Please forgive me if this has been answered anywhere on this board but I have diligently searched without an answer.
I understand there is a conflict with the BT stack that does not allow MSVC 1.6 on the TyTN (as well as other devices) to operate as intended through a BT earpiece but is this something that can be solved through one or more of the kitchen roms such as LSVW's? I am using this ROM and love it as it is extremely functional and stable. If only I could have MSVC 1.6 work as intended I would be able to move onto a softphone software that would work with my SPA9000 IP PBX while out of the office.
Thank you for all that can shed some light on this problem.
Here you go. I searched "bluetooth fix" and it came right up!
http://forum.xda-developers.com/showthread.php?p=1161666&highlight=bluetooth+fix#post1161666
allen363 said:
Please forgive me if this has been answered anywhere on this board but I have diligently searched without an answer.
I understand there is a conflict with the BT stack that does not allow MSVC 1.6 on the TyTN (as well as other devices) to operate as intended through a BT earpiece but is this something that can be solved through one or more of the kitchen roms such as LSVW's? I am using this ROM and love it as it is extremely functional and stable. If only I could have MSVC 1.6 work as intended I would be able to move onto a softphone software that would work with my SPA9000 IP PBX while out of the office.
Thank you for all that can shed some light on this problem.
Click to expand...
Click to collapse
WM6 does not fix anything in regards to BT audio.
The Hermes forum has a thread - MS Voicecommand 1.6, the fix is in that thread.
Most of the fix is in the Wiki under MS VC 1.6, but the actual mortscript is attached here - just rename it from .txt to .mortrun
I couldn't get the file to attach or paste in properly in the wiki - if anyone wants to fix???
The post above
is the correct fix for his issue. Jules solution contains a CAB file that works perfectly for the exact issue I was having.
pkley said:
WM6 does not fix anything in regards to BT audio.
The Hermes forum has a thread - MS Voicecommand 1.6, the fix is in that thread.
Most of the fix is in the Wiki under MS VC 1.6, but the actual mortscript is attached here - just rename it from .txt to .mortrun
I couldn't get the file to attach or paste in properly in the wiki - if anyone wants to fix???
Click to expand...
Click to collapse
Thanks to everyone who replied but I was not specific enough. I am using Jules' fix which works great but it doesn't solve to problem of caller id and other announcements being able to be routed through the bt headset. That's what I was referring to.
The only thing really working at the moment is getting voice dial to work through the headset..
Inbound callerID announcements are not and likely will not work. All patches I've seen do not address this issue as I believe it is an issue with the BT stack itself.
As for routing audio to your headset (other than Caller announcements) use Mortscript and the script I posted - it toggles between allowing MSVC and audio.
Related
Hello,
would be happy to exchange french cooking, but ROM cooking is, if I understand, what I need to do, if I wish to upgrade my SPV M2000 (Orange France).
Could someone help me understand and manage my ROM cooking?
My cooking 'chef' !
Would like to get a clear view, understanding, method, issues of what/how cooking is.
My first goal is to enhance the BT capabilities of my SPV: BT is working just with the SIM phone, I would like to be able to have audio capabilities for any sound capable applications (mp3 player, IP phone, other).
I heard about A2DP profile, is that a software to add? a registry keys to activate? is that included in a BT latest version?
Could someone help me on that?
I use IP phone extensively, wirelessly, with global roaming, will appreciate to share my experience on using this almost WW free calling feature.
Call me !
Jennyfer
Paris - France.
to get a2dp you need to get the broadcom bluetooth stack and do some regitry changes
mind you if you do switch to that bluetooth stack you loose the ability to use a bluetooth headset for phone
IP phone require a much bigger bandwidth then gprs can give so to use programs like skype and such you need to be on wifi otherwise they will only send text
cooking is really a left over from the way that xda1's worked
with later models people just unlock the extented rom and place the cab files they want in there
Thank you, Rudegar, for your prompt answer.
So, you say that "cooking" is from past, and that now the method with extended rom is selecting/using cab files?
Where can I get the broadcom bluetooth stack ?
(have ftp client to xda ftp site)
Which registry changes I have to do ?
Why BT A2DP imply to have phone call with Bt impossible ?
Is there a strategy to have both ?
So many questions, but am really new at that !
Thank you!
