Hi, a friend have 2 pda universal from vodafone that he has flashed and killed. I don´t know what happend. pda always shows USB and v1.00. After a lots o rom updates still dead, i have JAFWM, but with or without this machine is dead.
any rom especial version?
any soft?
thanks.
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
device always start in bootloader mode, i flash all times without problems, but when i restart device, automatically puts on bootloader mode.
after flash, make factory settings but,after this, restart in same mode.
always, when i run update program soft MaUpgradeUt_noID, detects no rom in pocket loaded.
strange problem on 2 pda´s ?
thanks
That shouldn't be a problem. Just continue to flash the rom. There could be a problem with your bootloader and the upgrade version (AKU2) you want to use.
Maybe it's a problem with bootloader.
Try it, maybe it will help you.
http://forum.xda-developers.com/download.php?id=11414
i think same as you, only problem with ROM image, but i have flashed many roms but I can´t revive device. So i ask name of Rom tht can revive pda.
Br.
PD. how i can flash the archive attached?
The rar file mentioned above is only the bootloader you already got on your device.
In your case i would use an old AKU1 rom and to see if it works.
hi guys
i have same problem. show only boot loader mode. how to use this boot loader file. wich AKU1 file is working. my phone is MDA PRO from germany T-mobile, i wan't to update ro to English. after flashing many times, many rom no result. help me
thanks a lot
Hello Siemens Man
Which Bootloader do you have ?
It would be great if you could make an backup of your bootloader then, that i could downgrade my phone and try to unlock it.(If do not know how to make an backup, thats no problem, because i can show you how to do it)
greetz
hi man
i have in boot loader mode. show me usb v1.00 only. i don't have buck up for my phone. please tell me solution how repair my phone.
thanks a lot
Did you try to update your phone to the latest orange rom for testing yet ?
If not try it out (I know it is said to be slow, but only if all orange customizations are installed) If it runs then its ok.
Otherwise try to use the exitbl.exe mentioned somewhere in this forum, hopefully it works.
connect to mtty and issue set 14 0 and then restart the device or use exitbl utility by buzz
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
are there any useful hints extrem69 ?
no usb mode
What can i do of my Qtek 9000 doesen't change from Serial to USB mode?
siemens man said:
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
Click to expand...
Click to collapse
I had same problem like you, can you tell me what exactly did you do so you can repaire your phone.
I used T-mobie and didn't work after upgrade rom too, it's alway stop in boot loader screen. I tried up rom of T-mobile, Imate, Dopod but nothing to work, I don't know how to repair it, it's still can up rom normaly, nothing wrong while upgrade, it's only don't work after finish.
wooooooooooooooooooow
many thanks
i tried many ways to solve this problem
with your advuse it is working now.................
Lt.Cmdr.Ivan said:
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
Click to expand...
Click to collapse
HI to all! I have lost bootloader upgrading my qtek 9000 vodafone.
can i to solve problem? No bootloader menu, i have tried power+reset+lamp, power+reset+camera - herd reset with - + - reset without effect. Pse help me!!! Thanks.
Hello everybody,
I have tried to upgrade my Diamond with a new Radio ROM but it didn't work.
Now I'm blocked to a screen wich says :"
"Upgrade ROM code Error"
Even I have tried to make a har reset, I always obtain this screen.
Is there a way to connect the Diamond to my PC with the usb cable in order to delete the bad file (Radio ROM).
If it's possible, i think, it will boot normally ...
Thanks a lot !
Enter bootloader mode and reflash another Radio.
How can I do to enter in Bootloader Mode ???
danaobrest78 said:
How can I do to enter in Bootloader Mode ???
Click to expand...
Click to collapse
Google as well as the search function of this forum both know.
here you go
hope this helps
http://forum.xda-developers.com/showthread.php?t=405659
ALL GREETINGS!!! Prompt who knows how to load new OS into the smartphone? Or who has an experience of dialogue with the Chinese colleagues, to ask a question lupinlau here http://bbs.koxo.cn/viewthread.php?tid=70990&extra=page=1&filter=type&typeid=149 At me it has not turned out to be registered there (((((((Thanks for answers. P.S. Interestingly, really at anybody and it has not turned out to find a way how to enter into a bootloader mode on this smartphone..............? I only could find how to enter into an updating mode through T-Flash, but is not clear yet, what with it to do?
Hello I've got and Alrikfra missing and tried irreversible ways Alaudin and applied
Information and connect two Alaudin but tell me FAIL ČÓ heck with brief setup connection and Create file Mahve uncle have Atansb correct way or not, please help me To download under the yellow label 113 and not getting Shi and separated Alaudin and operate the device shows me firmware upgrade encountered an issue pleease select recovery mode in kies try again Knowing two Galaxy W i8150:crying::crying::crying::crying:
70 View MACON Re Help
Hello there,
I am new to this forum and android as well.
