PhoneAlarm v1.22 automatic LAN activation - MDA III, XDA III, PDA2k, 9090 General

Even if PhoneAlarm has it in one of the profiles to active radio for wireless LAN, it does not do it on my BA.
Does anybody have the same problem?
Is there a fix for this?
Many thanks for your help. :?:

Probably should be answered over at Pocketmax but here goes anyway ...
If you look on the Pocketmax site you should find somewhere mentioned that the WiFi section is still not complete (Think it says it on the config section in PhoneAlarm). I found an old v1.21 beta 4 worked OK on my BA but recent versions have stopped working.
The author is on holiday at present but think he is looking at this problem.

Thanks for the feedback, will look into this further.

Related

WM6 and MS VC 1.6

Please forgive me if this has been answered anywhere on this board but I have diligently searched without an answer.
I understand there is a conflict with the BT stack that does not allow MSVC 1.6 on the TyTN (as well as other devices) to operate as intended through a BT earpiece but is this something that can be solved through one or more of the kitchen roms such as LSVW's? I am using this ROM and love it as it is extremely functional and stable. If only I could have MSVC 1.6 work as intended I would be able to move onto a softphone software that would work with my SPA9000 IP PBX while out of the office.
Thank you for all that can shed some light on this problem.
Here you go. I searched "bluetooth fix" and it came right up!
http://forum.xda-developers.com/showthread.php?p=1161666&highlight=bluetooth+fix#post1161666
allen363 said:
Please forgive me if this has been answered anywhere on this board but I have diligently searched without an answer.
I understand there is a conflict with the BT stack that does not allow MSVC 1.6 on the TyTN (as well as other devices) to operate as intended through a BT earpiece but is this something that can be solved through one or more of the kitchen roms such as LSVW's? I am using this ROM and love it as it is extremely functional and stable. If only I could have MSVC 1.6 work as intended I would be able to move onto a softphone software that would work with my SPA9000 IP PBX while out of the office.
Thank you for all that can shed some light on this problem.
Click to expand...
Click to collapse
WM6 does not fix anything in regards to BT audio.
The Hermes forum has a thread - MS Voicecommand 1.6, the fix is in that thread.
Most of the fix is in the Wiki under MS VC 1.6, but the actual mortscript is attached here - just rename it from .txt to .mortrun
I couldn't get the file to attach or paste in properly in the wiki - if anyone wants to fix???
The post above
is the correct fix for his issue. Jules solution contains a CAB file that works perfectly for the exact issue I was having.
pkley said:
WM6 does not fix anything in regards to BT audio.
The Hermes forum has a thread - MS Voicecommand 1.6, the fix is in that thread.
Most of the fix is in the Wiki under MS VC 1.6, but the actual mortscript is attached here - just rename it from .txt to .mortrun
I couldn't get the file to attach or paste in properly in the wiki - if anyone wants to fix???
Click to expand...
Click to collapse
Thanks to everyone who replied but I was not specific enough. I am using Jules' fix which works great but it doesn't solve to problem of caller id and other announcements being able to be routed through the bt headset. That's what I was referring to.
The only thing really working at the moment is getting voice dial to work through the headset..
Inbound callerID announcements are not and likely will not work. All patches I've seen do not address this issue as I believe it is an issue with the BT stack itself.
As for routing audio to your headset (other than Caller announcements) use Mortscript and the script I posted - it toggles between allowing MSVC and audio.

Wireless stereo on XDA IIi (missing bthutil.dll)

Hi,
Sorry, I know this topic is like a boomerang, but after searching all the posts I still cannot find the answer.
I'm using O2 XDA IIi with WM 2003 Second Edition. The hands-free works like a charm, but the music over bluetooth is not.
Tried to apply the A2DP patch that I found on this forum and nothing happens. "Nothing" means there is no extra option in bluetooth settings (I expected something like "Wireless Audio").
I noticed that the .reg file make reference to bthutil.dll, which is not on my device. Is it possible to overcome this (like getting this lib from somewhere and copying it on the device)? I tried to look for software upgrades, but the only upgrade possible is buying a better PDA ;-|
A few people claimed they had got it working, so what am I missing? Any help is greatly appreciated.
Cheers
Maciej
Ok, I fixed it
Below is the answer for the others sake:
Somehow I managed to download the file: "Broadcom Corporation BT-PPC AV.cab". Sorry, I can't remember where from, I think I got the link from this website.
Once installed on the PDA everything went sweet. A new profile for wireless audio appeared and now my HT820 work fine.
Cheers
Maciej

Bluetooth Explorer creates PROBLEMS for TomTom!!!

