AnyBody Plz upload original Working Phone NVRAM File For Same Baseband here.
When i flash my phone using sp tool then every time my phone invalid IMEI no and wifi Nvram error issue.
To write IMEI i use SN write tool. whenever flashing my phone I again and agian use sn write tool for write IMEI and wifi nvram.
Bro how to reflash original NVRAM file.
No one OK
Try using Maui Meta...
make sure u install the mobistel driver from here
Download the tool from here
see the process from below link
https://www.youtube.com/watch?v=-CokpIVGPBw
ajaypotty said:
Try using Maui Meta...
make sure u install the mobistel driver from here
Download the tool from here
see the process from below link
https://www.youtube.com/watch?v=-CokpIVGPBw
Click to expand...
Click to collapse
I try whole process like that sn tool station Maui Meta 3G and Sn writer tool. When formatted or flash other custom rom IMEI and NVRAM issue again and again
Sujalraj said:
I try whole process like that sn tool station Maui Meta 3G and Sn writer tool. When formatted or flash other custom rom IMEI and NVRAM issue again and again
Click to expand...
Click to collapse
r u formating using SP flash tool?
if yes... why you are formatting to install custom rom
Hi, my oneplus 5t suddenly lost the baseband information and imei, results show null baseband and unknown imei. I don't have twrp backup so is there any solution of this problem? Thanknyoubin advance
Try to flash modem "fastboot flash modem NON-HLOS.bin" (Non-hlos.bin you can get in the FullRom zip, path: Rom.zip/firmware update) or flash full firmware from here https://forum.xda-developers.com/showthread.php?t=3728665, finaly you can use unbrick tool. If this can not solve your problem, you will need to wtite your IMEI and MEID manualy (find instructions by google).
Just wanted to add my 2c to this:
Had the same problem (no mobile data, nor Wifi, no IMEI). Was able to locate an old TWRP backup and copy that to my phone via TWRP and restore JUST the EFS partition. After that, everything worked
If you accidentally formatted your device , then how to restore imei
How to deal with: Download not complete error
Sn writer
Elaborate more with Download part
Download Not Complete: something blah blah blah after 10s, 0*92655 something something...
Sn writer / Maui Meta doesn't work for null imei for realme3.
Thanx
The device on which I am flashing the firmware is REALME 3, I used SP Flash tool for flashing, while flashing with SP Flash flash tool, the tool show EMMC unknown,but the flashing completes successfully,
then after pressing power ON, this message appears at the bottom ,
Download Not Complete! Please press Volume+ and power key for 10s to power off. Then download again. Otherwise will block here 60s until shutdown automatically. error code : 0*9925669( I can't see the last digit bcoz of the glass cover).
PLS GUIDE.THNX
Give possible solution for imei
@yas8say , has provided possible solution, I will try that next time I'll get this error. In thread brick repair by @ATDteam .
If you can use SP flash tools, SN writer DOES work on your fone, but it's figuring out a certain timing and sequence of events. that prove my point. Your at the point you need to be, it's waiting on you doing what I'm trying to say... your too demanding wanting the quick fix...
Everytime you post pauses me in case I need to change what I write to you, so slow down, your distracting me lol
Sn Writer is actually a pain to use, and there are many versions. But I learnt a sneaky fast path with it's appearing to not work. It does work, but kind of in reverse of what you think it does.
Sn Writer, strange but true, calls 'serial' as in serial number, 'barcode' in some versions, so some think because they cant see 'serial' that it wont work. I know because at first, I did. Took me a while to learn this.
Load up Sn Writer, it'll ask to load a file, the window that opens should be where you see MTK DA ALL IN bin, select it. Then choose scatterfile from stock firmware.
Now set correct attestation keys found in stock rom, your aftersales stock, with your attestation keys /google keys blah blah...
You then have to choose what you want to flash. If you see serial, that is NOT what you want to flash, you have to flash BARCODE! (your fones serial number) I know you said IMEI, but in order, SN writer flashes BARCODE before IMEI 1, so you MUST flash serial and mac PACKAGE given in stock rom?
So what I do is open the window to type in BARCODE box, my serial number.
Imei 1 is obvious, but you MUST do imei 2 as well, or it will add a few digits to imei 1's mac, put it in imei 2 that may not corespond to your attestation key.
Over to fone.
I turn my fone OFF, hit start in SNWriter, and plug phone into pc, and wait. You can tie your hands to your chair for a min, because if you interupt this TIMING...
Just when you think it wont work, folks give up. Wait that wee bit longer... it will show pass or fail. If its all genuine stock, it cant fail, only impatience caused by not knowing this sequence, and SN's bug-inesss
I'm too tired right now, and I see you posting again lol, my eyes are dry and its sleep time, and since you think it wont work, I'll catch up later today on this post, beacuse I'm gettin ratty with myself lol
Patience.. I'll be back...
Ank Sak said:
@yas8say , has provided possible solution, I will try that next time I'll get this error. In thread brick repair by @ATDteam[/USE
[/QUOTE]
Click to expand...
Click to collapse
HI
If you have successful in booting up your device try rooting it with magisk and find the .bin file in /data/nvram and edit it !
yas8say said:
HI
If you have successful in booting up your device try rooting it with magisk and find the .bin file in /data/nvram and edit it !
