Hello, i have windows mobile 6.1 portuguese instaled and since 3 days ago i can´t use the PDA as a phone, i can´t make calls, receive, etc...
I have a portugese sim card (TMN) and i have tryed to install again the windows mobile rom but didn´t solve the peoblem.
Please help,
Thanks
Did you flashed any radio rom?
Hello Zecanilis, i have used the "Artemis Update SPL (USPL) v.01" and then the "ARTEMIS_RUU" to have windows mobile in portuguese, and it worked for a cople of days, but since last friday i think, i cant use it as a phone. It says allways "A procurar".
Thanks
Try to flash a new Radio ROM.
Flash 3.34.90...
See here:
http://forum.xda-developers.com/showthread.php?t=397939
Chees
That didn´t work
Then you have a hardware fault...
Same problem...
Hi everyone.
I also have an friend's artemis that was always 100% until a few days ago.
It went with no apparent reason from normal GSM Service to "Limited Service" and the to "No SIM Card".
I've tried:
1- Downgrade and upgrade radio Rom's
2- Hard Reset
3- Reinstall Ark's ROM (but the problem is not here for sure)
4- Install Original WM6 PTG ROM
5- Test different SIM Card's
Still all I get is the "No SIM Card" message.
Any ideas before a trip to HTC Service Centre?
Hi guys, i had a similar issue sometime ago, with the sim card and the micro sd card, with me it was the contact pins of the device that were a bit dirty, and the sim was a bit old too, i changed the sim card and cleaned the pins, after that i had no more issues.
Hope it helped.
Cheers.
yes... I've forgot that tinny detail...
That should be the first thing to see... LOL
That wasn´t my problem because i put him a new simcard and it doesn´t work.
If i put automatic search it keeps searching all the time, if i put manual, i choose the brand (TMN), he gives the signal but don´t make calls, don´t receive, nothing...
Anyone with the same problem?
Related
Suddenly my HTC P3300 doesn't connect to the Orange network.
I had the phone for over a month and now doesn't work anymore.
I have an italian SIM card and it works perfectly.
If I choose the automatic connection, the device keep searching forever, if I choose the manual, can't connect.
Not sure what happen here, Any ideas?
I'v tried soft, hard reset upload a new ROM, nothing!
Sounds more like a service provider issue than a phone issue.
Put the original ROM back in and then go to the nearest Orange store and tell them the problem.
I thought the same, but I think that there is something wrong with the actual device... If I try to choose any other available network that is not Tmobile, doesn't work..
Where did you buy your phone from?
It was a brand new? or 2nd hand
did U upload a pdamobizROM? If yes did U tried to restore anything from any bkup(sunnysoft, sprite, spb ....)I mean ie contacts or appointments ...?
If yes try other rom i found this prob with this rom. after restoring any bkup, it stops to connect to network(phone at least)
Yups same problem i have encountered with PDAMozbiz 1.1.2 ROM and am seeking help ..... is there anyone who can dedicate some of his precious time to help me out on this?
http://forum.xda-developers.com/showthread.php?t=295295
Hi,
I upgraded my Artemis to MW6 and now I get this error. "The SIM card is missing".
My ROM version is: 3.4.0.207.2 WWE
Radio Version: 02.67.90.
Eran
Oh dear, I got this on my O2 EXEC and then it started doing weird stuff and now its a brick.Hope u have better luck than me
just install the sim card again and the problem is over. That worked for mij artemis
i have arte100 wich has the same problem ...how to install sim card ?!
anyone knows how can i install the sim card ??
still looking for the SIM, LOL.
RTFM!
remove the battery cover and remove the battery, then remove the sim card by unlocking the clip and then place it back in and boot it up again
I had the same problem. I put another SIMCard in my Artemis and it was detected. After this my "old" Card worked again, too.
Removing battery and so on didn't solve the problem...
I had a probleme like that...i tried everything... nothing changed... Finally, I was really lucky, Orange changed my mobile for free (it's was still under warantly).
i tried tons of different sim cards,i opened the phone and put back together at least twice... nothing seems to work...
remove both sim card and sd card and flash the rom again and it should work...
i usually flash my device with both of them,but it is generally suggested to remove them
the same thing happens to me. i insert my t-mobile sim and everything works fine. but when i try my 3 sim nothing works!
im about to try another sim. wish me luck
looks like it was just the sim. 3 is one funny company. i hate them anyways!
For the problem solved by :
-Upgrade ROM with the last HTC original ROM (for me : HTC_P3300_FRA_3.13.406.1_4.1.13.44_02.94.90_Ship_R.exe)
-USPL with "1.11.cmon"
-Upgrade or Downgrade to Rom Radio 3.18.90
-Upgrade with a new rom (for me Shady313 build 23034b1)
-Upgrade Rom Radio to 3.21.90
At the end, you will have a ARTE100 with :
IPL : 3.13.0001
SPL : 1.11.cmon
Radio : 3.21.90
Rom : ....
