My desktop has a hard connection to my network. Will I still be able to use Link To Windows?
I tried this on my Note 8 with the Windows My Phone software and I could never get it to work.
Thanks in advance,
Matt
Wifi only. Most modems have wifi.
You just have to be in the same network. My PC is connected to my network by Ethernet cable and doesn't have a WiFi card. It connects perfectly, including being able to show my phone screen
My Note 8 worked too like this.
i just tested this and I was able to use my pc thats on a wired connection. you have to launch/run an app called "your phone" and give your microsoft account permissions on your note 10.
this absolutely works with wired connections.
Related
We have a 3com wireless router at home. The laptop downstairs connects to it through a PCMCIA wireless adapter. My phone also connects to it fine, no probs at all.
However, we have a pc upstairs with no wireless on it at all. I have been told that I can use the phone to "simulate" a wireless connection to the router through its USB connection. I have tried this using the program Wireless Modem on the phone but to no avail. Windows XP keeps looking for a driver that a dont have and is not supplies on the CD that comes with the phone. Any ideas where I can get this driver from, or am I doing this just completely wrong...... :roll:
Thanks
There seems to be a growing amount of threads regarding the whole WiFi scenario.
I have experienced problems too. I have managed to configure the wifi and it picks up my belkin wireless router but it cant surf.
I am also using XP!
Your problem is slightly different to mine but I will have a go at your problem too.
GOOD LUCK!
Ok. JUst to update, i have found the drivers that install the the phone as a HTC USB Modem but im still having no luck. Im trying to simulate my phone as a wireless card to connect to my router downstairs.
Is this possible???
samething
Ive just got myself in the same situation. I have the XDA2i connected to my WIFI router fine, I can go on the WWW. Im now need to get my laptop into the loft where Im doing some work on an iriver H10 20gb (trying to construct a connection box as they arn't available until Sept!!!) I need the net access to look up pinouts on chips. I don't have a WIFI card for the laptop yet (should be here soon as on back order :evil: )
SO I want to use the PDA as a wifi card for my laptop through the usb port. How do i get the laptop to see the PDA as a network card and configured for this operation??
Cheers
Hello, I have been searching around for a day and a half now to no avail. I figure I will ask here as a last attempt before I go and buy another USB wifi adapter.
I am trying to use my HTC Dash with WM6.5 to tether an available wifi connection over to my Windows 7 PC. Basically trying to use the phone as a wifi adapter. The phone has no cell data service, but can connect to the home wifi network that is here. My Windows 7 PC has no Wifi adapter (I left it behind >.<).
Here is where I am at. The HTC Dash is connected to the Wifi network, and when I try to select a Network in the ICS program, it says there is none available. I have been able to get USB selected in ICS, and the phone connected to the computer. In Windows I see a Windows Mobile Remote Adapter in the Network Connections area when I sync the device in Windows Mobile Center. But no matter what I try, ICS sharing on the phone will not let me select the Wifi connection it has.
Through my searching I have found a lot of information on tethering 2G and 3G internet through USB, and using the phone as a Wifi Hotspot. But those where no help in this.
My friend on a G1 with Andriod can tether Wifi connections to a pc, and I am wondering if Windows Mobile can do the same thing. I can flash my ROM from to 6.0 or 6.1 WM if needed.
Thanks in advance to any advice given, hopefully someone can help me out
UPDATE: Still have no luck. I found a program called ICS Control v.21, but it only works on touchscreen WM phones, not WM standard. Which means a bunch of crashing.
This program would do exactally what I need it to do... just does not support my phone. Well the search continues... looking like I may just have to go buy an USB Wifi adapter soon.
tethering w/wifi
It does work. I'm currently answering this on my 2nd desktop Vista with my S620 via my home wifi network. Waiting for a 25' ethernet connector to hardware to wifi/modem Not quite sure how it is with a wifi adapter but 2 things I do know from experience. You shouldn't need an adapter.
1st: you can't be in Sync Center while trying to tether, at least in my case on a Vista desktop. It won't let you tether while the sync is running (or your already synced).
2nd: (this worked for me) open internet sharing on your Dash/S620, pc connection-usb and be ready to hit connect the 1st couple of seconds after pluging your usb connector into your phone, and give it 10-20 seconds to actually connect. If you wait to long to hit connect, the phone will start syncing with the computer. Won't let you tether.
RE-read post, missed thar "WinMo" remote part. My bad. Don't own Win 7. Don't know what that is.
Question: Is there an active wifi where you are ? From your post it sounds like "yes"
You do not need a wifi adapter. You do need a USB cord.
I tethered with edge for a bit, but then got to thinking. Try Wifi. It worked, but be quick.
