I recently tried to upgrade the version of windows on my ipaq hx2410.
However, I used the wrong upgrade and now my ipaq won't start. if the AC charger is plugged in i can get the white screen. i can also get the formatting ps screen and the USB screen.
My ipaq has the pre-BL: 1.00.04 screen and in the left bottom corner says USB, but my computer won't install anything on it and I can't connect to it.
Is there anything I can do?
phil82 said:
I recently tried to upgrade the version of windows on my ipaq hx2410.
However, I used the wrong upgrade and now my ipaq won't start. if the AC charger is plugged in i can get the white screen. i can also get the formatting ps screen and the USB screen.
My ipaq has the pre-BL: 1.00.04 screen and in the left bottom corner says USB, but my computer won't install anything on it and I can't connect to it.
Is there anything I can do?
Click to expand...
Click to collapse
which OS do You use - XP / Vista?
what update file was used?
did update completed (100%)?
hi spiaatie please help me ¡¡
Spiaatie said:
which OS do You use - XP / Vista?
what update file was used?
did update completed (100%)?
Click to expand...
Click to collapse
HHOLA AMIGO ESPERO ME HELP YOU CAN TRY A FEW DAYS AGO TO UPDATE MY SYSTEM IS A WM2003 WM 6.5 and everything was perfect But when the BAR END LOAD AND LONGER STAYS LEI NOTHING HAPPENS OTHERWISE YOUR MESSAGE TO BE FIRST UPDATE 2003 A 5 and then to 6.5 I have searched WM2003 ROM SPA BUT NOT IN THE ACHIEVEMENT OF YOU'LL FIND YOU AND ME IF YOU WERE SO GENTLE THE COULD HAPPEN TO BE ABLE TO MAKE MUST BE UPDATED AS
THANK YOU IN ADVANCE OF CARE
THANKS
Same problem
i have " HP IPAQ hx2410 " with WM2003 CE 1.10.0 and i upgraded with this window 5.2 it upgraded successfully but i m stuck on the first loading screen. its stuck when loading complete i have tried every thing such as boot-loader thing and also cant downgrade it . . . so kindly plzzz any one tell me how can i go to my initial state on wm2003 ASAP. plzzzzz heeeeellllpppppppp same position as above bro says
Related
Hi, i tried to upgrade firmware on my hp 4700 to WM5. the ipaq rom update 2.02.14 started and after selecting the rom update file the 4700 reset and shortly after came back with ERROR 503: Active Sync Error. I have hard re-set a couple of times but the only thing that appears on the 4700 screen now is HP invent logo in centre with v1.01 at bottom. Undocked it displays "Serial" at top of screen and docked it shows "USB" Have i turned it into a paper weight or is this recoverable. Upgrade was tried on Vista with windows mobile 6 - but have also tried on xp with active sync 4.5
i have tried loading earlier versions on firmware but it doesn't get past the activesync error.
Any help greatly apprciated.
If anyone can help i have a hp ipaq h2200 and i tryed to do a bios update but now it`s stuck the onley thing that shows me is a image with hp,usb and v1.08 can anyone help me please?is there any way i can make it work again?is there any ROM for this kind of device maybe a wm5 or wm6?
no one can help me?
Profy_X said:
If anyone can help i have a hp ipaq h2200 and i tryed to do a bios update but now it`s stuck the onley thing that shows me is a image with hp,usb and v1.08 can anyone help me please?is there any way i can make it work again?is there any ROM for this kind of device maybe a wm5 or wm6?
Click to expand...
Click to collapse
go boot loader mode before upgrade
but how do i do this?it isn`t in bootloader?(it shows a hp image up shows usb and down v1,08)
...
First important question: what upgrade did you try to do?
For iPAQ h2200 there is no cooked ROMs: WM5 or WM6x. This device can work only under branded WM2003se.
If you tried to do upgrade to any of cooked ROM like WM6.0 from different device like hx22xx by mistake, please try the following:
1. Go to HP www page and download the last available ROM upgrade (I assume English ROM)
2. Turn on iPAQ (don't carry the device doesn't boot properly) and place it to the cradle which should be connected to PC which has installed active sync software (please don't carry about lack of connection seen on active sync).
3. Run the ROM upgrade.
If you tried the HP upgrade and it stuck - just repeat them with the way described above.
Important - do not use blue tooth connection during flash !!! Only USB !!!
Good luck.
If it doesn't help I believe there is hundred of similar cases described in forums - try to search the solution there
bigu1975 said:
This device can work only under branded WM2003se.
Click to expand...
