Qtek 9090 and tomtom 3.01 problem - MDA III, XDA III, PDA2k, 9090 General

i got a qtek 9090 free operator with siemens BT kit and handfree kit car parrot. every thing was working almost properly if i wasn't too far from my device. i installed tomtom 3.01 on my pda and it was ok until i had to do a soft reset. after the soft reset its impossible to connect my BT handfree ( both if them) . after many tried the only way to fix the problem was a hard reset. i installed all again and everything worked again, but again after a soft reset the problem come back again. look like to be a probleme of compatibility whith some BT dll of TomYOM
any ideas?

I had same problem, but after I installed new BT patch it works fine.

can you tell me wich BT pach you installed, so i will avoid mistakes please ?

You need the Tomtom 3.07 update as you are under WM SE, and you cannot install tomtom trafic. If you have tomtom trafic, remove it and install TT 3.07 update (it is well documented on Tomtom website).

http://www.blueridge.net/dereck/bt/

if i install this pach on my qtek 9090 and i get problem, with a hard reset wil i find back my original setting of my PDA?

YES

ok thank you, look like it works
take care

Related

MDA 3 - Sorry! Bluetooth license is expired

Have been trying to resolve this (Bluetooth license is expired) problem but nothing seems to work. Currently have BT version 1.0.0.3900 loaded. I cannot use bluetooth as this license expired error message keeps on comming up then closed the turns bluetooth off. Please help..[/b]
have you tried a hard reset of your device, ????
if you havent, and you do try it, make sure you backup all your files!!!
8)
I have tried hard reset including installing the ROM and reverting to old BT and current but no luck. The blutooth originally worked for about 1 month and then this problem occured. I think I need a FIX for the licence issue. Please help someone!!!
edo you mean you tried to reinstall the rom you had??, or have you tried to upgrade/downgrade the rom??? surely, changing the rom should help the BT problem. :?
The rom version I have is 1.06.00. I upgraded to this ROM from the one that was installed by T-Mobile. After upgrading the bluetooth worked fine but stopped after a few months. The radio version I currently have is the 1.00.00. I have installed the new radio updates to see if it makes any difference but it has not worked. I am surprised that I have not seen this problem with anyone else??? Anyone out there who have resolved this problem get in touch...
blueangel bluetooth licence expired
Currently have BT version 1.0.0.3900 loaded, I have tried hard reset, can someone edit the registry to an open ended licence? (like cracking 14 day trial period programs) the BA works fine in every way but without bt, i cannot travel, (car headset or tomtom) dont really want to muck about with roms etc unless it includes a really succesful and stable bt. or is it a BA standard fault?
help?

MDA III Wi-fi, Bluetooth problem

Hi
I need to soft reset my device everytime i switch form bluetooth to Wi-Fi and vice versa. is there any way where i can use both 1 after the other or together without soft resetting?
WM2003SE
1.42.00 WWE
1.15.00
1.42.119
T-Mobile MDA III
have you tried to hard reset / factory reset?
is it happens after you upgrade to latest ROM for WM2k3SE ?
or even tried to upgraded to WM5?
(wishing not something happens to my mda III) :roll:
i hav exactly the same problem... once one of them is activated... cannot switch on the other 1... meaning when bluetooth on after soft reset, wifi cannot on until next soft reset and vise versa... irritating... any1 has a clue on how to fix this?
Me too same problem
Using WWE ROM 1.40.

lost bluetooth!

hello, in distress please help,Orange M2000 (blue angel)pocket pc will no longer pair with other devices using bluetooth.I have hard reset the device which as not worked. would it help if i reloaded the windows mobile2003 SE VERSION 4.21.1088 (BUILD15045.2.6.0) OR BIN THE DEVICE!last week i had no problem pairing my orange M2000 with my bluetooth gps antannae,but now the pocketpc will not pair with any device using the bluetooth manager,wondered if it was an hardware or software problem,many thanks PS can the bluetooth transmitter be repaired or replaced?
Have you tried this...
http://www1.orange.co.uk/M2000_patch/
Its the latest rom version for the M2000 direct from Orange, I know you have said you have done a hard reset but give it ago!
I know you know this already, but just in case - it will wipe everything off your phone so backup first!
many thanks bluetba
many thanks bluetba,used the link, reinstalled from the link and bluetooth is finding devices.thankyou so much and to the forum.