Jennyfer
http://forum.xda-developers.com/viewtopic.php?t=25443&highlight=a2dp
i link to the 2 threads about a2dp in this thread where you can download and see the registry settings which need changed
and i have both "a2dp" and headset on my xda2 because i use the i-Phono headset which kinda cheat with the a2do part using a dongle
and yes today people place programs they want autoinstalled in the extented rom and there is no way to place programs in the real rom like people could on xda1
Rudegar, you said: "and i have both "a2dp" and headset on my xda2 because i use the i-Phono headset which kinda cheat with the a2do part using a dongle"
This mean there is a way to keep headset profile along with A2DP profile ?
So your i-Phono headset works with both SIMphone and other audio applications?
What is a2dp part / dongle?
thanks for yor help!
Jennyfer
Rudegar,
the first link pointed to an unavailable file.
I got the Broadcomm BT 1.6.... from second link.
So, I just have to install CabInst (better tool?) on my BA? and install this cab from the BA?
Does I have to tweak registry?
I never did this and would not like to mess it !
Jennyfer
I found this audio gateway registry settings from MSDN/Dev, does it apply to 2003SE ?
http://msdn.microsoft.com/library/d...html/wce50conaudiogatewayregistrysettings.asp
It is like if BT is never totally activated (even on mobile 5.0), so perhaps these keys could wakeup some BT features?
http://forum.xda-developers.com/viewtopic.php?t=11729&postdays=0&postorder=asc&start=50
the reg changes are described here
about cab files then personaly i just double click on them when i wanted them to install manualy
but otherwise you dont need to do anything with them apart from copying the cab files into the extented rom dir and adding their name in the config.txt in the same dir
cannot find it while file-exploring my BA.
Where is located the "extended rom dir" on the Pocket PC ?
being newbie, if I well understand, I have to use the extended rom unlock tool to access extended rom dir ?
and then edit config.txt in \windows.
I put my cab here.
And then?
- system update it automatically?
- or does I have to soft? hard? reboot?
be explicit, please! afraid to break my system.
yes you have to unlock and unhide your extented rom using the program
no you have to hardreset in order for it to install the cab files
I could have started reading the BA wiki first ! I did.
My best advice to newbies (as I am) is to start by wiki.
So, if I well understand, I can change my langage, and everything, choosing, whichever ROM, Radio & so on on my Orange France originated SPV, and install, by example, English ROM 1.4, latest radio & BT ?
Has anyone got Widcom to work with A2DP and Headset profile?
I can get my Sonorix BT stereo headset connected to both profiles, however the headset one only partially works. Call answer doesnt work - although cancel call does. Wierd. Mp3's stream fine in WMP10 though via A2DP.
Has any one got MS Voice command to work on XDA Live... I can't get 1.5 to work and really don't want to spend more money to upgrade to 1.6 anyone know why it won't work. It gives Error at start up. Also does anyone know how to get the threaded sms off of my palm treo705 to put on my hermes?
chrisryn said:
Has any one got MS Voice command to work on XDA Live... I can't get 1.5 to work and really don't want to spend more money to upgrade to 1.6 anyone know why it won't work. It gives Error at start up. Also does anyone know how to get the threaded sms off of my palm treo705 to put on my hermes?
Click to expand...
Click to collapse
I had the same trouble with MS 1.5 in the AKU 3.3 upgrade and when I went to MS 1.6 it worked. MS 1.6 works fine in the XDA Live rom. I am afraid you may have to upgrade.
SK
I have installed it and It does activate VC but only through the device mic not through the headset. What is strange is that on my Wizard with WM6 VC1.6 worked perfectly straight away.
Can anyone post the Cyberon Voice Dial cab. I would like to try that with my Headset Thanks
Jules
Same here the headset doesn't work but thats no surprise really it NEVER works..
I have even tried the old hack and all it does is crash with an error..
VC 1.6 Required
As XDA-Live is a post AKU3 OS, you have to use VC 1.6 to have any of the capabilities. VC 1.5 only works up thru AKU2 ROMs.
I also am unable to get VC 1.6 to work with my headset, the XCSdM patch crashes on me (as mentioned in another post).
Dean
Cingular 8500
XDA-Live
Radio 1.35
Try This
Here everyone, this file got my bluetooth headset to work with VC 1.6 in Crossbow on my old wizard. Maybe it'll work for you, I haven't tried it on the Hermes.