My Solution
Same problem here
My solution is:
1. Open Comm Manager
2. Switch on Plane Mode (by selecting Plane icon)
3. Switch on Phone Mode again (by selecting Phone icon)
This solution work most of the time for me.
Hope this can help.
Sorry for my English.
The cause for it
does anyone know why is this happening ?
the cellphone gets worst and worst untill one day it never reads a sim card again... I changed the rom from a device and I unlocke SIM and CID, but forgot to remove the SIM card, is this the reason ?
how could i solve this because I see really nice 6.5 WMs out there... I luckly sent the phone back to HTC in brazil and they changed for me, but I am scared to try again, is there anyone here who knows a solution ???
or how to avoid this ?
come on it has passed over 1 year and no answers... I boght from TIM brazil and even a sim card from them would not work after I flashed...
I have the same problem, and have no idea what i can do
My phone work with every other sim, but only not with my...
rubensbasket said:
does anyone know why is this happening ?
the cellphone gets worst and worst untill one day it never reads a sim card again... I changed the rom from a device and I unlocke SIM and CID, but forgot to remove the SIM card, is this the reason ?
how could i solve this because I see really nice 6.5 WMs out there... I luckly sent the phone back to HTC in brazil and they changed for me, but I am scared to try again, is there anyone here who knows a solution ???
or how to avoid this ?
come on it has passed over 1 year and no answers... I boght from TIM brazil and even a sim card from them would not work after I flashed...
Click to expand...
Click to collapse
On mine I did this and worked:
go to registry editor
HKEY LOCAL MACHINE\ControlPanel\Phone
Menu New DWORD Value
Name it ShowSim
add the value 1 and press ok
(maybe a restart is needed)
Hope you can get lucky
...
hey, my artemis has just started doing this, for the past few days i go to sleep at night and device is ok, but when i wake up in the morning my device says ''insert SIM'' and no programs work but ''start menu''..
* i was going to take a screen-shot with V.SNAP and make a thread - but no programs would open..at all... weird because if device is booted with no SIM card, programs work.. never mind tho.lol
so i reset device and when it boots back up my SIM card is recognised but with no signal.
so i reset device and it works again..hmmmm..
* this does not happen every day, but its happening more often
i first noticed something was wrong when all was normal and then the signal bar turned into ''!'' and would stay like that until soft reset.
really hope that this is not the start of something bad.
* i strongly doubt this is a problem with the ROM or registry!
* if anything i think this is a hardware issue..maybe.. or the SIM card!
* i strongly doubt this is a problem with the rom or registry!
* if anything i think this is a hardware issue..maybe.. Or the sim card!
my artemis just wouldnt load the sim card the other day - at all!
Heres how i got it back to life again...
Open the device up and check all screws are screwed in properly, clean and put back together..
Easy!
This worked for me..
I have schaps 3 rom ,with 1.51 radio (for almost 1 month),everythign was working fine , yesterday all of a sudden i had no signal , sim not detected,same sim in other phone work , but hermes fails to detect any sim ,even without a sim card when I restart the phone I don't get simcard not detecete or missing issue.
Any ideas ? Should I try changning the radio rom ?
You may want to try the following...
1) Do a full backup of your phone (Sprite or SPB Backup)
2) Hard Reset your phone...
3) If Sim still not detected, reflash your phone again with your last WM6 OS or your phone's original OS.
4) After reflash.... check your SIM...
If your SIM is still not being detected, clean the contacts where the Sim contacts your phone with a cotton swab..
If that still doesn't work... your phone may be damaged and may need repair or replacement....
Good luck...
what if my hermes detects one simcard perfectly and the gets the sim menu for the other one but it is unable to recieve signals and just keeps on searching for a network....tried hard reset and no luck ....using schaps 4 and 1.54.07 at&t radio rom...
what should i do now?
thanx for the quick replies , I just noticed in the about section of the device, Radio shows 0.0,even when phone starts , radio shows 0, my radio is corrupted isn't it ?
radio....
it would appear you'll need to reflash with a radio version that it likes or accepts - try flashing with an orginal rom, then u know its definately not the handset - just your rom that your flashing with
I just tried the 1.54 rom , doesn't do anything , I am able to do a rom update but when I try the radio update I get stuck in the bootloader altogether , then I again have to do a complete rom update.
I've been reading in the forum , I am yet not getting any gsm error , but as I mentioned I am getting all Radio as 0 ,Imei as 0 when it does start.
Mind it,I started getting all this ,just all of a sudden, I wasn't flashing anything.
I have downloaded some older radio rom's , will try to see if they work and post here , finger crossed
Hi there! (First of all, Yep I've used the Search button)
I've just got a P750, and as soon as I got it, I've flashed a VGA Rom to it. Everything went good, the device started up as normal, and I've got the VGA resolution. After I've put a SIM card to and I've recognized, that the phone doesn't starts. It says that theres no signal. After may tries, with another SIM cards, I've flashed another Rom, and another, but the problem is still there, even after a Radio modul update, and even after the Official Rom.
Anyone has the sam problem, or got the solution for it?
p750 GSM issue - no signal
Hi,
I have the same problem. It happened before I started flashing the phone. Just like with you, flashing and upgrading the radio firmware didn't help.
