Eten x610 - Upgrading, Modifying and Unlocking

Hi,
i've a eten glofiish x610 Phone since one year.
Yeasterday i've a message "Fatazl error, reboot your phone" or something like this.
Every time i turn on the phone, the initial setup begin (i lose all my data).
The Gps locator is launched.
The phone is very slow.
The phone is very often disconnect.
I've tried the reset but its always the same.
I'm lloking for the initial rom (WM 6.1 in french) and the program to use rom to try to resolve this problem.
Thanks for your help and sorry for my english.
Copper

Related

Has anyone figured out why gprs settings & exchange password are disappearing??

Has anyone figured out why gprs settings & exchange password are disappearing everytime you do a soft reset!!!!!! I flashed to the Dopod new SEA rom from the official HTC 1.23 for Europe. Is there a trick to stop it from disappearing after soft reset or the rom is bogus??
Gilbert
PS: I am writing from the trinity so I apologize if this topic was discussed
its not happening to me!
I am not sure if anyone else is experiencing this but I also seem to have hard-spl 1.07ds and the 3.03 that came with the dopod rom installed in my bootloader. how I know? well if I try to downgrade to the official htc 1.23, I get the 1.07ds in the bootloader and it fails, the I try to reinstall the new dopod wm6 and it works. I have super cided device & I can write to my extended rom. could this be the reason my gprs username and password and my exchange password keep disappearing afTer a soft reset? I made a hard resetusing the two buttons to get it to factory specs & it is still doing it. I have no installed programs.
i don't believe 1.07 is hard-spl, and i don't think you can actually have two spl's on there at the same time. I think one is just being overwritten by the other.
thanks for the clarification. however why in God's name am I losing my connection settings and exchange password everytime I soft reset when I have no programs installed or previously installed cooked roms. I remember the Dopod ANZ version might have had something like this and maybe dopod pulled the rom and promised to put another one in few days. I could be wrong about that.
thanks,
gilbert
I'm also experiencing the same problem and I couldn't find a solution for it.
Have you done a hard-reset after flashing?
Hi,
Gilbert said:
I am not sure if anyone else is experiencing this but I also seem to have hard-spl 1.07ds and the 3.03 that came with the dopod rom installed in my bootloader. how I know? well if I try to downgrade to the official htc 1.23, I get the 1.07ds in the bootloader and it fails, the I try to reinstall the new dopod wm6 and it works. I have super cided device & I can write to my extended rom. could this be the reason my gprs username and password and my exchange password keep disappearing afTer a soft reset? I made a hard resetusing the two buttons to get it to factory specs & it is still doing it. I have no installed programs.
Click to expand...
Click to collapse
Just discovering the flashing thing, so I'm not expert, but as far as I understand 1.07ds is not a hard-spl, but one that is pushed onto the phone by the update utility. To know what "resident" bootloader is on the phone, U need to enter the bootloader mode by pressing power+camera button plus doing a soft-reset.
Furthermore, to avoid installation of another bootloader (like the 3.03), I installed an hard-spl (olipro 1.30) and I put the phone into bootloader mode manually prior to flashing. Otherwise, the udate utility pushes the SPL 1.07ds which does not prevent the installation of the new 3.03 bootloader.
If you have the 3.03 on your device and want to downgrade, have a look at http://trinityguides.info at the Dopod WM6 Guide.
As to the disappearing Exchange password, I do not experience this pb.
Bye
yes, it is happening to me also on SEA version.
to be honest I was not overly impressed with the official SEA version so went back to AX3L's great ROM.
as for why the exchange and GPRS settings get lost, the only thing I seem to see is that it is if I installed or uninstalled some app that needed a reboot. it was not one particular app but I seemed to see the problem after installing / uninstalling themes and the kaiser home plug.
