Related
Hello dear members, I bricked my Samsung M820 Prevail, it now in bootloop, just show SAMSUNG at start up then reboots, the brick occurs when I modified NV items, well the facts are:
I can put it in download mode then use Samsung Odin to flash all (Boot, PDA, Phone) without problems but again after reboot enters in bootloop
The recovery mode (volume up + power) don't work.
I'm sure that can revert brick if know how to communicate with the phone in download mode to access NV items (EFS partition), but unfortunately CDMA Workshop or QPST can't communicate with the phone in download mode...
Exist a program that can communicate with the phone using Odin protocol to access partitions (EFS) ? maybe a way to backup EFS with odin then modify it and flash it back to the phone?
I know exactly what NV item caused the problem (NV item 1878), I only need to change it, but my phone stuck in download mode... any ideas greatly appreciated !
Thank you.
Maybe I can flash with odin a modified bootloader that can skip NV items, then phone boot to OS then I can enable DM ? or maybe a bootloader that redirect the boot to the SD card to enable DM ? ... ok, ok, it's difficult, but who knows...
Can someone share a prevail backup of EFS (efs.rfs or CDMA.rfs) then I will modify it with my own parameters than flash it to the phone with odin...
I don't know what to do ! the easy way is get another phone but I prefer the challenge... let me know. Thanks.
WARNING: I WILL NOT BE RESPONSIBLE OF ANY FAULT THAT MAY OCCUR TO YOUR DEVICE. YOU`RE DOING THIS AT YOUR OWN RISK.
Okay so after you`ve accepted taking the risk, let`s start...
So,i was spending alot of time trying to make The "OEMINFO-Hack-Tool-v1" to work, I discovered a Simple And way safer procedure...
MAKE SURE YOUR DEVICE IS ROOTED!( Or it won`t work )
1. Download The App ( 5iromtoolbox ) in the attachment & install it in your rooted device...
NOTE: I recommend The "Kingo App" for rooting, its way quick and simple...
2. Click on IMEI backup...
3. After Its completion, connect your phone in MTP ( Media Transfer ) mode, browse to SDCARD
4. Copy the whole folder somewhere in your PC ( Backups are Always Important )...
5. Now, browse to SDCARD/5irom/imeibackup/ and click copy on the file "5.img"
6. Back to SDCARD ( root ), Create a folder named "OEMINFO-BACKUP" & paste "5.img" file in there...
7. Open Up "OEMINFO-Hack-Tool" folder & run "2-oeminfo-hack-windows"...( This time it should Be successful, if u had troubles...)
NOTE: If it says "ADB/Shell denied superuser access", Change your superuser App to SuperSU...
8. After completion, Copy the "Dload" folder of your firmware to the SDCARD & and Turn off your device...
9. Hold "Volume up + Volume Down", then hold the power button ( The Firmware Update process Will start )...
10. After Completion the device will Boot up, But!, Unrooted... ( If your dial *#06# you`ll notice a Blank IMEI )
11. To fix that, Root the Device ( Kingo App recommended) & install the "5iromtoolbox" app again...
12. Go to your "file manager" app and Copy the "5irom" folder to the "internal storage"...
13. Launch "5iromtoolbox" and restore your IMEI...
14. After Completion, RESTART! the device, ( It will do a Hard Reset )
15. After Reboot, Dial *#06#, this time the IMEI would be back to Original....
AND THATS ALMOST IT!
HIT THANKS IF THIS HELPED YOU.
hello
after using your method i get stuck on blue screen and the phone wont boot into recovery or fastboot, so i tried flashing the original rom trough download mode but it gets stuck on around 50%, any ideas on how to fix it? i could really use some help here, my phones like this for about a month and i googled everything, nothing seems to work so far
androidnoob2212 said:
after using your method i get stuck on blue screen and the phone wont boot into recovery or fastboot, so i tried flashing the original rom trough download mode but it gets stuck on around 50%, any ideas on how to fix it? i could really use some help here, my phones like this for about a month and i googled everything, nothing seems to work so far
Click to expand...
