Related
i was playing the qpst tool and my imei and meid is gone, it seems like my qpst version is old to write imei to the mi6. but now i can not recover it to its original state. what should i do?
if i copy sdf and sde blocks back to the phone, will it fix it, or should i rewrite qcn file with the qpst tool (qcn file can also be corrupted because of the wrong version qpst tool).
i need to rewrite imei, meid to recover the phone. is there any other tool for it?
Bro, use QPST 460 ver. First dd modemst1, modemst2 and fsg partitions, restart the phone, then restore this xqcn: mega.nz/#!vQ1zyART!bXiW0JY1RGWRdHRZZGo4toUOSZiVqEJjMUdyrI8u97Q
magş said:
i was playing the qpst tool and my imei and meid is gone, it seems like my qpst version is old to write imei to the mi6. but now i can not recover it to its original state. what should i do?
if i copy sdf and sde blocks back to the phone, will it fix it, or should i rewrite qcn file with the qpst tool (qcn file can also be corrupted because of the wrong version qpst tool).
i need to rewrite imei, meid to recover the phone. is there any other tool for it?
Click to expand...
Click to collapse
Did you fix it?
Help
Hello does this solution work with such a small xqcn file ?
mekato said:
Bro, use QPST 460 ver. First dd modemst1, modemst2 and fsg partitions, restart the phone, then restore this xqcn: mega.nz/#!vQ1zyART!bXiW0JY1RGWRdHRZZGo4toUOSZiVqEJjMUdyrI8u97Q
Click to expand...
Click to collapse
Any solution ?
Hint* if you try to flash with Mi FLASH PRO tool in recovery mode it will read IMEI from the phone !!
So IMEI is still written on the phone but where and how to recover back ?!
Hi all !
So IMEI, Baseband unknown and MAC address is gone.
No any backup of it !
Have unlocked bootloader, twrp, xiaomieu rom and phone is rooted.
Following "web find" solutions when tried to backup or restore qcn with QPST (v. 2.7 474)
only getting:
"Memory backup failed"
"Disk error writing to file"
When tried to "dd if=/dev/zero of=/dev/block/sde 34 (sdf4, sdf5)
getting "no space left on device"
(no sense, only trying to wipe, not to write anything)
Also tried the same through terminal on twrp and getting same no space error !
Any idea why, or any other way to recover Imei ?
Thanks !!!!
Kiki.G said:
Hi all !
So IMEI, Baseband unknown and MAC address is gone.
No any backup of it !
Have unlocked bootloader, twrp, xiaomieu rom and phone is rooted.
Following "web find" solutions when tried to backup or restore qcn with QPST (v. 2.7 474)
only getting:
"Memory backup failed"
"Disk error writing to file"
When tried to "dd if=/dev/zero of=/dev/block/sde 34 (sdf4, sdf5)
getting "no space left on device"
(no sense, only trying to wipe, not to write anything)
Also tried the same through terminal on twrp and getting same no space error !
Any idea why, or any other way to recover Imei ?
Thanks !!!!
Click to expand...
Click to collapse
contact me to fix it: fb.me/HomXiaomiColombia
When reflashing my stock ROM after flashing a custom rom, my imei shows as 0 but i still got signal and i can still make calls, my imei just shows 0
I am running 8.1.0 with an unlocked bootloader and
I have the moto g5 cedric varient, i have a EFS and persist backup but tried to restore them just shows 0 on my imei
I have the xt1675 varienr
do you have 4G working?
maserati2011 said:
do you have 4G working?
Click to expand...
Click to collapse
4G works, just my imei shows 0, i also backed up the QCN with qfil, just need help writing to the qcn file
mattwhite7102 said:
4G works, just my imei shows 0, i also backed up the QCN with qfil, just need help writing to the qcn file
Click to expand...
Click to collapse
Reflash the the rom again through LMSA (Lenovo Moto Smart Assistant) on your pc, make sure you select rescue not upgrade, make sure to select the correct G5 code (For example: XT1676)
Also have a look at my own I F*cked up! Help me please? thread, lots of info that might help you there.
maserati2011 said:
Reflash the the rom again through LMSA (Lenovo Moto Smart Assistant) on your pc, make sure you select rescue not upgrade, make sure to select the correct G5 code (For example: XT1676)
Also have a look at my own I F*cked up! Help me please? thread, lots of info that might help you there.
