question is the conectivity, not so only run RUU, but get acces to device.
With Vista (spanish version) i can't get acces to WM6, and i try two devices, Qtek 9100 and TyTN. a couples of days before both of them were with WM5 and can access without any problem. So i think Vista can read the version my devices says to be and be confused with the driver to use. Were can i find the drivers to make this work. Anyone says i can put activesync 4.5 drivers in Vista, is this correct?
So i must to connect to my XP box into VMWare and access trought this. so i can access and update usgin RUU.
Thanks.
jcespi2005 said:
Ok, i dosn't express correct. The question is the conectivity, not so only run RUU, but get acces to device.
With Vista (spanish version) i can't get acces to WM6, and i try two devices, Qtek 9100 and TyTN. a couples of days before both of them were with WM5 and can access without any problem. So i think Vista can read the version my devices says to be and be confused with the driver to use. Were can i find the drivers to make this work. Anyone says i can put activesync 4.5 drivers in Vista, is this correct?
So i must to connect to my XP box into VMWare and access trought this. so i can access and update usgin RUU.
Thanks.
Click to expand...
Click to collapse
did you download the spanish version of Mobile Device Center or the english version???
walshieau said:
did you download the spanish version of Mobile Device Center or the english version???
Click to expand...
Click to collapse
Spanish. I must wait since installs Vista two weeks for the spanish version of the device center
i have Spanish Vista & Orange M3100 with english WM6 from LVSW. Activesync is working fine using of course the spanish download of windows mobile device center 6.
The only problem i have is that i don't have internet connection connecting activesync by usb.
Does Anyone have the same problem?
Any ideas about my problem?
TIA
fourcc said:
i have Spanish Vista & Orange M3100 with english WM6 from LVSW. Activesync is working fine using of course the spanish download of windows mobile device center 6.
The only problem i have is that i don't have internet connection connecting activesync by usb.
Does Anyone have the same problem?
Any ideas about my problem?
TIA
Click to expand...
Click to collapse
I'm in your same situation.
Im my case, Vista dosn't find the correct driver for my M3100 with LVSW WM6 (perhaps i make a mistake installing, i'll reinstall Vista soon ) In XP box no problem to do that, and gain Internet connection from M3100 to get sync with Exchange server trought Internet.
How do you set the connection in Device Center?
Everything is working fine under vista for me.
I am able to:
-use ICS through USB, PAN
-manage installed programmes
-browse the device
...
I am using an english vista + an english WM6 tytn ROM
Anyone else notice that with XP and Activesync you can see and browse to your Windows folder on the PPC, but through Vista that folder is completely hidden and there seems to be no way to browse it??
m15chief said:
Anyone else notice that with XP and Activesync you can see and browse to your Windows folder on the PPC, but through Vista that folder is completely hidden and there seems to be no way to browse it??
Click to expand...
Click to collapse
You just need to enable viewing of System folders in Folder options
I'm using Vista since the first day and I have updated my TyNT with LVSW ROM and everything works.
Bluetooth activesync / USB activesync / Pairing with Outlook 2007 / Seeing all the files on Main Memory and Storage Card....
All put in one word, everything is perfect.
Only one thing hasn't worked : I haven't been able to update using Vista.