Click to collapse
did you follow the procedures well?
was your phone rooted?
is it a Y300?
where were you in the steps until the error occured?
try to find ways to unbrick your device, because thats seems to be whats going on...
ps: I don`t really use the device no more, so it be pretty hard to help you with that.
ill probably send it to service but thanks
fastboot doesnt work, twrp is gone, only accesible mode is download mode
my phone is a rooted huawei y300(EU) with twrp recovery and a oficial rom, it failed after the step where i have to reboot, i can read the imei using dc unlock and its not 0 or my original imei, and i think that might be the issue, idk where i messed up, tried using dsf cdma tool but dont really know how to use it and the tutorials out there on the web dont work for me, anyways thanks for the reply
ps. i got a new one to but its a waste to just let it collect dust
I have an old Z00A that has hardware problems (constant screen flickering, battery stuck at 50%) so I backed up every partition with TWRP including system, boot , data etc and purchased a new Z00A.
I used the new Z00A for a few days to ensure that there was no hardware problems and then proceeded to unlock the boot loader and flash TWRP recovery. At this point both sims were working.
I then restored the backup of the old Z00A with TWRP on the new Z00A (Had to change folder name so TWRP recognizes the backup from the old Z00A). After the restore was complete and the phone booted, sim1 stopped working.
After searching through the forums and Google I found some solutions to it but none of them seem to work
Solutions that I have tried
1. Factory reset the phone through TWRP
2. Wiped every partition through( exclude SD Card) TWRP, flashed stock recovery and installed the official firmware.zip file through stock recovery
3. Did a factory reset with the stock recovery flashed (skimmed through the setup)
4. I downloaded the latest RAW file firmware and installed it through ASUS Flash Tool (Had some issues at first but eventually it went through but sim1 doesn't work)
5. I installed the official Lollipop rom through fastboot and flashed a custom Lollipop rom
6. Flashed stock based MM rom (CleanStock), custom MM and N roms (CM, Lineage, RR) through TWRP and do factory resets
7. I have tried using the adb shell and root commands to set the IMEI but they still return to 004999--------
8. Placed the sims in the old Z00A and they still work
9. Swapped the sim trays of both phones (sim1 and sim2 works on old Z00A but sim1 still doesn't work on new Z00A)
10. Used phonetools to set IMEI but they still return to 004999--------
From flashing the custom roms and swapping the sim trays I can conclude that this is not a hardware problem. On most custom roms it recognizes that there is a sim inserted in sim1 (A pop up comes up about sim has changed etc...) but there is no signal and the phone says emergency calls only or no service. I believe that the baseband or modem file are somehow corrupted due to the TWRP restore from the old Z00A and need to be reflashed but this only seems possible on the Snapdragon variant.
All help is appreciated on this matter :fingers-crossed:
Captain Krunch said:
I have an old Z00A that has hardware problems (constant screen flickering, battery stuck at 50%) so I backed up every partition with TWRP including system, boot , data etc and purchased a new Z00A.
I used the new Z00A for a few days to ensure that there was no hardware problems and then proceeded to unlock the boot loader and flash TWRP recovery. At this point both sims were working.
I then restored the backup of the old Z00A with TWRP on the new Z00A (Had to change folder name so TWRP recognizes the backup from the old Z00A). After the restore was complete and the booted, sim1 stopped working.
After searching through the forums and Google I found some solutions to it but none of them seem to work
Solutions that I have tried
1. Factory reset the phone through TWRP
2. Wiped every partition through( exclude SD Card) TWRP, flashed stock recovery and installed the official firmware.zip file through stock recovery
3. Did a factory reset with the stock recovery flashed (skimmed through the setup)
4. I downloaded the latest RAW file firmware and installed it through ASUS Flash Tool (Had some issues at first but eventually it went through but sim1 doesn't work)
5. I installed the official Lollipop rom through fastboot and flashed a custom Lollipop rom
6. Flashed stock based MM rom (CleanStock), custom MM and N roms (CM, Lineage, RR) through TWRP and do factory resets
7. I have tried using the adb shell and root commands to set the IMEI but they still return to 004999--------
8. Placed the sims in the old Z00A and they still work
9. Swapped the sim trays of both phones (sim1 and sim2 works on old Z00A but sim1 still doesn't work on new Z00A)
10. Used phonetools to set IMEI but they still return to 004999--------
From flashing the custom roms and swapping the sim trays I can conclude that this is not a hardware problem. On most custom roms it recognizes that there is a sim inserted in sim1 (A pop up comes up about sim has changed etc...) but there is no signal and the phone says emergency calls only or no service. I believe that the baseband or modem file are somehow corrupted due to the TWRP restore from the old Z00A and need to be reflashed but this only seems possible on the Snapdragon variant.
