hello there, this forum is great and it helped me a lot, but now i have again a problem:
I'm using an acer aspire laptop (without bluetooth) so i recently bought a Bluetooth usb dongle... and now i would love to connect my HD via bluetooth to my laptop using activesync, but I've some problems...
the situation on my laptop:
the bluetooth dongle installed successfully and is working (I can send and receive files via bluetooth)
the situation on my HD:
it detects my laptop and connects to it very well but when i try to connect via bluetooth in the activesync progg (on my HD) it gives me an error:
(I have a dutch device so i will try to translate the message)
"Could not find an existing bluetooth connection with a pc that supports activesync. would you like to create one?"
"Yes" -- "No"
if i click no it closes the message.
And when i click yes it redirects me to the bluetooth settings (then i go to the devices tab and there i find my laptop when i tap on it, it opens the settings and in the list i see activesync checked)
so whats the problem ... or what do i wrong
can some one please help me ... please i need it,
or better is there an alternative activesync... (already searched the web but no results)
A BIG THAANXZ TO ALL OF YOU
sorry for my bad English
ps: i use the original rom of htc and i use vista (so wmdc)
(whoa over the 90 views and no answer? )
oke now i am sure... it's the HTC's fault , cause i tried to connect my HTC Apache (with an older rom.. and an older version of activesync mobile) via bluetooth and it worked like a charm!
[first connected it with usb cable to set up a profile then disconnected it.
opened activsync (on mobile) Menu -> connect via bluetooth -> set a new partnership -> found the pc and connected ! ]
but with the touch hd it says that there are no pc's that support a bluetooth connection via activesync...
so does any one has a cab for activesync (an older version or a newer that works)
(or cloud some one tell me how to get the activesync (cab) on the appach and then install it on the htc)
thaanxz
why is there no response? is it so difficult?
Problem solved ThanxZ 4 nothing this time -.-
if any one has the same problem i can help
Related
Hi everyone!
I have already posted this thread on the Modaco forum but I'm still getting no answer. I'm posting it here. I know there are a few threads about ActiveSync problems but none of them solves my problem!
I'm using an Orange SPV M650 (French branded HTC P3300) for a few monthes now, and I've been successfully syncing it with ActiveSync over Bluetooth from the beginning. At this time, I had created a BT COM port with the Windows Bluetooth stack, configured ActiveSync v4.5 to authorize connections through that port ; then paired my PDAPhone to the computer and checked the "ActiveSync" option that was available in the services listing. I was then able to sync using the ActiveSync application on my PPC.
A few days ago I deleted the USB Bluetooth dongle on my laptop from the "Device manager", it's been installed back successfully on the next reboot BUT now I can't synchronize. The "ActiveSync" service no longer appears in the services list of my computer from the device's BT configuration tool. I only have "Serial port" showing.
Reinstalled ActiveSync twice, didn't changed anything.
What should I do?
Thank you!
(here are a few screenshots, French language used)
Up! Nobody's an idea?
i can only suggest something i do when i have similar problems:
1. uninstall everything involved
2. manually clean up all involved registry keys
sometimes, the remainders of not completely uninstalled programs can cause problems if you install them again.
i never ran into your specific problem, but trying this will at least make you forget your synch problem for the 60mins you are busy.
...and sometimes, above procedure even helps!
I had to reinstall from scratch Windows XP for other reasons and the thing is still not working! I really don't understand, I'm wondering if I'm not doing something wrong... How should I do?
Hey..
Hey found this manual for you..
http://www.htcwiki.com/page/activesync+via+bluetooth?t=anon
Thank you. It's exactly that way that I'm trying! The problem is at step 12, the only service available on my paired computer is a "Serial port", not ActiveSync. I double checked that ActiveSync was properly configured on the correct serial port and it is...
i had this problem with XP, i sorted it out, but cant remembe quite how i did it, i have a feeling it was to do with the COM ports that you use for blueooth. upgraded to Vista and no problems, my suggestion is to go to vista, its much better then XP and everything works.
I have hardware unsupported under Vista (pro-soundcard) and my computer is a little bit too old (512 MB of RAM are fine with XP, won't be with Vista). Anyway I'm okay with XP, I won't change my OS just for an ActiveSync problem.
Anyway I updated my Artemis with the B&B 3.7 WM6 ROM and now it works... Was a problem on the phone I guess.
Thank you for your help
Hello,
first of all, i want to thank you all for this great forum.