Using Windows Vista

I just post this thread in order to help others which are having the same problem as I am and to avoid looking arround on all the posts for this answer.
I'm so happy that I've not yet test this procedure wanted to share with you ASAP.
Thanks pvdhelm
pvdhelm said:
Follow these instructions and your vista problem is over.
I used this guide and it works for my artemis p3300 phone!
Please try downloading the latest WMDC first before attempting anything in this section of the guides. you will find the latest version HERE .
To follow this guide please make sure you have a copy of WinRAR installed, I will refer to the Windows Mobile Device Centre as the WMDC for ease of reading. If you do not have the WMDC installed please go here to install it first.
One problem with windows VISTA is that it uses the new "Windows Mobile Device Centre" and not activesync which we are used to, thus our standard RUU programs will not upgrade our Hermes devices as in windows XP. This guide will show you how to configure VISTA to work just the same as XP with our RUU programs.
For this guide firstly you need to download the new drivers:
Drivers for Windows Vista x32
Drivers for Windows Vista x64
Please note the x64 drivers are unsigned so to use them successfully you must disable driver signing.
Extract the contents to a folder on your desktop, call this folder "AS_DRIVERS". It contains the drivers from activesync which we will use instead of the native VISTA WMDC drivers when the device is in bootloader.
Now you must enter the bootloader on your device, to do this press and hold both the side ok button and the power button then put your stylus into the hole on the bottom of the device, your device will reset and show the red blue green bootloader screen. LEAVE THE DEVICE IN BOOTLOADER MODE and connect it using the USB cable to your VISTA PC.
Now navigate into the WMDC (Start>All Programs>Windows Mobile Device Center) and click on the "connection settings" menu icon
In the connection settings menu untick "allow USB connections" then press OK.
Now exit the WMDC and return to the desktop, go into the start menu and type "Services", this will take you into the local services dialogue and show a list of all services either running or registered with your pc.
Scroll down the list and make sure these services are present:
Windows Mobile-based connectivity
Windows Mobile 2003-based connectivity
If these services are not started then double click each one and set them to Automatic start by clicking the "startup-type" drop-down menu and selecting automatic then click the start button in the same window, apply the setting by pressing OK. Now return back to the desktop again.
Go into the start menu and type "Device Manager" then run, this will take you into the device manager. Click the "+" symbol next to "Mobile Devices" and double click on "HTC USB Sync".
This will bring up the properties of the currently connected device (the hermes in bootloader).
Go to the "Driver" tab and click "Update Driver".
Click "Browse My Computer for Driver Software".
Select "Let me pick from a list...."
Click the "Have Disk" button.
Click "Browse" and navigate to the AS_DRIVERS folder we created earlier.
Vista x32 users select the file "wceusbsh.inf"
Vista x64 users select the file "wceusbshx64.inf"
Then click Open.
click next and the driver will be installed (wait a moment).
Press close and escape back to the desktop now.
Now we must stop the WMDC process, start the task manager by pressing Ctrl+Shift+Escape.
click the WMDC line and click "End Process". In the confirmation window, again press End Process.
Now re-enter the WMDC and re-enable USB connections (click connection settings and tick the box "enable USB connections").
Your RUU programs for HardSPL/Radios/WM6 ROMs should now run as desired once you are synced with WMDC. Since we have updated the driver which vista uses when the device is in bootloader mode.
NOTE:: This technique is still in testing so if you have any issues please post in the official thread. Until we find another way to get RUU working with vista you may need to revert back to XP for upgrading your Artemis.
Click to expand...
Click to collapse
Just test it without any problem. I confirm the feasability of this procedure.
It rocks!
Always restart after before trying. It has worked with me.
Ha, Well I have tested and all works well, after this I've flashed USPL and B&B 3.7 ROM with no difficulty.
Now if I could only figure out why Mobile device Center will not install properly on my Vista Ultimate that I just 'upgraded' to today. It connected once, ran the sync but did not back up the contacts on my phone to outlook, and now on subsequent tries, the program wont open because of 'unknown problems'.
Maybe it's a sign to roll back to XP.
uninstall wmdc and then re-install. I had this error at first but fixed now.
Shand359 said:
uninstall wmdc and then re-install. I had this error at first but fixed now.
Click to expand...
Click to collapse
I had a feeling, I did that procedure once already with redundant results....but then again, half of my peripherals such as DVD-ROM, or wireless card didn't work, but then miraculously started working just as I was about to teach my laptop how to fly.
I will keep trying, thank you.
itschase said:
I had a feeling, I did that procedure once already with redundant results....but then again, half of my peripherals such as DVD-ROM, or wireless card didn't work, but then miraculously started working just as I was about to teach my laptop how to fly.
I will keep trying, thank you.
Click to expand...
Click to collapse
I'm not sure if that is the problem, but did you tried after restart vista?
When I made the procedure it was not working and then tried to restart and it was perfect.
Bluetooth sync works fine, but USB won't load driver. WM5 OEM, so no bootloader on my 8525. Will this solve my USB problem?
Hmm .. tried to follow the process above and Vista told me I already had the most recent version of the driver .. strange huh ?
For French :
http://www.forummobiles.com/index.php?showtopic=136003&hl=nuls
scratch that .. i missed a bit
Shand359 said:
uninstall wmdc and then re-install. I had this error at first but fixed now.
Click to expand...
Click to collapse
Agreed. Some 'versions' of windows Vista have WMDC built in, it is no good, uninstall WMDC and download the version from MS web site. Once installed run Windows Update.
owencutajar said:
Hmm .. tried to follow the process above and Vista told me I already had the most recent version of the driver .. strange huh ?
Click to expand...
Click to collapse
I had this issue too, uninstall vista drivers first, then install those from XP.
I followed these directions to update my Himalaya/Alpine-like i-mate PDA2 with disappointing results -- at first. WMDC claimed there was an error and I could not get it to respond. I flounced away and pouted for a little bit, and when I came back decided the only thing I could think of to change now before re-installing WMDC altogether was to roll back the driver for the mobile devices (in device manager) and WA-LA! Pouting works! I am now able to sync and Klaus (the i-mate) plays nice with Bob (PC)... ah, household bliss!
Thanks!
i still cannot get my laptop to see the artemis when it is bootloader mode - i have the XP driver on!!!!
I would love to try it, but does anybody have a german manual, or a translation program that translates Windows English into Windows German?