Indeed clicking as much as one time on "Bluetooth Explorer" will cause TomTom not to function properly any more (maps/voices not found etc.).
I have learnt that the hard way!!!
Many members of this forum speculated that the Artemis SD card housing is somehow related to TT's maps to vanish.... NOT TRUE!!!
After a hard reset I have tested that TT was fully functional and I have (intentionally... just to find out) clicked on Bluetooth Explorer and BINGO the TT6.1 maps&voices are GONE!!!
If some of the forum experts would happen to read this and would feel like giving instructions to disable Bluetooth Explorer it would be very helpful.... this will surely avoid SEVERAL hard resets to many people.
I have read that one should go to Settings/Connections then select the FTP tab and uncheck "Enable Bluetooth Explorer" but this is not to be found on my ARTEMIS (P3300)... Let's see if somebody will find a moment to share his/her wisdom with the rookies and shed some lights on this annoying problem.
Cheers!
SiperX
On my Orbit you do the following to disable the Bluetooth Explorer
Settings / Connections / Bluetooth / FTP (tab)
Then select or de-select Bluetooth Explorer.
I appreciate your kind reply Patrick but as you can read in my thread this path (Settings / Connections / Bluetooth / FTP (tab)) is not available in the Artemis/HTC P3300.... Anybody else?
Do you have a comms manager? If so you can access the ftp option of the bluetooth settings from here.
TomTom and Bluetooth explorer both work on my xda orbit.
herghost, what version of TomTom are you running?
I m unable to have Bluetooth Explorer enabled on my Orbit, and get TomTom to find the maps. I am running ver 6.02
perfect, i wasnt able to make tomtom recognize maps on orbit(on universal it works w/o probs) i switched bt expl. off and it works. thx
Guys, there is no doubt. TT (mine is version 6.1) and BT Explorer are NOT going to work together! I am glad to hear that phsnake could get his orbit to resume TT functions.... And (also) I found out that my old rom (the one originally shipped with the P3300) had the path (Settings / Connections / Bluetooth / FTP) to disable BT Explorer (as Patrick_UK explained) ... but the one I am using now does not offer the chance to enable/disable BTE.... any registry master would be kind enough to offer his/her expertise to make this possible? I am not so keen on editing the REG unless I know exactly what has to be done
rom 1.28.0.0 wwe
rom date 11-06-06
radio 02.69.90
protocol 4.1.13.30
ext. rom PDAMobiz.com
SiperX:I'll try today to find reg solution, i cannot promise anything, but i'll do reg export with btexpl. switched on, then with switched off and compare reg.files. hopefully i'll find the right one key.
Phsnake, this sounds like a great idea! Thanks in advance!!! I really hope that you can succeed and give me support in this matter.
By the way where did you find the rom (ROM: DOPOD IPL: 1.25.0001 SPL:1.27.0000 GSM: 2.69.90 OS:1.28.0.0 WWE) you are running now? It sounds lke the right one for my T-Mobile Artemis.
so i compared the regs and diff follows:
Code:
[HKEY_CURRENT_USER\Software\HTC\BluetoothFolder]
"EnableClient"=dword:00000001
"HDEVICE"=dword:00031380
[HKEY_LOCAL_MACHINE\Drivers\Active\68]
"ClientInfo"=dword:00000000
"Hnd"=dword:00031380
"Key"="Drivers\\BlockDevice\\BTDisk"
"Name"="BTD1:"
i guess all U need 2 do is change "EnableClient" from 1 to 0. try it and let us know. (i can disable it thru bt settings). or remove above posted reg entries.
ROM:its standard dopod shipped(the latest one) should be on wm-gurus.com
Thanks man! The registry editing you suggested worked and the BT Expl. is now OFF and TT finds the maps again!!!
But the option to enable/disable the BT Expl. (via BT settings as you say) is still not available any chance you could send me a screenshot of your reg for both [HKEY_CURRENT_USER\Software\HTC\BluetoothFolder] and [HKEY_LOCAL_MACHINE\Drivers\Active\68]?
For your Dopod rom, could you please give me a precise link where I can download it? I could not find it at wm-gurus.com.
Thanks a lot
ftp.wm-gurus.com/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe
yes i know that wont allow u to switch off btexpl. thru bt control panel.
Here are regentries U requested, but i dont think it'll help. but try.
Thanks again!
BTW, the same file (ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe) was available at XDA too.... I have tested it a few weeks ago it and -being an AU (Australian rom) my sim (Dutch T-Mobile) did not get registered as the operator is apparently not quoted .... strange that you can use it in Scotland.
For regs I will see what I manage to put together and will let you know... Great (and prompt) support was very appreciated...
Hi again,
I have flashed once more the ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe onto my Artemis and I have (FINALLY) noticed that the SIM does register and I am able to use the phone (incoming & outgoing calls).
The only problem is that every time I reboot I get a notification from the "NETWORK WIZARD" which says "your current operator (20416) is not supported. You should obtain an update from your device vendor".... Any idea how I can get this nag off my back?
Thanks
try to check \windows\startup
I have deleted (& made a copy for backup) these 5 files:
netwiz.cpl
netwiz.dat
netwiz.exe
netwiz.exe.0404.mui
netwiz.ini
from the Windows folder of my Artemis.
After rebooting the Network Wizard notification does NO LONGER pops up!!!! So I would say "Problem solved", right?
I am glad that -thanks to the recent communications we exchanged- you "inspired" me to give one more try to the Dopod rom and I finally seem to have found what I wanted.
Only one final point: In other roms if you click on the phone signal bar you get the option to turn on/off the flight mode and if you click on the icon on the right of the phone signal bar you culd turn on/off the WiFi... in this rom you get a small (blue) Comm Manager link to follow in order to enable/disable these functions.... did you find any faster ways to activate WiFi or Flight mode? May be they can be added to the voice commands?
Cheers
u can use phonealarm-some skins supports one click wifi, gprs,btooth switch,
I saw phonealarm but I have decided to spend the end of the weekend configuring my newly installed rom (immediately after I will make a Sprite backup) and along the way try to think of something to keep to a minimum the amount of additional SW installed. What do you think if I use "tray launch", would that allow me to make the necessary shortcuts?
By the way (with previous roms) I kept my Artemis overclocked at 240 Mhz and it was pretty stable, did you test any higher frequency on the Dopod rom?