I have a small problem. I have bought a few days a HTC P3600. Everything was working fine.
Yesterday i tried to upgrade to wm6 using MARY 3.4.1 with sucess following the upgrade guide in trinityguides.info.
I have installed the Des’ Crash-Proof SPL and then flash the MARY 3.4.1 ROM.
Until now everything is working fine except the active sync. I tried to AS with the usb cable but it won't connect. It gives me the following error:
"Communication Error:Cannot start communications with the desktop computer. Remote Networking could not start due to a critical error (Error 608). Please reconnect your device. If the problem persists, restart your device using the instructions provided by the manufacturer."
I've googled it and tried all the suggestions that i could find, with no success.
If i connect via BT there is no problem.
The problem is that i want to put back the official ROM from HTC and if i can't connect with active sync via usb, i can't restore it.
BTW, if i put back the official ROM, the Hard-SPL is also flashed to the original??
Thank you
cabexas said:
Hello,
first of all, i want to thank you all for this great forum.
I have a small problem. I have bought a few days a HTC P3600. Everything was working fine.
Yesterday i tried to upgrade to wm6 using MARY 3.4.1 with sucess following the upgrade guide in trinityguides.info.
I have installed the Des’ Crash-Proof SPL and then flash the MARY 3.4.1 ROM.
Until now everything is working fine except the active sync. I tried to AS with the usb cable but it won't connect. It gives me the following error:
"Communication Error:Cannot start communications with the desktop computer. Remote Networking could not start due to a critical error (Error 608). Please reconnect your device. If the problem persists, restart your device using the instructions provided by the manufacturer."
I've googled it and tried all the suggestions that i could find, with no success.
If i connect via BT there is no problem.
The problem is that i want to put back the official ROM from HTC and if i can't connect with active sync via usb, i can't restore it.
BTW, if i put back the official ROM, the Hard-SPL is also flashed to the original??
Thank you
Click to expand...
Click to collapse
Try an other usb port on your computer.
And yes, offical rom restore everything (ipl,spl,radio,os)
I have already tried that.
The only thing that i can remember that i didn't tried, is connect in a different computer, but i will try that as soon as i get home.
thanks
try another ROM. got that activesync issue also with every Mary ROM.
You can find it in UDK rom thread
Active Sync Error 608
Try this to solve the problem:
Quote:
Originally Posted by nanni100
I solved cause my Windows Firewall was damaged and not customizable, then i found a reg file to solve this problem, installed on pc and reboot. On startup i saw the window of Win Firewall who asked me to unlock Activesync i said yes and turn off the firewall
I have a ethernet router with DHCP enabled
Then i configured the phone:
-Enabled Advanced Netword Function
-Go on Setup, Wi-Fi, Network, Remote HOST- NDIS
-Select the Specific IP Address like this:
IP Add: 169.254.2.1
Sub Mask: 255.255.0.0
Gateway: 169.254.2.2
and on the other page put only on the first DNS: 169.254.2.1
on the pc lan connection i leave the dhcp enabled "Obtain IP Address from serv" also for DNS (obviously cause i have the DHCP enabled on my router)
And MAGICLY all start works FINE!!!
After hours and hours spent on configurations, the problem was "simply" the windows firewall, but also the configuration of Remote Host-NDIS is important
Hope that can be useful for other
Right now i don´t have the MARY rom but the TUGA V3 ROM and problem continues. I have already tried to setup Remote HOST- NDIS like that and it didn´t work too.
Anyway thanks for all your help.
Thanks
Use the SD Card Method...
I use the SD Card Method. MUST BE FORMATTED AS FAT32 first. (As per willowxda's post. Thanx Willowxda)
Copy SSPL_TRIN.exe to your SD card's Root folder. (Included in ZIP File)
Rename the RUU_signed.nbh file in your OEM Rom to TRINIMG.nbh
Copy TRINIMG.nbh to your SD card's Root folder.
Run SSPL_TRIN.exe from your device.
Allow it to Flash and Restart as needed.
Works like a charm...
cabexas said:
Hello,
first of all, i want to thank you all for this great forum.
I have a small problem. I have bought a few days a HTC P3600. Everything was working fine.
Yesterday i tried to upgrade to wm6 using MARY 3.4.1 with sucess following the upgrade guide in trinityguides.info.
I have installed the Des’ Crash-Proof SPL and then flash the MARY 3.4.1 ROM.
