Hello everyone, I've been trying to unbrick my ZenFone 2 ZE550ML for at least 5 hours...
(first, the small history...)
I've a french ASUS ZenFone 2 ZE550ML (Z008D) with 2 Go of RAM running latest Lollipop official ROM (I never unlocked bootloader or rooted it)
I suscribed to Asus beta tester program on ZenTalk forum, so I received the Marshmallow upgrade via official OTA last night.
Everything updated normally, I had enough space, update has been completed, I saw the ASUS logo on dark background because it's not unlocked, I saw the message "Optimizing apps..."(ART compiling)... and I successfully booted to Marshmallow... but just one time.
What happened is that my ZenFone 2 is... really... slow... and... with... Marshmallow... it... had... the... same.... slowness... than... with... Lollipop :silly:
And, after playing around with Marshmallow around ten minutes (apps were updating through Play Store), my phone hung, only because of slowness. I could make it sleep (screen turning on/off, that's all, no lock screen), and I could just access to shutdown/reboot menu if I press 3 seconds the Power button. But it was frozen, like it often did in Lollipop.
I waited 15 minutes, because I thought turning off while updating apps like Google Play Services was not a brilliant idea. After 15 minutes of waiting, still frozen, but even more frozen : no power menu, and orange LED was still ON even after disconnecting the charger. I decided to reset my ZenFone 2 by pressing power button 10 seconds.
And... I rebooted it => vibration, then immediately USB logo (when POWER or POWER+UP VOLUME). Nothing more after that. No LED while charging (if I plug it to a charger, it boot loop with USB logo). It's very frustrating because... I saw ASUS logo just before optimization, and I stopped it AFTER update, not during :crying:
(now what I tried)
Today I tried to apply this guide : http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
I managed to install every driver, I downloaded every file/image I could...
Because of USB logo, my device is always recognized as a Moorefield device with known driver
Following the guide, I sent to my phone the basic 4-coulour bootloader using xFSTK, no problem
Here is the problem now : I've a working fastboot menu, fastboot is recognized by my computer, BUT almost every fastboot command fails, because my serial number was set to 0123456789ABCDEF :crying:
-> Fastboot error is systematically : FAILED (remote: flash_cmds error! (this happens after successfully downloading to phone, but it's not applying)
and, I tried "fastboot erase cache" :
******** Did you mean to fastboot format this partition?
erasing 'cache'...
FAILED (status read failed (Too many links))
I never had any software mess in my phone :crying:
So I don't know what to do, because I would like to flash only splashscreen, recovery and boot if possible, I don't want to lose data
I'm actually downloading a RAW for WW_ZE550ML_2.20.40.149 that I'll sideload with Asus Flash Tool (without wiping data) if it's the only way to do
Where can I find working images for fastboot that can be flashed on a generic serial number?
Thanks for your answers
Edit 1 : OH WAIT... The fastboot screen on my ZenFone 2 Z008 says :
PRODUCT_NAME - Z00A
VARIANT - ASUS_Z00A
WTF ASUS ?!?!?!?!
The ONLY things I did are : OTA update to Marshmallow (I never had OTA issues before) and sending through xFSTK the FW DNx, IFWI and OS Images FOR ZE550ML given in the guide... What happened?! Please please please, can somebody give me the right files? Thank you ^^
(sorry for eventual bad english, I'm a tired french)
Have you tried to re flash fastboot (fastboot flash droidboot.img)?
About the serial number, I think 0123..DEF is normal because I mine is like yours, too. But everything is fine.
fanfan54 said:
Hello everyone, I've been trying to unbrick my ZenFone 2 ZE550ML for at least 5 hours...
(first, the small history...)
I've a french ASUS ZenFone 2 ZE550ML (Z008D) with 2 Go of RAM running latest Lollipop official ROM (I never unlocked bootloader or rooted it)
I suscribed to Asus beta tester program on ZenTalk forum, so I received the Marshmallow upgrade via official OTA last night.
Everything updated normally, I had enough space, update has been completed, I saw the ASUS logo on dark background because it's not unlocked, I saw the message "Optimizing apps..."(ART compiling)... and I successfully booted to Marshmallow... but just one time.