Neither one is super fast but Wifi is definitely faster than Edge. Better than not being on the net at all. Occasionally it'll cut out, just unplug usb, get to connect screen, plug in and hit connect. Should be set.
As a side note: I also tried tethering with G1. Xferd pc driver to Vista from G1 but computer says it can't find the driver. Gave up after 2 hours.
G1 tethering works great on XP though.
Hope this helps. Good Luck. Really cool when it works.
Are you using a wifi tether or just usb?
If wifi, what program/version are you using and where did you get it? I got the ICS usb tether working, but my version of wmwifirouter.cab won't even install on the dash. cheers
ee.mike said:
Are you using a wifi tether or just usb?
If wifi, what program/version are you using and where did you get it? I got the ICS usb tether working, but my version of wmwifirouter.cab won't even install on the dash. cheers
Click to expand...
Click to collapse
I'll have to break out the Dash again and let you know. It's been sitting for weeks since I repaired LCD screen and flashed my TMO Wing. Can't seem to stop playing with it.
Give me a little time and I'll get back to you.
You do have a wifi modem, correct ? I was using usb.
Right, just to be clear, my goal is to set up my Dash to receive it's edge data and transmit that out as a wifi signal that my laptop will pick up and connect to the internet. No USB connection. I'm getting an ipad eventually and this is all to avoid that stupid 3g garbage they're hawking.
I tried a program called wmwifirouter.cab but was unsuccessful. An ad-hoc wifi network was created by my phone and my laptop was connected to it but couldn't connect to the internet. And my phone kept crashing.
Any ideas? Thanks
ee.mike said:
Right, just to be clear, my goal is to set up my Dash to receive it's edge data and transmit that out as a wifi signal that my laptop will pick up and connect to the internet. No USB connection. I'm getting an ipad eventually and this is all to avoid that stupid 3g garbage they're hawking.
I tried a program called wmwifirouter.cab but was unsuccessful. An ad-hoc wifi network was created by my phone and my laptop was connected to it but couldn't connect to the internet. And my phone kept crashing.
Any ideas? Thanks
Click to expand...
Click to collapse
Well, in your case, I won't be any help. What I did was run a 2nd computer off of my Dash with a Wifi Modem.
XP in another room with a wifi modem attached on Comcast, Dash on wifi and usb to Vista computer, since I didn't have a 25ft ethernet cable at the time.
Was running Vista-Dash-wifi modem-XP to comcast so I could run 2nd computer without being hard wired.
I'm familiar with wifirouter cab. It let's you use your phone like a hotspot, correct ?
In all my searches for various things for the phones, I thought I saw a different application that did the same thing. Possibly might even have it. I'll check and upload for ya if I find it. Have hundreds of cabs/zips to search. Let you know.
Possibly google it and you might find it yourself. There's a program called: WalkingHotSpot online for $24.99 if you don't mind spending. Dash isn't listed as a supported windows device but looking at the other phones listed my guess would be it should work. Try their DEMO version, see if it works.
Good Luck.......
2AM and I was just wondering......When you received your phone, you also got a usb cable with it, right ?
Why don't you just usb Dash to laptop and use "internet sharing" ????
My plan is to set this up for an iPad, which doesn't allow internet access over a USB cable, so USB tethering is out, has to be wifi.
ee.mike said:
My plan is to set this up for an iPad, which doesn't allow internet access over a USB cable, so USB tethering is out, has to be wifi.
Click to expand...
Click to collapse
Do you have a home computer ? If so, get yourself a Wifi Modem and set up a home network. $40-60. Although Comcast sold me mine for $20 and I get to keep it. I can get all 5 phones on the internet at the same time, not that I need to. It'll also be so much faster then running thru Edge. Besides the fact video's don't play for crap tethered running through Edge. Just a suggestion.
My opinion stands concerning Apple. Get ready to cough up more fees for internet (ATT). They're doing away with unlimited data. Did you see their prices ?
You'll never catch me with ATT.
I just put WMWifiRouter on my TMO Wing 6.5. let you know how it worked. Setup went fine, so far.
did you try downloading the actual .cab from WMWIFIROUTER.COM it's only a trial for 21 days, the "Free" versions don't work on the dash i've tried many of them.
once you install and get it set up be sure to write down the Access ID and Password it gives you so you can connect to the WiFi signal beaming from your phone from your PC. It works for me to tether a WiFi connection from my Dash to PC though I prefer the more stable Internet Sharing USB to PC and I have an Unlimited Data Plan.
WMWIFIROUTER also lets you tether a connection from your phone via bbluetooth.