Unfortunately, the hermes has something different in its MS bluetooth stack and that's why there are issues with MS VC..It is even listed on microsoft that there are issues with the bluetooth stack for hermes and a few other phones.
I tried the Widcomm stack and it seems to work well with MS VC and WM6 on the hermes, but be aware the Widcomm stack is still in developmental stages...so don't complain if you find issues with it...but it works for me
eagle 1 said:
Unfortunately, the hermes has something different in its MS bluetooth stack and that's why there are issues with MS VC..It is even listed on microsoft that there are issues with the bluetooth stack for hermes and a few other phones.
I tried the Widcomm stack and it seems to work well with MS VC and WM6 on the hermes, but be aware the Widcomm stack is still in developmental stages...so don't complain if you find issues with it...but it works for me
Click to expand...
Click to collapse
Can you activate VC through the headset though?
drbowden said:
As XDA-Live is a post AKU3 OS, you have to use VC 1.6 to have any of the capabilities. VC 1.5 only works up thru AKU2 ROMs.
I also am unable to get VC 1.6 to work with my headset, the XCSdM patch crashes on me (as mentioned in another post).
Dean
Cingular 8500
XDA-Live
Radio 1.35
Click to expand...
Click to collapse
I as well.... i guess it was a bad time to upgrade since i'm going on vacation tomorrow... oh well... atleast AD2P works great with WM6 and my SE 970
I installed VC1.6 and the BT Voice Command Hack by XCSdM
http://forum.xda-developers.com/showthread.php?t=283412
....my VC1.6 is working thru my Jawbone except for notifications......If I say "dial xxx-xxxx" it repeats the query back to me thru the jawbone!
8525 sim/cid unlock
XDALIVE w/ updates
Radio 1.34
Jawbone BT set
FU5 KONA said:
I installed VC1.6 and the BT Voice Command Hack by XCSdM
http://forum.xda-developers.com/showthread.php?t=283412
....my VC1.6 is working thru my Jawbone except for notifications......If I say "dial xxx-xxxx" it repeats the query back to me thru the jawbone!
8525 sim/cid unlock
XDALIVE w/ updates
Radio 1.34
Jawbone BT set
Click to expand...
Click to collapse
I have the .9f BT VC hack from xcsdm which isn't working...... i have never edit the registry before manually but willing to do it as it looks like the error of the program is that it isn't saving properly..... where can i find the values to change?
You shouldn't have to edit the registry with that fix. The fix is only for VC1.6, which is the only version of VC that is compatible with WM6. Think of it as when you updated to Windows 95, and your Windows 3.11 programs wouldn't all work - you're doing the same thing to your phone .
For the record, I'm running VC 1.6 on the Vanilla WM6 Rom, using the XCSdM patch only.
Heres my fix
Ok I got vc1.6 to sorta work the way I want it to. I upgraded to the widcomm stack and added the btfix hack listed in other thread. I can get vc1.6 to work with ptt button but not headset button. Hopefully this will be fixed with final development of widcomm. Haven't had a chance to check if all notifications come through bt or not.
I had to manually go in and ad a value to the reg in order to get the button on the BT to work as well as using the patch.....this is the setup.....
1. Install VC 1.6 (make sure it is in Main memory)
2. Download Bluetooth Voice Command 0.9f.cab
3. Download BTVoiceCommand.exe
4. Create the Folder \Program Files\Bluetooth Voice Command
5. Copy BTVoiceCommand.exe into this folder
6. Run .9f Hack
7. Go to newly created BT Voice Command config (in Programs) and tick off the check box "Enabled"
8. Set command duration to 30
9. Set or check that the following registry keys are set (I had to manually change Path to BTVoiceCommand.exe.)
10. HKLM\SOFTWARE\OEM\VoiceCommand\Path = "\Program Files\Bluetooth Voice Command\BTVoiceCommand.exe"
11. HKLM\SOFTWARE\OEM\VoiceCommand\VoiceCmdDuration = 30
12. HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\BTA GExtModule = "\Windows\btagext.dll"
a. (For reference: http://forum.xda-developers.com/show...=283412&page=7 )
13. *Go into the registry and set HKLM\SOFTWARE\OEM\VoiceCommand\ LaunchAPEnable to 1 (I wasn't sure if this was necessary...but it's working now)
14. Soft reset 8525
15. Delete Headset Pairing
16. Recreate Headset Pairing.
17. Set Side button to VoiceCommand
18. Reset Device
Thanks tp BKBrolier for posting this! The red section is what I had to manually add....once added I was flyin high!!!