What happened is that my ZenFone 2 is... really... slow... and... with... Marshmallow... it... had... the... same.... slowness... than... with... Lollipop :silly:
And, after playing around with Marshmallow around ten minutes (apps were updating through Play Store), my phone hung, only because of slowness. I could make it sleep (screen turning on/off, that's all, no lock screen), and I could just access to shutdown/reboot menu if I press 3 seconds the Power button. But it was frozen, like it often did in Lollipop.
I waited 15 minutes, because I thought turning off while updating apps like Google Play Services was not a brilliant idea. After 15 minutes of waiting, still frozen, but even more frozen : no power menu, and orange LED was still ON even after disconnecting the charger. I decided to reset my ZenFone 2 by pressing power button 10 seconds.
And... I rebooted it => vibration, then immediately USB logo (when POWER or POWER+UP VOLUME). Nothing more after that. No LED while charging (if I plug it to a charger, it boot loop with USB logo). It's very frustrating because... I saw ASUS logo just before optimization, and I stopped it AFTER update, not during :crying:
(now what I tried)
Today I tried to apply this guide : http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
I managed to install every driver, I downloaded every file/image I could...
Because of USB logo, my device is always recognized as a Moorefield device with known driver
Following the guide, I sent to my phone the basic 4-coulour bootloader using xFSTK, no problem
Here is the problem now : I've a working fastboot menu, fastboot is recognized by my computer, BUT almost every fastboot command fails, because my serial number was set to 0123456789ABCDEF :crying:
-> Fastboot error is systematically : FAILED (remote: flash_cmds error! (this happens after successfully downloading to phone, but it's not applying)
and, I tried "fastboot erase cache" :
******** Did you mean to fastboot format this partition?
erasing 'cache'...
FAILED (status read failed (Too many links))
I never had any software mess in my phone :crying:
So I don't know what to do, because I would like to flash only splashscreen, recovery and boot if possible, I don't want to lose data
I'm actually downloading a RAW for WW_ZE550ML_2.20.40.149 that I'll sideload with Asus Flash Tool (without wiping data) if it's the only way to do
Where can I find working images for fastboot that can be flashed on a generic serial number?
Thanks for your answers
Edit 1 : OH WAIT... The fastboot screen on my ZenFone 2 Z008 says :
PRODUCT_NAME - Z00A
VARIANT - ASUS_Z00A
WTF ASUS ?!?!?!?!
The ONLY things I did are : OTA update to Marshmallow (I never had OTA issues before) and sending through xFSTK the FW DNx, IFWI and OS Images FOR ZE550ML given in the guide... What happened?! Please please please, can somebody give me the right files? Thank you ^^
(sorry for eventual bad english, I'm a tired french)
Click to expand...
Click to collapse
After flashing Z008 with xFSTK IAW the procedure you tried, the product name in fastboot screen is shown as ASUS_Z00A. After flashing with Asus flashtool, the fastboot screen says correct product number Z008 and corect serial number. :good:
I tried to flash boot.img, droidboot.img, system.img and recovery.img because I did not want to lose my data. Unfortunately, my Z008 did not accept the fastboot commands just like you, so I wiped my data. :crying:
It seems that this guy has succeeded to unbrick Z00A without losing his data. I have not tried this procedure in my Z008 using Z008 raw file yet, so I don't know if this is effective for Z008.
http://forum.xda-developers.com/showpost.php?p=67474121&postcount=210
Serial number restored by Asus Flash Tool, now I can flash with fastboot
Hakataben said:
After flashing Z008 with xFSTK IAW the procedure you tried, the product name in fastboot screen is shown as ASUS_Z00A. After flashing with Asus flashtool, the fastboot screen says correct product number Z008 and corect serial number. :good:
I tried to flash boot.img, droidboot.img, system.img and recovery.img because I did not want to lose my data. Unfortunately, my Z008 did not accept the fastboot commands just like you, so I wiped my data. :crying:
It seems that this guy has succeeded to unbrick Z00A without losing his data. I have not tried this procedure in my Z008 using Z008 raw file yet, so I don't know if this is effective for Z008.
http://forum.xda-developers.com/showpost.php?p=67474121&postcount=210
Click to expand...
Click to collapse
Hello,
Thanks for your answers
I let going Asus Flash Tool for 6 hours, I saw in the Task Manager and on my Zenfone that it used fastboot2 to erase partitions.
