I upgraded Qtek 2020 to WIN 2005 (ROM 1.50f) and everything worked fine.
Then I downgraded to version 2.20. Installation went normal, but after the installation and hard reset, the Qutek didn't run, but just writes the next text:
Device authentication failure. Please contact the product manufacturer. For reference, please provide your device ID.
6000222100391951 38000050bf3f5173
When I reset it, it stil writes that the operating system is still 1.50f.
I tried with another qutek to downgrade, but the the computer doesn't recognize my Qutek.
Can somebody help me with this, how should I solve this problem.
I also tried with next procedure:
1 Power Button
2 Record Button
3 Camera Button
4 Soft-reset Button with Stylus
etc. etc.
PC becomes aware of Qutek, but the installation doesn't work.
Is there any possibility to perform hard hard reset, so that it would be withouth any operating system. That it would be completly clean.
I need win 2005 for i-mate pocket pc or xda ii or qtek 2020
I need win 2005 for i-mate pocket pc or xda ii or qtek 2020 PLZ help Me
Related
upgraded Qtek 2020 to WIN 2005 (ROM 1.50f) and everything worked fine.
Then I downgraded to version 2.20. Installation went normal, but after the installation and hard reset, the Qutek didn't run, but just writes the next text:
Device authentication failure. Please contact the product manufacturer. For reference, please provide your device ID.
3065782000381951 38000050bf3f5173
When I reset it, it stil writes that the operating system is still 1.50f.
I tried with another qutek to downgrade, but the the computer doesn't recognize my Qutek.
Can somebody help me with this, how should I solve this problem.
I also tried with next procedure:
1 Power Button
2 Record Button
3 Camera Button
4 Soft-reset Button with Stylus
etc. etc.
PC becomes aware of Qutek, but the installation doesn't work.
Is there any possibility to perform hard hard reset, so that it would be withouth any operating system. That it would be completly clean.
upgraded Qtek 2020 to WIN 2005 (ROM 1.50f) and everything worked fine.
Then I downgraded to version 2.20. Installation went normal, but after the installation and hard reset, the Qutek didn't run, but just writes the next text:
Device authentication failure. Please contact the product manufacturer. For reference, please provide your device ID.
6000222100391951 38000050bf3f5173
When I reset it, it stil writes that the operating system is still 1.50f.
I tried with another qutek to downgrade, but the the computer doesn't recognize my Qutek.
Can somebody help me with this, how should I solve this problem.
I also tried with next procedure:
1 Power Button
2 Record Button
3 Camera Button
4 Soft-reset Button with Stylus
etc. etc.
PC becomes aware of Qutek, but the installation doesn't work.
Is there any possibility to perform hard hard reset, so that it would be withouth any operating system. That it would be completly clean.
Hello all!
I've purchased O2 XDA Zinc in Arabian. I'm living in Russia now.
When I open the box, get the PDA and turn them on I've got screen like this:
mars II eboot ver......
h/w version v1.4
******** usb loader ***********
diskonchip g4 128mb
start downloading image...
please plug-in usb cable...
And that's all... Now I can't go to Arabian to change my PDA and there is no service center that can fix it in Russia
I tried soft and hard reset and no effect.
When I connect PDA to PC the new hardware "Asus USB sync" appear in system, but Active Sync does not recognise them (I have 4.5 version).
All o2 zinc upgrade software are working with active sync and available os and i can't use them.
I've extracted binary filles from update exe, larger of it i've rename to MarsII_G4.ABI and put it on SD. But after insterting card and restarting nothing happens.
I also have some knowledge of elelectronic.
So, please help, how can I fix my PDA?
Thank you in advise!
ok fer
find another ppc first
find a dos app and rename it to devicespy.exe and make it readonly
transfer it to windows directory of other ppc and plug it to pc via mini usb and activesync 4.5
download and run any zinc rom from seeo2
if you did it well the upgrade software cant recognize the device type so continue update progres until your ppc get reset.
replace that ppc with your zinc and update will continue to end and your zinc will be fin.
choose any lang you wish.
You'd better visit www.seeO2.com
and register with your IMEI.
Then you can download WM5 or WM6 official rom.
Hope this can help
Yeaaa!!
It's really working!!
Thank you!
I've recovered my device by using this method.
O2 XDA Zinc. Please, help
Hi where can I get dos app file??
hi all......
i do really need help for reviving my dead o2 zinc.
it is suddenly dead wen connected to notebook via activesync.
yes.. it is SUDDENLY DEAD.
i'm doing nothing.
i have been trying to entering bootloader (by pressing right d-pad plus soft reset), but the bootloader doesn't show up.
doing hard reset, but nothing happen. still dead.
one thing that works is...
there is blinking orange LED when i connected zinc with wall charger (without battery inserted)
and there is orange LED (showing up about 3-5 secs) when i connected zinc with wall charger (with battery inserted)
anyone can help me solving this?
how bout using mtty?
anyone knows?
