Develop Bugs

Qtek 9090 and tomtom 3.01 problem

i got a qtek 9090 free operator with siemens BT kit and handfree kit car parrot. every thing was working almost properly if i wasn't too far from my device. i installed tomtom 3.01 on my pda and it was ok until i had to do a soft reset. after the soft reset its impossible to connect my BT handfree ( both if them) . after many tried the only way to fix the problem was a hard reset. i installed all again and everything worked again, but again after a soft reset the problem come back again. look like to be a probleme of compatibility whith some BT dll of TomYOM
any ideas?

I had same problem, but after I installed new BT patch it works fine.

can you tell me wich BT pach you installed, so i will avoid mistakes please ?

You need the Tomtom 3.07 update as you are under WM SE, and you cannot install tomtom trafic. If you have tomtom trafic, remove it and install TT 3.07 update (it is well documented on Tomtom website).

http://www.blueridge.net/dereck/bt/

if i install this pach on my qtek 9090 and i get problem, with a hard reset wil i find back my original setting of my PDA?

YES

ok thank you, look like it works
take care

MDA 3 - Sorry! Bluetooth license is expired

Have been trying to resolve this (Bluetooth license is expired) problem but nothing seems to work. Currently have BT version 1.0.0.3900 loaded. I cannot use bluetooth as this license expired error message keeps on comming up then closed the turns bluetooth off. Please help..[/b]

have you tried a hard reset of your device, ????
if you havent, and you do try it, make sure you backup all your files!!!
8)

I have tried hard reset including installing the ROM and reverting to old BT and current but no luck. The blutooth originally worked for about 1 month and then this problem occured. I think I need a FIX for the licence issue. Please help someone!!!

edo you mean you tried to reinstall the rom you had??, or have you tried to upgrade/downgrade the rom??? surely, changing the rom should help the BT problem. :?

The rom version I have is 1.06.00. I upgraded to this ROM from the one that was installed by T-Mobile. After upgrading the bluetooth worked fine but stopped after a few months. The radio version I currently have is the 1.00.00. I have installed the new radio updates to see if it makes any difference but it has not worked. I am surprised that I have not seen this problem with anyone else??? Anyone out there who have resolved this problem get in touch...

blueangel bluetooth licence expired
Currently have BT version 1.0.0.3900 loaded, I have tried hard reset, can someone edit the registry to an open ended licence? (like cracking 14 day trial period programs) the BA works fine in every way but without bt, i cannot travel, (car headset or tomtom) dont really want to muck about with roms etc unless it includes a really succesful and stable bt. or is it a BA standard fault?
help?

[Universal] radio 1.08.00

New radio rom 1.80.00 found in buzzdev.net
http://buzzdev.net/component/option.../id,245/chk,f591b2e6d03ade7ce6681bbbc7563b3a/
have fun

RE
Anybody tried it? Does it solves the bluetooth disconnection problem?
Thanks

Radio 1.08.00
Radio 1.08.00 seems to be for the Himalaya?

yep ! definetely for a himalaya !

I'm halfway through upgrading mine... maybe I should have checked the new posts in here before I started... :? I'll let you know how it turns out!
I had the Country ID error and ran it again. Worked second time.
I guess I can always reflash back to 1.06.00 if it all goes tits up! :lol:
EDIT: Presumably if it's for the Himalaya then WiFi connectivity will be broken once I've done it, since the Himalaya doesn't support WiFi. 30% done. I'll report back soon...

Melty said:
I'm halfway through upgrading mine... maybe I should have checked the new posts in here before I started... :? I'll let you know how it turns out!
I had the Country ID error and ran it again. Worked second time.
I guess I can always reflash back to 1.06.00 if it all goes tits up! :lol:
EDIT: Presumably if it's for the Himalaya then WiFi connectivity will be broken once I've done it, since the Himalaya doesn't support WiFi. 30% done. I'll report back soon...
Click to expand...
Click to collapse
Please let us know, so we could possible proceed as well.

im 88% through flashing, figured wtf 1.06 can go on again

Okay, I've done the upgrade and when I did a soft-reset my machine said
Radio 1.08.00
Protocol 42.41.P8
And I have connected to my wireless network at home and have successfully browsed to the bbc.co.uk homepage, so WiFi works.
I haven't put a SIM in my device yet (still using my old phone).
Why do you guys think it's for the Himalaya?

well it seems to work a treat chaps,
wifi connectec quicker im sure, not long enough for a thorough check but its working!!!

oops i forgot to remove the sd and sim, ahhwell, flashed first time, phew

Okay guys, here's what I've found so far:
WiFi works - connected to my home network and browsed
Bluetooth works - ran TomTom and got a fix
Phone works - Made a few phone calls.
AND... When I rang the Exec it indicated an incoming call the INSTANT I got a dial tone on the house phone and there was no delay before we could hear each other!
This looks like the real deal!

im sure this thing is running alot smoother aswell, so far 1.08 on the Universal is a green light, i dunno where this hymilaya thing has come from, but on buzz's site its in the universal section

Yeah I agree Carnivor. It looks very promising so far and all of the functions appear to work at least as well as before.
Just been syncing successfully with Exchange over WiFi.
Obviously if it starts crashing we'll report back, but nothing bad so far!