Phone said O.K
But it's stuck for 6 hours on a500cgfastboot (these files are here : C:\Program Files (x86)\ASUS\ASUS Flash Tool\Google)
So I think I'll have to reboot phone and PC and retry (I checked integrity of the raw with 7-zip (the raw file is actually a zip file which is unzipped in the folder %USERPROFILE%\.fbrawtempdir) but I'll re-download it...)
Maybe serial number just changed...
Edit after reboot : SO COOL
I discovered that a500cgfastboot was stuck because................................... by erasing some partions, fastboot2 restored the right serial number (I had to restart fastboot to see back my legit serial number)... and it restored product name to Z008
And because a500cgfastboot (and other command ran by Asus Flash Tool) have the old serial 0123456789ABCDEF for argument, a500cgfastboot was no longer finding my phone
I'll retry downloading my img files with fastboot... But I saw Asus Flash Tool cleaned system partition too, but I'll try...
Edit after flashing with fastboot
With the right serial number, everything flashed perfectly with fastboot (but there's one problem : in the Mega folder, there is not the system image for Marshmallow)
so, without system image, my phone boots (ASUS logo, etc...) BUT nothing happens after logo because fastboot2 wiped system :crying: :crying:
I have still access to Fastboot, like before bricking (POWER + VOL UP) (but I can't figure out how to enter in recovery, I've just the droid bot with exclamation mark)
(it's unbricked but no system)
fanfan54 said:
Hello,
Thanks for your answers
I let going Asus Flash Tool for 6 hours, I saw in the Task Manager and on my Zenfone that it used fastboot2 to erase partitions.
Phone said O.K
But it's stuck for 6 hours on a500cgfastboot (these files are here : C:\Program Files (x86)\ASUS\ASUS Flash Tool\Google)
So I think I'll have to reboot phone and PC and retry (I checked integrity of the raw with 7-zip (the raw file is actually a zip file which is unzipped in the folder %USERPROFILE%\.fbrawtempdir) but I'll re-download it...)
Maybe serial number just changed...
Edit after reboot : SO COOL
I discovered that a500cgfastboot was stuck because................................... by erasing some partions, fastboot2 restored the right serial number (I had to restart fastboot to see back my legit serial number)... and it restored product name to Z008
And because a500cgfastboot (and other command ran by Asus Flash Tool) have the old serial 0123456789ABCDEF for argument, a500cgfastboot was no longer finding my phone
I'll retry downloading my img files with fastboot... But I saw Asus Flash Tool cleaned system partition too, but I'll try...
Edit after flashing with fastboot
With the right serial number, everything flashed perfectly with fastboot (but there's one problem : in the Mega folder, there is not the system image for Marshmallow)
so, without system image, my phone boots (ASUS logo, etc...) BUT nothing happens after logo because fastboot2 wiped system :crying: :crying:
I have still access to Fastboot, like before bricking (POWER + VOL UP) (but I can't figure out how to enter in recovery, I've just the droid bot with exclamation mark)
(it's unbricked but no system)
Click to expand...
Click to collapse
If you want to use Marshmallow, I recommend to flash pre-rooted lollipop first, then to flash marshmallow. In your situation, you should unbrick your Z008 at first. After that, you can change system to Marshmallow easily.
Pre-rooted Z008 systems are here. http://forum.xda-developers.com/zenfone2/development/rom-pre-root-img-t3079590
In my case, I needed to have rooted and bootloader-unlocked again to enter in recovery.
Yay!
ASUS Flash Tool flashed the 2.20.40.149 successfully
It's saying "Optimizing app 45 of 119", but I think I had 179 when upgrading to Marshmallow...
And my Android was in french before. But I think I'll be able to fix this
I'll check soon if I've still all my data and apps...
(also, I tried to film everything, if it works I could eventually upload a video tutorial )
Thanks
Another problem... Edit 1
Android boots, I haven't any installation "Welcome" popup because I did not reset it, but as a consequence it crashes at start :
"Unfortunately, android.process.media stopped"
"Unfortunately, android.process.acore stopped"
And it reboots
Maybe it's because these are Marshmallow apps... Will I have to reset it?
Or where can I find system.img for Marshmallow?