TomTomGo 300 & WM6

Hi Guys,
I've done some searching of this forum, and can't find anything relating to Tom Tom Go 300's here - so I figure it's safe to post this
I've upgraded to WM6, and everything works wonderfully, but for one thing...
I've a TomTomGo 300 Portable SatNav device, and it doesn't seem to want to work with WM6 - any reasons why? Anything I do to fix it?
When I try and pair the phone and the TTG, it finds the phone - but then comes up with something about there being no required services on the phone. Is this because we don't have DUN on WM6?
Any help/suggestions/abuse appreciated!
Ta!
Matt
http://forum.xda-developers.com/showthread.php?t=310411&highlight=tomtom+DUN
hope you get it running soon as you atleast need a TT to find your way '-)
Bah! I thought I'd seen it somewhere but couldn't for the life of me find it.
Will follow that thread then!
Thanks!
Matt
Which TomTom are you using?
Instead of starting a new thread, I'll keep using this regarding navigation options.
I have a Cingular 8525 with the VP3G LSVW rom. Since I've read other threads that the internal GPS chip in the TyTN is hopelessly disabled, I'm wondering what type of TomTom software + gps device is everyone else using? I'm thinking that there is something that can connect via BT or emu to my device that will provide the gps portion and then I can just install software.
Please post what you have and links to products would be even better!

today plugin bluetooth toggler

Hi,
I am look ing for a SIMPLE today plugin to fast switch on/off BT. I have tried a dozen but none of them seem to work. Strange. I used to have a HTC Universal (WM 6.1.) and there the BatteryStatus (name of the program) worked like a charm (even the last version homescreen_plusplus doesn't work on the rhodium) I tried exe versions (like BtOnOff.exe)and cabs (like BlueTogglerSetup). So I am starting to think I am missing sth. Anybody a suggestion?
Oh yeah, the indicators do switch on of these plugins (when i switch on BT trough settings-connections) so they detect the state of BT but are not able to switching on them selfs?
Help welcome!
thx in advance
greetz
Kjoere
(damn, i am missing my solid universal!)
Read the very first post in this forum! The very first paragraph. The search function works well ;-)
Pro2 use a different bluetooth stack than all previous models. Currently I have not seen other BT toggles that is working, but I expect they will come later.
I have CommManager assigned to the send button, so it is no big issue for me.
The biggest issue is, that the BT headset controls are hardcoded to WMP/HTCPlayer, so I can not use my favorite mediaplayer.
thx
thx, yeah I searched and read about the BT problems.
I just wanted to check in to see if there was sth new going on this front.
I hope you didn't mind too much.
In the mean time I assigned comm manager to a soft key in combination with 2 today screens it is feasable, but definitely not sth I want as a final result.
greetz,
Kjoere

Categories

Resources