Hi,
There use to be a software that I would install into my PC to control my old XDA version 1 via the cradle, but with O2 mini, there don't seem to have such a software. Can someone advise? Maybe, I am not looking at the right places. Please help.
Thanks in advanced.
Related
could anyone help me out of a mess please , i have recently purchased an mda3 to replace my xda2 , i unlocked the phone which went ok but wouldnt accept my o2 sim , being the same phone as the xda2s i thought maybe it would need the o2 windows version rom on , i selected the wrong rom from my pc and the upgrade stopped after a few seconds stating it was the wrong version but now the phone has no rom on at all just a dark screen with "serial" or "usb" if it is docked . Have i done permanent damage ? any help would be very much appreciated
Your phone is currently in bootloader mode - if you have a valid ROM for your device you should be able to flash it with the phone in the USB cradle (the dark screen should change to USB).
If you don't have a valid ROM, go check out the wiki, there's plenty to choose from there!
many thanks forza , as u can prob guess im new at this !
sorry to be a pain forza but unsure which files on the ftp to use , doesnt have to be the latest rom i just need it to work again , could you also tell me how to execute the files , do they load from the desktop , many thanks bren the amatuer
This page on the wiki lists the available original ROM packages;
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
The T-Mobile UK one (1.42) is the latest version ROM (3rd on the list), so I'd recommend you start with that (it's the one I use).
[EDIT] just noticed you're showing as being on O2, further down the list (almost at the bottom of the first section) there's a UK O2 ROM - that may be better for you.
With the phone docked in the cradle (with USB showing on the screen), you can just the run the exe you downloaded and it should flash it for you.
thanks forza ! your a star worked a treat
qtek 9090 with USB V2.06 message error
I have the same problem with my qtek 9090, but I dont can sync my pocket pc. I see only USB V2.06 if the pocket is full charged ( and serial if not on the crable connected ).
Why I can not sync this with my laptop??
I have make a hard reset but still not work!!!
please help me
I have read many post but nothing found...
thank you
scharmander ( newbee )
HELLO PEOLPLE:
I have just done a very big error with my pda. I wanted just only to reinstallthe same rom to format it and in the beguining of the process my pda stpos and also my computer.
Now my pda is whitout operative sistem and i can't conect it whit activesinc bacause the computer don't recognocise my pda.
WHAT CAN I DO NOW???
PLEASE, COULD SOMEONE HELP ME????
THANKS A LOT.
Screen shows Serial v1.02
Hello
I'm new here, and maybe I have a similar problem as Robertoko69 with my xda mini, I can't do anything, and it doesn't recognize the memory card, could somebody please, please, help? I whas triying to make work the bluetooth... and I have just buyed it today!!
Thanks a lot!
Hello:
I Erase accidentaly the O2 Connect aplication on my O2 XDA IIs PDA and now i can't find how to install again. I try to connect to the =2 website but i can't see WHERE i can download the application. I try too to download and install the =2 Connect from a XDA II mini but seems as there are different applications, because does'nt works.
Anybody knows where can i get this application? (I look all over internet and...no way!
Thanks you!
P.S. I know that if i do a hard reset i will be able to re-install the application but i preffer not do that, because i don't want to reinstall every program... Sorry for my english!
kayzinha said:
Hello:
I Erase accidentaly the O2 Connect aplication on my O2 XDA IIs PDA and now i can't find how to install again. I try to connect to the =2 website but i can't see WHERE i can download the application. I try too to download and install the =2 Connect from a XDA II mini but seems as there are different applications, because does'nt works.
Anybody knows where can i get this application? (I look all over internet and...no way!
Thanks you!
P.S. I know that if i do a hard reset i will be able to re-install the application but i preffer not do that, because i don't want to reinstall every program... Sorry for my english!
Click to expand...
Click to collapse
a thought on that.
I needed similar for both my blue angel and the hermes, I'm sorry I can't give a link at present as I'm on my vario II in the car just relaxing before having to go in for work. but if you look through the xda-developers ftp you can usually find the contents of most of all the devices Extended roms and be ale to download the cab file your BA would have used in the hard reset.
Other option if you could show/ unhide the extended rom and then copy a duplicate of the cab file from there to say my documents then run it from there.
