XDA iis touch screen not working - MDA III, XDA III, PDA2k, 9090 General

Hi everyone, this is my first post here but I have been reading the posts on here since I first became interrested in the idea of a PDA phone a while back,
I have just bought a 2nd hand XDA iis here in Australia, and found that the touch screen is not working, (worked when I got it, and a few times since).
After hunting around the net to see if it was a common problem I found this link and though I could fix it myself and bought some tork screwdrivers.
http://www.mtekk.com.au/forums/viewtopic.php?t=5380&start=0&postdays=0&postorder=asc&highlight=
I managed to open it up and thought that I had got it fixed, but it is still not working, frustratingly everthing else does but not the touch screen.
I was wondering if anyone else has opened theirs up and knows what I am doing wrong, don't want to get it fixed by a shop unless I have to as I have fixed another PDA that had a dead battery once using a Nokia battery. (Toshiba e570).
Please let me know if any other brave/foolish soul has opened theirs and taken photo's of it's guts, unsure if I need to replace membrane or just clean it off.
Thanks for reading

Related

HELP!! Artemis blank white screen and not responding :(

ok everyone my first post here and I am not very familiar with the technincal stuff so please explain the fix properly (if their is any)
I have the o2 xda orbit and I never tried to modify it (change firmware, rom etc) or upgrade to WM6. Everything is original the way that it came. I have been using the orbit for about 6 months now and I had bought it off ebay.
Just yesterday I was chargin the orbit through the usb cable and I removed it since i had to go out and i just put it in my jeans pocket and after 5 min when i took it out there was a blank white screen. I took the battery out overnight and turned it on in the morning but still the same thing happens. The images below show exactly what shows up on my screen
I dont know what to do The minute i turn it on that is the only screen i see. No windows logo nothing. I removed the sim card and memory card. But still no luck. Can i change it through warranty eventhough I live in Canada? ANy help is appreciated!! I would be glad to give more information to you if I can.
If you know of any other forums where i can get better help, please let me know.
Switch it on but hold in the voice record button when you do it, do you get a Red/Green/Blue screen?
Maybe, it saw a ghost?
MaskedMarauder said:
Switch it on but hold in the voice record button when you do it, do you get a Red/Green/Blue screen?
Click to expand...
Click to collapse
nope same blank white screen with a line in the middle.
Looks like a serious hardware death there. Did you buy it off an ebay shop or private? If from a shop you may be able to make a warranty claim, if not you'd have to post it to a repair centre and cross your fingers.
I am presuming here that you have tried a Hard Reset too, ie holding down both softkeys whilst resetting, then releasing the softkeys when you get a confirmation message.
if i press the reset button nothing happens. Orbit only responds to the power button. I bought it off ebay and hence the problem. Do you think it is only a screen malfunction and if i buy a replacement screen I should be able to solve the problem? is it easy to replace the screen by myself?
I DONT KNOW IF IT'S WORK for you BUT... I work in a big shop where a lot of clients buy differents models from Htc and, 2 months ago, somebody have the same problem (with 2 lines) WITH a Tytn. We have flashing his tytn with the original rom and the problem has gone !
Have you try to make a connection with you pc ??? If activsync work...(maybe the bootloader work and ... of course, you can't see if the htc is running because you screen d'ont work for the moment)... you have nothing to loose if you try... If activsync dont work, try to put a original signed rom from htc to the root directory of your microsdcard and follow this tread from the xda-wiki section : http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
REALLY, I'M NOT A PROFESSIONAL BUT I REALLY THINK THIS IS MADE BY SOMETHING WRONG (FOR ANY RAISON) IN YOUR ROOT DIRECTORY AND THE SCREEN CAN'T WORK NORMALLY... oF IT'S MEABY DUE TO A BAD CONTACT BEETWEEN YOU SCREEN AND THE "MOTHERBOARD" FROM THE PDA.
I HOPE THIS CAN HELP YOU.
derooseolivier said:
I DONT KNOW IF IT'S WORK for you BUT... I work in a big shop where a lot of clients buy differents models from Htc and, 2 months ago, somebody have the same problem (with 2 lines) WITH a Tytn. We have flashing his tytn with the original rom and the problem has gone !
Have you try to make a connection with you pc ??? If activsync work...(maybe the bootloader work and ... of course, you can't see if the htc is running because you screen d'ont work for the moment)... you have nothing to loose if you try... If activsync dont work, try to put a original signed rom from htc to the root directory of your microsdcard and follow this tread from the xda-wiki section : http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
REALLY, I'M NOT A PROFESSIONAL BUT I REALLY THINK THIS IS MADE BY SOMETHING WRONG (FOR ANY RAISON) IN YOUR ROOT DIRECTORY AND THE SCREEN CAN'T WORK NORMALLY... oF IT'S MEABY DUE TO A BAD CONTACT BEETWEEN YOU SCREEN AND THE "MOTHERBOARD" FROM THE PDA.
I HOPE THIS CAN HELP YOU.
Click to expand...
Click to collapse
Could you give me step by step instructions on flashing the xda orbit rom. Out of frusturation i tried updating the orbit to WM6 and it successfuly updated according to message on my computer screen. So i have wm6 on my phone now but still the same problem.
I exctacted the file and put it in the root of my sd card and pressed the voice button and power button. Now how do i know that the ROM is being flashed? (since i just see the white screen). Even for the orbit should i just name the file on the microsd card as ARTEIMG.nbh ?
Thanks for all your help..but since i am new to this could you please explain teh process in more simpler terms?
Thanks again
dealsoutlook said:
ok everyone my first post here and I am not very familiar with the technincal stuff so please explain the fix properly (if their is any)
I have the o2 xda orbit and I never tried to modify it (change firmware, rom etc) or upgrade to WM6. Everything is original the way that it came. I have been using the orbit for about 6 months now and I had bought it off ebay.
Just yesterday I was chargin the orbit through the usb cable and I removed it since i had to go out and i just put it in my jeans pocket and after 5 min when i took it out there was a blank white screen. I took the battery out overnight and turned it on in the morning but still the same thing happens. The images below show exactly what shows up on my screen