Click to collapse
More precisely: WM2003 only - no SE upgrades for the h2210.
i upgraded the v1.10 original ROM from HP home site but now i solved the problem with mtty and ultra edith but now i have a nother problem i flashed again the ROM but its stuck on the loggin bar from startup it just fill the bar but windows doesn`t start i tryed again to flash and the problem still persist any sollutions?
Profy_X said:
i flashed again the ROM but its stuck on the loggin bar from startup it just fill the bar but windows doesn`t start i tryed again to flash and the problem still persist any sollutions?
Click to expand...
Click to collapse
As I understand you correctly - you restored your iPAQ into live using the last available ROM from HP site, which is WM2003 (thank you Menneisyys). The iPAQ worked fine and then you was trying to make another ROM upgrade - which ROM did you use?
I am asking because the ROM in version 1.10 is the most actual one and there is no any other ROM for this device. I assume that source of your problem is you are trying to use incorrect ROM. Correct me if I am wrong... If this is true - the solution is to restore your device into operational using the way as you did it before and stop to flashing your device - there is no another ROM to your iPAQ
the v1.10 but the problem is that after i flash the wm doesn`t start it just stay there stuck on the startup and i reflashed the device but still doesn`t start
how did u fix the stucked screen while booting? im searching for solutions for 30 mins now, but dind't find a way...
please help somebody..
ok, for those with "same" problems like me:
i have windows 7 64bit. the rom flashing wasn't successfull on this machine. i did the same on my notebook with windows xp and it worked. before it said that it couldn't find my ppc. on the notebook it wasn't a problem.
i had these installation notes found anywhere:
1.) Go to the Vendor Website, and...
2.) Select the appropriate hyperlink for your model.
3.) Download the most recent BIOS version.
4.) Press the POWER + iTASK + CONTACTS + RESET buttons at the same time so as to enter the FLASH Mode
5.) Make sure your USB connection to the Cradle is hooked-up.
6.) Place your PDA in the USB Cradle.
7.) Stop the MS ActiveSync session on your HOST PC: CTRL-ALT-DELETE > TASK MANAGER > PROCESSES.
8.) Highlight WESCOMM.EXE and select "End Process" button.
9.) Run the file you downloaded from your Vendor in step 3.
10.) The PDA should now begin Flashing the iPAQ's ROM BIOS.
i ignored step 4.)
hope that it helped somebody
Hi I'm a new user and just got my hx4700 2nd hand and need some help flashing the hx4700 to wm6.1 Its wm5 right now. First I tried the normal way of flashing but when I couldn't get the ipaq to sync with the comp. I installed activesync but when I connected the cradle and ipaq nothing happens, only a new hardware found asking for software to install "Hp rndis sync". I tried installing automatically with the cd in the drive but it couldn't find any software and i couldn't get the ipaq to connect to the desktop.
So I tried using the SD card to flash the ipaq instead. I tried using both the SD_IMG program and All Image to copy the rom onto the SD card but when I go into bootloader mode all it showed was the HP logo, the version at the bottom, and the text Serial at the top. Nothing else happened.
Someone help please. I'd really wanted to get it to wm6.1 asap. Thanks in advance.
Ah solved the problem. I was using the cd that came with the ipaq. Tried the wm5 upgrade CD and it updated activesync to 4.1 and now activesync works fine. Am flashing to wm6.1 as I'm typing this Can't wait.
Btw should I be seeing anything while the files upload to the ipaq?
Ok now I'm faced with another problem. The moment the files are supposed to upload to the ipaq, and the small little window that comes out and say files should start uploading or something like that, the window behind which is supposed to have some text, hangs with only a letter 'P' and turns "not responding" I tried a soft reset and nothing was flashed yet.
I tried the GUI version of the bootloader and it seems its stucked at 0% complete forever. Doesn't hang like the non GUI version, but still doesn't start flashing either.
Hi all, i just bought my HTC diamond today and it came with the spl 1.93.00.. I tried upgrading to the signed and unsigned versions of Olinex 1.93 hard spl..... But the process starts but the progress bar is stuck at 0% and is not moving.... Can someone please help me out.
Hi 1onew0lf,
I have very similar problem, spent the whole day trying to update to Hard-SPL
I have a MDA Compact IV - T-Mobile (German) version of Diamond.
The original SPL, if I go to a boot loader mode, shows:
DIAM200 64M
SPL-1.93.0000
MicroP-Diam (LED) v11
PSOC-Vict STAGE_PVT v0x20
Click to expand...
Click to collapse
Original ROM Versions are:
ROM-Version: 1.93.111.2 GER
ROM-Date: 09/24/08
Radio-Version: 1.00.25.16
Protocol-Version: 52.29a.25.13U
Click to expand...
Click to collapse
When I try to run ROMUpdateUtility.exe after answering "Yes" (Ja) on the screen of Diamond on the request to place the enterbootloader.exe into \Windows directory the device goes black screen and never comes back.