I have xolo play cell phone which is recently being useless because of too many times pattern attempts.
I know email and password but which is not useful as my internet connection is disable.
I also activated xolo secure due to that i am unable factory reset in recovery ( it says first you'll have to unlocked xolo secure but phone is locked) .
I also disable the usb debugging because i use many time to take data or download using cellphone...PC.
BUT
But the thing which i came across is i boot phone in "factory test" mode due to that i think my usb debugging on for that time i am able to view directory in phone by cmd (adb) and able to reboot using command prompt:.
Now you guys work on android from so much long time is any one know command from which i can factory reset my phone
I dont want to take my cell to customer care because i rooted my phone.
Lastly if no option i have to go customer care support.
dhakeparag81 said:
Hello there,
I am new to this forum and android as well.
I have xolo play cell phone which is recently being useless because of too many times pattern attempts.
I know email and password but which is not useful as my internet connection is disable.
I also activated xolo secure due to that i am unable factory reset in recovery ( it says first you'll have to unlocked xolo secure but phone is locked) .
I also disable the usb debugging because i use many time to take data or download using cellphone...PC.
BUT
But the thing which i came across is i boot phone in "factory test" mode due to that i think my usb debugging on for that time i am able to view directory in phone by cmd (adb) and able to reboot using command prompt:.
Now you guys work on android from so much long time is any one know command from which i can factory reset my phone
I dont want to take my cell to customer care because i rooted my phone.
Lastly if no option i have to go customer care support.
Click to expand...
Click to collapse
http://www.sendspace.com/file/t5cw1x
Instructions for upgrading the software.
1. Please copy the software in sdcard
2. Ensure the name of the folder is us9230.v2
3. Press power key and center of volume up & Down key at the same time
4. A message saying " Updating ... Pleaes do not press any keys " will appear
5. Please be patient till the update gets complete, approx takes around 5 min.
6. Phone will get shut down automatically.
NOTE:
unzip the file and copy contents to sd card... all contents should be in the folder named 'us9230.v2'
dhakeparag81 said:
Hello there,
I am new to this forum and android as well.
I have xolo play cell phone which is recently being useless because of too many times pattern attempts.
I know email and password but which is not useful as my internet connection is disable.
I also activated xolo secure due to that i am unable factory reset in recovery ( it says first you'll have to unlocked xolo secure but phone is locked) .
I also disable the usb debugging because i use many time to take data or download using cellphone...PC.
BUT
But the thing which i came across is i boot phone in "factory test" mode due to that i think my usb debugging on for that time i am able to view directory in phone by cmd (adb) and able to reboot using command prompt:.
Now you guys work on android from so much long time is any one know command from which i can factory reset my phone
I dont want to take my cell to customer care because i rooted my phone.
Lastly if no option i have to go customer care support.
Click to expand...
Click to collapse
Dear Member...
here is the solution to wipe in fatboot mode...
connect phone to pc in fastboot by pressing Volume+ & Power...
enter the following command to communicate with phone....
1. fastboot -i 0x0955 reboot-bootloader
2. fastboot -i 0x0955 -w
3. fastboot -i 0x0955 reboot
That's all....:fingers-crossed:
How did you open dat factory test mode... i cant get to open dat... and did u solve ur problem...I m da same trouble...
Thank you man but facing a new problem
jaspuneet;48743356
Instructions for upgrading the software.
1. Please copy the software in sdcard
2. Ensure the name of the folder is us9230.v2
3. Press power key and center of volume up & Down key at the same time
4. A message saying " Updating ... Pleaes do not press any keys " will appear
5. Please be patient till the update gets complete said:
Hi,
XDAForums has saved my life before as well. Thank you for posting this solution. This works and phone has been factory reset and unlocked, however it doesn't say SD card data will be wiped out. My SD card now doesn't show any files or app. Phone detects SD, but no files and can't detect any apps. However SD card is not empty. I am not much of a technical guy, is there any way to reinstate apps from SD card?
Thank you in advance.
Regards
Click to expand...
Click to collapse
how to unlock xolo q500 while in pattern lock
i am also same problem
but my phone is xolo q500 help me to out of it
I'm using xolo q1100 i try to recover my xolo secure password but it failed. Can this app helpful?
Sent from my Q1100 using XDA Free mobile app
how to enter in full item test or manual item test in xolo play 8x 1020 help me plz