Hello
Can anyone help. I set watch in download mode, AP. Cell phone can connect and it shows IP and ready for Odin.
But neither od the 4 pc will not connect, to be clear, pc connects to watch, but watch shown no IP, cant see Odin ready but have "connection timeout" red text scrolling.
PC's are, 2 win 7, different versions, and 2 win 10, different versions, and one laptop.
Suggestions?
Btw, watch works ok, but need to change csc.
Thank you
Related
I cannot seem to get ICS to work properly (win xp pro sp2)
I plug my laptop USB cable into the 8525, the laptop immediately initiates a connection between it and the 8525.
Laptop msg "local area conection 10 is now connected"
On the 8525, I go to ICS and click connect via USB.
Laptop msg "local area connection 14 is now connected"
IP looks like it was assigned but... i cant connect to internet on laptop. The tcp/ip connection details shows 11 packets sent... 0 received.
Any help would be very appreciates.
You don't have your Laptop's WiFi radio on, do you?
Also, ck to see in the ActiveSync settings if you have the dialog to allow wireless connections ck'd.
Tried the above suggestion... still nothing. I looked at the connection information (after selecting connect using ICS) and I do have an IP address but no gateway..
I see packets transmitted but 0 received.
there is a whole help section on your phone just click the help icon and type internet sharing
you have to uncheck the allow usb connections
its really simple to set up and get working really. Also use the search button up there and there many threads just on this topic.
scmguru said:
I cannot seem to get ICS to work properly (win xp pro sp2)
I plug my laptop USB cable into the 8525, the laptop immediately initiates a connection between it and the 8525.
Laptop msg "local area conection 10 is now connected"
On the 8525, I go to ICS and click connect via USB.
Laptop msg "local area connection 14 is now connected"
IP looks like it was assigned but... i cant connect to internet on laptop. The tcp/ip connection details shows 11 packets sent... 0 received.
Any help would be very appreciates.
Click to expand...
Click to collapse
I find it is best to activate Internet Sharing first, then press connect to activate the data connection to your cell provider, after that is says "check cable connection", at this time, connect the USB. Screen changes to connected and all is working.
If I connect the USB first, then my Vista laptop goes to connect via "Windows Mobile Device Centre"
hope that helps
tried all of the suggestions but still no good....... my ICS is working on windows xp but it aint working in vista
ICS cause a blue Screen
All,
I am using the wm6 verions rom and ICS causes my Win XP sp2 pc to blue screen. Any ideas. I could have swore it worked after reflashing it.
Hi,
Has anyone been able to successfully use the Intel WiFi Direct utility from a PC to connect with the SGH-i927 ?
My search research on the forums would tend to suggest it doesn't work. I found quite a few posts of people asking the same question for various Samsung devices and others. Samsung Handset to Samsung Handset seems to be fine but not from/to PC .....as there doesn't seem to be anything specific to our handset I post here.
Here's what I get...
1) Both WiFi Direct on the Handset and the PC Intel Dashboard locate each other,
2) When initiating the connection from the phone nothing happens
3) When initiating the connection from the laptop the phone responds with a prompt to accept the connection however once accepted nothing happens.
My Devices
Lenovo T420 Windows 7 Enterprise SP1
SGH-i927 Rooted Stock UCLJ3 4.0.4- SuperSU - Personally Debloated with Ti Backup
======================
Ok so I got hold of a copy of Qualcomm Atheros Direct Connect and installed on my Samsung R530 Laptop (AR9285WiFi Card)/ Windows 7 Home Premium SP3.
Here's what I get...
1) Both WiFi Direct on the Handset and the PC Atheros Direct Wif can see each other.
2) When initiating the connection from the phone connection completes phone/PC say 'Connected'
3) When initiating the connection from the laptop connection completes phone/PC say 'Connected'
When connected PC prompts for Network Connection location Internet/Home etc I selected Home ...any advice on what to do here ?
4) When sending a file from phone MyFiles...Share...WiFi Direct phone prompts for a WiFi Connect device and it doesn't list the connected PC ! .
What am I doing wrong ?
*************************************************
I spent some more time playing with the clients...I even managed to get the Samsung Laptop connected to the Phone at one point ...however I couldn't send anything between the two.
I couldn't even establish a proper connection between the two laptops let alone use the phone....and given the amount of feedback this is generating I doubt I will take this any further. I hope you guys have more luck than I did.
<E.O.M.>
My i5+ is not connecting to the android phone anymore... I tried with all the apps, viz, iWOWn, Zeroner, Zeroner health, nRF connection manager, DFU Mode, etc...
The device shows up under the available bluetooth devices as BRACELI5-9126, but doesn't connect at all. In all the apps, it tries to connect, but then fails. In nRF, it shows Connecting... then Discovering... then Disconnected.
It seems like the firmware is corrupted. Is there anyway to update/reset the firmware through USB from the Mac or PC?
PS. I've tried shutting the band down, and switching on again, switching on/off the bluetooth on phone, et. al. but no progress
My desktop has a hard connection to my network. Will I still be able to use Link To Windows?
I tried this on my Note 8 with the Windows My Phone software and I could never get it to work.
Thanks in advance,
Matt
Wifi only. Most modems have wifi.
You just have to be in the same network. My PC is connected to my network by Ethernet cable and doesn't have a WiFi card. It connects perfectly, including being able to show my phone screen
My Note 8 worked too like this.
i just tested this and I was able to use my pc thats on a wired connection. you have to launch/run an app called "your phone" and give your microsoft account permissions on your note 10.
this absolutely works with wired connections.
I have been trying to connect my Galaxy Watch Active 2 using GWS 2.0 (Beta) on my MacBook Air, but over wifi fails every time and SBDoverBT (Connection_Assitant.apk) is not in the location it says (or anywhere else) so I have not been able to connect my watch via bluetooth through my phone usb to Mac.
Anyone know how to get this connected??