All help is appreciated on this matter :fingers-crossed:
Click to expand...
Click to collapse
very first of all root your device. install any root explorer like es file explorer. enable root explorer and hidden files in options of file explorer.
now go to root storage of device meas (/)
find factory folder in factory go to telephony folder and take screenshot
find config folder and then go to telephony folder and take screenshot
post screenshots here then we will look further
sukhwant717 said:
very first of all root your device. install any root explorer like es file explorer. enable root explorer and hidden files in options of file explorer.
now go to root storage of device meas (/)
find factory folder in factory go to telephony folder and take screenshot
find config folder and then go to telephony folder and take screenshot
post screenshots here then we will look further
Click to expand...
Click to collapse
Screenshots posted
Captain Krunch said:
Screenshots posted
Click to expand...
Click to collapse
flash debug firmware and use intel phone tool
sukhwant717 said:
flash debug firmware and use intel phone tool
Click to expand...
Click to collapse
Can you link me to this debug firmware please?, I have already found the Intel phone flash tool
Captain Krunch said:
Can you link me to this debug firmware please?, I have already found the Intel phone flash tool
Click to expand...
Click to collapse
https://drive.google.com/open?id=0B72QQTXqZSRwTmZoQXZxZ0tvTmc
sukhwant717 said:
https://drive.google.com/open?id=0B72QQTXqZSRwTmZoQXZxZ0tvTmc
Click to expand...
Click to collapse
Thank you very much, after flashing this firmware how do I proceed?, I am currently downloading it and hopefully it flashes successfully
Mods can close this thread as he helped me resolve the issue through PMs
Same issue what to do?
Sent from my AO5510 using XDA-Developers Legacy app
My problem was because of a wrong IMEI, I had to flash the debug firmware he linked above and use phone tools 191 to change the IMEI then sim1 began working.
Send me that tool
mkaraniya said:
Send me that tool
Click to expand...
Click to collapse
Tools: https://yadi.sk/d/30q9w4KJjvgHd
You can also watch this video to help you use the tools: https://youtu.be/5oxug7ThayM
Hi everybody,
I also have a problem with sim card , but it is a little bit different then these that have been described above. First of all my sim is working but not all of the time. I do calls and also I receive a lot of calls. But from time to time sim card just restarts and wants again pin code to unlock ( the phone doesn't restart). A lot of people told me that when they are trying to connect me, their phones are ringing twice and after that they heard busy signal as the call was rejected or the line is busy. In the same time my phone doesn't show any incoming call. Also it is interesting that some people told me that they can't connect me for the hole day and in the same time there is no problem with receiving other calls. From time to time I also can't dial a number. The screen stacks on dialing screen for app. 30 seconds and after that just switch to contacts list.
So what I tried till now:
1. I did a clean install of OTA WW_4.21.40.327
2. Tried to use Sim2 slot, the problems didn't disappear
3. I changed my sim card with new one with no result
4. Tried the sim card with other phone, everything works fine
May be it's time to buy a new phone, but before that I want to be sure that the problems are not caused by software bug.
Any advices and help will be appreciated.
P.S.
The phone is rooted, Magisk 13.3 is installed. The phone is ZE551ML, Z00AD
Captain Krunch said:
Tools: https://yadi.sk/d/30q9w4KJjvgHd
You can also watch this video to help you use the tools: https://youtu.be/5oxug7ThayM
Click to expand...
Click to collapse
is your phone fixed now?
i have the same problem with my lenovo p90 (missing imei). but i cant enabled its com port (no way to fix it with intel phone tool without com port existed). no reference to enable it (the com port) nor imei repair on lenovo p90.
i need you to enter your phone with adb shell as root, and create image of /dev/block/mmcblk0p3 and /dev/block/mmcblk0p5. or just copy config and factory folder, then zipped them, then shared here. i need them, to restore what I accidently erased (config and factory partition).
trust me, i won't do any harm to your specific data.
you're my last hope. i hope you'll understand.
dejoebad said:
is your phone fixed now?
i have the same problem with my lenovo p90 (missing imei). but i cant enabled its com port (no way to fix it with intel phone tool without com port existed). no reference to enable it (the com port) nor imei repair on lenovo p90.
i need you to enter your phone with adb shell as root, and create image of /dev/block/mmcblk0p3 and /dev/block/mmcblk0p5. or just copy config and factory folder, then zipped them, then shared here. i need them, to restore what I accidently erased (config and factory partition).
trust me, i won't do any harm to your specific data.
you're my last hope. i hope you'll understand.