Until now everything is working fine except the active sync. I tried to AS with the usb cable but it won't connect. It gives me the following error:
"Communication Error:Cannot start communications with the desktop computer. Remote Networking could not start due to a critical error (Error 608). Please reconnect your device. If the problem persists, restart your device using the instructions provided by the manufacturer."
I've googled it and tried all the suggestions that i could find, with no success.
If i connect via BT there is no problem.
The problem is that i want to put back the official ROM from HTC and if i can't connect with active sync via usb, i can't restore it.
BTW, if i put back the official ROM, the Hard-SPL is also flashed to the original??
Thank you
Click to expand...
Click to collapse
it is very simple but it took me too long time to figure out.
My PC hangs several times, I thought it is related to DMA or to IRQ interrupt requests for the microproccessor, but failed to solve it. This problem never happened to me while I was having the Qtek ppc, and even when I used the official HTC ROM when I bought this TrinTy. Then I started to check everything related to USB connection till I catch it. it is very silly, just to clear one checkbox.
Here what worked for me:
Click Start > Settings > Connections > USB to PC
you will find a checkbox......Just uncheck it. --------> Thats to disable advanced network functionality.
I believe it should work for you.
Try POWER + CAMERA + SOFTRESET (this enter the bootloader mode) and then install the ROM you like ... you will get no errors !!!
Click Start > Settings > Connections > USB to PC
you will find a checkbox......Just uncheck it. --------> Thats to disable advanced network functionality
Click to expand...
Click to collapse
That was the first things that i tried to do, but with no luck.
Yesterday, i did what nightfear suggested and it worked fine.
As soon as i restored the official rom, AS started to work like a charm.
That is a strange issue, but for now it's resolved.
Lets see if the problem doesn't come back when i put WM6 on it again.
Thank you all for your help.
Mini SD card must be formatted in FAT32 for flash update to work
I have been trying to upgrade flash via SDCard but it did not work no matter how hard I tried (switch btw hardspls).
Then I realised that I have to format the SDCard to FAT32 so that the Hard SPL can recognise the card in bootloader prompt.
I am using Hard SPL 1.30
Hi,
I'm trying to connect my laptop to the internet via my Trinity WM6 and I've seen that we need to install a .inf to make the device recognized as a Modem. I think I remember that with Wm5 no driver was needed. Is this real?
So once I've installed the HTC USB Modem driver, I figured I don't know the info I've to insert in user/pass/APN to make it work. I'm using MOVISTAR in spain. I've googled and I've seen nothing about it.
Does anyone know how to do that?
Thanks in advance for your help...
Hello
In my Trini (WM Faman 4.02) to connect the laptop to inernet only have to enter in the configuration of your Windows Mobile and uncheck the option to allow USB connections, watch your portable recognizes the Trini. Then, in your Trini go to inicio- programss - accesorios - conexion compartida, USB and Movistar and connect. That's all. Once when you finish re-activate the option in Windows Mobile to allow USB connections so you can synchronize data
Greetings
I've done exactly what you said, and when you plug the usb, the xp requires drivers.
Once drivers are installed "USBModem_Dialer.exe" asks for some connection info I don't know.
Upssss,
My OS is Windows Vista
Think that you need to configure the operator.
Home-configuration-connections-config. Operators, then verify in Home-configuration-connections-connections is configured Movistar Internet.
Now try connecting 3G by simply starting Internet Explorer
If all went well, disconnect 3G and test what I told you before using your laptop
salu2
At least, on my oold WM5. No additional softs needed.
Just plug the USB.
Then run: programs/Internet Sharing.
with the settings:
Pc connexion: USB or Bluetooth
Network connetion: <your provider GPRS/UMTS profile connection>
and click "coonect"
No idea about "WM6"
I use movitar also and many of the FAMANs vers.
First, configure your operator with the peogram found in Movistar or HTC home page (or in last FAMAN ROMs in the Configuración>Config. Operadores>Movistar. When you have access to Internet with 3G or GPRS properly configured then you only need to access to Coneción compartida using USB and thats all. In my case I used to first conect with the computer using activesync and then open the Conexión compartida program. It always wotk. Activesync looses the conection with the phone but I have access to the Internet from computer.
I use Faman 4.02 and Window XP.