Click to expand...
Click to collapse
Tried it, my imei still shows 0 but on the stock rom i still have my dhob and shob bin files and mfastboot still sees my imei, so my imei is half broken and ill also take a look on that thread
I deleted all the partitions on my g8 using qfil, now the phone has nothing but an edl mode. If someone could share a backup of the partitions that would get download mode working, I could flash a kdz I have with lgup.
Help would be appreciated
leopard_fist said:
I deleted all the partitions on my g8 using qfil, now the phone has nothing but an edl mode. If someone could share a backup of the partitions that would get download mode working, I could flash a kdz I have with lgup.
Help would be appreciated
Click to expand...
Click to collapse
So when u bring up 'manage partitions' in qfil, what do u see? Nothing? If that's the case u need the backed up partitions and the xml which has offsets etc of where to flash the images, not just the specific partitions.
cheers
AsItLies said:
So when u bring up 'manage partitions' in qfil, what do u see? Nothing? If that's the case u need the backed up partitions and the xml which has offsets etc of where to flash the images, not just the specific partitions.
cheers
Click to expand...
Click to collapse
there's nothin there in qfil, so I guess i'd need the xml also, anyone have this and could share?
i figure i can put a little work in before i throw in the cards and return the phone to amazon
leopard_fist said:
I deleted all the partitions on my g8 using qfil, now the phone has nothing but an edl mode. If someone could share a backup of the partitions that would get download mode working, I could flash a kdz I have with lgup.
Help would be appreciated
Click to expand...
Click to collapse
So I put together something that might help, but you'll probably have to make modifications to the xml to get it to work.
I don't know what the xml should look like for it to work with qfil. This is the xml generated by bkerler edl backup python scripts (with the bkerler scripts, you indicate, on the command line, where the bin files are, so it's not in the xml. But, I think the qfil interface needs that info to be in the xml. I could be wrong about that, you'll have to look at qfil and make changes to the xml if needed).
Also, the xml for luns 1 and 2 files are accurate, but not the xml for lun4. You would also need to edit out all the xml restore in rawprogram4 to only include the files for that lun (to get lgup - boot, abl, laf, and gpt*4).
Lastly, this is from a sprint backup, not sure that matters much except in that there is no kdz for sprint, so not sure how your device will respond in lgup if u use these and then try to lgup a vzw kdz (or any kdz), since there's no totc file to 'ID mismatch' with...
good luck
leopard_fist said:
there's nothin there in qfil, so I guess i'd need the xml also, anyone have this and could share?
i figure i can put a little work in before i throw in the cards and return the phone to amazon
Click to expand...
Click to collapse
wow, return the phone 'in the condition it was in when received' is usually a prerequisite right? In other words... not bricked?
good luck with that too.
AsItLies said:
wow, return the phone 'in the condition it was in when received' is usually a prerequisite right? In other words... not bricked?
good luck with that too.
Click to expand...
Click to collapse
thanks for your time - i'll give it a try when i get home from work this evening, even though it looks to be over my head maybe i can figure it out.
it's actually a sprint phone, though i know a way to crossflash anyway.
you figure i can't return the phone? i just spent 200 bucks on this phone a few days ago, i hope thats not the case
the thing is - my jobs getting ready to send me out of state for a new position. my present phones old, slow, and the screens cracked, so i thought id start things off by getting myself a decent phone and working on setting it up - at present though ive just got an unresponsive piece of plastic.
ive rooted many phones in my day, but this one got me, what can i say
leopard_fist said:
the thing is - my jobs getting ready to send me out of state for a new position. my present phones old, slow, and the screens cracked, so i thought id start things off by getting myself a decent phone and working on setting it up - at present though ive just got an unresponsive piece of plastic.
ive rooted many phones in my day, but this one got me, what can i say
Click to expand...
Click to collapse
Hey it's not my place to tell you what to do. But I can tell you, personally, if I screw up, I take responsibility for it.
leopard_fist said:
I deleted all the partitions on my g8 using qfil, now the phone has nothing but an edl mode. If someone could share a backup of the partitions that would get download mode working, I could flash a kdz I have with lgup.
Help would be appreciated
Click to expand...
Click to collapse
Just follow this thread.
netmsm said:
Just follow this thread.
Click to expand...