I dont know what to do The minute i turn it on that is the only screen i see. No windows logo nothing. I removed the sim card and memory card. But still no luck. Can i change it through warranty eventhough I live in Canada? ANy help is appreciated!! I would be glad to give more information to you if I can.
If you know of any other forums where i can get better help, please let me know.
Click to expand...
Click to collapse
Sorry to tell you dear friend but your LCD is cracked, you can see it very clearly on the first picture, bottom right hand corner.
simple way to test if true is to connect to the pc and see if its recognised.
sorry to give you some bad news.
neilhhardy said:
Sorry to tell you dear friend but your LCD is cracked, you can see it very clearly on the first picture, bottom right hand corner.
simple way to test if true is to connect to the pc and see if its recognised.
sorry to give you some bad news.
Click to expand...
Click to collapse
i dont mind the bad news. So if i just buy a replacement lcd from ebay would that work? How hard is it to replace LCD? Is it something that i can do by myself? What should i be buying THIS OR THIS. You guys know of any other cheap places where i can buy lcd screen? My computer does recognise the orbit once i connect it to the computer and activesync successfuly completes the operation. So i am guessin there is something wrong with the lcd screen.
If You Put Out Your Battery More Than 30 Second, It Make The Same ?? And In The Same Place???
NOW YOU HAVE NOTHING TO LOOSE... if is it the screen, you must change it...
But before, try to flash one more time your artemis with the original wm5 and, for sure, begin to make it supercid before (so you are sure you dont make a second problem !).
The client with a same problem (but not with the little trace at the right side from your screen) is happy now ! Play also a littlebit to make hardreset, softreset, usb bootloadermode ... And maybe you will see the color coming back!
I said one more time, i am not a professional for this problem but, "still trying" is never bad.... And for the screen... if you command him, you must waiting... so... try it first and if you have no more solution to try, send the pdaphone to htc... And if it's the screen, pay the replacement to htc and dont make it you self ( ebay?? are you sure 100 % the screen you buy its working???!!!??? ).
Yeah, if your computer recognises it, it'll just need a new screen.
cr0bar said:
Yeah, if your computer recognises it, it'll just need a new screen.
Click to expand...
Click to collapse
Ok, first bit, there is a section on this forum on linking where to buy a lcd with touch screen, and there is also a guy who has done this, you can read up on it, but it will take you some time and hours removing the covers ( trying not to damage them ) and also hours of painfull cleaning, dust is the worst thing you could ever imagine,as soon as that nice lcd comes out of the package you will have dust all over it and once you have the phone back together the smallest amount of dust trapped inside will drive you crazy.
The best action for you to do would be to send it off for repair, in the end you will have your phone fully working.
the price of the replacement LCD is around 80 Euro's + sending cost.
the price you have to look into for a repair could be double.
but look into this carefully and ask yourself these questions.
1. Have you ever done this before.
2. Do you have the right tools.
3. Do you have a lot of paitience.
4. Is it worth doing it yourself and causing more damage to the phone ?
if you cannot say yes to all of these points that the solution is to send it off to repair.
hope this helps.
Regards.
Neil Hardy
to dealsoutlook
i've just sent you a pm! please check
Does anyone know, where can it be send for repair to?
I have a bricked phone (even bootloader is not started).
And it was bought at eBay, so no any warranty or so.
This is XDA Orbit and I'm in Austria, where O2 has no representation.
Could you, please, advice the companies/possibilities to reapir it (chip change or direct reflashing - not via USB).
Alex
neilhhardy said:
Ok, first bit, there is a section on this forum on linking where to buy a lcd with touch screen, and there is also a guy who has done this, you can read up on it, but it will take you some time and hours removing the covers ( trying not to damage them ) and also hours of painfull cleaning, dust is the worst thing you could ever imagine,as soon as that nice lcd comes out of the package you will have dust all over it and once you have the phone back together the smallest amount of dust trapped inside will drive you crazy.
The best action for you to do would be to send it off for repair, in the end you will have your phone fully working.
the price of the replacement LCD is around 80 Euro's + sending cost.
the price you have to look into for a repair could be double.
but look into this carefully and ask yourself these questions.
1. Have you ever done this before.
2. Do you have the right tools.
3. Do you have a lot of paitience.
4. Is it worth doing it yourself and causing more damage to the phone ?
if you cannot say yes to all of these points that the solution is to send it off to repair.
hope this helps.
Regards.
Neil Hardy
Click to expand...
Click to collapse
Thanks for letting me know..i though it was a pretty simple thing to do by myself. But now I definitely dont want to take that chance. I will shop around for some local cell repair shop. But since this phone is not available in canada I dont know where to go. Does anyone know of a repair shop in Toronto?
I would think the quickest turnaround would be throught HTCamerica. Its located in Houston Tx...
http://www.america.htc.com/support/service-repairs.html
thats just my two cents, turnaround time is like 5 to 7 days after receipt... if they service your phone, they do p3300, you would have to call to find out
Hey Buddy
dealsoutlook said:
i dont mind the bad news. So if i just buy a replacement lcd from ebay would that work? How hard is it to replace LCD? Is it something that i can do by myself? What should i be buying THIS OR THIS. You guys know of any other cheap places where i can buy lcd screen? My computer does recognise the orbit once i connect it to the computer and activesync successfuly completes the operation. So i am guessin there is something wrong with the lcd screen.
Click to expand...
Click to collapse
I can help u. just reply. I have gone thru such case. OK Post me and I will guide U
Cheers
This happened to mine too,and screen was not broken.Working internally but white 'screen of death' showing.Sent back to 02 but no mention of fault on return.I think rom suffers corruption since it was after x close, fix.Not sure though!