Edit 2 Just managed to access to recovery menu
Definitely solved
Solved without losing any data (except settings of some non-system apps)
Hello,
I found on ZenTalk (this thread : http://www.asus.com/zentalk/forum.php?mod=redirect&goto=findpost&ptid=78184&pid=392686) a working link to Latest Marshmallow sideload zip for ZE550ML OR ZE551ML. It was the right file, finally.
ZF2/ZE550ML/Z008/Android 6.0.1/WW-4.21.40.54 ~ download --> here.
ZF2/ZE551ML/Z00A/Android 6.0.1/WW-4.21.40.61 ~ download --> here.
Click to expand...
Click to collapse
I sideloaded this file using adb and recovery mode, it worked PER-FECT-LY : my phone just rebooted without any problem, like before the problem. And with latest Marshmallow obviously : I immediately received messages, could access to my pictures, apps, with the same settings than before, in French (just one thing: settings for some non-system apps are reset)
Here is guide of everything I did to unbrick a Marshmallow ZE550ML stuck on USB logo with no bootloader :
(Note: I recommend you to charge your ZenFone for a few hours as soon as you'll get fastboot menu at step 1, so it will not shutdown... Even if it's not turning on the orange LED, it's charging )
(Note also that these are the steps I had to do in order to unbrick MY phone without losing data and installing Marshmallow. For your phone some steps might be unnecessary, if you're lucky... I know this is a very long guide but I had to do this in MY case)
1. Flash basic bootloader with xFSTK Downloader to boot fastboot
I had, first, to switch to advanced startup with support for unsigned drivers (video tutorial here),
install Asus USB drivers (link to Asus USB drivers here - note: video tutorial to install drivers from inf (repeat for every device available : ADB Interface, Bootloader Interface, etc...) )
and IntelSocUSB driver (link to IntelSocUSB driver 1.2.0 - Note: Before finishing IntelSocUSB setup it will ask you to configure a device : you'll have to connect your ZenFone 2 using an USB cable to your computer, while it's displaying USB logo, and WAIT FOR DETECTION IN Device Manager as "Moorefield device" under "Intel Soc" section),
to flash a fastboot bootloader (link to xFSTK_ZE550ML-sal358-amtech.vn for ZE550ML / link to xFSTK_ZE551ML-sal358-amtech.vn for ZE551ML) using xFSTK Downloader (link to xFSTK Downloader 1.7.0) [B
(guides for everything in this step 1: english version - same in vietnamese with screenshots and valid links - detailed PDF for xFSTK with screenshots).[/B] => phone boots on fastboot
2. Flash a lollipop ROM (or Marshmallow raw if you find it) with Asus Flash Tool to repair fastboot info (like serial number) and access recovery if you want to install Marshmallow from a zip
In order to get a working recovery menu (because I found a zip for Marshmallow but no raw, I'll have to install a recovery),
I had to install Asus Flash Tool (link to Asus Flash Tool 1.14 - Note: archive password is www.asus-zenfone.com ),
flash a Lollipop raw (link to WW_ZE550ML_2.20.40.149.raw) on my ZenFone 2 ZE550ML using Asus Flash Tool (Model: ZE550ML - wipe data : no)
(guides for everything in this step 2: english version - same in vietnamese with screenshots and valid links)
BUT because Asus Flash Tool will wipe everything except user data and change your serial number from 0123456789ABCDEF to your legit serial number, flashing will NOT work and process will be ENDLESS because serial number has changed so phone is not found and you're not warned of that by Asus Flash Tool.
After 20 minutes of "OKAY" status displayed in green text on your phone, after 20 minutes of "a500cgfastboot.exe" running in task manager,
I think you can safely unplug USB cable, abort Asus Flash Tool by closing this software, killing "a500cgfastboot.exe",
rebooting phone (notice serial number change in fastboot info on phone's screen) and flash again with same settings but the new serial number (different of 0123456789ABCDEF).
This flash should work, after an hour or less you'll see in Asus Flash Tool that it's finished.