Click to collapse
netmsm, thanks for the reply - if I follow the instructions in the thread you linked, is it true that i'll have no imei and serial number on the phone after the process?
thanks again
leopard_fist said:
netmsm, thanks for the reply - if I follow the instructions in the thread you linked, is it true that i'll have no imei and serial number on the phone after the process?
thanks again
Click to expand...
Click to collapse
That's true. You lose IMEI when you erase all partitions. Except, you have crated a backup of Modemst(1 or 2) or FSG partitions so you can restore them, but after recovering from hard brick. So first recover phone following instructions then restore Modemst 1 and 2 or just the FSG.
If your phone is factory unlocked version and you have no backup maybe we can repair IMEI, maybe! Just recover the phone for now.
netmsm said:
That's true. You lose IMEI when you erase all partitions. Except, you have crated a backup of Modemst(1 or 2) or FSG partitions so you can restore them, but after recovering from hard brick. So first recover phone following instructions then restore Modemst 1 and 2 or just the FSG.
If your phone is factory unlocked version and you have no backup maybe we can repair IMEI, maybe! Just recover the phone for now.
Click to expand...
Click to collapse
I have backups of the following files - would the imei/serial info be contained in any of these?
thank you
ftm
modem_a
modem_b
op_a
op_b
sid_a
sid_b
abl_a
abl_b
boot_a
boot_b
leopard_fist said:
I have backups of the following files - would the imei/serial info be contained in any of these?
thank you
ftm
modem_a
modem_b
op_a
op_b
sid_a
sid_b
abl_a
abl_b
boot_a
boot_b
Click to expand...
Click to collapse
Nope, sorry to say. FTM keeps identity data as a temp place from which IMEI cannot be restored. However, you can find the original IMEI from FTM. You need a box to repair the IMEI. The only tool that can repair LG SDM855 phones' IMEI is Octopus. So, you know what to do, I guess ^_^
If you accidentally formatted your device , then how to restore imei
How to deal with: Download not complete error
Sn writer
Elaborate more with Download part
Download Not Complete: something blah blah blah after 10s, 0*92655 something something...
Sn writer / Maui Meta doesn't work for null imei for realme3.
Thanx
The device on which I am flashing the firmware is REALME 3, I used SP Flash tool for flashing, while flashing with SP Flash flash tool, the tool show EMMC unknown,but the flashing completes successfully,
then after pressing power ON, this message appears at the bottom ,
Download Not Complete! Please press Volume+ and power key for 10s to power off. Then download again. Otherwise will block here 60s until shutdown automatically. error code : 0*9925669( I can't see the last digit bcoz of the glass cover).
PLS GUIDE.THNX
Give possible solution for imei
@yas8say , has provided possible solution, I will try that next time I'll get this error. In thread brick repair by @ATDteam .
If you can use SP flash tools, SN writer DOES work on your fone, but it's figuring out a certain timing and sequence of events. that prove my point. Your at the point you need to be, it's waiting on you doing what I'm trying to say... your too demanding wanting the quick fix...
Everytime you post pauses me in case I need to change what I write to you, so slow down, your distracting me lol
Sn Writer is actually a pain to use, and there are many versions. But I learnt a sneaky fast path with it's appearing to not work. It does work, but kind of in reverse of what you think it does.
Sn Writer, strange but true, calls 'serial' as in serial number, 'barcode' in some versions, so some think because they cant see 'serial' that it wont work. I know because at first, I did. Took me a while to learn this.
Load up Sn Writer, it'll ask to load a file, the window that opens should be where you see MTK DA ALL IN bin, select it. Then choose scatterfile from stock firmware.
Now set correct attestation keys found in stock rom, your aftersales stock, with your attestation keys /google keys blah blah...
You then have to choose what you want to flash. If you see serial, that is NOT what you want to flash, you have to flash BARCODE! (your fones serial number) I know you said IMEI, but in order, SN writer flashes BARCODE before IMEI 1, so you MUST flash serial and mac PACKAGE given in stock rom?
So what I do is open the window to type in BARCODE box, my serial number.
Imei 1 is obvious, but you MUST do imei 2 as well, or it will add a few digits to imei 1's mac, put it in imei 2 that may not corespond to your attestation key.
Over to fone.