Click to expand...
Click to collapse
Am sorry but I recently sold my ZF2 and currently awaiting a new phone. Am sure someone else on the P90 forums can help you get the files you are looking for
Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/android/help/lenovo-k8-note-stuck-boot-logo-flashing-t3751324/post75974342#post75974342" and found this
The bootlogo issue.
Hey! I read your post regarding your k8 note being stuck at the bootlogo.
Consider that you can still use TWRP, boot into it.
Then go ahead and download the SuperSU zip on your PC/laptop and connect your phone with a USB. You might be able to see the SD card folders on your PC, then you can just copy and paste it to the internal sd and flash it. You'll be good to go. If that doesn't work, in the TWRP Mode, go to advanced and select ADB sideload. You can now flash using ADB sideload.
Search for tutorials on ADB sideload. It's easy and that should work.
Click to expand...
Click to collapse
solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks
beingfhd said:
Hello Guys,
The issue is that i wanted to root my lenovo k8 note so follow this link "https://forum.xda-developers.com/android/development/tutorials-how-to-root-lenovo-k8-note-t3685502", Everything works file but in last rooting step no. 9
9. If you see internal storage 0mb Then GoTo Wipe and FORMAT DATA once & reboot to recovery
but in my device there has memory 59999mb so i ignored and reboot using twrp but it says no OS installed
and shows orange state, then i format phone using twrp but nothing happens again orange state and no os installed.
then i found another article with same issue "https://forum.xda-developers.com/an...-flashing-t3751324/post75974342#post75974342" and found this solution over there and flash supersu but nothing happens.
After so many try i locked oem bootloader in fastboot using command "fastboot oem lock", after this my lenovo k8 note show Red State.
Now i am not able to do anythig please help me out.
Basically my device is stuck at the bootloop with the
Red State
=> "Your Device has fail to pass verification and may not work properly
your device will boot in 10 sec trusted
Your device will boot in 5 seconds"
definitely I must have screwed up something.
Please help me to boot my Lenovo K8 note in normal mode.
Thanks
Click to expand...
Click to collapse
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Thanks
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?
beingfhd said:
Thanks for the reply but i recovered it using flash stock rom.
But i have another ques that can i flash twrp without oem unlock?
Click to expand...
Click to collapse
No you can't
k8 note stuck on bootloop...??
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....
DeepRBasak said:
need help.....my k8 note was running oreo....thn i downgraded to nougat...duo to bugs on oreo... thn i was facing more problems... so i decided to flash oreo again. ... i was trying to flash...but i was getting some brom error...so i thought it might be due to unlocked bootloader... so i tried to lock it.. and then try... and the system got deleted.... i cant even access fastboot... but device is detecting on sp flash tool... but getting the same error... help buddy... its urgent.. my device is not turning on... but the led is working....
Click to expand...
Click to collapse
This might be helpful https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
thank u somuch am also mobile sevice man it help full for me
Anas Rahman said:
Are you okay with losing your data on your phone? If yes then go ahead and flash stock ROM with sp flash tool. And about your problem, I guess you wiped the /system partition as well that's why it was showing no os installed.
Another thing is that if you install twrp Do not boot up your phone, boot up into twrp by pressing volume up and power button at the same time you'll need to flash magisk or supersu so that twrp can modify partition correctly.
Click to expand...
Click to collapse
I have the same problem. please help us!
HARDROCK2614 said:
I have the same problem. please help us!
Click to expand...
Click to collapse
What problem do you have, please describe
I have lost all my mind and need serious help.
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.
custom619 said:
Recently, the march update came. i forgot that rooted phone should not be updated by the OTA update. And i did. As a result i got stuck in a bootloop. Then I had to use the oreo ROM from this forum and flashed it using SP Flash tool. It was a successfull flash. Then I used Maui META to write the IMEI for both sim. That was successfull too(Wifi and bluetooth addresses were working by themselves and i didnt write the serial number of the phone).