have you done any of these and seen the issue?
BMF
badmelonfarmer said:
yes, it is happening to me also on SEA version.
to be honest I was not overly impressed with the official SEA version so went back to AX3L's great ROM.
as for why the exchange and GPRS settings get lost, the only thing I seem to see is that it is if I installed or uninstalled some app that needed a reboot. it was not one particular app but I seemed to see the problem after installing / uninstalling themes and the kaiser home plug.
have you done any of these and seen the issue?
BMF
Click to expand...
Click to collapse
My pop3 account was gone after my FIRST flash with WM6 and install of the Kaiser home plugin. But then I did a hard reset, flash WM6 SEA again, and again hard reset. No problems at all anymore... Thats why I stated the hard reset
after hours of playing with the my bloody machine, i seem to have pinpointed the bloody problem. it is the new windows messenger doing all this crap. I am not sure how as I did not go through the codes but when I don't set up windows messenger and merge the contacts with the device, even if i do a thousand soft reset, the connection to the gprs automatically comes on and my exchange syncs no problem. but when you set up messenger with the device, you start getting the same crap of disappearing gprs settings and exchange password!!!
questsin said:
its not happening to me!
Click to expand...
Click to collapse
Me too.SEA version
What a total pain! Guess I'll stick with just the radio upgrade for now then.
I was going to suggest that if things seem funky after a ROM flash it is always worth trying a re-flash in case something just went a little awry first time around. But the fact others have found the same issue seems to clearly warn that this is not a one off misfortune.
Many thanks for letting everyone know... and good luck with straightening it out.
different experience
I had lost my Exchange passward and the Cingular GPRS setting info a couple of times, but after my back up today, I lost all the settings to the point that I couldn't even connect to Wi-Fi. I hadn't done a hard reset after my flash, so I am doing that now. I never set up Messenger, so I can't imagine how that could be the problem.
Would that be the same problem as the device password that some others were screaming in other threads about wrong device password?
http://forum.xda-developers.com/showthread.php?t=317841
I would guess that there's a credential database WM uses to store usernames and passwords, just like your desktop windows OS, and it either got corrupted on the memory or failed to write back to the filesystem after resetting the device.
The result would then be lost passwords, including device passwords, gprs, exchange, mails, wifi...
I have the ANZ official ROM and see the following problems (which I reported a while ago)
1) GPRS password occasionally gets blanked.
2) WEP password lost occasionally
3) Windows Live password lost occasionally .
I can't figure out what causes it- I rarely soft reset, preferring to turn off.
The biggest PITA is that my device code changed, which means I cannot use TT traffic until I get a letter from HTC.
Hmm, i'm suffering this problem also. It is mentioned in one of the various topics of the WM6 - Roms but really doný know where anymore. Anyone knows if this is possible to tackle?
Thanx!
Riel
Riel said:
Hmm, i'm suffering this problem also. It is mentioned in one of the various topics of the WM6 - Roms but really doný know where anymore. Anyone knows if this is possible to tackle?
Thanx!
Riel
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=342269
It's not the solution I guess.
I use Prophet, but this is only topic of it.
I can't make a new account, it sais 'Name exists'. But it isn't showing up, and can't find it in the registry ...
Any ideas were to remove the old ones?
No problems for a while
I followed some guidance after having the problems, and for a good many weeks it's been fine (maybe over a month).
I set all the passwords (web, WIFI) and BT pairing.
Then I turned the device off with the power buton (NOT soft reset).
SInce then, it has all stuck.