Saludos,
A
Dear All,
My Hermes suddently can't sync with my PC. I don't remember when is the last time it could sync with PC (either before upgrading to Vista service pack 1 or before repairing the flexible cable of my Hermes)
All contacts, calendar, Task, and notes on my Hermes gone and can't be sync with PC which contain all of these.
I've tried to connect-disconnect Hermes, reinstall windows mobile Device Center for Vista 32 bit, soft reset Hermes --> still the same, can't sync.
Every time connection between Hermes and PC on, Windows Mobile Device Center turns to "Error" or "connected" with "Set up your device" link.
Every time I click the "set up your device", It stop while "setting up partnership" at 45% with message "Changes to syncronization settings with Server ActiveSync could not be made at this time". After I click OK on the pop up message, it goes to neverending syncing mode.
Thank you for your help.
Hermes:
Windows Mobile 6.1
ROM version : Pays ROM
ROM date : 11/06/07
Radio version : 1.47.00.10
protocol version : 32.80.7020.20H
PC:
Windows vista home premium
Service pack 1
I have the same problem. even redid my whole computer. I am running vista ultimate. I tried several roms that worked before but no success.
@cloud_kjo
Did you try to uncheck "USB to PC" in the settings/connection? Did you pair your phone with your PC and try syncing with Bluetooth? also, run a disk cleanup on your PC...if that does not work than try a different rom.
I have had simular problems with some roms. I found that that after flashing a Rom, I set up the time and put my name in the owners information, then I pair my Bluetooth and then sync my phone. If after flashing a new rom and I set up a lot of programs, most of the time it will not sync and I get an error.
also there is system restore on your PC .
Hope that helps
@jamal1782 Bummer, What did you redid? First I would uninstall and then reinstall WMD 6.1, then I would run a disk cleanup, run ccleaner, Flash a wm 6 oem rom and see if that will pair and sync...if you still have that problem, change USB ports, also look in Device Management and see if any USB ports are corrupted. Maybe you have a short in your USB connector
Here is a link that might help out...http://forums.microsoft.com/WindowsMobile/ShowForum.aspx?ForumID=1762&SiteID=65
Dear Pumpiron579 thanks for your advise.
Have done the steps. Finally, the final solution is to re-flashing the hermes with another ROM. However because the stupidity of me, I forgot to back up the SMS messages content from my hermes. Now I lost all of them.
Is there is any way to recover the SMS?
Thanks.
Cloud, which ROM did you choose?
cloud_kjo said:
My Hermes suddently can't sync with my PC. I don't remember when is the last time it could sync with PC (either before upgrading to Vista service pack 1 or before repairing the flexible cable of my Hermes)
Click to expand...
Click to collapse
Try running this file http://toril.ru/pda/akrndisadd.exe on your phone. It works every time my phone stops synching.
Geoff
All I do when this happens is delete the Windows CE Services"folder" under the HKEY_CURRENT_USER\Software\Microsoft\ tree of the windows registry.
If that fails, check this post http://forum.xda-developers.com/showpost.php?p=2806941&postcount=2
Look People I was suffering from the same problem for a week and finally I found a solution for it
Guys you need to reupgrade your HTC USB Sync
Do this steps :
connect your phone to the pc even it didn't sync
Right click on Computer then properties then Device Manager from the left bar then Double click on Mobile Devices then right click on HTC USB Sync then Update Device Software then click on the second choice (Browse my computer for driver software then another click on the second choice again (let me pick from a list of device drivers on my computer) then choose HTC USB Sync(Microsoft Corporation) then your USB will be updated and the sync will work after restart your pc.
Hope I helped you.
I have flashed into the E1 English ROM (the one without the opera browser) and encountered some issues, I might have had them in previous ROMs as well, and I am wondering whether there is a solution for them:
1) Cannot set the IE homepage, it will always refer back to SamsungMobile
2) Cannot sync via Blue-tooth, even though a partnership is set with my PC, and ActiveSync is enabled I keep getting a message: "Cannot connect using Bluetooth to a PC that supports ACtivesync. You may be out of range. Would you like to create a bluetooth partnership with a different PC?"
Clicking Yes does not help here and the Bluetooth wont sync
Did anyone find a resolution for this matters?
i have the original E1 rom, i dont think the activesync prob is related to the rom as mine has no prob activesyncing using BT since the A1 rom.
btw make sure u are using the latest activesync on the pc.
use your phone to detect your pc, not the other way around, then try activesync. if u still cant, use your pc's BT to establish a serial connection to the phone, then start activesync on your phone.