3. Flash Marshmallow zip with adb sideload
Finally, you'll have to shut down your phone,
boot in recovery mode (guide is here),
connect it to computer, select "apply update from adb",
install adb (link to ADB Installer 1.4.3 - Note: install it system-wide but don't install Android USB drivers) on your computer,
download zip OTA for Marshmallow (link to UL-Z008-WW-4.21.40.54-user.zip for ZE550ML / link to UL-Z00A-WW-4.21.40.61-user.zip for ZE551ML),
open a command prompt in the folder where you downloaded files (using "File > Open command prompt > Open command prompt" in the Windows Explorer's ribbon), then type :
Code:
adb devices
to verify that your phone is detected (you should see your serial number in cmd),
then type the following command to flash Marshmallow stock (zip is NOT pre-rooted if you want to root you'll have to do it after) :
ZE550ML
Code:
adb sideload UL-Z008-WW-4.21.40.54-user.zip
ZE551ML
Code:
adb sideload UL-Z00A-WW-4.21.40.61-user.zip
It may take a while decompressing then sending to phone. Then select "wipe cache partition" in your recovery menu,
wait until you see again the menu (so, wait until end of wiping cache), and select "reboot").
Now pray, and your device should magically boot the latest beautiful stock Marshmallow ROM from Asus, with all your data, exactly like before you bricked it.
It worked for me, but with the right new images it should work perfectly for you...
Enjoy this small guide, I hope you'll appreciate hard googling work
Thank you all, my problem is solved
fanfan54 said:
Solved without losing any data (except settings of some non-system apps)
Hello,
I found on ZenTalk (this thread : http://www.asus.com/zentalk/forum.php?mod=redirect&goto=findpost&ptid=78184&pid=392686) a working link to Latest Marshmallow sideload zip for ZE550ML OR ZE551ML. It was the right file, finally.
I sideloaded this file using adb and recovery mode, it worked PER-FECT-LY : my phone just rebooted without any problem, like before the problem. And with latest Marshmallow obviously : I immediately received messages, could access to my pictures, apps, with the same settings than before, in French (just one thing: settings for some non-system apps are reset)
Here is guide of everything I did to unbrick a Marshmallow ZE550ML stuck on USB logo with no bootloader :
(Note: I recommend you to charge your ZenFone for a few hours as soon as you'll get fastboot menu at step 1, so it will not shutdown... Even if it's not turning on the orange LED, it's charging )
(Note also that these are the steps I had to do in order to unbrick MY phone without losing data and installing Marshmallow. For your phone some steps might be unnecessary, if you're lucky... I know this is a very long guide but I had to do this in MY case)
1. Flash basic bootloader with xFSTK Downloader to boot fastboot
I had, first, to switch to advanced startup with support for unsigned drivers (video tutorial here),
install Asus USB drivers (link to Asus USB drivers here - note: video tutorial to install drivers from inf (repeat for every device available : ADB Interface, Bootloader Interface, etc...) )
and IntelSocUSB driver (link to IntelSocUSB driver 1.2.0 - Note: Before finishing IntelSocUSB setup it will ask you to configure a device : you'll have to connect your ZenFone 2 using an USB cable to your computer, while it's displaying USB logo, and WAIT FOR DETECTION IN Device Manager as "Moorefield device" under "Intel Soc" section),
to flash a fastboot bootloader (link to xFSTK_ZE550ML-sal358-amtech.vn for ZE550ML / link to xFSTK_ZE551ML-sal358-amtech.vn for ZE551ML) using xFSTK Downloader (link to xFSTK Downloader 1.7.0) [B
(guides for everything in this step 1: english version - same in vietnamese with screenshots and valid links - detailed PDF for xFSTK with screenshots).[/B] => phone boots on fastboot
2. Flash a lollipop ROM (or Marshmallow raw if you find it) with Asus Flash Tool to repair fastboot info (like serial number) and access recovery if you want to install Marshmallow from a zip
In order to get a working recovery menu (because I found a zip for Marshmallow but no raw, I'll have to install a recovery),
I had to install Asus Flash Tool (link to Asus Flash Tool 1.14 - Note: archive password is www.asus-zenfone.com ),
flash a Lollipop raw (link to WW_ZE550ML_2.20.40.149.raw) on my ZenFone 2 ZE550ML using Asus Flash Tool (Model: ZE550ML - wipe data : no)
(guides for everything in this step 2: english version - same in vietnamese with screenshots and valid links)
BUT because Asus Flash Tool will wipe everything except user data and change your serial number from 0123456789ABCDEF to your legit serial number, flashing will NOT work and process will be ENDLESS because serial number has changed so phone is not found and you're not warned of that by Asus Flash Tool.