I turn my fone OFF, hit start in SNWriter, and plug phone into pc, and wait. You can tie your hands to your chair for a min, because if you interupt this TIMING...
Just when you think it wont work, folks give up. Wait that wee bit longer... it will show pass or fail. If its all genuine stock, it cant fail, only impatience caused by not knowing this sequence, and SN's bug-inesss
I'm too tired right now, and I see you posting again lol, my eyes are dry and its sleep time, and since you think it wont work, I'll catch up later today on this post, beacuse I'm gettin ratty with myself lol
Patience.. I'll be back...
Ank Sak said:
@yas8say , has provided possible solution, I will try that next time I'll get this error. In thread brick repair by @ATDteam[/USE
[/QUOTE]
Click to expand...
Click to collapse
HI
If you have successful in booting up your device try rooting it with magisk and find the .bin file in /data/nvram and edit it !
yas8say said:
HI
If you have successful in booting up your device try rooting it with magisk and find the .bin file in /data/nvram and edit it !
Click to expand...
Click to collapse
Ank Sak said:
Give possible solution for imei
Click to expand...
Click to collapse
I have faced this too, but luckily i had already taken a backup from recovery of nvram ,nvcfg, nvdata partitions .After flashing the recovery i just restored the partitions.
SO, GUYS IF YOU CAN BOOT INTO RECOVERY FIRST THING YOU HAVE TO DO BEFORE FLASHING ANY PARTITION IS TO MAKE A BACKUP OF THEM
yas8say said:
HI
If you have successful in booting up your device try rooting it with magisk and find the .bin file in /data/nvram and edit it !
Click to expand...
Click to collapse
The unique problem I am facing is that I was able to flash the firmware, but I couldn't do anything after that because I did format which resulted in """ null imei """ without it the in-depth test app doesn't work, so the after process of bootloader unlocking and then rooting is unachievable, I can't downgrade with official ozip file given in realme website, I did that and it resulted in hard brick( basically without unlocking bootloader I can't do sh*t) , my device is up & running but without imei the further processes are stalled, I will try the method of using sn writer mentioned here..the repair guy even mentioned something about bin fine not found so he couldn't write imei, I have successfully used Maui Meta & SN Writer to write imei of my other mediatek chip containing device , but it didn't worked on realme3, yes you may have solved my problem of "" Download not Complete"" I have posted two pictures in the brick repair thread by @ATDteam . Thanx.
I will try to repair imei and post the outcome here.
2 years ago I formatted by other mediatek chip device lenevo and it did show NVRam error in wifi, after repairing imei it didn't show , & now this mediatek chip device realme does show NVRam error in wifi :: -- NVRAM WARNING: Err =0*10
Ank Sak said:
The unique problem I am facing is that I was able to flash the firmware, but I couldn't do anything after that because I did format which resulted in """ null imei """ without it the in-depth test app doesn't work, so the after process of bootloader unlocking and then rooting is unachievable, I can't downgrade with official ozip file given in realme website, I did that and it resulted in hard brick( basically without unlocking bootloader I can't do sh*t) , my device is up & running but without imei the further processes are stalled, I will try the method of using sn writer mentioned here..the repair guy even mentioned something about bin fine not found so he couldn't write imei, I have successfully used Maui Meta & SN Writer to write imei of my other mediatek chip containing device , but it didn't worked on realme3, yes you may have solved my problem of "" Download not Complete"" I have posted two pictures in the brick repair thread by @ATDteam . Thanx.
I will try to repair imei and post the outcome here.
Click to expand...
Click to collapse
If you want to unlock bootloader just use mtkclient ,its very simple.
And if you want my imei files i can provide you but you got to have twrp installed.BTW where are you from?
Tried mtkclient & mtksu app , didn't work, first I will write imei, then use in-depth test, then unlock bootloader, then downgrade, then root using mtksu.. fingers crossed
Ank Sak said:
Tried mtkclient & mtksu app , didn't work, first I will write imei, then use in-depth test, then unlock bootloader, then downgrade, then root using mtksu.. fingers crossed
Click to expand...
Click to collapse
What error did you faced when using mtkclient?
yas8say said:
What error did you faced when using mtkclient?
Click to expand...
Click to collapse
I cannot boot in fastboot mode ( I forgot to tell , in realme )
Mtk client:: shows this...