Those are the 2 easiest ways I can think of at the moment
hope that helps
Hello all!
I've purchased O2 XDA Zinc in Arabian. I'm living in Russia now.
When I open the box, get the PDA and turn them on I've got screen like this:
mars II eboot ver......
h/w version v1.4
******** usb loader ***********
diskonchip g4 128mb
start downloading image...
please plug-in usb cable...
And that's all... Now I can't go to Arabian to change my PDA and there is no service center that can fix it in Russia
I tried soft and hard reset and no effect.
When I connect PDA to PC the new hardware "Asus USB sync" appear in system, but Active Sync does not recognise them (I have 4.5 version).
All o2 zinc upgrade software are working with active sync and available os and i can't use them.
I've extracted binary filles from update exe, larger of it i've rename to MarsII_G4.ABI and put it on SD. But after insterting card and restarting nothing happens.
I also have some knowledge of elelectronic.
So, please help, how can I fix my PDA?
Thank you in advise!
ok fer
find another ppc first
find a dos app and rename it to devicespy.exe and make it readonly
transfer it to windows directory of other ppc and plug it to pc via mini usb and activesync 4.5
download and run any zinc rom from seeo2
if you did it well the upgrade software cant recognize the device type so continue update progres until your ppc get reset.
replace that ppc with your zinc and update will continue to end and your zinc will be fin.
choose any lang you wish.
You'd better visit www.seeO2.com
and register with your IMEI.
Then you can download WM5 or WM6 official rom.
Hope this can help
Yeaaa!!
It's really working!!
Thank you!
I've recovered my device by using this method.
O2 XDA Zinc. Please, help
Hi where can I get dos app file??
hi all......
i do really need help for reviving my dead o2 zinc.
it is suddenly dead wen connected to notebook via activesync.
yes.. it is SUDDENLY DEAD.
i'm doing nothing.
i have been trying to entering bootloader (by pressing right d-pad plus soft reset), but the bootloader doesn't show up.
doing hard reset, but nothing happen. still dead.
one thing that works is...
there is blinking orange LED when i connected zinc with wall charger (without battery inserted)
and there is orange LED (showing up about 3-5 secs) when i connected zinc with wall charger (with battery inserted)
anyone can help me solving this?
how bout using mtty?
anyone knows?
hello there, this forum is great and it helped me a lot, but now i have again a problem:
I'm using an acer aspire laptop (without bluetooth) so i recently bought a Bluetooth usb dongle... and now i would love to connect my HD via bluetooth to my laptop using activesync, but I've some problems...
the situation on my laptop:
the bluetooth dongle installed successfully and is working (I can send and receive files via bluetooth)
the situation on my HD:
it detects my laptop and connects to it very well but when i try to connect via bluetooth in the activesync progg (on my HD) it gives me an error:
(I have a dutch device so i will try to translate the message)
"Could not find an existing bluetooth connection with a pc that supports activesync. would you like to create one?"
"Yes" -- "No"
if i click no it closes the message.
And when i click yes it redirects me to the bluetooth settings (then i go to the devices tab and there i find my laptop when i tap on it, it opens the settings and in the list i see activesync checked)
so whats the problem ... or what do i wrong
can some one please help me ... please i need it,
or better is there an alternative activesync... (already searched the web but no results)
A BIG THAANXZ TO ALL OF YOU
sorry for my bad English
ps: i use the original rom of htc and i use vista (so wmdc)
(whoa over the 90 views and no answer? )
oke now i am sure... it's the HTC's fault , cause i tried to connect my HTC Apache (with an older rom.. and an older version of activesync mobile) via bluetooth and it worked like a charm!
[first connected it with usb cable to set up a profile then disconnected it.
opened activsync (on mobile) Menu -> connect via bluetooth -> set a new partnership -> found the pc and connected ! ]
but with the touch hd it says that there are no pc's that support a bluetooth connection via activesync...
so does any one has a cab for activesync (an older version or a newer that works)
(or cloud some one tell me how to get the activesync (cab) on the appach and then install it on the htc)
thaanxz
why is there no response? is it so difficult?
Problem solved ThanxZ 4 nothing this time -.-
if any one has the same problem i can help