I recently tried to upgrade the version of windows on my ipaq hx2410.
However, I used the wrong upgrade and now my ipaq won't start. if the AC charger is plugged in i can get the white screen. i can also get the formatting ps screen and the USB screen.
My ipaq has the pre-BL: 1.00.04 screen and in the left bottom corner says USB, but my computer won't install anything on it and I can't connect to it.
Is there anything I can do?
phil82 said:
I recently tried to upgrade the version of windows on my ipaq hx2410.
However, I used the wrong upgrade and now my ipaq won't start. if the AC charger is plugged in i can get the white screen. i can also get the formatting ps screen and the USB screen.
My ipaq has the pre-BL: 1.00.04 screen and in the left bottom corner says USB, but my computer won't install anything on it and I can't connect to it.
Is there anything I can do?
Click to expand...
Click to collapse
which OS do You use - XP / Vista?
what update file was used?
did update completed (100%)?
hi spiaatie please help me ¡¡
Spiaatie said:
which OS do You use - XP / Vista?
what update file was used?
did update completed (100%)?
Click to expand...
Click to collapse
HHOLA AMIGO ESPERO ME HELP YOU CAN TRY A FEW DAYS AGO TO UPDATE MY SYSTEM IS A WM2003 WM 6.5 and everything was perfect But when the BAR END LOAD AND LONGER STAYS LEI NOTHING HAPPENS OTHERWISE YOUR MESSAGE TO BE FIRST UPDATE 2003 A 5 and then to 6.5 I have searched WM2003 ROM SPA BUT NOT IN THE ACHIEVEMENT OF YOU'LL FIND YOU AND ME IF YOU WERE SO GENTLE THE COULD HAPPEN TO BE ABLE TO MAKE MUST BE UPDATED AS
THANK YOU IN ADVANCE OF CARE
THANKS
Same problem
i have " HP IPAQ hx2410 " with WM2003 CE 1.10.0 and i upgraded with this window 5.2 it upgraded successfully but i m stuck on the first loading screen. its stuck when loading complete i have tried every thing such as boot-loader thing and also cant downgrade it . . . so kindly plzzz any one tell me how can i go to my initial state on wm2003 ASAP. plzzzzz heeeeellllpppppppp same position as above bro says
Hello, I'm Frank, and I'm a little bit newbie in the PPC world XD, I have an Hx2410 that was disconnected at approx. 60% of the flashing procedure, now I cannot update it anymore. I tried to restore WM2003 (I had WM2005 anyway) but the update stops at 0.1% then, the iPAQ restarts and freezes. I have to remove the battery to reboot to Pre-BL mode. When trying any different update, the RUU shows that my iPAQ's SKU is invalid, so he won't let me update my rom.
So, I tried with the universal bootloader (sourceforge.net/projects/ubl/) and when I select the rom file, but, the program stops at : "Status: Flashing rom to your device.. 0% Complete.".
I tried to connect to the iPAQ with mtty. I have the USB option (so my iPAQ is recognized by the computer) but there is a problem : I don't have the USB or CMD prompt when I push Enter key... I can't do anything.
The window is white and the cursor is blinking
What can I do?
Thanks in advance
You should search before making a new thread!
Yesterday user Chameo in hx2000 WM6.5 thread wrote how to update iPAQ if it's disconnected in flashing process.
Chameo said:
I've found a solution to my bricked HX2410!
Instead of changing the ROM file before pressing the UPDATE button, I changed the iPAQ! I've started the update tool (RUU) with my second working iPAQ connected and after the device recognition finished I changed the working iPAQ with the bricked iPAQ. After pressing the UPDATE button the ROM was flashed normally.
Hope this could help anyone else in a similar situation.
Click to expand...
Click to collapse
So, you need another iPAQ to bring your hx2410 back to live.
And mtty / universal bootloader is only for hTC devices, hx2000 series iPAQs are made by LGE.
Hi Spiaatie, I've searched all the forum, and tried all of the solutions given, but none of them worked for me, I've already seen that post, but unfortunately, I don't have any hx2410 nor any hx2XXX ipaq at hand, because hx2000 series are very rare to find here, I'm in Argentina, my ipaq it's from outside of my country, it's from US, I guess. And I've read in the official page (h**p://sourceforge.net/projects/ubl/) and forum (h**p://forum.brighthand.com/ipaq-hx4700-series/243984-universal-bootloader-tool-flash-any-valid-rom-any-ipaq.html) that the Universal bootloader tool is for any ipaq...so that's why I mention it..