Daxflash - uploading stage 1 from mtkallinone_ da_5.2136.bin
Preloader
Preloader- [lib] : ?[ 31mError on DA_send cmd?[0m
Daxflash
Daxflash- [lib] : ?[31mError on sending DA.?[0m
Main
Main - [lib] : ?[31mError uploading da?[0m
Device formats,
First time some error
Now I ran second time python mtk xflash seccfg unlock
And now bootloader is unlocked !!! Cheers
I don't want to brick and I want to root , what must I do , pls give in steps.. Thnx
Should I directly install twrp img then magisk zip??
Orange state
Device is unlocked blah blah blah( same as lenevo)
But no fastboot mode
When use adb reboot bootloader
This comes up
The serial is not match
Fastboot_unlock_verify fail
Should I try using in-depth test app??
Ank Sak said:
Should I directly install twrp img then magisk zip??
Orange state
Device is unlocked blah blah blah( same as lenevo)
But no fastboot mode
When use adb reboot bootloader
This comes up
The serial is not match
Fastboot_unlock_verify fail
Should I try using in-depth test app??
Click to expand...
Click to collapse
TRY this:
python mtk w recovery recovery_name.img
then boot into recovery.
yas8say said:
TRY this:
python mtk w recovery recovery_name.img
then boot into recovery.
Click to expand...
Click to collapse
My device is realme3, it's on Android10 c.17, will I will be able to root with magisk ? Ok I will try.
No straight business,
Ok i tried, gave same error preloader dax main. .., so I switched off , as soon as the device turns off n pressed all three buttons to go into brom mode, the other cmd with python command ran and wrote twrp Spartan recovery,, then switched on, key combo didn't work, bcoz it was showing ' the serial is not match......' so I typed adb reboot recovery, it booted to realme UI recovery.
Surely have to downgrade to Android 9 to root & install recovery
Hi everyone, days ago I posted on the forum that I had a bootloop, I could not enter fastboot or recovery, well, I managed to install the rom by sp flash tool without errors, but now I get the error "nv data is corrupted" as seen in the video that I attach, anyone know of a viable solution? What is free and do not have any other problem and my phone back to normal? Because I can enter fastboot and maybe download or twrp or download pixel experience or a rom, What do you recommend?
Your browser is not able to display this video.
I have the same problème did u solve it ?
with me we are in 3, please share if you find something !
you reached a solution so wished and few seconds later you get into nightmare back again !
Same here, but on redmi 9. I guess i made a mistake thaough, i tried to install EU rom and then this happened. Did you make this mistake too?
after otg update of miui 13 it happens. maybe @VD171 help us ?
same here
after updates got a boot loop with no access to recovery or fastboot,
after successful flashing, i got NV corruption.
every year a redmi phone with updates problem
redmi phones are a mess with updates
coliotte said:
same here
after updates got a boot loop with no access to recovery or fastboot,
after successful flashing, i got NV corruption.
every year a redmi phone with updates problem
redmi phones are a mess with updates
Click to expand...
Click to collapse
Me too
We need to send a message to Xiaomi support and let them know about this issue so that they can provide a solution for this problem in the future. They are the producer of this phone and can provide a remote tool for nvram repair
Redmi note 9 merlin will receive the MIUI 14 update and still supported by Xiaomi
Found a good solution I sold it to a repair shop for parts and got an iPhone already updated that iPhone and guess what IMEI is still there .
Recovered by simple way first install Engineering rom after that downgrade to 12.5
devjmi said:
Recuperado de manera simple primero instalar la ROM de ingeniería después de esa degradación a 12.5
Click to expand...
Click to collapse
Have you tried this method?
I already put it to the test to see if it revived my redmi note 9 but apparently it continues the same without any result, what's more, it is not capable of flashing the engineering ROM either.
coliotte said:
same here
after updates got a boot loop with no access to recovery or fastboot,
after successful flashing, i got NV corruption.
every year a redmi phone with updates problem
redmi phones are a mess with updates
Click to expand...
Click to collapse
Yes I did, you can try searching how to flash engineering rom on dead phone on youtube
Good news people, I found how to revive our bricks with nv data corrupted, it is a simple solution, but that is if our device is going to be left without IMEI, or baseband, but it will turn on and work again, staying with MIUI 11 as a system, in the next comment I will leave the step by step and from now on I will continue investigating how to restore the IMEI and the base band of the equipment.