I use WMWiFiRouter and its a life saver. It lets you pretty much tether any connection to any other.
Just yesterday I was at a meeting in a resturant with some clients and used it to hook my netbook to the internet and used bluetooth as the connection to the phone. Yes, Internet Sharing can do that, but it has alot more it can do too.
You can use Bluetooth, USB (it shows up as a USB modem), or even set it up as a WiFi Router.
Very cool program and it works perfectly on the Dash. I love it.
I never tried the trial version. A friend of mine showed it to me, so I just bought it. It's under $20. Well worth it if you run into that situation often.
So I've been using the Tom coding package that installs the mobile Wi-Fi router with no problems until last night... now it keeps trying to connect to ISP.Cingular and then stops... it basically doesn't work now. I've tried to uninstall and reinstalled it dozens of times with no luck.
And yet... the 3G connection works because I can browse through Opera. So...?
OhI might add that I can turn on the Wi-Fi and connect to my in-house router just fine and do what on the internet through the phone. SO... it is definitely something specific with wireless internet sharing.
???
Someone please he me I use internet sharing DAILY
You need to make sure that it is connecting to the correct address. At the bottom of the App, it should have a few different choices of connections to use. Try another one and see if it works. You may have to set up a new connections for this to work properly. Keep in mind that tethering/mobile hotspot is not covered by AT&T's wireless data plan. It is a separate monthly charge. You should be careful when using it too much at a time, so they don't block or throttle your connection.
The device I am trying to connect with to my Tilt 2 is a Samsung Galaxy Tab, and apparently it doesn't like ad-hoc, whatever that is exactly. I was told on the Galaxy Tab section of this forum that this is the case, and that I need some kind of "mobile ap", although again I do not understand what that exactly means. ???
Ah, see that's much better information. So, no, you probably won't be able to connect without another app doing so. Ad-hoc is, simply put, a connection to another device other than a router which is allowing you access to its Internet connection. If the device you're trying to connect with doesn't allow ad-hoc connections, then the Wifi Router app won't do you any good, as that is the type of connection it uses. Most mobile devices do not natively support this, however. The problem, therefore, is with the Galaxy Tab you have, not with the TP2. Find an app or mod that allows for ad-hoc connections and you'll be all set.
Well is there an apparently for the WM phone side of things that will do non ad-hoc??
No. Ad-hoc is a connection between two devices. Unless you use a router, that's how it's going to be no matter if you are using WM, a laptop, iOS, Android, et cetera. The connection type is determined by the device sending the signal. If it comes from a device, then it is ad-hoc. It is not a problem with the software. That is how wifi was designed to work in the first place. The problem, again, is with the Tab, not the WM application.
Well apparently there is a solution for the Tab that allows it to see ad-hoc networks, so I will try that and let you guys know how it went.
Can no longer connect to Ad-Hoc with Tilt 2
I have been using both the CM Internet Sharing program and the WMWifiRouter with no issues for over a year now on my AT&T Tilt 2.
One day a couple weeks ago I had been using CM to connect my laptop to the internet. everything was just fine as usual.
At some point, I had disconnected and tried to reconnect, and since then I can no longer use either of these programs.
What happens is this...I turn them on and the phone will no longer hold a connection to the ad-hoc network that is created. Up in the status bar I see the icon showing WiFi trying to connect but it will not stick anymore.
I can connect to my office and/or home wifi router still. It just will not connect to the ad-hoc network any longer.
This makes no sense to me at all, since it has always worked and was even working earlier in the day when it stopped working.
I use the tethering frequently and really need to get this solved. Any help would be greatly appreciated.
I am having a problem tethering my laptop and my desktop computer to my Galaxy Nexus ever since I installed the 4.2 update. My Nexus 7 tablet does not seem to have any issues connecting.
My laptop is a Lenovo Thinkpad T60-2007 which has an Atheros 42T0825 wifi chip. It used to connect to the Android 4.1 Galaxy Nexus hotspot without any problems under Win XP. Immediately following upgrading the Galaxy Nexus to Android 4.2 the laptop had problems. The laptop would connect to the tethering wifi hotspot, but would not be able to browse the internet (or in a few rare circumstances, would browse extremely slowly with frequent errors that would prevent web pages from loading).
I tried a factory reset on the Galaxy Nexus (which still left the phone at android 4.2), and there was no change in behavior.
I tried removing the wifi password and running the hotspot as an 'open network' and there was no change in behavior.
I tried a Windows XP reinstall on the laptop (to Windows XP SP3) and there was no change in behavior.