HTC P3300 / DOPOD p800W Flash Problem

Hello.
I just bought a replica of the dopod p800w and I would like to install WM 6. The reason for this is because normally there should be a wifi working on the phone but I cannot get it to work (if it exists). I was thinking that maybe the driver is not installed.
When i try to flash to wm6, activesync just disconnects (because the phone switches off). Can anybody advise?
Thanks.

Change modified IIs back to original ROM

Hi,
I've upgraded my XDA IIs a few times now and am currently using WM6 (ROM version 5.60.00 WWE) having followed the instructions on this website. I am beginning to get various errors and crashed on my device so I thought I would revert to the original manufacturers ROM (o2 - WM2003 - UK).
I went to their website and downloaded the ROM but when I tried to load the ROM back onto my device I received an error telling me that the ROM I was loading on to my device was from a different country/region than the one currently on my device and the installation had to stop.
I am assuming that somewhere in the uprading of my device (which I understand was completely at my own risk) the country of origin or location of the device/ROM has changed or has been replaced by one from a different location/region or one that has no defined location or region.
My biggest problem with the WM6 ROM is that my BlueTooth GPS device doesn't seem to work with the TomTom software anymore. TomTom can identify my GPS device but doesn't track any satellite, therefore it's pretty pointless. My Radio version is 1.12.00, all my COM ports are configured correctly as is my Baud rate. My TomTom version is 6.010.
Everything used to work perfectly with the WM2003 ROM and if I can't revert back or solve my problem then I may just bin it. Before that though I will try another BlueTooth GPS device... just incase!
Cheers.
Maybe you can try the latest ROM WM6.5 21189 before you revert back to wm20003. You can find all the stock ROMs in our FTP or you can xplode he got everything.
i had the same problem when going back to wm2003se for storage resizing purposes. as the roms published here are WWE roms, for your first upgrade you need to use Maupgrade_noID.exe and put the device into bootloader mode, for reverting you have to do the same. in my case, the german MDA3 rom aldo declined country error (WWE) and then even "this rom is not designed for your device", since uit identified as blueangels, where german devices are heavily branded and for the official update need to indentify as MDAs.
so just do the same as in upgrading:
1. Bootloader
2. MAupgrade_noID
and you will have no problem. it is just a matter of the carrier protecting their customers from bricking their devices, if they are unexperienced and maybe really picked the wrong device's rom or people from other countries try and steal their branded roms (yeah, like that's ever gonna happen!).
EDIT: I just saw the reason for going back is a bluetooth problem. I will think about it and repost here, maybe that is solvable without going back, because wm6.x is so nice, nobody should use 2003 anymore
Thanks for your replies.
I think I will try the WM6.5 first as you're quite right that WM2003 is not very nice at all!
I want to revert my pc
to Windows 95....
the first i think in... was the compatibility on apps.
It was just a little sarcasm.
OK, got an update on my bluetooth problem...
WM6.5 installed no problem, looks good and seems to be a bit quicker and smoother. Also, it gives more information in the bluetooth connections list than WM6 did as to what the status is of my bluetooth devices.
My device lists my bluetooth GPS as "paired" but "not connected". When I try to connect I get an error saying "Your device did not connect with BN909GR. The connection failed or the passcode is incorrect."
It looks more and more like it's my bluetooth GPS receiver which is knackered.
Have you tried pairing the GPS with another device? I assume it should pair with any device, ie another phone etc?
Hi,
Yes, I can pair my bluetooth receiver with ordinary mobile phones. I cannot test its functionality though as neither of the phones I have available to pair it with have any soft ware which uses the GPS receiver.
I haven't yet got hold of another Bluetooth GPS receiver to try with my BA...

Categories

Resources