Relive redmi note 9 / redmi 10x 4G from NV DATA CORRUPTED error
STEP 1:
We download the file from the link that I am going to attach, there we unzip it and leave it in a location on our PC that we want, after these we perform the ByPass to be able to flash with the SP Flash Tool) if you do not have the ByPass I leave the link, remember that for it to run you have to download Python).
download links:
Necessary files: https://drive.google.com/file/d/1dUy8j9jHofv0NoYeyYWNiwFnP-n04QGz/view
ByPass: https://www.mediafire.com/folder/a68qyu0m7mr2i/AUTH+BYPASS+V3
Once the files have been extracted, we prepare the device (VERY IMPORTANT WE USE THE SP FLASH TOOL VERSION THAT COMES IN THE ZIP FILE, IF WE USE ANOTHER DIFFERENT VERSION IT WILL NOT FLASH THE DEVICE)
We perform the ByPass of the device (vol - y and connect the USB cable with the phone turned off).
Once the ByPass is done, what we do is open the sp flash tool and from there we load the Scatter that is in the folder of step 1 and then we load the DA files that are in the sp flash tool folder that was with the file Zip that we downloaded, from there we click on download and the flashing will begin (If it asks us for AUTH file, it means that the ByPass has not been carried out since that file is not required for flashing)
After those files are flashed we proceed to open the en sp flash tool the Scatter that is in the folder of step 2, and before flashing we must change the option from Download Only to Firmware Update if we do not do this it will give us error during flashing, and that's it, our redmi note 9 / redmi 10X 4G will have already revived from that NV DATA CORRUPTED error, and as I indicated at the beginning, the phone revives with MIUI 11 without baseband or IMEI, if I manage to find out how restore the IMEI and the base band I will be informing you, have an excellent day and I hope this method works for you, it worked for me
(Files from HALABTECH)
mrdeivid said:
Relive redmi note 9 / redmi 10x 4G from NV DATA CORRUPTED error
STEP 1:
We download the file from the link that I am going to attach, there we unzip it and leave it in a location on our PC that we want, after these we perform the ByPass to be able to flash with the SP Flash Tool) if you do not have the ByPass I leave the link, remember that for it to run you have to download Python).
download links:
Necessary files: https://drive.google.com/file/d/1dUy8j9jHofv0NoYeyYWNiwFnP-n04QGz/view
ByPass: https://www.mediafire.com/folder/a68qyu0m7mr2i/AUTH+BYPASS+V3
Once the files have been extracted, we prepare the device (VERY IMPORTANT WE USE THE SP FLASH TOOL VERSION THAT COMES IN THE ZIP FILE, IF WE USE ANOTHER DIFFERENT VERSION IT WILL NOT FLASH THE DEVICE)
We perform the ByPass of the device (vol - y and connect the USB cable with the phone turned off).
Once the ByPass is done, what we do is open the sp flash tool and from there we load the Scatter that is in the folder of step 1 and then we load the DA files that are in the sp flash tool folder that was with the file Zip that we downloaded, from there we click on download and the flashing will begin (If it asks us for AUTH file, it means that the ByPass has not been carried out since that file is not required for flashing)
After those files are flashed we proceed to open the en sp flash tool the Scatter that is in the folder of step 2, and before flashing we must change the option from Download Only to Firmware Update if we do not do this it will give us error during flashing, and that's it, our redmi note 9 / redmi 10X 4G will have already revived from that NV DATA CORRUPTED error, and as I indicated at the beginning, the phone revives with MIUI 11 without baseband or IMEI, if I manage to find out how restore the IMEI and the base band I will be informing you, have an excellent day and I hope this method works for you, it worked for me
(Files from HALABTECH)
Click to expand...
Click to collapse
Helo, what's the pass for the file? Thank's
Password plz
mrdeivid said:
Relive redmi note 9 / redmi 10x 4G from NV DATA CORRUPTED error
STEP 1:
We download the file from the link that I am going to attach, there we unzip it and leave it in a location on our PC that we want, after these we perform the ByPass to be able to flash with the SP Flash Tool) if you do not have the ByPass I leave the link, remember that for it to run you have to download Python).
download links:
Necessary files: https://drive.google.com/file/d/1dUy8j9jHofv0NoYeyYWNiwFnP-n04QGz/view
ByPass: https://www.mediafire.com/folder/a68qyu0m7mr2i/AUTH+BYPASS+V3
Once the files have been extracted, we prepare the device (VERY IMPORTANT WE USE THE SP FLASH TOOL VERSION THAT COMES IN THE ZIP FILE, IF WE USE ANOTHER DIFFERENT VERSION IT WILL NOT FLASH THE DEVICE)
We perform the ByPass of the device (vol - y and connect the USB cable with the phone turned off).