Good news is coming
<WARNING: ELEVATED HOPES TO FOLLOW>
I have been working diligently on getting VC to actually WORK. The reg edits above will work with the 0.9f patch.
I am creating an new version of the BTAGEXT.DLL file that will work with VC the way it was intended. I'm getting close, but I'm hitting a couple difficult areas, so I'm not giving any ETA yet.
However, WHEN I'm finished, EVERYTHING will work as intended, commands, notifications... you name it. even caller id
XCSdM
Bravo, xcsdm! Look forward to the update. I have to be sure M$ VC 1.6 will work before I go to WM6.
Ben
VC 1.6 & WM6 Announce Incomming Calls
Thanks for all the efforts working to get VC 1.6 working through BT headsets. I am awaiting my new headset Plantronics 665. However, I have installed VC 1.6 and mainly want to use it for incoming voice notification of person ringing. This always worked out of the box before. I have ticked all the right boxes under settings (Ticked) Speak notifications through device speaker or wired headset only and (Ticked) Announce incomming calls.
The phone rings, vibrates but not VC announcements of incoming call. Thanks for taking the time to read and any ideas/suggestions welcome. Worked perfectly, well most of the time under 1.5?
Tom (Blackburn UK)
xcsdm BT VC 1.6 hack
I don't even get the shortcut in programs and btvoicecommand if I click it it just starts voice command.
xcsdm said:
<WARNING: ELEVATED HOPES TO FOLLOW>
I have been working diligently on getting VC to actually WORK. The reg edits above will work with the 0.9f patch.
I am creating an new version of the BTAGEXT.DLL file that will work with VC the way it was intended. I'm getting close, but I'm hitting a couple difficult areas, so I'm not giving any ETA yet.
However, WHEN I'm finished, EVERYTHING will work as intended, commands, notifications... you name it. even caller id
XCSdM
Click to expand...
Click to collapse
Thanks for the patch working good so far. Let me know when you get the new btagext.dll done i'll test it for you if need be. Keep up good work.
You are my hero man!!!
MS Voice Command is proving to be a real PIA to embedd into the Rom but We're probably better of not doing that anyway as tere are many who don't user or want it (yeah I know) and even a few who prefer Cyberon's Version....
xcsdm said:
<WARNING: ELEVATED HOPES TO FOLLOW>
I have been working diligently on getting VC to actually WORK. The reg edits above will work with the 0.9f patch.
I am creating an new version of the BTAGEXT.DLL file that will work with VC the way it was intended. I'm getting close, but I'm hitting a couple difficult areas, so I'm not giving any ETA yet.
However, WHEN I'm finished, EVERYTHING will work as intended, commands, notifications... you name it. even caller id
XCSdM
Click to expand...
Click to collapse
I've heard about a bunch of new roms (the BLACK and LVSW) that have somehow cleared up that nasty A2DP bug in the Microsoft BT stack that caused certain headsets to buzz and hiss with certain frequencies.
I'm wondering if anyone here knows how that works, what has changed in these new Roms? Are they updated bluetooth drivers from MS?
I'm wondering if we can't put together a new a2dp patch for other devices so that additional phones can benefit as well, without getting a whole new rom (similar to the way the initial Tornado A2DP patch was circulated around).
Anyone have any info?
Can anyone even verify that this is true? (I don't have a hermes, but I do have an i.tech R35 headset with horrible distortion from any windows Mobile device playing music... I'm just assuming what I've heard is true about new roms fixing it...)
The only change is to some registry entries, the HTCustom tool should work on most any phone. Black's config tool should work but sometimes crashes on other roms when you try to save.
I have got the same problem with my iTech. I think it is something related to the design of the bluetooth headset. Is anyone experiencing the same problem with a solution?
nope maybe your release is a bad bath?
My Hermes with the Black ROM works fine with my Jabra BT620s. Hands-free mode works flawlessly too.
porkchop83 said:
nope maybe your release is a bad bath?
Click to expand...
Click to collapse
No no no, this is KNOWN issue with the MS stack and certain Bluetooth headsets, including the R35.
Its not the headset.
Proof is that when paired with another device, IE a nokia, or PC running bluesoleil, it works just fine- no hissing, very good audio quality.