boot up/wifi problems

I got a X01HT and it has been flashed to WM6 by the seller. However, I have some issues with it.
1) everytime I soft reboot it, it will stuck at the green windows mobile interface and not going thru into my 'desktop'...but I can tell that the phone has ready since the GSM signal flashes. but the screen freezes up at the green greeting page...I have to stab the reset hole for more than 15 times and it can finally get into my desktop... pls help me with the boot up issues...it is quite annoying
2) last time my X01HT looks as usual, but the phone function lost without any clue...no calls in and out but all functions are working well. I sware the flight mode is shut off...how this happened ?
3) I can access to the wifi connection in my office and remote control my computer...BUT, I cannot browse any of the web pages on the device thru the IE or other browsers...any suggestions ?
Thank you so much for your help. New to this device.
no one could kindly lend me a hand ?
What error do you get when trying to load a web page in IE?
no error msg...it keeps searching...searching and searching...
maybe you have an old buggy version of wm6 on your device. try to flash a new release and see what happens. if you still have the problems, it may be a hardware problem.

Help! Unable to Connect to Server?!!

I've been trying to upgrade since yesterday (from PDAVIET .13, which kept losing my email account and crashed iGo.)
Decided to try Bepe's ROM (really like the big key video dialer
Just installed and registered all my apps (over an hour:-( and restarted.
Now I am greeted with:
MainWind.cpp: 148
Unable connect to server
I get the exclamation point (no service,) I cannot register to ATT's network and the phone dialer doesn't come up.
I have an inkling, that it maybe the Network Wizard which I ran, but I might be wrong.
Oh, and after the restart, my email account just disappeared too:-(((
I had a similar problem with the Ultra Light WWE ROM based on Dopod 3.00.707.18. Is there a problem with all of the recent Dopod-based ROMs, or is it me?
MacGuy2006 said:
I've been trying to upgrade since yesterday (from PDAVIET .13, which kept losing my email account and crashed iGo.)
Decided to try Bepe's ROM (really like the big key video dialer
Just installed and registered all my apps (over an hour:-( and restarted.
Now I am greeted with:
MainWind.cpp: 148
Unable connect to server
I get the exclamation point (no service,) I cannot register to ATT's network and the phone dialer doesn't come up.
I have an inkling, that it maybe the Network Wizard which I ran, but I might be wrong.
Oh, and after the restart, my email account just disappeared too:-(((
I had a similar problem with the Ultra Light WWE ROM based on Dopod 3.00.707.18. Is there a problem with all of the recent Dopod-based ROMs, or is it me?
Click to expand...
Click to collapse
I have the official Dopod SEA ROM and have no problems of any kind but I did have to enter the network/MMS settings to connect to the data network and send messages.
I think it is the Network Wizard. I just reinstalled everything again, then entered all the network settings manually. It works fine.
Before, i would get locked out of phone service after a reset or two, with the several Dopod-based ROMs I tried. And it seemed to happen shortly after running the Network Wizard. Updating the radio didn't help.
The only other possibility is that I opened up the Extended ROM with the Hermes utility, but I don't think I did it to all the ROMs.
I still got the disappearing email and network password thing, but tried to follow mUn's suggestion about disconnecting and soft-resetting, so we'll see if it works. Anyone with an answer why it keeps happening?
Frankly, I am a little miffed that these new Dopod ROMs are acting up on me. The old WM6 ROMs from mUn and LVSW were generally rock-solid....

No GSM/No Service on XDA IIs (BA)