I replaced the wifi card (with and identical model) and there was no change in behavior
As a last resort (and because the laptop needed it), I installed Windows 7 Ultimate 64-bit on a new SSD and put in additional 2 GB of RAM.
Now although the laptop can still see the hotspot, it cannot connect to it. Even though the correct password is typed at the prompt, it gives a 'Network Security Key mismatch' error and will not connect. The laptop can connect to the hotspot if it is set as 'open', but will not connect to any sites or web pages (i.e. same problem as before with Win XP).
The laptop *does* work with the Galaxy Nexus via USB tethering, which suggests that there is some kind of wifi issue, but the laptop connects to my home wifi network (Linksys E3000 running stock firmware) just fine.
My desktop computer (running Windows 7) exhibits the same behavior as the laptop under Windows 7.
I was able to get a Macbook and a Dell Latitude laptop to connect to the wifi hotspot and successfully browse the internet (I will have to look up the model numbers later).
I am writing to try to find out whether anyone has noticed any similar problems/incompatibilities and whether anyone might know the causes.
Is there a problem with the b/g/n connectivity of my laptop? Did the wifi hotspot b/g/n configuration on Android change with the 4.2 update? Might a bad install of android 4.2 on my phone be to blame? Maybe there is a problem with g or n protocols? Which does the 4.2 hotspot use?
Thanks in advance
same problem with me
Tarzanman said:
I am having a problem tethering my laptop and my desktop computer to my Galaxy Nexus ever since I installed the 4.2 update. My Nexus 7 tablet does not seem to have any issues connecting.
My laptop is a Lenovo Thinkpad T60-2007 which has an Atheros 42T0825 wifi chip. It used to connect to the Android 4.1 Galaxy Nexus hotspot without any problems under Win XP. Immediately following upgrading the Galaxy Nexus to Android 4.2 the laptop had problems. The laptop would connect to the tethering wifi hotspot, but would not be able to browse the internet (or in a few rare circumstances, would browse extremely slowly with frequent errors that would prevent web pages from loading).
I tried a factory reset on the Galaxy Nexus (which still left the phone at android 4.2), and there was no change in behavior.
I tried removing the wifi password and running the hotspot as an 'open network' and there was no change in behavior.
I tried a Windows XP reinstall on the laptop (to Windows XP SP3) and there was no change in behavior.
I replaced the wifi card (with and identical model) and there was no change in behavior
As a last resort (and because the laptop needed it), I installed Windows 7 Ultimate 64-bit on a new SSD and put in additional 2 GB of RAM.
Now although the laptop can still see the hotspot, it cannot connect to it. Even though the correct password is typed at the prompt, it gives a 'Network Security Key mismatch' error and will not connect. The laptop can connect to the hotspot if it is set as 'open', but will not connect to any sites or web pages (i.e. same problem as before with Win XP).
The laptop *does* work with the Galaxy Nexus via USB tethering, which suggests that there is some kind of wifi issue, but the laptop connects to my home wifi network (Linksys E3000 running stock firmware) just fine.
My desktop computer (running Windows 7) exhibits the same behavior as the laptop under Windows 7.
I was able to get a Macbook and a Dell Latitude laptop to connect to the wifi hotspot and successfully browse the internet (I will have to look up the model numbers later).
I am writing to try to find out whether anyone has noticed any similar problems/incompatibilities and whether anyone might know the causes.
Is there a problem with the b/g/n connectivity of my laptop? Did the wifi hotspot b/g/n configuration on Android change with the 4.2 update? Might a bad install of android 4.2 on my phone be to blame? Maybe there is a problem with g or n protocols? Which does the 4.2 hotspot use?
Thanks in advance
Click to expand...
Click to collapse
i am also facing the same problem when i try to connect to any wi-fi network. it stucks on obtaining ip address. even though the password is correct. even i tried hotspot way to connect. via different s/w like connectify even i tried to make hotspot via cmd shell commands too. in that same it is not able to connect.
i dont know what the problem. i am currently using 4.2.1 rooted JB. i am planning for factory reset. but as you did earlier and no success so i might not do.
even with open wifi network it is not able to connect..!! it happen after the update..
deeprocks31 said:
i am also facing the same problem when i try to connect to any wi-fi network. it stucks on obtaining ip address. even though the password is correct. even i tried hotspot way to connect. via different s/w like connectify even i tried to make hotspot via cmd shell commands too. in that same it is not able to connect.
i dont know what the problem. i am currently using 4.2.1 rooted JB. i am planning for factory reset. but as you did earlier and no success so i might not do.
even with open wifi network it is not able to connect..!! it happen after the update..
Click to expand...