Did you end up solving this?
-Aaron
Hi, I have the same problem, any ideas for solving??
i've got the same problem. i could solve it with setting my phone only to GSM-networks and not 3g/umts manually (done under connections tab)
but i got the issue with original official asus wm6.1 rom!!!
after contacting the support, they said it would cost me at least 150 euros! so i got rid off this crapy phone and bought myself an HTC, again
but if someone has an solution, i would try it of course.
Hi,
When i first got my BA, i upgraded from WM2003 to WM6.
This worked ok for everything (A few glitches here and there but i could live with them), but then, my phone battery had ran out, i charged it and loaded it up again and it now shows No Service on the today screen, so I can't make any calls off it.
I also noticed that when the phone boots it shows No GSM where it used to have 2 different numbers.
I've tried reflashing it to WM5, and also to WM6.1 but both of these didn't seem to fix it. The WM6.1 version I used can be found here http://forum.xda-developers.com/showthread.php?t=390862
Is there anything I can do to fix this?
Thanks!
Yes, fix is quick and easy and you can do it even at home: a soft reset.
Hi,
thanks for your reply,
I have tried soft and hard resets but this doesnt seem to fix it.
I wanted to try upgrading my Radio rom but when I ran the updater I got error 114. I'm not too sure what this means though?
Thanks!
Solution against "No Service" issue
Have a lot of Siemens SX66's. Just took one and ran unlocker, then flashed WM 6.0 and upgraded radio to 1.15.00. After that inserted SIM card and saw permanent "no service" message. Tried HR few times for no avail. Here's what really helped: I ran universal unlocker once again and then did soft reset. Voila! System booted and connected to GSM network. Hope somebody will find this useful.
Hi, All!
2 Larik007:
Did you have similate trouble with radiorom?
I have analogic problem with my BA (iMATE PDA2K)
At boot screen I see
No GSM
D 6.14 WWE
and boot process stops at this position.
Once my BA was booted up with this trouble, and goes to reboot and all repeats again.
I can't reflash radiorom.
At 61% I have "Error 114: Radiorom upgrade error"
I tried to reflash radioroms from 1.02 to 1.15, but nothing positive.
:-(
Can anybody help me?
No, my problem is because of some kind of error during unlock process, I guess. And your problem appears to be similar to "No GSM" issue of Hermes phones. But it may be repairable unlike Hermes ones...
Larik007 said:
Have a lot of Siemens SX66's. Just took one and ran unlocker, then flashed WM 6.0 and upgraded radio to 1.15.00. After that inserted SIM card and saw permanent "no service" message. Tried HR few times for no avail. Here's what really helped: I ran universal unlocker once again and then did soft reset. Voila! System booted and connected to GSM network. Hope somebody will find this useful.
Click to expand...
Click to collapse
I have the same "no service" issue. Can you give me a link for this magic universal unlocker
- what is this anyway?
Thanks!
http://wiki.xda-developers.com/index.php?pagename=BA_Unlock_Sim
Look for a link under word "this"
i had this problem, heres what i did that made it work,
1.re-insert the battery
2.press the on button
3.press the reset button TWICE
EVERY time you turn it off and on do this, but if you reset the phone you dont need to do it twice.
hope this works as it did for me,
Josh.
Partial solution for "No signal" problem
I think the idea was posted by xplode sometime ago- I spent a day playing with it, but it finally worked for me.
0) I had unlocked BA with 2003. Later on I upgraded it to WM 6.1 and then at some point I've got this "No service" issue. I upgraded my Radio to 1.15 (it did not help me- but I did this in the very beginning, so may be it matters)
1) I downgraded ROM to one of 2003 ROMs (xplode has a collection: http://tinyurl.com/cozbbx)
-) downgrade instructions are in here: http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade
2) I unlocked band page for the network connection- it was discussed in (http://forum.xda-developers.com/showthread.php?t=297099)
2.5) I finally used this cab : http://forum.xda-developers.com/attachment.php?attachmentid=23788&d=1121269005 to set band selection to 900/1800 (still no service)
3) I removed sim card and did a hard reset followed by soft reset. I put a sim card back and soft reset BA.
--- I guess at this point it's 2003 with 900/1800 band and working
4) I upgraded my ROM to 6.5 and it is working now.
the link is dead.sorry for my bad english i've tried all the procedure but still had no gsm on my xda iis dont have imei and i cant see my radio version can you help me....
Lucky You that I still have troubleshooting tutorial in my file archive. I've written it by myself when was unlocking many of these devices.
Although I'm not sure if it will help with symptoms You listed...
Here it is what you can try to do if your Blueangel PDA phone constantly showing "No Carrier" and it is not possible to enter phone settings:
1. Take off the battery from the phone while it is turned on.
2. Place the battery back in, turn on the phone. At bootup there should be stated "NONE" instead of versions of "R" and "G" (seems that it is required to be so).
3. After OS had boot, run the Unlocker. Few times, maybe.
4. Reboot.