Help! Unable to Connect to Server?!! - P3600 ROM Development

I've been trying to upgrade since yesterday (from PDAVIET .13, which kept losing my email account and crashed iGo.)
Decided to try Bepe's ROM (really like the big key video dialer
Just installed and registered all my apps (over an hour:-( and restarted.
Now I am greeted with:
MainWind.cpp: 148
Unable connect to server
I get the exclamation point (no service,) I cannot register to ATT's network and the phone dialer doesn't come up.
I have an inkling, that it maybe the Network Wizard which I ran, but I might be wrong.
Oh, and after the restart, my email account just disappeared too:-(((
I had a similar problem with the Ultra Light WWE ROM based on Dopod 3.00.707.18. Is there a problem with all of the recent Dopod-based ROMs, or is it me?

MacGuy2006 said:
I've been trying to upgrade since yesterday (from PDAVIET .13, which kept losing my email account and crashed iGo.)
Decided to try Bepe's ROM (really like the big key video dialer
Just installed and registered all my apps (over an hour:-( and restarted.
Now I am greeted with:
MainWind.cpp: 148
Unable connect to server
I get the exclamation point (no service,) I cannot register to ATT's network and the phone dialer doesn't come up.
I have an inkling, that it maybe the Network Wizard which I ran, but I might be wrong.
Oh, and after the restart, my email account just disappeared too:-(((
I had a similar problem with the Ultra Light WWE ROM based on Dopod 3.00.707.18. Is there a problem with all of the recent Dopod-based ROMs, or is it me?
Click to expand...
Click to collapse
I have the official Dopod SEA ROM and have no problems of any kind but I did have to enter the network/MMS settings to connect to the data network and send messages.

I think it is the Network Wizard. I just reinstalled everything again, then entered all the network settings manually. It works fine.
Before, i would get locked out of phone service after a reset or two, with the several Dopod-based ROMs I tried. And it seemed to happen shortly after running the Network Wizard. Updating the radio didn't help.
The only other possibility is that I opened up the Extended ROM with the Hermes utility, but I don't think I did it to all the ROMs.
I still got the disappearing email and network password thing, but tried to follow mUn's suggestion about disconnecting and soft-resetting, so we'll see if it works. Anyone with an answer why it keeps happening?
Frankly, I am a little miffed that these new Dopod ROMs are acting up on me. The old WM6 ROMs from mUn and LVSW were generally rock-solid....

Related

Upgraded ROM to 1.30.76 but PocketMSN wont work. Help please

Hi,
I recently purchased an iMate Jasjar and upgraded the old ROM to one of the latest ones I found on this site which was 1.30.76 WWE I believe with the 1.09 radio ROM. Previously PocketMSN worked flawlessly and I could send/receive thru Hotmail and log onto MSN Messenger. With the upgrade, however, I cannot do either. The device constantly says 'sign in to pocketMSN failed' and I keep trying to no avail. I can still surf and use PocketIE without a problem but only PocketMSN isn't working.
Can anyone recommend a solution?
Should I purchase PocketMSN and reinstall?
Any help is greatly appreciated.
Thank you,
Jay
the problem seems to be when I am using MSN but I leave the device idle for a few minutes and the screen blacks out. when I press the Power button to return, comm manager searches for a wireless signal and then i get signed out of pocketmsn. when i try to sign back in, it keeps saying 'sign-in failed'.
what if i upgraded to the latest Qtek ROM as I hear that's more stable. Will it work on the Imate Jasjar hassle-free?
I also had probs with MSN not even being able to log on
I fixed it with another ROM

My Artemis doesn't connect to the network anymore!

Suddenly my HTC P3300 doesn't connect to the Orange network.
I had the phone for over a month and now doesn't work anymore.
I have an italian SIM card and it works perfectly.
If I choose the automatic connection, the device keep searching forever, if I choose the manual, can't connect.
Not sure what happen here, Any ideas?
I'v tried soft, hard reset upload a new ROM, nothing!
Sounds more like a service provider issue than a phone issue.
Put the original ROM back in and then go to the nearest Orange store and tell them the problem.
I thought the same, but I think that there is something wrong with the actual device... If I try to choose any other available network that is not Tmobile, doesn't work..
Where did you buy your phone from?
It was a brand new? or 2nd hand
did U upload a pdamobizROM? If yes did U tried to restore anything from any bkup(sunnysoft, sprite, spb ....)I mean ie contacts or appointments ...?
If yes try other rom i found this prob with this rom. after restoring any bkup, it stops to connect to network(phone at least)
Yups same problem i have encountered with PDAMozbiz 1.1.2 ROM and am seeking help ..... is there anyone who can dedicate some of his precious time to help me out on this?
http://forum.xda-developers.com/showthread.php?t=295295

Has anyone figured out why gprs settings & exchange password are disappearing??