Also, tested on a Wizard using the Widcomm stack instead of the MS stack, and sure enough it works GREAT!
So, its clearly a problem with the MS Windows Mobile stack, and in fact it has been discussed in various forums here.
Shadowmite, are you sure its just registry changes?
Is there any way to find out what they are?
Dishe said:
No no no, this is KNOWN issue with the MS stack and certain Bluetooth headsets, including the R35.
Its not the headset.
Click to expand...
Click to collapse
Correct. I had that problem with my Vodafone V1640 (HTC Universal). Kind of solved that problem using the Widcomm stack patch uploaded by someone here. Go search for it.
richardlai said:
Correct. I had that problem with my Vodafone V1640 (HTC Universal). Kind of solved that problem using the Widcomm stack patch uploaded by someone here. Go search for it.
Click to expand...
Click to collapse
Yes, I mentioned that I had it working with the Widcomm stack on a Wizard, but I'd rather have a working MS stack for various reasons including the Widcomm stack's instability on certain devices, and more importantly, its not available on the Tornado and Vox (or any smartphone), which is my device of choice at the moment!
So, once again, does anyone know what these new roms do to "fix" the problem?
Its gotta be something I can re-create...
Dishe said:
Yes, I mentioned that I had it working with the Widcomm stack on a Wizard
Click to expand...
Click to collapse
Sorry, I missed that part.
I didn't notice that Bluetooth performs differently in custom ROMs on the same hardware. If it is true, the ROM creators would know what they have done. Try contacting them directly if no one else here knows.
I just tried several Wm6 roms on both my Trinity and Hermes. It seems all the new RTM roms now work correctly with the earpiece speaker using VOIP on the Hermes, this is using CUSTEL VOIP.cab and/or built in VOIP in the various Hermes RTM roms. However on the Trinity we get no sound alot of times, and when we do it sounds on the back speaker and doesnt work with bluetooth unlike the hermes. ANyone know why this is?
mcq3000 said:
I just tried several Wm6 roms on both my Trinity and Hermes. It seems all the new RTM roms now work correctly with the earpiece speaker using VOIP on the Hermes, this is using CUSTEL VOIP.cab and/or built in VOIP in the various Hermes RTM roms. However on the Trinity we get no sound alot of times, and when we do it sounds on the back speaker and doesnt work with bluetooth unlike the hermes. ANyone know why this is?
Click to expand...
Click to collapse
not sure... how about asking on the trinity forums instead of the hermes forums ???
Both Hermes and Trinity are amongst the supported devices in AGEphone Mobile 2.5 Speakerphone Edition! Forget about the crappy internal client and use a real softphone
VOIP Blutooth Hermes
I got a Herme's and i Just got VOIP to work. (SIP, Vbuzzer)
but when i dial out with it, i dont have any sound comming through my Bluethooth headset
(Blacks 3.1 rom)
To make your BT-headset work with the current version of AGEphone, please follow the following instructions:
There is no official support for Bluetooth Headsets yet, but you can make most of them work with AGEphone using a little hack. There is no need to change the audio device in AGEphone for this at the moment. You only have to use a little tool called "BTAudioToggle.exe". For further information about this utility please refer to this thread. The package you can download there contains "BTAudioOn.exe" / "BTAudioOff.exe", but using "BTAudioToggle.exe" does the job just fine. Once you have downloaded the utility please go to "Settings - Other" and give AGEphone the path to the "BTAudioToggle.exe" file there for "Execute on Connect" and "Execute on Disc." without any further parameters. If your BT headset is paired properly with your phone AGEphone will automatically switch output and input to the device whenever you accept a call. It's probably of note that BTAudioToggle.exe only works with the Microsoft Bluetooth Stack.
This allows you to use the headset not only with AGEphone Mobile but any other program. I hope it helps!
hi all,
i'm having issues with my agephone mobile 2.64. i'm connecting it with gizmo5 and grandcentral and my hermes.
i call grandcentral, agephone shows that it has a call (no sound), i accept (still no sound), press one (cause i know i need to press 1), then the call connects.
but there is no audio in both ends, i can't hear the other side and i can't talk to the other side.
any one know if a way to fix this?
Earpiece workig ?
The new version is here:
[APP][FREE] audioRoute 1.2.010 for VoIP
http://forum.xda-developers.com/showthread.php?t=495166
Since HTC loves to give the community sleepless nights with duzent of troubleshootings, here a new task.