After working nicely for three days, i was using Whatsapp and a friend of mine sent me a .pptx file (powerpoint presentation). I opened it using WPS office app. I opened it multiple times in morning with no problems. But in the afternoon at about 2.53 PM while i was in my car, i was unable to open the file. The phone hanged. It heated up. To get out of the hang, i restarted the phone using the power button. IT DID NOT START. All it showed was the lenovo logo screen. And after doing more restarts, the phone went completely blank.
Now i cannot start it, or charge it. So i thought of flashing it again. But when i connect it to my PC, it keeps CONNECTING and DISCONNECTING. what i saw in the device manager was that the driver keeps changing very fast betwee MTK USB PORT and PRELOADER.
I found the solution to be updating the drivers manually. I did. Now the driver shows only DA USB VCOM and when it changes, it goes invisible in the PC and then appears back. Now when i start flashing, the first red progress bar appears as: Download DA 100%. and the flash hangs. After some time, this error will popup: ERROR: STATUS_UNKNOWN_STORAGE_TYPE (0xC0040009)
Please someone help me.
Click to expand...
Click to collapse
I couldn't find more about the problem online, can you please upload a screenshot of the error. Try using the latest version of SP Flash Tool and see if the problem persists
I have lost all my mind and need serious help.
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd
custom619 said:
here are the screenshots. Note that the battery is in the phone always because i am unable to open the back cover. During the flashing process, i did not press the vol - button.
https://ibb.co/sq8knnj
https://ibb.co/VjqKQm3
https://ibb.co/4VkVPjs
https://ibb.co/cw2BzLC
https://ibb.co/kcjjJ74
Now in the following screenshots, i kept the vol - button pressed down. Note that the driver is stuck at preloader and not DA. Also the first bar is yellow color in both these cases. However, in the above situation, multiple files were flashed. But in this below situation, only this so called "flash" was done; that too unsucessful in the end.
https://ibb.co/1QKtsCb
https://ibb.co/Ssj58Zd
Click to expand...
Click to collapse
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Anas Rahman said:
The problem may be with your drivers, i see you have Preloader drivers only.
Follow this guide for installing drivers - https://forum.xda-developers.com/elephone-m2/help/windows-10-mtk-vcom-usb-drivers-32-64-t3267033
Click to expand...
Click to collapse
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.
I have lost all my mind and need serious help.
custom619 said:
So i did as you said brother. I don' t know how but something happened. The phone, after a long time actually displayed up. It showed the LENOVO logo and down in the corner two things came in written :
>device unlocked
>Tool DL image Fail
I googled it up and found that it requires to flash the phone with the DA DL option ticked. I did that but it does not flash. The error is same as follows:
https://ibb.co/Ssj58Zd
Can you please guide me in the flashing process? I think the mistake is very small but i don't know where i am missing.
Click to expand...
Click to collapse
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.
custom619 said:
Okay so what i figured out is that in this state: (battery plugged in, no notification LED response, no response on power or volume buttons) the driver you require is MTK USB PORT.
I updated to this driver manually, and guess what? the phone actually flashed. But three files remained and the process hanged. (system, cache and userdata)
Now i get the errors:
>device unlocked
>Tool DL image Fail
and sometimes: >device otp failed
I am trying to flash the rest three files individually. Lets see what happens.
Click to expand...
Click to collapse
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds
Anas Rahman said:
Try flashing wihtout these three files, then boot to fastboot mode by pressing POWER+VOL UP and choose fastboot mode then flash these three files with fastboot commamds
Click to expand...
Click to collapse
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:
custom619 said:
I.AM.DUMBFOUNDED.
During flashing this error occurred:
(yellow bar in SPFlash tool)
[recovery] Download Flash 100%
ERROR: STATUS_MMC_ERR (0xC0040030)
[HINT]:
Click to expand...
Click to collapse
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
I Already tried this thread you suggested. No outcome.
Anas Rahman said:
Couldn't find much about the error, give this a try
https://forum.xda-developers.com/k8-note/how-to/lenovo-k8-note-xt1902-3-fix-dead-hard-t3791839
ALSO, in the last few screenshots you're using firmware upgrade option please choose downlaod only.
Join the Telegram group more people can help there - -
Join «Lenovo XT1902-1/2/3 (K8 Series) Official Chat Group» on Telegram: https://t.me/K8Official
Click to expand...