Xda Orbit keep freezing ...

Hi all ,
I have been using my UK orbit for about a year with no problem (so far). For the the past two weeks though after a random use of 2 to 5 minutes it freezes! It either stays with what is on screen or returns a white screen. From today also the led is not turning on while charging and it wont turn on !!
I tried re flashing, rebooting, putting back the older ROM but the symptoms happen, no matter what ROM or application is used.
A few days before this started if a remember correct I had bled dry the battery (in flight). But everything was ok for some time.
I would be really glad if someone could help me out, I really like ORBIT and wouldn't like to leave it. Keep up the good work for this magnificent site
I had the exact same problem with my P3300. It's a malfunction in the Motherboard. I've called the dutch helpdesk and because a hard reset didn't do much good the PDA was picked up later that day to be sent to Eurotwice, the repair station in Belgium. I got my phone back 2 weeks later, I started it and it froze again! So I immediatly called HTC Netherlands and again, the P3300 was picked up by UPS that afternoon. The second time I wrote a letter to the repair station and sent it with my phone. In another topic on another website I read that some other phone with the same problem had been fixed by replacing the motherboard. I got my phone back today and it works great! It hasn't crashed today, and I have confidence it won't in the future. So my tip to you and anyone who experiences this problem: Call the HTC helpdesk in your country and ask them to sent your PDA to a repair station. It might take a while but they fix it well! By the way, you have 2 years full garantee so it didn't cost me anything! Great service from HTC!