Has anyone figured out why gprs settings & exchange password are disappearing everytime you do a soft reset!!!!!! I flashed to the Dopod new SEA rom from the official HTC 1.23 for Europe. Is there a trick to stop it from disappearing after soft reset or the rom is bogus??
Gilbert
PS: I am writing from the trinity so I apologize if this topic was discussed
its not happening to me!
I am not sure if anyone else is experiencing this but I also seem to have hard-spl 1.07ds and the 3.03 that came with the dopod rom installed in my bootloader. how I know? well if I try to downgrade to the official htc 1.23, I get the 1.07ds in the bootloader and it fails, the I try to reinstall the new dopod wm6 and it works. I have super cided device & I can write to my extended rom. could this be the reason my gprs username and password and my exchange password keep disappearing afTer a soft reset? I made a hard resetusing the two buttons to get it to factory specs & it is still doing it. I have no installed programs.
i don't believe 1.07 is hard-spl, and i don't think you can actually have two spl's on there at the same time. I think one is just being overwritten by the other.
thanks for the clarification. however why in God's name am I losing my connection settings and exchange password everytime I soft reset when I have no programs installed or previously installed cooked roms. I remember the Dopod ANZ version might have had something like this and maybe dopod pulled the rom and promised to put another one in few days. I could be wrong about that.
thanks,
gilbert
I'm also experiencing the same problem and I couldn't find a solution for it.
Have you done a hard-reset after flashing?
Hi,
Gilbert said:
I am not sure if anyone else is experiencing this but I also seem to have hard-spl 1.07ds and the 3.03 that came with the dopod rom installed in my bootloader. how I know? well if I try to downgrade to the official htc 1.23, I get the 1.07ds in the bootloader and it fails, the I try to reinstall the new dopod wm6 and it works. I have super cided device & I can write to my extended rom. could this be the reason my gprs username and password and my exchange password keep disappearing afTer a soft reset? I made a hard resetusing the two buttons to get it to factory specs & it is still doing it. I have no installed programs.
Click to expand...
Click to collapse
Just discovering the flashing thing, so I'm not expert, but as far as I understand 1.07ds is not a hard-spl, but one that is pushed onto the phone by the update utility. To know what "resident" bootloader is on the phone, U need to enter the bootloader mode by pressing power+camera button plus doing a soft-reset.
Furthermore, to avoid installation of another bootloader (like the 3.03), I installed an hard-spl (olipro 1.30) and I put the phone into bootloader mode manually prior to flashing. Otherwise, the udate utility pushes the SPL 1.07ds which does not prevent the installation of the new 3.03 bootloader.
If you have the 3.03 on your device and want to downgrade, have a look at http://trinityguides.info at the Dopod WM6 Guide.
As to the disappearing Exchange password, I do not experience this pb.
Bye
yes, it is happening to me also on SEA version.
to be honest I was not overly impressed with the official SEA version so went back to AX3L's great ROM.
as for why the exchange and GPRS settings get lost, the only thing I seem to see is that it is if I installed or uninstalled some app that needed a reboot. it was not one particular app but I seemed to see the problem after installing / uninstalling themes and the kaiser home plug.
have you done any of these and seen the issue?
BMF
badmelonfarmer said:
yes, it is happening to me also on SEA version.
to be honest I was not overly impressed with the official SEA version so went back to AX3L's great ROM.
as for why the exchange and GPRS settings get lost, the only thing I seem to see is that it is if I installed or uninstalled some app that needed a reboot. it was not one particular app but I seemed to see the problem after installing / uninstalling themes and the kaiser home plug.
have you done any of these and seen the issue?
BMF
Click to expand...
Click to collapse
My pop3 account was gone after my FIRST flash with WM6 and install of the Kaiser home plugin. But then I did a hard reset, flash WM6 SEA again, and again hard reset. No problems at all anymore... Thats why I stated the hard reset
after hours of playing with the my bloody machine, i seem to have pinpointed the bloody problem. it is the new windows messenger doing all this crap. I am not sure how as I did not go through the codes but when I don't set up windows messenger and merge the contacts with the device, even if i do a thousand soft reset, the connection to the gprs automatically comes on and my exchange syncs no problem. but when you set up messenger with the device, you start getting the same crap of disappearing gprs settings and exchange password!!!
questsin said:
its not happening to me!
Click to expand...
Click to collapse
Me too.SEA version
What a total pain! Guess I'll stick with just the radio upgrade for now then.
I was going to suggest that if things seem funky after a ROM flash it is always worth trying a re-flash in case something just went a little awry first time around. But the fact others have found the same issue seems to clearly warn that this is not a one off misfortune.
Many thanks for letting everyone know... and good luck with straightening it out.
different experience
I had lost my Exchange passward and the Cingular GPRS setting info a couple of times, but after my back up today, I lost all the settings to the point that I couldn't even connect to Wi-Fi. I hadn't done a hard reset after my flash, so I am doing that now. I never set up Messenger, so I can't imagine how that could be the problem.
Would that be the same problem as the device password that some others were screaming in other threads about wrong device password?
http://forum.xda-developers.com/showthread.php?t=317841
I would guess that there's a credential database WM uses to store usernames and passwords, just like your desktop windows OS, and it either got corrupted on the memory or failed to write back to the filesystem after resetting the device.
The result would then be lost passwords, including device passwords, gprs, exchange, mails, wifi...
I have the ANZ official ROM and see the following problems (which I reported a while ago)
1) GPRS password occasionally gets blanked.
2) WEP password lost occasionally
3) Windows Live password lost occasionally .
I can't figure out what causes it- I rarely soft reset, preferring to turn off.
The biggest PITA is that my device code changed, which means I cannot use TT traffic until I get a letter from HTC.
Hmm, i'm suffering this problem also. It is mentioned in one of the various topics of the WM6 - Roms but really donĂ½ know where anymore. Anyone knows if this is possible to tackle?
Thanx!
Riel
Riel said:
Hmm, i'm suffering this problem also. It is mentioned in one of the various topics of the WM6 - Roms but really donĂ½ know where anymore. Anyone knows if this is possible to tackle?
Thanx!
Riel
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=342269
It's not the solution I guess.
I use Prophet, but this is only topic of it.
I can't make a new account, it sais 'Name exists'. But it isn't showing up, and can't find it in the registry ...
Any ideas were to remove the old ones?
No problems for a while
I followed some guidance after having the problems, and for a good many weeks it's been fine (maybe over a month).
I set all the passwords (web, WIFI) and BT pairing.
Then I turned the device off with the power buton (NOT soft reset).
SInce then, it has all stuck.