Update just radio in Vista

I have a TyTN with official Russian WM6 onto it, which includes 1.16 radio version. I want a newer one, because this seems unstable, so i decided to update just radio (i don't want any cooked ROM or whatever for now).
Each new version of radio I found here failed earlier or later on a Vista x64 computer with error 260. What I have tried is 1.54.07.00 and 1.54.00.10 and 1.50.
To my surprise, packaging is different, but the effect is the same: after "Verifying the image on your device" (i can hear USB disconnecting and connecting back as the device enters bootloader) they time out with 260.
Right now I'm trying to revert what have I done to Vista as it won't allow me to turn off driver signing, as advised.
Ah, this doesn't work either (same error 260).
What am I doing wrong? My bootloader is, as said on that screen:
Code:
HERM200
IPL-1.01
HERM200
SPL-1.40.Olipro
Yes, I have installed some...er...thing before, maybe it was called "HardSPL", but it didn't come handy and wasn't any use to me as I decided against cooking a ROM.
Update: What I like the most is, despite all my attempts the device still works! Other than the radio troubles, that is.
I've updated from an SD card.
Try this my friend... http://www.mrvanx.org
Thank you, I did.
Please note the x64 drivers are unsigned so to use them successfully you must disable driver signing.
Click to expand...
Click to collapse
This is what I'm unable to do, but I suppose is beyond this forum.
Hi
I have had the same problem with my x64 vista pc and the 260 error msg. It took me hours but what seemed to finally fix it for me was to:
1. completely remove WMDC from the pc, reboot the pc,
2. reinstall WMDC plus upgrade,
3. uncheck the allow USB connections option on your 8525, exit out of the window, then do a soft reset
4. now make a USB connection w the PC
Let us know how it works
Sorry, you'll have to wait till my next upgrade Everything is working so far - so until I need something that can't be achieved using SD flashing I'll stick to this technique. Thanks for the advice anyway.