The TP2 has a Broadcom BT Stack installed... Okay a nice UI in comparison with the default Microsoft one.
BUT: I realy miss the PTT function.
Normaly you can create a shortcut inside the windows dir called SHORT_PTT.lnk or LONG_PTT.lnk for binding tasks to the PTT.
Or when You install MS VC you can access Programs or dial numbers via voice.
It could be that you have to change some values in the registry...
for example HKLM\SOFTWARE\OEM\VoiceCommand string "Path" to "\Programme\Voice Command\VoiceCMD.exe"
I own a Jabra BT8040 and I realy love it... but without the PTT function it nearly gets useless if i have to pull out the Phone to make a call or look for my upcoming tasks. The reason why i'm buying a BT - Headset is to keep the Phone inside the case.
I now read about a "Maybe" solution I havent tested right now.
read more here
It will be enought if I'm able to bind the Ptt button on my headset to any Programm or Mortscript by holding or tap. (The double Tap feature to redial still works).
I allready called HTC for more Support but the "Hotline Guy" who btw wasn't that able to understand german language doesn't realy understood that the fact is not that MS VC doesn't work correctly but that the PTT function is disabled completly.
So all you junks like me out there let's get a workaround on that.
What's your value of the following registry:
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand\VoiceCmdEnable
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway\BTAGEXTModule
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand\VoiceCmdEnable
value="1"
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway\BTAGEXTModule
value="\Windows\btagext.dll"
after my last tryed fix ^^
I now reinstalled MS VC and my new Values are:
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand\VoiceCmdEnable
value="1"
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\AudioGateway\BTAGEXTModule
value="\Programme\Voice Commander\vcbthag.dll"
but both doesn't work
how about uninstall MSVC and try Cyberon VC?
If still not working, make a full backup and put this dll to \Windows and change this in registry:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Au dioGateway\BTAGEXTModule
value="\Windows\OEMAGW.dll"
Soft reset and try again.
cyberon VC
I haven't found Cyberon VC supporting german language yet.
But Cyberon VC doesn't work eighter...
haven't tried the dll yet but but is useless if only english is supported.
Thanks for your replys
Hope it isn't true but it looks like (i have read it sommewhere on the web) voice composing over BTh wasn't possible due to the Widcom Stack. Having tryed many things and tweaks, nothing.
It is a big mistake from HTC to have not implemanted Voice command over BTh in thus a pro supposed device !
Schmurtz1968 said:
Hope it isn't true but it looks like (i have read it sommewhere on the web) voice composing over BTh wasn't possible due to the Widcom Stack. Having tryed many things and tweaks, nothing.
It is a big mistake from HTC to have not implemanted Voice command over BTh in thus a pro supposed device !
Click to expand...
Click to collapse
No, VC over BT did work on my P525 which use Widcom stack as well. It's probably HTC's engineer NEVER got BT working right
Widcomm Stack
That your BTH worked on your other device doesn't mean that it works on the Touch Pro 2 ... bet your device has an other version of the stack.
Looks like the PTT function is reserved for Broadcom or Widcomm devices only.
Or is totaly out of ordern...
This is a realy BIG MISTAKE from HTC... hope they change this in the next Roms.
I'm still in Mail contact with HTC about this.
Let you know if something changes...
I just got my tp2 today, saw it had a BC stack and I knew they messed something up.
PTT & BT headset is like the only thing I actually need BT wise and they broke it, on a pro phone. I guess every (legal) in-car user will be very disappointed about this, considering this should be a "pro" phone.
I can confirm PTT doesn't work with Cyberion Voice Speed Dial nor MSVC. Also, the usual registry settings HKLM\SOFTWARE\Microsoft\Bluetooth are there, but changing them doesn't seem to have any impact as the BC stack should(!) handle them. I had a quick look through the widcomm stack settings in the registry but couldn't find any obvious settings for PTT
Something weird:
If I don´t set up a data connection to my carrier, the link to my bluetooth car kit works perfectly, meaning that I can answer calls and hang up using the button on the steering wheel.
Once I set up a connection, I can only answer and hangup using the buttons on the telephone. I any case I can listen and talk using the car kit.
Any ideas of how to solve this puzzle?
Edit: new finding: If set up a connection but data connection is off, everything works fine. When data connetion is on, then it doesn´t work.
Any Ideas?