After 1-2 min. the ROMUpdateUtility.exe utility gives an Error 260: CONNECTION and informs that USB is disconnected, the Active Sync is already long time grayed out.
I tried a trick described in the pinned forum to run SSPL manually: I copied SSPL-Manual.exe into a Temp folder on the device and launched it from Diamond with the same effect: black screen till I do a soft reset of device. I have found somewhere a tip to update the .NET CF to the latest version, and I did so have now .NET CF 3.5 on the device, it didn't solve the problem.
So I may assume that device somehow is not able to switch to SSPL mode, but nobody speaks of such problems!
Looking for anyone who may help us to solve this problem!
Thanks in advance!
yepiee! I actually did it! I managed to update to Hard-SPL
So, first of all the black screen IS actually the SSPL mode of device. My only problem was that USB drivers were not automatically configured. I'm not sure is it a problem with Windows XP SP3, or I messed up some settings for USB devices long time ago.
So what I did is before starting ROMUpdateUtility.exe I opened the Windows Device Manager and placed at the background. Then started the regular procedure of updating to Hard-SPL.
At the moment the screen of the device turned to black a new USB device appeared in the Device Manager, but with exclamation sing giving me a hint that no proper driver found/configured automatically.
Right click -> Update driver... -> Search for suitable driver - did a trick for me. I picked up a second driver from the list of choices with number 32 instead of 16. After the driver was successfully installed the update continued and eventually ended with congratulation message about successful update!
I hope my experience may help someone as well.
endlessspace said:
yepiee! I actually did it! I managed to update to Hard-SPL
So, first of all the black screen IS actually the SSPL mode of device. My only problem was that USB drivers were not automatically configured. I'm not sure is it a problem with Windows XP SP3, or I messed up some settings for USB devices long time ago.
So what I did is before starting ROMUpdateUtility.exe I opened the Windows Device Manager and placed at the background. Then started the regular procedure of updating to Hard-SPL.
At the moment the screen of the device turned to black a new USB device appeared in the Device Manager, but with exclamation sing giving me a hint that no proper driver found/configured automatically.
Right click -> Update driver... -> Search for suitable driver - did a trick for me. I picked up a second driver from the list of choices with number 32 instead of 16. After the driver was successfully installed the update continued and eventually ended with congratulation message about successful update!
I hope my experience may help someone as well.
Click to expand...
Click to collapse
Thx, your hint was very helpful!
Hello, I'm Frank, and I'm a little bit newbie in the PPC world XD, I have an Hx2410 that was disconnected at approx. 60% of the flashing procedure, now I cannot update it anymore. I tried to restore WM2003 (I had WM2005 anyway) but the update stops at 0.1% then, the iPAQ restarts and freezes. I have to remove the battery to reboot to Pre-BL mode. When trying any different update, the RUU shows that my iPAQ's SKU is invalid, so he won't let me update my rom.
So, I tried with the universal bootloader (sourceforge.net/projects/ubl/) and when I select the rom file, but, the program stops at : "Status: Flashing rom to your device.. 0% Complete.".
I tried to connect to the iPAQ with mtty. I have the USB option (so my iPAQ is recognized by the computer) but there is a problem : I don't have the USB or CMD prompt when I push Enter key... I can't do anything.
The window is white and the cursor is blinking
What can I do?
Thanks in advance
You should search before making a new thread!
Yesterday user Chameo in hx2000 WM6.5 thread wrote how to update iPAQ if it's disconnected in flashing process.
Chameo said:
I've found a solution to my bricked HX2410!
Instead of changing the ROM file before pressing the UPDATE button, I changed the iPAQ! I've started the update tool (RUU) with my second working iPAQ connected and after the device recognition finished I changed the working iPAQ with the bricked iPAQ. After pressing the UPDATE button the ROM was flashed normally.
Hope this could help anyone else in a similar situation.
Click to expand...
Click to collapse
So, you need another iPAQ to bring your hx2410 back to live.
And mtty / universal bootloader is only for hTC devices, hx2000 series iPAQs are made by LGE.
Hi Spiaatie, I've searched all the forum, and tried all of the solutions given, but none of them worked for me, I've already seen that post, but unfortunately, I don't have any hx2410 nor any hx2XXX ipaq at hand, because hx2000 series are very rare to find here, I'm in Argentina, my ipaq it's from outside of my country, it's from US, I guess. And I've read in the official page (h**p://sourceforge.net/projects/ubl/) and forum (h**p://forum.brighthand.com/ipaq-hx4700-series/243984-universal-bootloader-tool-flash-any-valid-rom-any-ipaq.html) that the Universal bootloader tool is for any ipaq...so that's why I mention it..