After 20 minutes of "OKAY" status displayed in green text on your phone, after 20 minutes of "a500cgfastboot.exe" running in task manager,
I think you can safely unplug USB cable, abort Asus Flash Tool by closing this software, killing "a500cgfastboot.exe",
rebooting phone (notice serial number change in fastboot info on phone's screen) and flash again with same settings but the new serial number (different of 0123456789ABCDEF).
This flash should work, after an hour or less you'll see in Asus Flash Tool that it's finished.
3. Flash Marshmallow zip with adb sideload
Finally, you'll have to shut down your phone,
boot in recovery mode (guide is here),
connect it to computer, select "apply update from adb",
install adb (link to ADB Installer 1.4.3 - Note: install it system-wide but don't install Android USB drivers) on your computer,
download zip OTA for Marshmallow (link to UL-Z008-WW-4.21.40.54-user.zip for ZE550ML / link to UL-Z00A-WW-4.21.40.61-user.zip for ZE551ML),
open a command prompt in the folder where you downloaded files (using "File > Open command prompt > Open command prompt" in the Windows Explorer's ribbon), then type :
Code:
adb devices
to verify that your phone is detected (you should see your serial number in cmd),
then type the following command to flash Marshmallow stock (zip is NOT pre-rooted if you want to root you'll have to do it after) :
ZE550ML
Code:
adb sideload UL-Z008-WW-4.21.40.54-user.zip
ZE551ML
Code:
adb sideload UL-Z00A-WW-4.21.40.61-user.zip
It may take a while decompressing then sending to phone. Then select "wipe cache partition" in your recovery menu,
wait until you see again the menu (so, wait until end of wiping cache), and select "reboot").
Now pray, and your device should magically boot the latest beautiful stock Marshmallow ROM from Asus, with all your data, exactly like before you bricked it.
It worked for me, but with the right new images it should work perfectly for you...
Enjoy this small guide, I hope you'll appreciate hard googling work
Thank you all, my problem is solved
Click to expand...
Click to collapse
Man, Today you saved my life and my phone's life . I had exact same problem like yours and I have tried everything to bring my phone back to life last a few days. Today I just noticed your post and it solved my problem perfectly. Thanks man ,really appreciate it ..
muhammed cy said:
Man, Today you saved my life and my phone's life . I had exact same problem like yours and I have tried everything to bring my phone back to life last a few days. Today I just noticed your post and it solved my problem perfectly. Thanks man ,really appreciate it ..
Click to expand...
Click to collapse
Hello,
Thanks for your great feedback muhammed!
Have a nice day!
help me
fanfan54 said:
Hello,
Thanks for your great feedback muhammed!
Have a nice day!
Click to expand...
Click to collapse
please share to my email link WW_ZE550ML_2.20.40.149.raw
[email protected]
tanks before
iwakpauz said:
please share to my email link WW_ZE550ML_2.20.40.149.raw
[email protected]
tanks before
Click to expand...
Click to collapse
Hello, I already sent it to you by email. Here is the link : https://yadi.sk/d/XAUyR8eRtuKdA
Hello,
Sorry for reviving this thread, but I found myself in the same situation. I followed every step, and it works flawlessly. However, after flashing the stock Marshmallow ROM, unlocking the bootloader, flashing TWRP and reinstalling the stock ROM through there, it always bricks my phone (it's the ZE551ML, by the way), so I can't root my device at all. I wonder if anyone has any way of solving this?
I also found that, after unlocking the bootloader, the serial number appears as 0123456789ABCDEF again. I'm pretty much stuck on the stock ROM at this point, with no way of rooting it at all. I can't flash SuperSU through the stock recovery either, it gives me the "signature verification failed" error.
Thanks a lot in advance.
ayuinaba said:
Hello,
Sorry for reviving this thread, but I found myself in the same situation. I followed every step, and it works flawlessly. However, after flashing the stock Marshmallow ROM, unlocking the bootloader, flashing TWRP and reinstalling the stock ROM through there, it always bricks my phone (it's the ZE551ML, by the way), so I can't root my device at all. I wonder if anyone has any way of solving this?