Click to collapse
This group is possibly dead. No one has responded till today...
If you accidentally formatted your device , then how to restore imei
How to deal with: Download not complete error
Sn writer
Elaborate more with Download part
Download Not Complete: something blah blah blah after 10s, 0*92655 something something...
Sn writer / Maui Meta doesn't work for null imei for realme3.
Thanx
The device on which I am flashing the firmware is REALME 3, I used SP Flash tool for flashing, while flashing with SP Flash flash tool, the tool show EMMC unknown,but the flashing completes successfully,
then after pressing power ON, this message appears at the bottom ,
Download Not Complete! Please press Volume+ and power key for 10s to power off. Then download again. Otherwise will block here 60s until shutdown automatically. error code : 0*9925669( I can't see the last digit bcoz of the glass cover).
PLS GUIDE.THNX
Give possible solution for imei
@yas8say , has provided possible solution, I will try that next time I'll get this error. In thread brick repair by @ATDteam .
If you can use SP flash tools, SN writer DOES work on your fone, but it's figuring out a certain timing and sequence of events. that prove my point. Your at the point you need to be, it's waiting on you doing what I'm trying to say... your too demanding wanting the quick fix...
Everytime you post pauses me in case I need to change what I write to you, so slow down, your distracting me lol
Sn Writer is actually a pain to use, and there are many versions. But I learnt a sneaky fast path with it's appearing to not work. It does work, but kind of in reverse of what you think it does.
Sn Writer, strange but true, calls 'serial' as in serial number, 'barcode' in some versions, so some think because they cant see 'serial' that it wont work. I know because at first, I did. Took me a while to learn this.
Load up Sn Writer, it'll ask to load a file, the window that opens should be where you see MTK DA ALL IN bin, select it. Then choose scatterfile from stock firmware.
Now set correct attestation keys found in stock rom, your aftersales stock, with your attestation keys /google keys blah blah...
You then have to choose what you want to flash. If you see serial, that is NOT what you want to flash, you have to flash BARCODE! (your fones serial number) I know you said IMEI, but in order, SN writer flashes BARCODE before IMEI 1, so you MUST flash serial and mac PACKAGE given in stock rom?
So what I do is open the window to type in BARCODE box, my serial number.
Imei 1 is obvious, but you MUST do imei 2 as well, or it will add a few digits to imei 1's mac, put it in imei 2 that may not corespond to your attestation key.
Over to fone.
I turn my fone OFF, hit start in SNWriter, and plug phone into pc, and wait. You can tie your hands to your chair for a min, because if you interupt this TIMING...
Just when you think it wont work, folks give up. Wait that wee bit longer... it will show pass or fail. If its all genuine stock, it cant fail, only impatience caused by not knowing this sequence, and SN's bug-inesss
I'm too tired right now, and I see you posting again lol, my eyes are dry and its sleep time, and since you think it wont work, I'll catch up later today on this post, beacuse I'm gettin ratty with myself lol
Patience.. I'll be back...
Ank Sak said:
@yas8say , has provided possible solution, I will try that next time I'll get this error. In thread brick repair by @ATDteam[/USE
[/QUOTE]
Click to expand...
Click to collapse
HI
If you have successful in booting up your device try rooting it with magisk and find the .bin file in /data/nvram and edit it !
yas8say said:
HI
If you have successful in booting up your device try rooting it with magisk and find the .bin file in /data/nvram and edit it !
Click to expand...
Click to collapse
Ank Sak said:
Give possible solution for imei
Click to expand...
Click to collapse
I have faced this too, but luckily i had already taken a backup from recovery of nvram ,nvcfg, nvdata partitions .After flashing the recovery i just restored the partitions.
SO, GUYS IF YOU CAN BOOT INTO RECOVERY FIRST THING YOU HAVE TO DO BEFORE FLASHING ANY PARTITION IS TO MAKE A BACKUP OF THEM
yas8say said:
HI
If you have successful in booting up your device try rooting it with magisk and find the .bin file in /data/nvram and edit it !
Click to expand...