About wifi, did you have the need to turn on twice to connect, and is it solved with this radio? Ie: Some universal user can turn on wifi the first time, but if you turn it off (using the pocket pc menu, not by turning off the power), and you turn on again, it won't connect. You would have to turn off then on to connect.

i upgraded to my Jasjar and all went alright until I reset at the end and it want boot past the blue i-mate screen, I have even hard reset and still nothing.
Any help please.....
Or does anyone know how to put old radio or Rom on as it will not boot up so I can't use activesync
Please any help

I have tried doing an upgrade while in the screen where you hard reset it and still nothing, it just sits at the blue boot up screen
Please anyone, Thanks

seal said:
I have tried doing an upgrade while in the screen where you hard reset it and still nothing, it just sits at the blue boot up screen
Please anyone, Thanks
Click to expand...
Click to collapse
Just reset the device normally and plug in the USB cable.
ActiveSync won't connect, but it will be connected to your PC. Just run the T-Mobile ROM Update program then and everything should be fine
If you still want to upgrade to Radio ROM 1.08.00, then try the tutorial I wrote here:
http://forum.xda-developers.com/viewtopic.php?t=40986
Just follow all the steps for the radio ROM, and in the end throw away the non-radio ROM files before flashing
I'm using this method right now on my Dutch T-Mobile MDA Pro as I also had trouble with the NoID tool

Thanks for helping me.
You said use the T-Mobile Rom, I have a i-Mate Jasjar, is the T-Mobile Rom the only Rom that will fix this problem?

seal said:
Thanks for helping me.
You said use the T-Mobile Rom, I have a i-Mate Jasjar, is the T-Mobile Rom the only Rom that will fix this problem?
Click to expand...
Click to collapse
Err, sorry, my bad
I thought you had a T-Mobile logo in your name
No, if you have an I-Mate, use an original I-Mate ROM instead of the T-Mobile one
EDIT:
Actual feedback on this Radio ROM:
the GPRS refused to log in, somehow, although I'm not quite sure this is a problem with the ROM. I'll downgrade to 1.06.00 later and see if the problem persists.
Everything else seems to work just fine

Upgrade Radio 1.08.00
I just upgraded my Universal (OS: TMo 1.20.34) with Radio 1.08.
Everything running like a charm.
Cheers
hrb

Cingular 8125

Hi all
I have a cingular 8125 which was working perfectly fine till a week back. I have a strange problem. I tried connecting a new handsfree after which the mic was not working tried reloading the ROM and problem persists. hence gave it to the service centre for repairing. The problem is still more worse now. im not able to get any signal nor mic is not working. I also tried connecting via USB and its not recognising. however when connected via USB its getting charged. Any help is much appreciated.
I need to downgrde the ROM to WM5.
NOTE: this mobile has WM6 now.

http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
http://forum.xda-developers.com/forumdisplay.php?f=306
then downgrade it's the same way as one upgrade

Hi
My Active sync is not able to recognise the device.

Please Help..

Change modified IIs back to original ROM

Hi,
I've upgraded my XDA IIs a few times now and am currently using WM6 (ROM version 5.60.00 WWE) having followed the instructions on this website. I am beginning to get various errors and crashed on my device so I thought I would revert to the original manufacturers ROM (o2 - WM2003 - UK).
I went to their website and downloaded the ROM but when I tried to load the ROM back onto my device I received an error telling me that the ROM I was loading on to my device was from a different country/region than the one currently on my device and the installation had to stop.
I am assuming that somewhere in the uprading of my device (which I understand was completely at my own risk) the country of origin or location of the device/ROM has changed or has been replaced by one from a different location/region or one that has no defined location or region.
My biggest problem with the WM6 ROM is that my BlueTooth GPS device doesn't seem to work with the TomTom software anymore. TomTom can identify my GPS device but doesn't track any satellite, therefore it's pretty pointless. My Radio version is 1.12.00, all my COM ports are configured correctly as is my Baud rate. My TomTom version is 6.010.
Everything used to work perfectly with the WM2003 ROM and if I can't revert back or solve my problem then I may just bin it. Before that though I will try another BlueTooth GPS device... just incase!
Cheers.

Maybe you can try the latest ROM WM6.5 21189 before you revert back to wm20003. You can find all the stock ROMs in our FTP or you can xplode he got everything.

i had the same problem when going back to wm2003se for storage resizing purposes. as the roms published here are WWE roms, for your first upgrade you need to use Maupgrade_noID.exe and put the device into bootloader mode, for reverting you have to do the same. in my case, the german MDA3 rom aldo declined country error (WWE) and then even "this rom is not designed for your device", since uit identified as blueangels, where german devices are heavily branded and for the official update need to indentify as MDAs.
so just do the same as in upgrading:
1. Bootloader
2. MAupgrade_noID
and you will have no problem. it is just a matter of the carrier protecting their customers from bricking their devices, if they are unexperienced and maybe really picked the wrong device's rom or people from other countries try and steal their branded roms (yeah, like that's ever gonna happen!).
EDIT: I just saw the reason for going back is a bluetooth problem. I will think about it and repost here, maybe that is solvable without going back, because wm6.x is so nice, nobody should use 2003 anymore

Thanks for your replies.
I think I will try the WM6.5 first as you're quite right that WM2003 is not very nice at all!

I want to revert my pc
to Windows 95....
the first i think in... was the compatibility on apps.
It was just a little sarcasm.

OK, got an update on my bluetooth problem...
WM6.5 installed no problem, looks good and seems to be a bit quicker and smoother. Also, it gives more information in the bluetooth connections list than WM6 did as to what the status is of my bluetooth devices.
My device lists my bluetooth GPS as "paired" but "not connected". When I try to connect I get an error saying "Your device did not connect with BN909GR. The connection failed or the passcode is incorrect."
It looks more and more like it's my bluetooth GPS receiver which is knackered.

Have you tried pairing the GPS with another device? I assume it should pair with any device, ie another phone etc?

Hi,
Yes, I can pair my bluetooth receiver with ordinary mobile phones. I cannot test its functionality though as neither of the phones I have available to pair it with have any soft ware which uses the GPS receiver.
I haven't yet got hold of another Bluetooth GPS receiver to try with my BA...