Once the ByPass is done, what we do is open the sp flash tool and from there we load the Scatter that is in the folder of step 1 and then we load the DA files that are in the sp flash tool folder that was with the file Zip that we downloaded, from there we click on download and the flashing will begin (If it asks us for AUTH file, it means that the ByPass has not been carried out since that file is not required for flashing)
After those files are flashed we proceed to open the en sp flash tool the Scatter that is in the folder of step 2, and before flashing we must change the option from Download Only to Firmware Update if we do not do this it will give us error during flashing, and that's it, our redmi note 9 / redmi 10X 4G will have already revived from that NV DATA CORRUPTED error, and as I indicated at the beginning, the phone revives with MIUI 11 without baseband or IMEI, if I manage to find out how restore the IMEI and the base band I will be informing you, have an excellent day and I hope this method works for you, it worked for me
(Files from HALABTECH)
Click to expand...
Click to collapse
Pass- HALAB_HT_TECH
I have 3 Solutions for this problem :
1) - After flash firmware to latest MIUI with official file, use Unlocktool [https://unlocktool.net/] to flash the firmware and restore nvram data (if already backup the NVRAM config)
VIDEO :
- IF NOT use Pandora tool [https://z3x-team.com/products/pandora/] (for repair imei (if didn't have nvram data *but need to search for new IMEI)
VIDEO :
- THIS IS FREE VERSION FOR REPAIR IMEI
VIDEO :
2) (if still bootloop or stuck) Remove plate
video :
OR
3) This is the last options, need to disassemble the device, and replace the capacitor next to CPU
VIDEO :
i hope that help
HackerSecMY said:
i hope that help
Click to expand...
Click to collapse
thanks man, but I have a question, the unlock tool is paid. Second, if I do and fix that, can I go back to MIUI 13?
mrdeivid said:
Relive redmi note 9 / redmi 10x 4G from NV DATA CORRUPTED error
STEP 1:
We download the file from the link that I am going to attach, there we unzip it and leave it in a location on our PC that we want, after these we perform the ByPass to be able to flash with the SP Flash Tool) if you do not have the ByPass I leave the link, remember that for it to run you have to download Python).
download links:
Necessary files: https://drive.google.com/file/d/1dUy8j9jHofv0NoYeyYWNiwFnP-n04QGz/view
ByPass: https://www.mediafire.com/folder/a68qyu0m7mr2i/AUTH+BYPASS+V3
Once the files have been extracted, we prepare the device (VERY IMPORTANT WE USE THE SP FLASH TOOL VERSION THAT COMES IN THE ZIP FILE, IF WE USE ANOTHER DIFFERENT VERSION IT WILL NOT FLASH THE DEVICE)
We perform the ByPass of the device (vol - y and connect the USB cable with the phone turned off).
Once the ByPass is done, what we do is open the sp flash tool and from there we load the Scatter that is in the folder of step 1 and then we load the DA files that are in the sp flash tool folder that was with the file Zip that we downloaded, from there we click on download and the flashing will begin (If it asks us for AUTH file, it means that the ByPass has not been carried out since that file is not required for flashing)
After those files are flashed we proceed to open the en sp flash tool the Scatter that is in the folder of step 2, and before flashing we must change the option from Download Only to Firmware Update if we do not do this it will give us error during flashing, and that's it, our redmi note 9 / redmi 10X 4G will have already revived from that NV DATA CORRUPTED error, and as I indicated at the beginning, the phone revives with MIUI 11 without baseband or IMEI, if I manage to find out how restore the IMEI and the base band I will be informing you, have an excellent day and I hope this method works for you, it worked for me
(Files from HALABTECH)
Click to expand...
Click to collapse
Thank you so much! I've spent months trying to find a solution and this one was the only one that worked
I've still got the IMEI issue, but at least it works now.