Click to collapse
The unique problem I am facing is that I was able to flash the firmware, but I couldn't do anything after that because I did format which resulted in """ null imei """ without it the in-depth test app doesn't work, so the after process of bootloader unlocking and then rooting is unachievable, I can't downgrade with official ozip file given in realme website, I did that and it resulted in hard brick( basically without unlocking bootloader I can't do sh*t) , my device is up & running but without imei the further processes are stalled, I will try the method of using sn writer mentioned here..the repair guy even mentioned something about bin fine not found so he couldn't write imei, I have successfully used Maui Meta & SN Writer to write imei of my other mediatek chip containing device , but it didn't worked on realme3, yes you may have solved my problem of "" Download not Complete"" I have posted two pictures in the brick repair thread by @ATDteam . Thanx.
I will try to repair imei and post the outcome here.
2 years ago I formatted by other mediatek chip device lenevo and it did show NVRam error in wifi, after repairing imei it didn't show , & now this mediatek chip device realme does show NVRam error in wifi :: -- NVRAM WARNING: Err =0*10
Ank Sak said:
The unique problem I am facing is that I was able to flash the firmware, but I couldn't do anything after that because I did format which resulted in """ null imei """ without it the in-depth test app doesn't work, so the after process of bootloader unlocking and then rooting is unachievable, I can't downgrade with official ozip file given in realme website, I did that and it resulted in hard brick( basically without unlocking bootloader I can't do sh*t) , my device is up & running but without imei the further processes are stalled, I will try the method of using sn writer mentioned here..the repair guy even mentioned something about bin fine not found so he couldn't write imei, I have successfully used Maui Meta & SN Writer to write imei of my other mediatek chip containing device , but it didn't worked on realme3, yes you may have solved my problem of "" Download not Complete"" I have posted two pictures in the brick repair thread by @ATDteam . Thanx.
I will try to repair imei and post the outcome here.
Click to expand...
Click to collapse
If you want to unlock bootloader just use mtkclient ,its very simple.
And if you want my imei files i can provide you but you got to have twrp installed.BTW where are you from?
Tried mtkclient & mtksu app , didn't work, first I will write imei, then use in-depth test, then unlock bootloader, then downgrade, then root using mtksu.. fingers crossed
Ank Sak said:
Tried mtkclient & mtksu app , didn't work, first I will write imei, then use in-depth test, then unlock bootloader, then downgrade, then root using mtksu.. fingers crossed
Click to expand...
Click to collapse
What error did you faced when using mtkclient?
yas8say said:
What error did you faced when using mtkclient?
Click to expand...
Click to collapse
I cannot boot in fastboot mode ( I forgot to tell , in realme )
Mtk client:: shows this...
Daxflash - uploading stage 1 from mtkallinone_ da_5.2136.bin
Preloader
Preloader- [lib] : ?[ 31mError on DA_send cmd?[0m
Daxflash
Daxflash- [lib] : ?[31mError on sending DA.?[0m
Main
Main - [lib] : ?[31mError uploading da?[0m
Device formats,
First time some error
Now I ran second time python mtk xflash seccfg unlock
And now bootloader is unlocked !!! Cheers
I don't want to brick and I want to root , what must I do , pls give in steps.. Thnx
Should I directly install twrp img then magisk zip??
Orange state
Device is unlocked blah blah blah( same as lenevo)
But no fastboot mode
When use adb reboot bootloader
This comes up
The serial is not match
Fastboot_unlock_verify fail
Should I try using in-depth test app??
Ank Sak said:
Should I directly install twrp img then magisk zip??
Orange state
Device is unlocked blah blah blah( same as lenevo)
But no fastboot mode
When use adb reboot bootloader
This comes up
The serial is not match
Fastboot_unlock_verify fail
Should I try using in-depth test app??
Click to expand...
Click to collapse
TRY this:
python mtk w recovery recovery_name.img
then boot into recovery.
yas8say said:
TRY this:
python mtk w recovery recovery_name.img
then boot into recovery.
Click to expand...
Click to collapse
My device is realme3, it's on Android10 c.17, will I will be able to root with magisk ? Ok I will try.
No straight business,
Ok i tried, gave same error preloader dax main. .., so I switched off , as soon as the device turns off n pressed all three buttons to go into brom mode, the other cmd with python command ran and wrote twrp Spartan recovery,, then switched on, key combo didn't work, bcoz it was showing ' the serial is not match......' so I typed adb reboot recovery, it booted to realme UI recovery.
Surely have to downgrade to Android 9 to root & install recovery