XDA Orbit touch panel nightmare

Hello guys, I just want to share my experience, and would like to have your comments on this ..
several weeks ago my O2 Orbit touch screen has stopped responding, not suddenly, but gradually loose it sensitiveness, in a week or so it has not responding at all.
then I read a lot of topic about replacing the panel in this forum, I ordered one from eBay, and got it replaced... the shocking reality is that the touch panel is still not working ...
note:
the LCD displays perfectly, both old and the new replacement, but neither of them responded to stylus taps..
Right now I dont know what to do .... am I out of luck ...
has anyone encounter the same problem ?
my friend also had a same problem...but not yet replace the panel....he update his rom but not solving the problems

HTC Artemis freezes or blacks out

Hi,
For two days I have had a serious problem with my HTC P3300 Artemis:
There are actually 3 different things that happen:
1. The phone freezes while working. No idea what causes it. Happened at different occasions.
2. The phone doesn't wake up when I hit the wake-up-button.
3. Often while rebooting the screens whites out or whites out and gets green or purple vertical lines.
In each case only removing the battery helps.
I use Mossisrom as my OS.
Can anybody tell me how to fix the problem? Is it a hardware or software problem? Please help me!!!
mfg
Ilu
iluvatar1 said:
Hi,
For two days I have had a serious problem with my HTC P3300 Artemis:
There are actually 3 different things that happen:
1. The phone freezes while working. No idea what causes it. Happened at different occasions.
2. The phone doesn't wake up when I hit the wake-up-button.
3. Often while rebooting the screens whites out or whites out and gets green or purple vertical lines.
Click to expand...
Click to collapse
I get the problem about waking up too. Sometimes it won't for a while. I leave it a couple of seconds and then try again which usually works.
Have you checked how much free internal memory you have. WM seems to still be very sensitive to low memory.
Hi,
I am rather sure that it's not a memory issue. The system freezes completely, not just for some seconds. I can't call the phone either. I think its either a SW or a HW problem and hoped, someone could tell me what to do.
mfg
Ilu
I can only suggest resetting the ROM back to a standard one and seeing if you still get the problems. If you do, it is probably a hardware problem and you should get the phone replaced.
I had the exact same problem with my P3300. It's a malfunction in the Motherboard. I've called the dutch helpdesk and because a hard reset didn't do much good the PDA was picked up later that day to be sent to Eurotwice, the repair station in Belgium. I got my phone back 2 weeks later, I started it and it froze again! So I immediatly called HTC Netherlands and again, the P3300 was picked up by UPS that afternoon. The second time I wrote a letter to the repair station and sent it with my phone. In another topic on another website I read that some other phone with the same problem had been fixed by replacing the motherboard. I got my phone back today and it works great! It hasn't crashed today, and I have confidence it won't in the future. So my tip to you and anyone who experiences this problem: Call the HTC helpdesk in your country and ask them to sent your PDA to a repair station. It might take a while but they fix it well! By the way, you have 2 years full garantee so it didn't cost me anything! Great service from HTC!
Wow, you had a great experience from HTC . I didn't. I had the exact same problem as posted. HTC claimed I broke the phone myself and wanted to charge me. They claimed something broke behind the screen and that I must've pressed it too hard, despite the screen still being intact. After three months of phone calls to the UK and a lot of empty promises (promised to get a manager to call me back, never got them. promised to discuss with repair dept and call me back, never got them) I finally got my phone back , fixed. No explanation as to why they changed their mind. I had asked them to take a picture for me of what was broken and to how they came to the conclusion that I was the one who broke it. Maybe they were too lazy to do it.

Replaced digitizer and still not working!!!

Hiya, will just let you know how far i am, ive been repairs mobile phone screens and lcds and other minor fixes for about a year now, my friend bought me her wildfire s round which the digitizer had been cracked, so i ordered a replacement and when fitted the part it didnt seem to work, all the connections are fine and cant seem to see anything wrong with the board? any ideas? i dont think the phone is on the latest android firmware but i cant check cos of the digitizer, so was thinkin of updating the phone first to see if that works? is there anyway of updating the phone without using the phone i.e connected to a pc? and if that didnt work was going to restore it to see if that works?
Im alright on the hardware side of things but not so on the software?
Im aware it could be a faulty part just wanted to rule anything else out first so if u have any ideas they would be gratefully recieved.
Thanks
you need to run the nbh file

Categories

Resources