S620 OS is completely hosed

Hi - while trying to install Skype, the entire OS simply crashed. The phone does switches on but no longer finds the OS. Hence, I have no way to get an ActiveSync connection. Is there any way to install a clean O/S onto it?
Thanks in advance,
First step take your time to read the sticky located at the top of forum..
You could try an hard-reset and if all else fails flash stock ROM via bootloader, then update to ROM of choice.
Error 300
Thanks. I did. Particularly the "unbricking instructions post" from ookba.
The issue is that my Dash does not even start up. Hence, there is no way for me to get an active sync connection.
Current Status:
- phone can be started by pressing the Camera key and Power, which shows the red-green-blue screen
- phone can then be connected to the PC via a USB connection. I hear the ba-bing, but the phone does/will not establish an Active Sync (which makes sense)
- downloaded the TMO official ROM from the TMO site which is a WM6. Now, I know my phone did not previously have WM6. It probably had WM5.x but I cannot find the SHIPPED ROM anywhere.
- when I tried the RRU from TMO WM6 ROM, I got through all the way to upgrading. At which point, the mobile screen went to a white/grey with status bar stuck at 0%. But the PC application crashed and gave an error 300.
repeated the same with Kavana's ROM and the same issue.
I am looking through the forums for error 300 but most solutions seems to require an Active Sync connection. Any other suggestions?
Thanks.
have you tried hard reset? thats your best option
like stylez said, find the stock rom that was already on your phone and flash that.
i know you said you cant find it but it'll be online somewhere
look here
http://forum.xda-developers.com/showthread.php?t=381726&highlight=official+roms
The key here is that you find your original stock rom, I had the same issue a while ago and took some time to get my stock rom in the web, since the forum didn't have it. I found it in the rapidshare library http://rapidlibrary.com/index.php?q=rapidshare+library, searching under HTC s621 rom. Additionally, have u try method # 3 in the unbricking tutorial? It worked for me.

very strange problem-urgent help required

sir,
device details:-
i-mate k-jam
wm6.1
cid unlocked
radio-Version 2.71.11 [using past 1year ]
pda works well
EXCEPT
When I want to send single sms/bulk sms, pda does nothing but just shows in outbox but then after 2-3 minutes, it starts searching for network & message comes retry, after it regains network after searching (that outbox sms goes into draft) & when i try to send sms from draft , it successfully goes but then after 10 min, if i once again want to send single sms/bulk sms, all above said thing starts once again.
This started 1 month ago & continued till now,
after trying changing many different roms, it still exists.
Anybody can suggest solution for it?
Also I can`t find link for:-
G4 radio rom Version 2.69.11
&
G4 radio rom Version 3.02.11
(just to try if it works)
try installing a new ROM, my wm 6.1 started haveing problems also several months ago and i flashed my phone with the new 6.5, its more fast and easy

Categories

Resources