I also found that, after unlocking the bootloader, the serial number appears as 0123456789ABCDEF again. I'm pretty much stuck on the stock ROM at this point, with no way of rooting it at all. I can't flash SuperSU through the stock recovery either, it gives me the "signature verification failed" error.
Thanks a lot in advance.
Click to expand...
Click to collapse
Hello , Firstly , although not clear when you say > "flashing TWRP and reinstalling the stock ROM through there"
1) You can only back up stock rom and restore from TWRP - you cannot flash stock rom from TWRP .
2) Were you bricked and used xFSTK at some point and did you correct serial before upgrading to M ?
signature failed is normal after unlocking bootloader :good:
timbernot said:
Hello , Firstly , although not clear when you say > "flashing TWRP and reinstalling the stock ROM through there"
1) You can only back up stock rom and restore from TWRP - you cannot flash stock rom from TWRP .
2) Were you bricked and used xFSTK at some point and did you correct serial before upgrading to M ?
signature failed is normal after unlocking bootloader :good:
Click to expand...
Click to collapse
Hello, and thank you for the reply!
I'm rather new to this, so I apologize for the possible incorrect terms... I'll try to describe everything as detailed as possible:
My device got bricked, and I sought a solution for it, thus arriving at this thread.
I did every step the OP described to unbrick the device, using xFSTK, *except* rebooting the device after the first flash with ASUS Flash Tool (because when I did, it'd become unresponsive, so I used the flash tool a second time without rebooting and it recovered my serial number).
Next, I went to recovery and installed the Lollipop .zip through adb sideload.
Afterwards, I installed the Marshmallow .zip through adb sideload again.
It's working great this way, but I wanted to root it, so I rebooted into bootloader, and tried to "fastboot boot twrp.img" with no success.
After reading a few more threads, I figured I had to unlock the bootloader before being able to boot into twrp, so I used the bootloader unlocker.
After unlocking it, I was unable to boot into anything but the bootloader (which I presume is normal), so I tried to boot into twrp through fastboot with no success - I had to use "fastboot flash recovery twrp.img" for it to work.
I went into recovery mode, and twrp launched. Since I presumed I had to install Marshmallow from there, due to unlocking the bootloader, I did - through "install .zip".
And after doing that and rebooting the system, it became unresponsive again, - bricked: black screen, only vibrates - thus returning to its initial state.
ayuinaba said:
Hello, and thank you for the reply!
I'm rather new to this, so I apologize for the possible incorrect terms... I'll try to describe everything as detailed as possible:
My device got bricked, and I sought a solution for it, thus arriving at this thread.
I did every step the OP described to unbrick the device, using xFSTK, *except* rebooting the device after the first flash with ASUS Flash Tool (because when I did, it'd become unresponsive, so I used the flash tool a second time without rebooting and it recovered my serial number).
Next, I went to recovery and installed the Lollipop .zip through adb sideload.
Afterwards, I installed the Marshmallow .zip through adb sideload again.
It's working great this way, but I wanted to root it, so I rebooted into bootloader, and tried to "fastboot boot twrp.img" with no success.
After reading a few more threads, I figured I had to unlock the bootloader before being able to boot into twrp, so I used the bootloader unlocker.
After unlocking it, I was unable to boot into anything but the bootloader (which I presume is normal), so I tried to boot into twrp through fastboot with no success - I had to use "fastboot flash recovery twrp.img" for it to work.
I went into recovery mode, and twrp launched. Since I presumed I had to install Marshmallow from there, due to unlocking the bootloader, I did - through "install .zip".
And after doing that and rebooting the system, it became unresponsive again, - bricked: black screen, only vibrates - thus returning to its initial state.
Click to expand...
Click to collapse
Hi again , yes you did everything right up to a point .
You will have to use xFSTK again , flash in aft after till you see ` RESULT = OK ` after a couple of minutes into flash (serial will be incorrect here) ...
Close aft - force close it - keep phone connected through-out -- do not dislodge data cable--- set everything back up in aft again -- then press vol+ once --- your serial will be corrected -- start the flash and let it finish , it will boot into the system related to the raw you flashed.
upgrade like before BUT when in M , use giovix`s Modder tool to unlock bootloader flash, twrp and root etc.