Can't exit bootloader screen

Hi,
I tried to upgrade my XDA using Ranju's latest updater, the whole process failed and now I'm stuck at the BL screen "USB" at the top (when connected, otherwise it says "serial") and "v1.00" at the bottom.
My PC, SyncCentre and Windows Mobile Device Centre (I'm using Vista) all show the device as being disconnected (up until trying to upgrade everything had been fine).
As it's not showing up on my PC all of the software options for recovering it dont fail, all end with a plethora of USB not connected errors etc
I've tried the how-to on the wiki: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial to no avail.
Does anybody have any ideas? Greatly appreciated,
Thanks,
Lee
with jasjar-bl1.01-ruu-v1.2 I always restart my JJ Leave your uni in bl and start the application Good luck......
I think the Vista is not the problem this upgrade don't use AS or "in italian centro gestione dispositivi WM"
Bye
M.C.
Well, I flashed my Qtek a while ago, it failed to flash (using Vista) and doing a hard reset after it whas hanging at the startupscreen(the one with all the rom/radio numbers). No matter what I tried, following the instructions on Vista windows mobile center all failed... The good news is that your computer and your PDA still see when it is connected, ie USB/Serial, like in my case!
I then tried it on my desktop/XP, it flashed without a problem...
The funny bit is that I flashed my herald (WM6) 2 times using Vista without any problem...
I cannot explain but if U have the possibility, try and see if it works on XP...!
Good luck!
are you trying to flash it WITH your SIM card and / or SD card inside? If so, try taking them both out! It worked for me a few times!
I would start by getting rid of vista !
i had the same xprience
the different was i downgrade from wm6 to wm5 (i need the vcall)
failed in vista, succeed in xp
-> my advice : try in xp !! don't forget to remove the sd card
Manual for how to flash a rom in Vista
Read this post, you have the solution to the problem here:
http://forum.xda-developers.com/showthread.php?t=313001
You need to update the driver manually, if not, will not be able to install the driver.
You need to do this without sd/sdhc and without the sim.
If you follow these instructions, you can flash with success.
Greetings.
Kali.

Artemis noob needs help for WM 6.1 upgrade

Hello,
i just got my artemis and tried to upgarde it...
But any Rom I downloaded causes errors while flashing...
Something like USB connection error [260] and something like file corrupt error [270]...
I found also how to unlock cid but that doesn´t work to...
I use Vista and the new mobile device center 6.1 and my artemis is an german o2 version.
I get the same errors if i use XP and activesync 4.5....
Any suggestions????????????
I don´t know how to go on. And I didn´t find any Thread that helps me...
Hope anyone could help me...Thx!
Hi ,
First , i sugger you to use XP . I never can upgrad with Vista ( i have vista ultimate )
I do this with xp :
1.First be sure activ sync is active when you put your p3300 on your usb
2.Download this version of uspl (it always work for me with this version ) :
http://www.megaupload.com/?d=PTFMGKAD
3.Choose your rom . I suggest you this :
http://forum.xda-developers.com/showthread.php?t=401062
4.Unzip the first file you download in 2. You will find a file called RUU_USPL_signed.nbh. Delete it and remplace by the .nbh you dowload in 3.
5.Run start_uspl.exe
You CAN Flash in Vista
Read this thread and you wont have any problems flashing in Vista:
http://forum.xda-developers.com/showthread.php?t=313001
Just remember to remove your memory card before you flash.
dmro said:
Read this thread and you wont have any problems flashing in Vista:
http://forum.xda-developers.com/showthread.php?t=313001
Just remember to remove your memory card before you flash.
Click to expand...
Click to collapse
ofcourse u can flash with vista... even with VISTA ultimate...
jst make sure u have windows mobile device centre running... and that the pocket pc can connect to the vista pc...
i have been using VISTA ULTIMATE for the past 8 months and no problem... its cool..
Same problem
Hi,
I have the a P3300 as well, and tried to follow the same instructions, but I still get the same error 270 image corrupt, it goes to 3% and sometimes to 6% and stops giving that message.
Did you manage to get it work by any chance ????
theorthodontist said:
Hi,
I have the a P3300 as well, and tried to follow the same instructions, but I still get the same error 270 image corrupt, it goes to 3% and sometimes to 6% and stops giving that message.
Did you manage to get it work by any chance ????
Click to expand...
Click to collapse
I can't be sure but it may be something to do with XP SP3. I had the exact same problem but when I tried it on another laptop (same hardware) with XP SP2 it worked fine

Categories

Resources