Hi,
When i first got my BA, i upgraded from WM2003 to WM6.
This worked ok for everything (A few glitches here and there but i could live with them), but then, my phone battery had ran out, i charged it and loaded it up again and it now shows No Service on the today screen, so I can't make any calls off it.
I also noticed that when the phone boots it shows No GSM where it used to have 2 different numbers.
I've tried reflashing it to WM5, and also to WM6.1 but both of these didn't seem to fix it. The WM6.1 version I used can be found here http://forum.xda-developers.com/showthread.php?t=390862
Is there anything I can do to fix this?
Thanks!
Yes, fix is quick and easy and you can do it even at home: a soft reset.
Hi,
thanks for your reply,
I have tried soft and hard resets but this doesnt seem to fix it.
I wanted to try upgrading my Radio rom but when I ran the updater I got error 114. I'm not too sure what this means though?
Thanks!
Solution against "No Service" issue
Have a lot of Siemens SX66's. Just took one and ran unlocker, then flashed WM 6.0 and upgraded radio to 1.15.00. After that inserted SIM card and saw permanent "no service" message. Tried HR few times for no avail. Here's what really helped: I ran universal unlocker once again and then did soft reset. Voila! System booted and connected to GSM network. Hope somebody will find this useful.
Hi, All!
2 Larik007:
Did you have similate trouble with radiorom?
I have analogic problem with my BA (iMATE PDA2K)
At boot screen I see
No GSM
D 6.14 WWE
and boot process stops at this position.
Once my BA was booted up with this trouble, and goes to reboot and all repeats again.
I can't reflash radiorom.
At 61% I have "Error 114: Radiorom upgrade error"
I tried to reflash radioroms from 1.02 to 1.15, but nothing positive.
:-(
Can anybody help me?
No, my problem is because of some kind of error during unlock process, I guess. And your problem appears to be similar to "No GSM" issue of Hermes phones. But it may be repairable unlike Hermes ones...
Larik007 said:
Have a lot of Siemens SX66's. Just took one and ran unlocker, then flashed WM 6.0 and upgraded radio to 1.15.00. After that inserted SIM card and saw permanent "no service" message. Tried HR few times for no avail. Here's what really helped: I ran universal unlocker once again and then did soft reset. Voila! System booted and connected to GSM network. Hope somebody will find this useful.
Click to expand...
Click to collapse
I have the same "no service" issue. Can you give me a link for this magic universal unlocker
- what is this anyway?
Thanks!
http://wiki.xda-developers.com/index.php?pagename=BA_Unlock_Sim
Look for a link under word "this"
i had this problem, heres what i did that made it work,
1.re-insert the battery
2.press the on button
3.press the reset button TWICE
EVERY time you turn it off and on do this, but if you reset the phone you dont need to do it twice.
hope this works as it did for me,
Josh.
Partial solution for "No signal" problem
I think the idea was posted by xplode sometime ago- I spent a day playing with it, but it finally worked for me.
0) I had unlocked BA with 2003. Later on I upgraded it to WM 6.1 and then at some point I've got this "No service" issue. I upgraded my Radio to 1.15 (it did not help me- but I did this in the very beginning, so may be it matters)
1) I downgraded ROM to one of 2003 ROMs (xplode has a collection: http://tinyurl.com/cozbbx)
-) downgrade instructions are in here: http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
2) I unlocked band page for the network connection- it was discussed in (http://forum.xda-developers.com/showthread.php?t=297099)
2.5) I finally used this cab : http://forum.xda-developers.com/attachment.php?attachmentid=23788&d=1121269005 to set band selection to 900/1800 (still no service)
3) I removed sim card and did a hard reset followed by soft reset. I put a sim card back and soft reset BA.
--- I guess at this point it's 2003 with 900/1800 band and working
4) I upgraded my ROM to 6.5 and it is working now.
the link is dead.sorry for my bad english i've tried all the procedure but still had no gsm on my xda iis dont have imei and i cant see my radio version can you help me....
Lucky You that I still have troubleshooting tutorial in my file archive. I've written it by myself when was unlocking many of these devices.
Although I'm not sure if it will help with symptoms You listed...
Here it is what you can try to do if your Blueangel PDA phone constantly showing "No Carrier" and it is not possible to enter phone settings:
1. Take off the battery from the phone while it is turned on.
2. Place the battery back in, turn on the phone. At bootup there should be stated "NONE" instead of versions of "R" and "G" (seems that it is required to be so).
3. After OS had boot, run the Unlocker. Few times, maybe.
4. Reboot.

Can´t make calls!!!

Hello, i have windows mobile 6.1 portuguese instaled and since 3 days ago i can´t use the PDA as a phone, i can´t make calls, receive, etc...
I have a portugese sim card (TMN) and i have tryed to install again the windows mobile rom but didn´t solve the peoblem.
Please help,
Thanks
Did you flashed any radio rom?
Hello Zecanilis, i have used the "Artemis Update SPL (USPL) v.01" and then the "ARTEMIS_RUU" to have windows mobile in portuguese, and it worked for a cople of days, but since last friday i think, i cant use it as a phone. It says allways "A procurar".
Thanks
Try to flash a new Radio ROM.
Flash 3.34.90...
See here:
http://forum.xda-developers.com/showthread.php?t=397939
Chees
That didn´t work
Then you have a hardware fault...
Same problem...
Hi everyone.
I also have an friend's artemis that was always 100% until a few days ago.
It went with no apparent reason from normal GSM Service to "Limited Service" and the to "No SIM Card".
I've tried:
1- Downgrade and upgrade radio Rom's
2- Hard Reset
3- Reinstall Ark's ROM (but the problem is not here for sure)
4- Install Original WM6 PTG ROM
5- Test different SIM Card's
Still all I get is the "No SIM Card" message.
Any ideas before a trip to HTC Service Centre?
Hi guys, i had a similar issue sometime ago, with the sim card and the micro sd card, with me it was the contact pins of the device that were a bit dirty, and the sim was a bit old too, i changed the sim card and cleaned the pins, after that i had no more issues.
Hope it helped.
Cheers.
yes... I've forgot that tinny detail...
That should be the first thing to see... LOL
That wasn´t my problem because i put him a new simcard and it doesn´t work.
If i put automatic search it keeps searching all the time, if i put manual, i choose the brand (TMN), he gives the signal but don´t make calls, don´t receive, nothing...
Anyone with the same problem?

Categories

Resources