HTC P3300 / DOPOD p800W Flash Problem - P3300, MDA Compact III General

Hello.
I just bought a replica of the dopod p800w and I would like to install WM 6. The reason for this is because normally there should be a wifi working on the phone but I cannot get it to work (if it exists). I was thinking that maybe the driver is not installed.
When i try to flash to wm6, activesync just disconnects (because the phone switches off). Can anybody advise?
Thanks.

Related

Qtek 9090 and tomtom 3.01 problem

i got a qtek 9090 free operator with siemens BT kit and handfree kit car parrot. every thing was working almost properly if i wasn't too far from my device. i installed tomtom 3.01 on my pda and it was ok until i had to do a soft reset. after the soft reset its impossible to connect my BT handfree ( both if them) . after many tried the only way to fix the problem was a hard reset. i installed all again and everything worked again, but again after a soft reset the problem come back again. look like to be a probleme of compatibility whith some BT dll of TomYOM
any ideas?
I had same problem, but after I installed new BT patch it works fine.
can you tell me wich BT pach you installed, so i will avoid mistakes please ?
You need the Tomtom 3.07 update as you are under WM SE, and you cannot install tomtom trafic. If you have tomtom trafic, remove it and install TT 3.07 update (it is well documented on Tomtom website).
http://www.blueridge.net/dereck/bt/
if i install this pach on my qtek 9090 and i get problem, with a hard reset wil i find back my original setting of my PDA?
YES
ok thank you, look like it works
take care

xdalls hard resetting !!!!

Hi there doe's anyone no why my xda11s keeps hard resetting every couple days as its doin my ed in keep setting it back up have had it for 6months'software ver is windows mobile 2003 se version 4.21,1088 (build 15045.2.6.0) only use it as fone most the time & tomtom5 sd card 512 and use bluetooth handset for driving, hope this helps as im takin it back to o2 if not as forums can help most the time & its quicker
Hi,
My blueangel did hard reset few times when I was using O2 ROM ( with 4.21.1088 CE ).
Therefore I switched back to T-Mobile ROM (also 4.21.1088) and the problem was solved.
I understand, that You purchased your Bluangel as "O2 brand". Therefore You may not want to use other ROM than O2's.
You can alway try to use some older O2 ROM.
But I recommend You to take T-Mobile ROM, and customize it (to get rid of T-MOB customizations).
You can always revert to original O2 ROM if you need to return your device (to keep warranty intact).
Good luck

Bluetooth Problem with wm6

Hi
After upgrading my device to the offical HTC E-Club WM6 (German) image i am unable to switch off bluetooth - it stays always active when its activated once with no possibility to switch off. Only way is to do a hardreset then its off until its activated again. Has someone experienced this behaviour?

Change modified IIs back to original ROM

Hi,
I've upgraded my XDA IIs a few times now and am currently using WM6 (ROM version 5.60.00 WWE) having followed the instructions on this website. I am beginning to get various errors and crashed on my device so I thought I would revert to the original manufacturers ROM (o2 - WM2003 - UK).
I went to their website and downloaded the ROM but when I tried to load the ROM back onto my device I received an error telling me that the ROM I was loading on to my device was from a different country/region than the one currently on my device and the installation had to stop.
I am assuming that somewhere in the uprading of my device (which I understand was completely at my own risk) the country of origin or location of the device/ROM has changed or has been replaced by one from a different location/region or one that has no defined location or region.
My biggest problem with the WM6 ROM is that my BlueTooth GPS device doesn't seem to work with the TomTom software anymore. TomTom can identify my GPS device but doesn't track any satellite, therefore it's pretty pointless. My Radio version is 1.12.00, all my COM ports are configured correctly as is my Baud rate. My TomTom version is 6.010.
Everything used to work perfectly with the WM2003 ROM and if I can't revert back or solve my problem then I may just bin it. Before that though I will try another BlueTooth GPS device... just incase!
Cheers.
Maybe you can try the latest ROM WM6.5 21189 before you revert back to wm20003. You can find all the stock ROMs in our FTP or you can xplode he got everything.
i had the same problem when going back to wm2003se for storage resizing purposes. as the roms published here are WWE roms, for your first upgrade you need to use Maupgrade_noID.exe and put the device into bootloader mode, for reverting you have to do the same. in my case, the german MDA3 rom aldo declined country error (WWE) and then even "this rom is not designed for your device", since uit identified as blueangels, where german devices are heavily branded and for the official update need to indentify as MDAs.
so just do the same as in upgrading:
1. Bootloader
2. MAupgrade_noID
and you will have no problem. it is just a matter of the carrier protecting their customers from bricking their devices, if they are unexperienced and maybe really picked the wrong device's rom or people from other countries try and steal their branded roms (yeah, like that's ever gonna happen!).
EDIT: I just saw the reason for going back is a bluetooth problem. I will think about it and repost here, maybe that is solvable without going back, because wm6.x is so nice, nobody should use 2003 anymore
Thanks for your replies.
I think I will try the WM6.5 first as you're quite right that WM2003 is not very nice at all!
I want to revert my pc
to Windows 95....
the first i think in... was the compatibility on apps.
It was just a little sarcasm.
OK, got an update on my bluetooth problem...
WM6.5 installed no problem, looks good and seems to be a bit quicker and smoother. Also, it gives more information in the bluetooth connections list than WM6 did as to what the status is of my bluetooth devices.
My device lists my bluetooth GPS as "paired" but "not connected". When I try to connect I get an error saying "Your device did not connect with BN909GR. The connection failed or the passcode is incorrect."
It looks more and more like it's my bluetooth GPS receiver which is knackered.
Have you tried pairing the GPS with another device? I assume it should pair with any device, ie another phone etc?
Hi,
Yes, I can pair my bluetooth receiver with ordinary mobile phones. I cannot test its functionality though as neither of the phones I have available to pair it with have any soft ware which uses the GPS receiver.
I haven't yet got hold of another Bluetooth GPS receiver to try with my BA...

Eten x610

Hi,
i've a eten glofiish x610 Phone since one year.
Yeasterday i've a message "Fatazl error, reboot your phone" or something like this.
Every time i turn on the phone, the initial setup begin (i lose all my data).
The Gps locator is launched.
The phone is very slow.
The phone is very often disconnect.
I've tried the reset but its always the same.
I'm lloking for the initial rom (WM 6.1 in french) and the program to use rom to try to resolve this problem.
Thanks for your help and sorry for my english.
Copper

Categories

Resources