You will be fine ,just remember to back-up stock rom in TWRP first before installing custom LineageOS ,so you can use` return to stock option ` in modder tool after restoring your stock back-up -- to install future updates :good:
timbernot said:
Hi again , yes you did everything right up to a point .
You will have to use xFSTK again , flash in aft after till you see ` RESULT = OK ` after a couple of minutes into flash (serial will be incorrect here) ...
Close aft - force close it - keep phone connected through-out -- do not dislodge data cable--- set everything back up in aft again -- then press vol+ once --- your serial will be corrected -- start the flash and let it finish , it will boot into the system related to the raw you flashed.
upgrade like before BUT when in M , use giovix`s Modder tool to unlock bootloader flash, twrp and root etc.
You will be fine ,just remember to back-up stock rom in TWRP first before installing custom LineageOS ,so you can use` return to stock option ` in modder tool after restoring your stock back-up -- to install future updates :good:
Click to expand...
Click to collapse
Did everything as you told me, but now whenever I "reboot to system", it boots into recovery every time... :\
To clarify, I used the command "fastboot flash recovery twrp_z00a_v24_repack.img", and then installed the latest .zip of SuperSU in TWRP (Install -> SuperSU.zip).
EDIT: Sorry, I mistook Giovix's bootloader unlocker for their full modder tool, I'll be trying that now.
EDIT 2: You saved my butt! Thank you so much for your help, I managed to succeed in everything, finally!
ayuinaba said:
Did everything as you told me, but now whenever I "reboot to system", it boots into recovery every time... :\
To clarify, I used the command "fastboot flash recovery twrp_z00a_v24_repack.img", and then installed the latest .zip of SuperSU in TWRP (Install -> SuperSU.zip).
EDIT: Sorry, I mistook Giovix's bootloader unlocker for their full modder tool, I'll be trying that now.
EDIT 2: You saved my butt! Thank you so much for your help, I managed to succeed in everything, finally!
Click to expand...
Click to collapse
Marvelous stuff. ,its been a pleasure helping you
Happy flashing
---------- Post added at 02:47 AM ---------- Previous post was at 02:44 AM ----------
PS, should see the lengths some people go to restore serial
Why ? Lol When it
Only takes 3 mins max this way
Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/android/help/lenovo-k8-note-stuck-boot-logo-flashing-t3751324/post75974342#post75974342" and found this
The bootlogo issue.
Hey! I read your post regarding your k8 note being stuck at the bootlogo.
Consider that you can still use TWRP, boot into it.
Then go ahead and download the SuperSU zip on your PC/laptop and connect your phone with a USB. You might be able to see the SD card folders on your PC, then you can just copy and paste it to the internal sd and flash it. You'll be good to go. If that doesn't work, in the TWRP Mode, go to advanced and select ADB sideload. You can now flash using ADB sideload.
Search for tutorials on ADB sideload. It's easy and that should work.
Click to expand...
Click to collapse
solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks
beingfhd said:
Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/an...-flashing-t3751324/post75974342#post75974342" and found this solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks
Click to expand...
Click to collapse
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Thanks
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?
beingfhd said:
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?
Click to expand...
Click to collapse
No you can't
k8 note stuck on bootloop...??
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....
DeepRBasak said:
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....
Click to expand...
Click to collapse
This might be helpful https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
thank u somuch am also mobile sevice man it help full for me
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse
I have the same problem. please help us!
HARDROCK2614 said:
I have the same problem. please help us!
Click to expand...
Click to collapse
What problem do you have, please describe
I have lost all my mind and need serious help.
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.
custom619 said:
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.
Click to expand...
Click to collapse
I couldn't find more about the problem online, can you please upload a screenshot of the error. Try using the latest version of SP Flash Tool and see if the problem persists
I have lost all my mind and need serious help.
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd
custom619 said:
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd
Click to expand...
Click to collapse
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Anas Rahman said:
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Click to expand...
Click to collapse
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.
I have lost all my mind and need serious help.
custom619 said:
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.
Click to expand...
Click to collapse
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.
custom619 said:
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.
Click to expand...
Click to collapse
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds
Anas Rahman said:
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds
Click to expand...
Click to collapse
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:
custom619 said:
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:
Click to expand...
Click to collapse
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
I Already tried this thread you suggested. No outcome.
Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
This group is possibly dead. No one has responded till today...