Click to expand...
Click to collapse
Ank Sak said:
Give possible solution for imei
Click to expand...
Click to collapse
I have faced this too, but luckily i had already taken a backup from recovery of nvram ,nvcfg, nvdata partitions .After flashing the recovery i just restored the partitions.
SO, GUYS IF YOU CAN BOOT INTO RECOVERY FIRST THING YOU HAVE TO DO BEFORE FLASHING ANY PARTITION IS TO MAKE A BACKUP OF THEM
yas8say said:
HI
If you have successful in booting up your device try rooting it with magisk and find the .bin file in /data/nvram and edit it !
Click to expand...
Click to collapse
The unique problem I am facing is that I was able to flash the firmware, but I couldn't do anything after that because I did format which resulted in """ null imei """ without it the in-depth test app doesn't work, so the after process of bootloader unlocking and then rooting is unachievable, I can't downgrade with official ozip file given in realme website, I did that and it resulted in hard brick( basically without unlocking bootloader I can't do sh*t) , my device is up & running but without imei the further processes are stalled, I will try the method of using sn writer mentioned here..the repair guy even mentioned something about bin fine not found so he couldn't write imei, I have successfully used Maui Meta & SN Writer to write imei of my other mediatek chip containing device , but it didn't worked on realme3, yes you may have solved my problem of "" Download not Complete"" I have posted two pictures in the brick repair thread by @ATDteam . Thanx.
I will try to repair imei and post the outcome here.
2 years ago I formatted by other mediatek chip device lenevo and it did show NVRam error in wifi, after repairing imei it didn't show , & now this mediatek chip device realme does show NVRam error in wifi :: -- NVRAM WARNING: Err =0*10
Ank Sak said:
The unique problem I am facing is that I was able to flash the firmware, but I couldn't do anything after that because I did format which resulted in """ null imei """ without it the in-depth test app doesn't work, so the after process of bootloader unlocking and then rooting is unachievable, I can't downgrade with official ozip file given in realme website, I did that and it resulted in hard brick( basically without unlocking bootloader I can't do sh*t) , my device is up & running but without imei the further processes are stalled, I will try the method of using sn writer mentioned here..the repair guy even mentioned something about bin fine not found so he couldn't write imei, I have successfully used Maui Meta & SN Writer to write imei of my other mediatek chip containing device , but it didn't worked on realme3, yes you may have solved my problem of "" Download not Complete"" I have posted two pictures in the brick repair thread by @ATDteam . Thanx.
I will try to repair imei and post the outcome here.
Click to expand...
Click to collapse
If you want to unlock bootloader just use mtkclient ,its very simple.
And if you want my imei files i can provide you but you got to have twrp installed.BTW where are you from?
Tried mtkclient & mtksu app , didn't work, first I will write imei, then use in-depth test, then unlock bootloader, then downgrade, then root using mtksu.. fingers crossed
Ank Sak said:
Tried mtkclient & mtksu app , didn't work, first I will write imei, then use in-depth test, then unlock bootloader, then downgrade, then root using mtksu.. fingers crossed
Click to expand...
Click to collapse
What error did you faced when using mtkclient?
yas8say said:
What error did you faced when using mtkclient?
Click to expand...
Click to collapse
I cannot boot in fastboot mode ( I forgot to tell , in realme )
Mtk client:: shows this...
Daxflash - uploading stage 1 from mtkallinone_ da_5.2136.bin
Preloader
Preloader- [lib] : ?[ 31mError on DA_send cmd?[0m
Daxflash
Daxflash- [lib] : ?[31mError on sending DA.?[0m
Main
Main - [lib] : ?[31mError uploading da?[0m
Device formats,
First time some error
Now I ran second time python mtk xflash seccfg unlock
And now bootloader is unlocked !!! Cheers
I don't want to brick and I want to root , what must I do , pls give in steps.. Thnx
Should I directly install twrp img then magisk zip??
Orange state
Device is unlocked blah blah blah( same as lenevo)
But no fastboot mode
When use adb reboot bootloader
This comes up
The serial is not match
Fastboot_unlock_verify fail
Should I try using in-depth test app??
Ank Sak said:
Should I directly install twrp img then magisk zip??
Orange state
Device is unlocked blah blah blah( same as lenevo)
But no fastboot mode
When use adb reboot bootloader
This comes up
The serial is not match
Fastboot_unlock_verify fail
Should I try using in-depth test app??
Click to expand...
Click to collapse
TRY this:
python mtk w recovery recovery_name.img
then boot into recovery.
yas8say said:
TRY this:
python mtk w recovery recovery_name.img
then boot into recovery.
Click to expand...
Click to collapse
My device is realme3, it's on Android10 c.17, will I will be able to root with magisk ? Ok I will try.
No straight business,
Ok i tried, gave same error preloader dax main. .., so I switched off , as soon as the device turns off n pressed all three buttons to go into brom mode, the other cmd with python command ran and wrote twrp Spartan recovery,, then switched on, key combo didn't work, bcoz it was showing ' the serial is not match......' so I typed adb reboot recovery, it booted to realme UI recovery.
Surely have to downgrade to Android 9 to root & install recovery