Click to collapse
The inability to either create a mobile hotspot and connect to it is why I went back to stock rooted 4.1.1. I have tried Muzzy and AOKP and could not create and connect to a hotspot using native tethering or Wifi Tether. It has been a while since I checked the forums, but did not see a solution that helped me
PS - I was trying to tether mobile devices not laptops though
My issue resolved on its own...!! Don't know how..!! but now I can use WiFi tether and also reverse tethering too..!! Reverse tethering is really too handy thanks to xda members for making awesome apps.
Sent from my Galaxy Nexus using xda premium
Tarzanman said:
I am having a problem tethering my laptop and my desktop computer to my Galaxy Nexus ever since I installed the 4.2 update. My Nexus 7 tablet does not seem to have any issues connecting.
My laptop is a Lenovo Thinkpad T60-2007 which has an Atheros 42T0825 wifi chip. It used to connect to the Android 4.1 Galaxy Nexus hotspot without any problems under Win XP. Immediately following upgrading the Galaxy Nexus to Android 4.2 the laptop had problems. The laptop would connect to the tethering wifi hotspot, but would not be able to browse the internet (or in a few rare circumstances, would browse extremely slowly with frequent errors that would prevent web pages from loading).
I tried a factory reset on the Galaxy Nexus (which still left the phone at android 4.2), and there was no change in behavior.
I tried removing the wifi password and running the hotspot as an 'open network' and there was no change in behavior.
I tried a Windows XP reinstall on the laptop (to Windows XP SP3) and there was no change in behavior.
I replaced the wifi card (with and identical model) and there was no change in behavior
As a last resort (and because the laptop needed it), I installed Windows 7 Ultimate 64-bit on a new SSD and put in additional 2 GB of RAM.
Now although the laptop can still see the hotspot, it cannot connect to it. Even though the correct password is typed at the prompt, it gives a 'Network Security Key mismatch' error and will not connect. The laptop can connect to the hotspot if it is set as 'open', but will not connect to any sites or web pages (i.e. same problem as before with Win XP).
The laptop *does* work with the Galaxy Nexus via USB tethering, which suggests that there is some kind of wifi issue, but the laptop connects to my home wifi network (Linksys E3000 running stock firmware) just fine.
My desktop computer (running Windows 7) exhibits the same behavior as the laptop under Windows 7.
I was able to get a Macbook and a Dell Latitude laptop to connect to the wifi hotspot and successfully browse the internet (I will have to look up the model numbers later).
I am writing to try to find out whether anyone has noticed any similar problems/incompatibilities and whether anyone might know the causes.
Is there a problem with the b/g/n connectivity of my laptop? Did the wifi hotspot b/g/n configuration on Android change with the 4.2 update? Might a bad install of android 4.2 on my phone be to blame? Maybe there is a problem with g or n protocols? Which does the 4.2 hotspot use?
Thanks in advance
Click to expand...
Click to collapse
I have not been able to get any form of wifi AP to work since flashing over to 10.1 CM. it turns on the AP and I can get wifi to link but can't get an IP and any kind of connectivity to the internet... so far, I haven't been able to find any help for the issue but I'll keep reading!
this was after a wipe data & cache install of 10.1.
Has anyone sucesfully managed to tether their 4G gemini to a laptop, to share mobile data?
I've tried WiFi hotspot and USB tethering and I'm having no luck. The laptop gets an IP and gateway address from the Gemini but still can't connect to the internet.
I have no problems when I tether using a different phone.
If someone with a 4G gemini and a laptop could give it a go and let me know if it works for them, it would be really helpful.
Thanks!
Tom
Wi-Fi and Bluetooth tethering works fine for me.
Maybe tethering is blocked by your carrier.
FIle transfers do not work either
teb22 said:
Has anyone sucesfully managed to tether their 4G gemini to a laptop, to share mobile data?
I've tried WiFi hotspot and USB tethering and I'm having no luck. The laptop gets an IP and gateway address from the Gemini but still can't connect to the internet.
I have no problems when I tether using a different phone.
If someone with a 4G gemini and a laptop could give it a go and let me know if it works for them, it would be really
helpful.
QUOTE]
When connecting USB to usbC , the Win laptop claims connection exists, but permission to connect is missing. Hence it would seem that Gemini or Android is incapable of registering a physical connection (even if it reports slow charging" when at an USB2 port as opposed to USB3.)
p.
Click to expand...
Click to collapse
I would really prefer a cabled connection to hack exposed and battery-eating wireless methods, so any advice is welcome. I tried to hook up and mount the Gemini so as to use the versatile file handler MC on it at my lange stationary Linux machine, but it seemed to be "invisible". (My Gemini is the pure android latest available version, not rooted.)
p.